UZ7KC50E22KC50E22 Kiosk Computer

Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Date: August 9, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Zebra Technologies Corporation Company US Address: 3 Overlook Point, Lincolnshire, IL, United States, 60069 Contact Person: Jay Cadiz Email: [email protected] Telephone number: 847-616-5806 or 224-532-6912 FRN: 0015642663 Sincerely yours, Signed by the Applicant Contact Signed by the Agent Contact Name: Dharmajit Solanki Name: Jay Cadiz Email: [email protected] Email: [email protected] TEL: 416-970-6612 TEL: 847-616-5806 or 224-532-6912

Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 1.416.970.6612 phone | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 15, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: UZ7KC50E22 [Zebra Technologies Corporation] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, __________________ Dharmajit Solanki [email protected]

Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 1.416.970.6612 phone | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 15, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: UZ7KC50E22 [Zebra Technologies Corporation] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, __________________ Dharmajit Solanki [email protected]

Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I l l i n o i s 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m Date: August 15, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7KC50E22 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  Internal Photos Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I l l i n o i s 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. _______________________ Dharmajit Solanki [email protected]

Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I l l i n o i s 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m Date: August 15, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7KC50E22 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  Internal Photos Regulatory Engineering Zebra Technologies Corporation 3 O v e r l o o k P o i n t, | L i n c o l n s h i r e , I l l i n o i s 6 0 0 6 9 | 1 . 4 1 6 . 9 7 0 . 6 6 1 2 p h o n e | w w w . z e b r a . c o m  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. _______________________ Dharmajit Solanki [email protected]

Labellocation Under the back cover of thedevice The label becomes visible to users when the back cover is removed to install the device.

Appendix EReport No.: FA470121 Page84/94 Appendix EReport No.: FA470121 Page85/94 Appendix EReport No.: FA470121 Page86/94 Appendix EReport No.: FA470121 Page87/94 Appendix EReport No.: FA470121 Page88/94 Appendix EReport No.: FA470121 Page89/94 Appendix EReport No.: FA470121 Page90/94 Appendix EReport No.: FA470121 Page91/94 Appendix EReport No.: FA470121 Page92/94 Appendix EReport No.: FA470121 Page93/94 Appendix EReport No.: FA470121 Page94/94

Appendix EReport No.: FA470121 Page56/94 Appendix EReport No.: FA470121 Page57/94 Appendix EReport No.: FA470121 Page58/94 Appendix EReport No.: FA470121 Page59/94 Appendix EReport No.: FA470121 Page60/94 Appendix EReport No.: FA470121 Page61/94 Appendix EReport No.: FA470121 Page62/94 Appendix EReport No.: FA470121 Page63/94 Appendix EReport No.: FA470121 Page64/94 Appendix EReport No.: FA470121 Page65/94 Appendix EReport No.: FA470121 Page66/94 Appendix EReport No.: FA470121 Page67/94 Appendix EReport No.: FA470121 Page68/94 Appendix EReport No.: FA470121 Page69/94 Appendix EReport No.: FA470121 Page70/94 Appendix EReport No.: FA470121 Page71/94 Appendix EReport No.: FA470121 Page72/94 Appendix EReport No.: FA470121 Page73/94 Appendix EReport No.: FA470121 Page74/94 Appendix EReport No.: FA470121 Page75/94 Appendix EReport No.: FA470121 Page76/94 Appendix EReport No.: FA470121 Page77/94 Appendix EReport No.: FA470121 Page78/94 Appendix EReport No.: FA470121 Page79/94 Appendix EReport No.: FA470121 Page80/94 Appendix EReport No.: FA470121 Page81/94 Appendix EReport No.: FA470121 Page82/94 Appendix EReport No.: FA470121 Page83/94

Appendix EReport No.: FA470121 Page45/94 Appendix EReport No.: FA470121 Page46/94 Appendix EReport No.: FA470121 Page47/94 Appendix EReport No.: FA470121 Page48/94 Appendix EReport No.: FA470121 Page49/94 Appendix EReport No.: FA470121 Page50/94 Appendix EReport No.: FA470121 Page51/94 Appendix EReport No.: FA470121 Page52/94 Appendix EReport No.: FA470121 Page53/94 Appendix EReport No.: FA470121 Page54/94 Appendix EReport No.: FA470121 Page55/94

Appendix EReport No.: FA470121 Page1/94 Appendix EReport No.: FA470121 Page2/94 Appendix EReport No.: FA470121 Page3/94 Appendix EReport No.: FA470121 Page4/94 Appendix EReport No.: FA470121 Page5/94 Appendix EReport No.: FA470121 Page6/94 Appendix EReport No.: FA470121 Page7/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D2450V2, serial no. 929 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 929 2450MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.21.2022 (Cal. Report) -25.5 52.9 4.7 11.20.2023 (extended) -25.9 1.57 52.3 -0.6 4.8 0.1 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix EReport No.: FA470121 Page8/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2450 V2, serial no. 929 (Data of Measurement : 11.20.2023) 2450MHz - Head Appendix EReport No.: FA470121 Page9/94 Appendix EReport No.: FA470121 Page10/94 Appendix EReport No.: FA470121 Page11/94 Appendix EReport No.: FA470121 Page12/94 Appendix EReport No.: FA470121 Page13/94 Appendix EReport No.: FA470121 Page14/94 Appendix EReport No.: FA470121 Page15/94 Appendix EReport No.: FA470121 Page16/94 Appendix EReport No.: FA470121 Page17/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1006 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1006 5250MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -21.6 54.4 -7.5 05.24.2024 (extended) -19.7 -8.80 53.1 -1.3 -10.0 -2.5 5600MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.5 57.1 -7.3 05.24.2024 (extended) -22.9 11.71 55.0 -2.1 -6.0 1.3 5750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.8 59.1 4.1 05.24.2024 (extended) -21.2 1.92 59.6 0.5 0.5 -3.6 5850MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -31.4 52.7 0.8 05.24.2024 (extended) -27.7 -11.78 55.4 2.7 0.1 -0.7 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix EReport No.: FA470121 Page18/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1006 (Data of Measurement : 05.24.2024) 5000MHz - Head Appendix EReport No.: FA470121 Page19/94 Appendix EReport No.: FA470121 Page20/94 Appendix EReport No.: FA470121 Page21/94 Appendix EReport No.: FA470121 Page22/94 Appendix EReport No.: FA470121 Page23/94 Appendix EReport No.: FA470121 Page24/94 Appendix EReport No.: FA470121 Page25/94 Appendix EReport No.: FA470121 Page26/94 Appendix EReport No.: FA470121 Page27/94 Appendix EReport No.: FA470121 Page28/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1128 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1128 5200MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -21.9 48.7 -7.9 02.21.2024 (extended) -21.9 0 48.9 0.2 -7.3 0.6 5800MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -28.0 49.4 -3.9 02.21.2024 (extended) -23.8 -15 53.0 3.6 -4.5 -0.6 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix EReport No.: FA470121 Page29/94 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1128 (Data of Measurement : 02.21.2024) 5000MHz - Head Appendix EReport No.: FA470121 Page30/94 Appendix EReport No.: FA470121 Page31/94 Appendix EReport No.: FA470121 Page32/94 Appendix EReport No.: FA470121 Page33/94 Appendix EReport No.: FA470121 Page34/94 Appendix EReport No.: FA470121 Page35/94 Appendix EReport No.: FA470121 Page36/94 Appendix EReport No.: FA470121 Page37/94 Appendix EReport No.: FA470121 Page38/94 Appendix EReport No.: FA470121 Page39/94 Appendix EReport No.: FA470121 Page40/94 Appendix EReport No.: FA470121 Page41/94 Appendix EReport No.: FA470121 Page42/94 Appendix EReport No.: FA470121 Page43/94 Appendix EReport No.: FA470121 Page44/94

Scans Setup Scan Type5G Scan Grid Extents [mm]120.0 x 360.0 Grid Steps [lambda]0.0625 x 0.0625 Sensor Surface [mm]2.0 Measurement Results Date2024-07-18 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 2.76 psPDtot+ [W/m 2 ] 3.18 H max [A/m]0.131 E max [V/m]46.4 max (Stot) [W/m 2 ] 4.35 Power Drift [dB]-0.13 IPDn6.82 Measurement Report for Device Device Under Test Properties Model, ManufacturerDimensions [mm]Software VersionDUT Type Device,320.0 x 510.0 x 43.03.2.0.1840Tablet Exposure Conditions Phantom SectionPosition, Test Distance [mm]Frequency [MHz]Conversion Factor 5GFRONT, 2.005985.01.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave - 1044Air -EUmmWV3 - SN9424_F1-55GHz, 2024-03-12DAE4 Sn1696, 2023-10-23 Appendix DReport No.: FA470121 Page1/1

Communication System: IEEE 802.11b WiFi 2.4 GHz; Frequency: 2412.000 MHz Medium: HSL_2450_240716 Medium parameters used: f= 2412.000 MHz; σ= 1.79 S/m; ε r = 38.9 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(7.39, 7.39, 7.39); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10415-AAA Area Scan (140.0 mm x 360.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.850 W/kg; SAR (10g) = 0.444 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = -0.06 dB SAR (1g) = 0.622 W/kg; SAR (8g) = 0.356 W/kg; SAR (10g) = 0.330 W/kg Smallest distance from peaks to all points 3 dB below = 12.0 mm Ratio of SAR at M2 to SAR at M1 = 80.6 % Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = -0.06 dB SAR (1g) = 0.896 W/kg; SAR (8g) = 0.503 W/kg; SAR (10g) = 0.464 W/kg Smallest distance from peaks to all points 3 dB below = 12.0 mm Ratio of SAR at M2 to SAR at M1 = 80.6 % Date: 2024-07-16 #01_WLAN2.4GHz_802.11b 1Mbps_Front Face_0mm_Ch1 Appendix CReport No.: FA470121 Page1/11 Appendix CReport No.: FA470121 Page2/11 Communication System: IEEE 802.11n; Frequency: 5270.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5270.000 MHz; σ= 4.64 S/m; ε r = 36.1 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(5.1, 5.1, 5.1); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (120.0 mm x 360.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.441 W/kg; SAR (10g) = 0.149 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.04 dB SAR (1g) = 0.241 W/kg; SAR (8g) = 0.103 W/kg; SAR (10g) = 0.092 W/kg Smallest distance from peaks to all points 3 dB below = 5.6 mm Ratio of SAR at M2 to SAR at M1 = 70.7 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.04 dB SAR (1g) = 0.462 W/kg; SAR (8g) = 0.184 W/kg; SAR (10g) = 0.163 W/kg Smallest distance from peaks to all points 3 dB below = 5.6 mm Ratio of SAR at M2 to SAR at M1 = 70.7 % Date: 2024-07-16 #02_WLAN5GHz_802.11n-HT40 MCS0_Front Face_0mm_Ch54 Appendix CReport No.: FA470121 Page3/11 Appendix CReport No.: FA470121 Page4/11 Communication System: IEEE 802.11n; Frequency: 5550.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5550.000 MHz; σ= 4.92 S/m; ε r = 35.8 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.3, 4.3, 4.3); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (100.0 mm x 380.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.533 W/kg; SAR (10g) = 0.192 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.12 dB SAR (1g) = 0.626 W/kg; SAR (8g) = 0.230 W/kg; SAR (10g) = 0.203 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 66.1 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.12 dB SAR (1g) = 0.458 W/kg; SAR (8g) = 0.178 W/kg; SAR (10g) = 0.158 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 66.1 % Date: 2024-07-16 #03_WLAN5GHz_802.11n-HT40 MCS0_Front Face_0mm_Ch110 Appendix CReport No.: FA470121 Page5/11 Appendix CReport No.: FA470121 Page6/11 Communication System: IEEE 802.11n; Frequency: 5755.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5755.000 MHz; σ= 5.11 S/m; ε r = 35.5 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.46, 4.46, 4.46); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (100.0 mm x 360.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.630 W/kg; SAR (10g) = 0.206 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.07 dB SAR (1g) = 0.597 W/kg; SAR (8g) = 0.215 W/kg; SAR (10g) = 0.189 W/kg Smallest distance from peaks to all points 3 dB below = 5.6 mm Ratio of SAR at M2 to SAR at M1 = 65.5 % Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.07 dB SAR (1g) = 0.713 W/kg; SAR (8g) = 0.258 W/kg; SAR (10g) = 0.225 W/kg Smallest distance from peaks to all points 3 dB below = 5.6 mm Ratio of SAR at M2 to SAR at M1 = 65.5 % Date: 2024-07-16 #04_WLAN5GHz_802.11n-HT40 MCS0_Front Face_0mm_Ch151 Appendix CReport No.: FA470121 Page7/11 Appendix CReport No.: FA470121 Page8/11 Communication System: IEEE 802.11ax; Frequency: 6785.000 MHz Medium: HSL_6G_240716 Medium parameters used: f= 6785.000 MHz; σ= 6.28 S/m; ε r = 34.3 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.85, 4.85, 4.85); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10731-AAC Area Scan (102.0 mm x 374.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 2.11 W/kg; SAR (10g) = 0.602 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 m…

Text truncated - open the document above for the full version.

Scans Setup Scan Type5G Scan Grid Extents [mm]120.0 x 120.0 Grid Steps [lambda]0.25 x 0.25 Sensor Surface [mm]10.0 Measurement Results Date 2024-07-18 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 61.4 psPDtot+ [W/m 2 ] 61.6 H max [A/m]0.436 E max [V/m]164 max (Stot) [W/m 2 ] 69.3 Power Drift [dB]0.10 IPDn112 Measurement Report for Device Device Under Test Properties Model, ManufacturerDimensions [mm]Software VersionDUT Type Device,70.0 x 50.0 x 8.03.2.0.18405G Verification Source Exposure Conditions Phantom SectionPosition, Test Distance [mm]Frequency [MHz]Conversion Factor 5GFront, 10.0010000.01.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave - 1044Air -EUmmWV3 - SN9424_F1-55GHz, 2024-03-12 DAE4 Sn1696, 2023-10-23 Appendix BReport No.: FA470121 Page1/1

Date: 2024-07-16 System Check_Head_2450MHz DUT: D2450V2 - SN929 Communication System: CW ; Frequency: 2450.000 MHz Medium: HSL_2450_240716 Medium parameters used: f= 2450.000 MHz; σ= 1.83 S/m; ε r = 38.7 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(7.39, 7.39, 7.39); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.34 W/kg; SAR (10g) = 1.12 W/kg; Pin=17.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = 0.05 dB SAR (1g) = 2.40 W/kg; SAR (8g) = 1.26 W/kg; SAR (10g) = 1.14 W/kg Smallest distance from peaks to all points 3 dB below = 9.0 mm Ratio of SAR at M2 to SAR at M1 = 80.7 % Appendix AReport No.: FA470121 Page1/5 Date: 2024-07-16 System Check_Head_5250MHz DUT: D5GHzV2 - SN1006 Communication System: CW ; Frequency: 5250.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5250.000 MHz; σ= 4.64 S/m; ε r = 36.2 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(5.1, 5.1, 5.1); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.31 W/kg; SAR (10g) = 0.940 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.08 dB SAR (1g) = 3.82 W/kg; SAR (8g) = 1.27 W/kg; SAR (10g) = 1.09 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 65.9 % Appendix AReport No.: FA470121 Page2/5 Date: 2024-07-16 System Check_Head_5600MHz DUT: D5GHzV2 - SN1006 Communication System: CW ; Frequency: 5600.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5600.000 MHz; σ= 4.97 S/m; ε r = 35.8 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.3, 4.3, 4.3); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.85 W/kg; SAR (10g) = 1.12 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.12 dB SAR (1g) = 4.24 W/kg; SAR (8g) = 1.40 W/kg; SAR (10g) = 1.21 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 64.2 % , 0 Appendix AReport No.: FA470121 Page3/5 Date: 2024-07-16 System Check_Head_5800MHz DUT: D5GHzV2 - SN1128 Communication System: CW ; Frequency: 5800.000 MHz Medium: HSL_5G_240716 Medium parameters used: f= 5800.000 MHz; σ= 5.30 S/m; ε r = 35.4 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.46, 4.46, 4.46); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=20.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 7.08 W/kg; SAR (10g) = 2.05 W/kg; Pin=20.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = -0.07 dB SAR (1g) = 7.71 W/kg; SAR (8g) = 2.55 W/kg; SAR (10g) = 2.19 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 61.3 % Appendix AReport No.: FA470121 Page4/5 Date: 2024-07-16 System Check_Head_6500MHz DUT: D6.5GHzV2 - SN1083 Communication System: CW ; Frequency: 6500.000 MHz Medium: HSL_6G_240716 Medium parameters used: f= 6500.000 MHz; σ= 6.00 S/m; ε r = 34.4 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.85, 4.85, 4.85); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V5.0 (20deg probe tilt); Serial: 1227; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=20.0dBm/Area Scan (51.0 mm x 85.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 24.9 W/kg; SAR (10g) = 4.69 W/kg; Pin=20.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 mm Power Drift = 0.07 dB SAR (1g) = 28.3 W/kg; SAR (8g) = 6.31 W/kg; SAR (10g) = 5.18 W/kg Smallest distance from peaks to all points 3 dB below = 4.6 mm Ratio of SAR at M2 to SAR at M1 = 51.4 % psAPD (1.0cm2, sq) = 283 [W/m2]; psAPD (4.0cm2, sq) = 126 [W/m2] Appendix AReport No.: FA470121 Page5/5

SP ORTON INTERNATIONAL INC. T EL : 886-3-327-3456 FAX : 886-3-328-4978 D2450V2, serial no. 736 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 736 2450M HZ Da te of Measurement Re turn-Loss (dB) De lta (%) Re al Impedance (ohm) De lta (ohm) I maginary Impedance (ohm) De lta (ohm) 08.17.2021 (C al. Report) -24.29755.295 3.6377 08.16.2022 (ex tended) -28.76118.37 51.401 -3.8943.556 -0.0817 08.15.2023 (ex tended) -28.48317.23 51.239 -4.0563.496 -0.1417 T he return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verific…

Text truncated - open the document above for the full version.