UZ7MC32N0Mobile Computer

MC32N0 SERIES REGULATORY GUIDE Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design. Motorola Solutions does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola Solutions products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola Solutions products. Warranty For the complete Motorola Solutions hardware product warranty statement, go to: http://www.motorolasolutions.com/warranty. Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Solutions Global Customer Support at: http:// www.motorolasolutions.com/support. For the latest version of this guide go to: http://www.motorolasolutiuons.com/ support. Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Solutions, Inc. All Rights Reserved. MN000216A01 Rev. A - February 2014 Regulatory Information This device is approved under Motorola Solutions, Inc. This guide applies to Model Number MC32N0. All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.motorolasolutions.com/support. Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void the user's authority to operate the equipment. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. Declared maximum operating temperature: 50°C. Radio Modules The device contains approved radio module. The module is identified below. • Motorola WLAN radio 802.11 a/b/g/n and BT Technology, Type: 21-148603. Bluetooth ® Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http:// www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http:// www.motorolasolutions.com/doc. Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz band) Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation - FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150 - 5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement: Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co- Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Health and Safety Recommendations Ergonomic Recommendations • Reduce or eliminate repetitive motion • Maintain a neutral posture • Reduce or eliminate excessive force • Keep objects that are used frequently within easy reach • Perform tasks at correct heights • Reduce or eliminate vibration • Reduce or eliminate direct pressure • Provide adjustable workstations • Provide adequate clearance • Provide a suitable working environment • Improve work procedures. Safety on the Road Do not take notes or use the device while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips: 1. Get to know your wireless device and any features s…

Text truncated - open the document above for the full version.

GMOTOROLASOLUTIONS RegulatoryEngineering Date:20 February2014 Address:OneMotorolaPlazaHoltsvilleNY11742-1300USA FederalCommunicationsCommission Officeof Engineeringand Technology EquipmentAuthorizationDivision 7345OaklandMillsRoad ColumbiaMD21046 Subject:Attestationsand Requestsfor FCCID: UZ7MC32NO To the Commission: The transmitterpoweris fixedat the factoryand in the firmware,thereare no controlsthat allowthe EndUserto adjustor changethe transmitterpowerbeyondwhatis listedon the FCCGrant,this includes2.4 GHz,channels12 and 13. Pursuantto Section0.459of the Commission'sRules,and Section552(b)(4)of the Freedomof InformationAct,MotorolaSolutionsherebyrequestsshorttermconfidentialtreatmentof information accompanyingthis Applicationfor EquipmentAuthorizationwithFCCID: UZ7MC32NOfor Exhibits as outlinedbelow: 1. InternalPhotographs 2. ExternalPhotographs 3. TestSetupPhotographs 4. User'sManual The abovematerialscontainimages,tradesecrets,and proprietaryinformationnot customarilyreleased to the publicpriorto offeringfor sale.Thepublicdisclosureofthesemattersmightbe harmfulto MotorolaSolutionsand provideunjustifiedbenefitsto its competitors. Pursuantto Sections0.457and 0.459of the Commission'sRules,the Applicantwe requestconfidential treatmentof informationaccompanyingthis applicationas outlinedbelow: EXHIBIT(1) OperationalDescription EXHIBIT(2) BlockDiagram EXHIBIT(3) SchematicDiagrams The abovematerialscontaintradesecretsand proprietaryinformationnot customarilyreleasedto the public.The publicdisclosureofthesemattersmightbe harmfulto the Applicantand provideunjustified benefitsto its competitors. The Applicantunderstandsthat pursuantto Rule0.457,disclosureof this Applicationand all accompanyingdocumentationwillnot be madebeforethe dateof the Grantfor this application. MotorolaSolutions,Inc. OneMotorolaPlaza,I Holtsville,NY11742I 1.631.738.2400phoneI 1.631.627.7179faxI www.motorolasolutions.com "MOTOROLASOLUTIONS RegulatoryEngineering We,the undersigned,attestthat this devicedoesnot supportaccess,by any party(EndUseror ProfessionalInstaller),to set the frequencyor disableDFS.Thereare no controlsor selectionsin the productfirmwarethat can tum off / disableDFS.The clientsoftwareand associateddriverswillnot initiateany transmissionon DFSfrequencieswithoutinitiationby a master. We,the undersigned,attestthat this devicedoesnot supportaccess,by any party(EndUseror ProfessionalInstaller)to makeadjustmentsto whichchannelssupportactiveor passivescanning, enablingor disablingchannelsto supportAd-Hocoperations.Thereare no controlsor selectionsin the productfirmwarethat can add or subtractsupportof thesefunctionson additionalchannels. ChannelPlan MotorolaSolutions,Inc. OneMotorolaPlaza,I Holtsville,NY11742I 1.631.738.2400phoneI 1.631.627.7179faxI www.motorolasolutions.com oMOTOROLASOLUTIONS RegulatoryEngineering 116 5580 ---- xx »> ------ 1185590 ---- x x .>: ----- 120 5600 1245620 1265630 Disabled 1285640 1325660 1345610 --- xx .>: .z=: 136 5680 --- xx »> ::=::==::==== 140 5100 --- xx -------- .z=: 1495145 x x »> t>: 'z:= 151 5155x x ----- »>.i-> 1535165 xx »>»>~ 1515185 x x »> »> ---- 1595195 xx »> »> ---- 161 5805xx .> »> ---- 1655825xx .>»-: ---- If you haveany questionsregardingthe authorization,pleasedon'thesitateto contactme. Respectfully, MarkLuksich DMTS,RegulatoryEngineering [email protected] 631-738-5134 MotorolaSolutions,Inc. OneMotorolaPlaza,I Holtsville,NY11742I 1.631.738.2400phoneI 1.631.627.7179faxI www.motorolasolutions.com

Regulatory Engineering Motorola Solutions, Inc. One Motorola Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.motorolasolutions.com Date: 6 February 2014 Address: One Motorola Plaza Holtsville NY 11742-1300 USA Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: FCC - Agent Authorization Letter To the Commission: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of the MC32N0 under FCC ID: UZ7MC32N0: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyua within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please don’t hesitate to contact me. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 [email protected]

Report No.: 131028E08 Page 1 CONSTRUCTION PHOTOS OF EUT Straight Report No.: 131028E08 Page 2 Straight (28 keys) Report No.: 131028E08 Page 3 Straight (38 keys) Report No.: 131028E08 Page 4 Straight (48 keys) Report No.: 131028E08 Page 5 Rotate Report No.: 131028E08 Page 6 Rotate (28 keys) Report No.: 131028E08 Page 7 Rotate (38 keys) Report No.: 131028E08 Page 8 Rotate (48 keys) Report No.: 131028E08 Page 9 Gun Report No.: 131028E08 Page 10 Gun (28 keys) Report No.: 131028E08 Page 11 Gun (38 keys) Report No.: 131028E08 Page 12 Gun (48 keys) Report No.: 131028E08 Page 13 Power adapter (P/N : PWRS-14000-249R) Report No.: 131028E08 Page 14 Report No.: 131028E08 Page 15 Report No.: 131028E08 Page 16

TITLE: Unless otherwise tolerence specified MODEL NO F 12 DESCRIPTION NO DATE E D SCALE: Universal Scientific Industrial Co.,Ltd. 3 APP BY DESIGNER ± 0.5 USI R DATE DATE 4 SHEET ED/SHED/MDE SOURCE ORGANIZATION DWG NO USI P/N UNIT: REV F E D C B A 1 2 C B 34 A 1 A3 mm 1/1 59-465760-01 Jeffl Qing 2B-045453 MC32N0 GUN MC32N0 Gun Main label A3 A2 A5 A4 A6 A7 A8 A9 1.M 2.P 3.M D 4. SI SH HINA SHC 01/08'14 5. USI KS CHINA KS 01/08'14 No 7. Modify regulatory logo 11/01'13 Modify AU logo & UL number 01/08'14

TITLE: Unless otherwise tolerence specified MODEL NO F 12 DESCRIPTION NO DATE E D SCALE: Universal Scientific Industrial Co.,Ltd. 3 APP BY DESIGNER ± 0.5 USI R DATE DATE 4 SHEET ED/SHED/MDE SOURCE ORGANIZATION DWG NO USI P/N UNIT: REV F E D C B A 12 C B 34 A 1 A3 mm 1/1 59-465758-01 Jeffl Qing 2B-045451 MC32N0 ROT MC32N0 ROT Main Label A3 A2 A5 A4 A6 A7 A8 A9 1.M 2.P 3.M D 4. SI SH HINA USHC 01/08'14 5. USI KS CHINA KS 01/08'14 7. 11/01'13Modify regulatory logo 01/08'14Modify AU logo & UL number

TITLE: Unless otherwise tolerence specified MODEL NO F 12 DESCRIPTIONNODATE E D SCALE: Universal Scientific Industrial Co.,Ltd. 3 APP BY DESIGNER ± 0.5 USI R DATE DATE 4 SHEET ED/SHED/MDE SOURCE ORGANIZATION DWG NO USI P/N UNIT: REV F E D C B A 12 C B 34 A 1 A3 mm 1/1 59-465759-01 Jeffl Qing 2B-045452 MC32N0 ROT MC32N0 STR Main Label A3 A2 A5 A4 A6 A7 A8 A9 1.M 2.P 3.M D 4. 01/08'14 5. I KS INA KS 01/08'14 A NC. 742 7 11/01'13 01/08'14 Modify regulatory logo Modify AU logo & UL number

MC32N0 Mobile Computer FCC ID: UZ7MC32N0

Report No.: 131028E08 Page 1 CONSTRUCTION PHOTOS OF EUT Straight Report No.: 131028E08 Page 2 Report No.: 131028E08 Page 3 Report No.: 131028E08 Page 4 Report No.: 131028E08 Page 5 Report No.: 131028E08 Page 6 Report No.: 131028E08 Page 7 Report No.: 131028E08 Page 8 Report No.: 131028E08 Page 9 Report No.: 131028E08 Page 10 Report No.: 131028E08 Page 11 Report No.: 131028E08 Page 12 Report No.: 131028E08 Page 13 Report No.: 131028E08 Page 14 Report No.: 131028E08 Page 15 Rotate Report No.: 131028E08 Page 16 Report No.: 131028E08 Page 17 Report No.: 131028E08 Page 18 Report No.: 131028E08 Page 19 Report No.: 131028E08 Page 20 Report No.: 131028E08 Page 21 Report No.: 131028E08 Page 22 Report No.: 131028E08 Page 23 Report No.: 131028E08 Page 24 Report No.: 131028E08 Page 25 Report No.: 131028E08 Page 26 Report No.: 131028E08 Page 27 Report No.: 131028E08 Page 28 Report No.: 131028E08 Page 29 Report No.: 131028E08 Page 30 Gun Report No.: 131028E08 Page 31 Report No.: 131028E08 Page 32 Report No.: 131028E08 Page 33 Report No.: 131028E08 Page 34 Report No.: 131028E08 Page 35 Report No.: 131028E08 Page 36 Report No.: 131028E08 Page 37 Report No.: 131028E08 Page 38 Report No.: 131028E08 Page 39 Report No.: 131028E08 Page 40 Report No.: 131028E08 Page 41 Report No.: 131028E08 Page 42 Report No.: 131028E08 Page 43

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 33 Report No. : SA131028E08 Issued Date : Jan. 16, 2014 Revision : R01 FCC SAR Test Report Report No. : SA131028E08 Applicant : Motorola Solutions, Inc. Address : One Motorola Plaza Holtsville NY 11742-1300 USA Product : Mobile Computer FCC ID : UZ7MC32N0 Brand : MOTOROLA Model No. : MC32N0 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r02 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r01 / KDB 648474 D04 v01r02 Sample Received Date : Oct. 28, 2013 Date of Testing : Jan. 09, 2014 ~ Jan. 14, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 33 Report No. : SA131028E08 Issued Date : Jan. 16, 2014 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 7 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 3.2 SPEAG DASY System ................................................................................................................................................. 7 3.2.1 Robot.................................................................................................................................................................. 8 3.2.2 Probes ................................................................................................................................................................ 9 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 9 3.2.4 Phantoms ......................................................................................................................................................... 10 3.2.5 Device Holder ................................................................................................................................................... 11 3.2.6 System Validation Dipoles ................................................................................................................................ 11 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 12 3.3 SAR System Verification ............................................................................................................................................ 15 3.4 SAR Measurement Procedure ................................................................................................................................... 16 3.4 .1 Area & Zoom Scan Procedure ......................................................................................................................... 16 3.4.2 Volume Scan Procedure................................................................................................................................... 16 3 .4.3 Power Drift Monitoring ...................................................................................................................................... 17 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 17 3.4.5 SAR Averaged Metho…

Text truncated - open the document above for the full version.

Report No.: RF131028E08-3 1 of 27 Report Format Version 5.2.0 DFS TEST REPORT (Android System) REPORT NO.: RF131028E08-3 MODEL NO.: MC32N0 FCC ID: UZ7MC32N0 RECEIVED: Oct. 28, 2013 TESTED: Jan. 02, 2014 ISSUED: Feb. 07, 2014 APPLICANT: Motorola Solutions, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF131028E08-3 2 of 27 Report Format Version 5.2.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. EUT INFORMATION ................................................................................................. 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ....................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ..................................... 6 2.4 EUT MAXIMUM CONDUCTED POWER .................................................................. 7 2.5 EUT MAXIMUM EIRP POWER ................................................................................ 7 2.6 TRANSMIT POWER CONTROL (TPC) .................................................................... 8 2.7 STATEMENT OF MAUNFACTURER ....................................................................... 8 3. U-NII DFS RULE REQUIREMENTS ........................................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................................ 10 4. TEST & SUPPORT EQUIPMENT LIST .................................................................. 13 4.1 TEST INSTRUMENTS ........................................................................................... 13 4.2 DESCRIPTION OF SUPPORT UNITS ................................................................... 13 5. TEST PROCEDURE .............................................................................................. 14 5.1 BVADT DFS MEASUREMENT SYSTEM: .............................................................. 14 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ................................ 15 5.3 DEVIATION FROM TEST STANDARD .................................................................. 16 5.4 CONDUCTED TEST SETUP CONFIGURATION ................................................... 16 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................................. 16 6. TEST RESULTS ..................................................................................................... 17 6.1 SUMMARY OF TEST RESULTS ............................................................................ 17 6.2 DETAILED TEST RESULTS ................................................................................... 18 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. .............................................................................................. 18 6.2.1.1 DFS DETECTION THRESHOLD ........................................................................... 18 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME.................. 19 6.2.1.3 NON- OCCUPANCY PERIOD ................................................................................ 20 6.2.1.4 NON-ASSOCIATED TEST ..................................................................................... 23 6.2.1.5 NON- CO-CHANNEL TEST .................................................................................... 23 7. INFORMATION ON THE TESTING LABORATORIES ........................................... 24 8. APPENDIX-A .......................................................................................................... 25 9. APPENDIX B - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ..................................................................................... 27 Report No.: RF131028E08-3 3 of 27 Report Format Version 5.2.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF131028E08-3 Original release Feb. 07, 2014 Report No.: RF131028E08-3 4 of 27 Report Format Version 5.2.0 1. CERTIFICATION PRODUCT: Mobile Computer BRAND NAME…

Text truncated - open the document above for the full version.

Report No.: RF131028E08-4 1 of 27 Report Format Version 5.2.0 DFS TEST REPORT (WinCE System) REPORT NO.: RF131028E08-4 MODEL NO.: MC32N0 FCC ID: UZ7MC32N0 RECEIVED: Oct. 28, 2013 TESTED: Jan. 02, 2014 ISSUED: Feb. 07, 2014 APPLICANT: Motorola Solutions, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF131028E08-4 2 of 27 Report Format Version 5.2.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. EUT INFORMATION ................................................................................................. 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ....................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ..................................... 6 2.4 EUT MAXIMUM CONDUCTED POWER .................................................................. 7 2.5 EUT MAXIMUM EIRP POWER ................................................................................ 7 2.6 TRANSMIT POWER CONTROL (TPC) .................................................................... 8 2.7 STATEMENT OF MAUNFACTURER ....................................................................... 8 3. U-NII DFS RULE REQUIREMENTS ........................................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................................ 10 4. TEST & SUPPORT EQUIPMENT LIST .................................................................. 13 4.1 TEST INSTRUMENTS ........................................................................................... 13 4.2 DESCRIPTION OF SUPPORT UNITS ................................................................... 13 5. TEST PROCEDURE ..........................................…

Text truncated - open the document above for the full version.