Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, IL 60069 | 1.416.970.6612 phone | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 1, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: UZ7KC50A15 [Zebra Technologies Corporation] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, __________________ Dharmajit Solanki [email protected] Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, IL 60069 | 1.416.970.6612 phone | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 1, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: UZ7KC50A15 [Zebra Technologies Corporation] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, __________________ Dharmajit Solanki [email protected]
Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I L 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m Date: July 30, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7KC50A15 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Internal Photos Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I L 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m External Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. ________________________ Dharmajit Solanki [email protected]
Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I L 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m Date: July 30, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7KC50A15 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Internal Photos Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I L 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m External Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. ________________________ Dharmajit Solanki [email protected]
Labellocation Under the back cover of thedevice The label becomes visible to users when the back cover is removed to install the device.
Date: 2024-07-05 System Check_Head_13MHz DUT: CLA-13 - SN1022 Communication System: CW; Frequency: 13.000 MHz Medium: HSL_13_240705 Medium parameters used: f= 13.000 MHz; σ= 0.728 S/m; ε r = 54.7 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY6 Configuration: - Probe: EX3DV4 - SN3931; ConvF(18.48, 18.48, 18.48); Calibrated: 2023-10-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn376; Calibrated: 2023-09-14 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW Pin=30.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.517 W/kg; SAR (10g) = 0.418 W/kg; Pin=30.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = -0.01 dB SAR (1g) = 0.505 W/kg; SAR (8g) = 0.322 W/kg; SAR (10g) = 0.317 W/kg Smallest distance from peaks to all points 3 dB below = 16.8 mm Ratio of SAR at M2 to SAR at M1 = 78.4 % Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/5/29 System Check_Head_2450MHz DUT: D2450V2-929 Communication System: UID 0, CW ; Frequency: 2450 MHz Medium: HSL_2450_240529 Medium parameters used : f = 2450 MHz; σ = 1.793 S/m; ε r = 39.516; ρ = 1000 kg/m 3 Ambient Temperature：23.4 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7590; ConvF(7.74, 7.6, 7.6) @ 2450 MHz; Calibrated: 2024/3/19 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1776; Calibrated: 2024/2/13 - Phantom: ELI V4.0; Type: QD OVA 001 Bx; Serial: 1164 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 4.15 W/kg Pin=50mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 50.49 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 4.98 W/kg SAR(1 g) = 2.52 W/kg; SAR(10 g) = 1.19 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 51.2% Maximum value of SAR (measured) = 4.12 W/kg 0 dB = 4.12 W/kg = 6.15 dBW/kg Date: 2024-06-24 System Check_Head_2450MHz DUT: D2450V2 - SN929 Communication System: CW ; Frequency: 2450.000 MHz Medium: HSL_2450_240624 Medium parameters used: f= 2450.000 MHz; σ= 1.80 S/m; ε r = 40.3 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(7.72, 7.83, 7.84); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2055; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.54 W/kg; SAR (10g) = 1.15 W/kg; Pin=17.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = -0.04 dB SAR (1g) = 2.60 W/kg; SAR (8g) = 1.31 W/kg; SAR (10g) = 1.18 W/kg Smallest distance from peaks to all points 3 dB below = 8.0 mm Ratio of SAR at M2 to SAR at M1 = 79.4 % Date: 2024-07-01 System Check_Head_5250MHz DUT: D5GHzV2 - SN1006 Communication System: CW ; Frequency: 5250.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5250.000 MHz; σ= 4.69 S/m; ε r = 36.9 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(5.99, 5.92, 5.94); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.86 W/kg; SAR (10g) = 1.13 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.02 dB SAR (1g) = 4.28 W/kg; SAR (8g) = 1.38 W/kg; SAR (10g) = 1.18 W/kg Smallest distance from peaks to all points 3 dB below = 6.6 mm Ratio of SAR at M2 to SAR at M1 = 64.6 % Date: 2024-07-01 System Check_Head_5600MHz DUT: D5GHzV2 - SN1006 Communication System: CW ; Frequency: 5600.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5600.000 MHz; σ= 5.04 S/m; ε r = 36.4 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(4.92, 4.83, 4.83); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.73 W/kg; SAR (10g) = 1.12 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.03 dB SAR (1g) = 4.04 W/kg; SAR (8g) = 1.34 W/kg; SAR (10g) = 1.15 W/kg Smallest distance from peaks to all points 3 dB below = 7.3 mm Ratio of SAR at M2 to SAR at M1 = 62.3 % Date: 2024-07-01 System Check_Head_5800MHz DUT: D5GHzV2 - SN1128 Communication System: CW ; Frequency: 5800.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5800.000 MHz; σ= 5.26 S/m; ε r = 36.1 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(4.96, 4.83, 4.83); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=20.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 8.05 W/kg; SAR (10g) = 2.33 W/kg; Pin=20.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.01 dB SAR (1g) = 8.51 W/kg; SAR (8g) = 2.80 W/kg; SAR (10g) = 2.41 W/kg Smallest distance from peaks to all points 3 dB below = 7.4 mm Ratio of SAR at M2 to SAR at M1 = 62.0 % Date: 2024-07-02 …
Text truncated - open the document above for the full version.
Scans Setup Scan Type5G Scan Grid Extents [mm]120.0 x 120.0 Grid Steps [lambda]0.25 x 0.25 Sensor Surface [mm]10.0 Measurement Results Date2024-06-29 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 61.4 psPDtot+ [W/m 2 ] 61.6 H max [A/m]0.436 E max [V/m]164 max (Stot) [W/m 2 ] 69.3 Power Drift [dB]0.10 IPDn112 Measurement Report for Device Device Under Test Properties Model, ManufacturerDimensions [mm]Software VersionDUT Type Device,70.0 x 50.0 x 8.03.2.0.18405G Verification Source Exposure Conditions Phantom SectionPosition, Test Distance [mm]Frequency [MHz]Conversion Factor 5GFront, 10.0010000.01.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave - 1109Air -EUmmWV4 - SN9441_F1-55GHz, 2023-11-17DAE4 Sn656, 2024-01-18
Date: 2024-06-24 #01_WLAN2.4GHz_802.11b 1Mbps_Front Face_0mm_Ch11 Communication System: IEEE 802.1 1b; Frequency: 2462.000 MHz Medium: HSL_2450_240624 Medium parameters used: f= 2462.000 MHz; σ= 1.82 S/m; ε r = 40.2 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(7.72, 7.83, 7.84); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2055; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10415-AAA Area Scan (240.0 mm x 100.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.55 W/kg; SAR (10g) = 1.19 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = 0.01 dB SAR (1g) = 2.81 W/kg; SAR (8g) = 1.42 W/kg; SAR (10g) = 1.28 W/kg Smallest distance from peaks to all points 3 dB below = 12.7 mm Ratio of SAR at M2 to SAR at M1 = 82.3 % Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = 0.01 dB SAR (1g) = 0.759 W/kg; SAR (8g) = 0.446 W/kg; SAR (10g) = 0.413 W/kg Smallest distance from peaks to all points 3 dB below = 12.7 mm Ratio of SAR at M2 to SAR at M1 = 82.3 % Date: 2024-07-01 #02_WLAN5GHz_802.11ax-HE40 MCS0_Front Face _0mm_Ch 54 Communication System: IEEE 802.11ax; Frequency: 5270.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5270.000 MHz; σ= 4.71 S/m; ε r = 36.8 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(5.99, 5.92, 5.94); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10707-AAC Area Scan (260.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.793 W/kg; SAR (10g) = 0.270 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.04 dB SAR (1g) = 0.776 W/kg; SAR (8g) = 0.282 W/kg; SAR (10g) = 0.243 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 64.4 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.04 dB SAR (1g) = 0.631 W/kg; SAR (8g) = 0.239 W/kg; SAR (10g) = 0.209 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 64.4 % Date: 2024-07-01 #03_WLAN5GHz_802.11ax-HE40 MCS0_Front Face _0mm_Ch110 Communication System: IEEE 802.11ax; Frequency: 5550.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5550.000 MHz; σ= 5.00 S/m; ε r = 36.4 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(4.92, 4.83, 4.83); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10707-AAC Area Scan (260.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.961 W/kg; SAR (10g) = 0.332 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.04 dB SAR (1g) = 0.996 W/kg; SAR (8g) = 0.353 W/kg; SAR (10g) = 0.304 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 63.9 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.04 dB SAR (1g) = 0.977 W/kg; SAR (8g) = 0.349 W/kg; SAR (10g) = 0.300 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 63.9 % Date: 2024-07-01 #04_WLAN5GHz_802.11n-HT40 MCS0_Front Face _0mm_Ch159 Communication System: IEEE 802.11n; Frequency: 5795.000 MHz Medium: HSL_5G_240701 Medium parameters used: f= 5795.000 MHz; σ= 5.25 S/m; ε r = 36.1 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(4.96, 4.83, 4.83); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (260.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.666 W/kg; SAR (10g) = 0.214 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.06 dB SAR (1g) = 0.609 W/kg; SAR (8g) = 0.220 W/kg; SAR (10g) = 0.192 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 60.8 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.06 dB SAR (1g) = 0.800 W/kg; SAR (8g) = 0.278 W/kg; SAR (10g) = 0.239 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 60.8 % Date: 2024-07-02 #05_WLAN6GHz_802.11ax-HE160 MCS0_Front Face_0mm_Ch143 Communication System: IEEE 802.11ax; Frequency: 6665.000 MHz Medium: HSL_6G_240702 Medium parameters used: f= 6665.000 MHz; σ= 6.24 S/m; ε r = 34.6 Ambient Temperature: 23.6°C; Liquid Temperature: 22.6°C DASY6 Configuration: - Probe: EX3DV4 - SN7700; ConvF(5.53, 5.28, 5.41); Calibrated: 2024-02-01 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1399; Calibrated: 2024-03-13 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10755-AAC Area Scan (255.0 mm x 85.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 0.910 W/kg; SAR (10g) = 0.252 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 mm Power Drift = 0.09 dB SAR (1g) = 0.320 W/kg; SAR (8g) = 0.108 W/kg; SAR (10g) = 0.094 W/kg Smallest distance from peaks to all points 3 dB below = 6.2 mm Ratio of SAR at M2 to SAR at M1 = 49.4 % psAPD (1.0cm2, sq) = 3.20 [W/m2]; psAPD (4.0cm2, sq) = 2.1…
Text truncated - open the document above for the full version.
Scans Setup Scan Type5G Scan Grid Extents [mm]280.0 x 120.0 Grid Steps [lambda]0.0625 x 0.0625 Sensor Surface [mm]2.0 Measurement Results Date2024-07-02 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 3.11 psPDtot+ [W/m 2 ] 4.22 H max [A/m]0.141 E max [V/m]55.0 max (Stot) [W/m 2 ] 6.28 Power Drift [dB]-0.01 IPDn7.73 Measurement Report for Device Device Under Test Properties Model, ManufacturerDimensions [mm]Software VersionDUT Type Device,386.0 x 238.0 x 40.03.2.0.1840Tablet Exposure Conditions Phantom SectionPosition, Test Distance [mm]Frequency [MHz]Conversion Factor 5GFront Face, 2.006665.01.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave - 1109Air -EUmmWV4 - SN9441_F1-55GHz, 2023-11-17DAE4 Sn656, 2024-01-18
SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D2450V2, serial no. 929 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 929 2450MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.21.2022 (Cal. Report) -25.5 52.9 4.7 11.20.2023 (extended) -25.9 1.57 52.3 -0.6 4.8 0.1 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2450 V2, serial no. 929 (Data of Measurement : 11.20.2023) 2450MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1006 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1006 5250MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -21.6 54.4 -7.5 05.24.2024 (extended) -19.7 -8.80 53.1 -1.3 -10.0 -2.5 5600MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.5 57.1 -7.3 05.24.2024 (extended) -22.9 11.71 55.0 -2.1 -6.0 1.3 5750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.8 59.1 4.1 05.24.2024 (extended) -21.2 1.92 59.6 0.5 0.5 -3.6 5850MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -31.4 52.7 0.8 05.24.2024 (extended) -27.7 -11.78 55.4 2.7 0.1 -0.7 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1006 (Data of Measurement : 05.24.2024) 5000MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1128 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1128 5200MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -21.9 48.7 -7.9 02.21.2024 (extended) -21.9 0 48.9 0.2 -7.3 0.6 5800MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -28.0 49.4 -3.9 02.21.2024 (extended) -23.8 -15 53.0 3.6 -4.5 -0.6 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1128 (Data of Measurement : 02.21.2024) 5000MHz - Head SPORT ON INTERNATIONA L I NC. TE L : 886-3-327-3456 FA X : 886 -3-328-497 8 CLA13, serial no. 1022 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> CLA13 – serial no. 1022 13MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 09.01.2022 (Cal. Report) -25.51848.364 4.9544 08.3 1.2023 (extended) -24.882 -2.4950.308 1.944 5.7239 0.7695 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - CLA13, serial no. 1022 (Data of Measurement : 08.31.2023) 13 MHz - Head
TEL : 886-3-327-3456 Page 1 of 36 FAX : 886-3-328-4978 Issued Date : Jul. 26, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA450111 FCC SAR TEST REPORT FCC ID : UZ7KC50A15 Equipment : KC50A15 Kiosk Computer Brand Name : Zebra Model Name : KC50A15 Applicant : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Manufacturer : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on May 24, 2024 and testing was started from May 29, 2024 and completed on Jul. 05, 2024. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 36 FAX : 886-3-328-4978 Issued Date : Jul. 26, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA450111 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 4. RF Exposure Limits....................................................................................................................................................... 6 4.1 Uncontrolled Environment ...................................................................................................................................... 6 4.2 Controlled Environment .......................................................................................................................................... 6 4.3 RF Exposure limit for above 6GHz ......................................................................................................................... 7 5. Specific Absorption Rate (SAR) ................................................................................................................................... 8 5.1 Introduction ............................................................................................................................................................ 8 5.2 SAR Definition ........................................................................................................................................................ 8 6. System Description and Setup .................................................................................................................................... 9 6.1 Test Site Location ................................................................................................................................................... 9 6.2 E-Field Probe ........................................................................................................................................................10 6.3 Data Acquisition Electronics (DAE) .......................................................................................................................10 6.4 Phantom ................................................................................................................................................................ 11 6.5 Device Holder........................................................................................................................................................12 7. Measurement Procedures ...........................................................................................................................................13 7.1 Spatial Peak SAR Evaluation ................................................................................................................................13 7.2 Power Reference Measurement.....................................................…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 4 | 15E | 5.75 GHz - 5.83 GHz | 240.40 mW |
Cordless Scanner
Equipment Class
DTS - Digital Transmission SystemCordless Scanner
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterTouch Computer
Equipment Class
CBE - Citizens Band End User DevicesTouch Computer
Equipment Class
NII - Unlicensed National Information Infrastructure TXTouch Computer
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter