UZ7MPACTINDR4MPACT Tag

Bluetooth Smart Beacon MPACT ‘MN-002606-06EN Hardware Installation Guide i ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: http://www.zebra.com/linkoslegal COPYRIGHTS: http://www.zebra.com/copyright WARRANTY: http://www.zebra.com/warranty END USER LICENSE AGREEMENT: http://www.zebra.com/eula Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Apple iBeacon Use of the Works with Apple iBeacon badge means that a product has been designed and certified by the manufacturer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this product with iPod, iPhone, or iPad may affect wireless performance. ii Zebra Technologies Corporation ("Zebra") End-User Software License Agreement BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, ZEBRA IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT INSTALL OR USE THIS PRODUCT. Definitions Grant of License Zebra Technologies Corporation ("Zebra") grants you ("Licensee" or "you") a personal, nonexclusive, nontransferable, revocable, nonassignable, limited license to use the software and documentation ("Product(s)") subject to the terms and conditions of this Agreement. You shall use the Products only for your internal business purposes, exclusively to support Zebra devices. Any use of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of your License. In the event of a breach of this Agreement, Zebra will be entitled to all available remedies at law or in equity (including immediate termination of the license without notice, immediate injunctive relief and repossession of all Products unless Licensee is a Federal agency of the United States Government). You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of the Products to any other party without Zebra's prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be equipped with such a protection device. Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Zebra. All intellectual property developed, originated, or prepared by Zebra in connection with the Products remain vested exclusively in Zebra, and this Agreement does not grant to Licensee any intellectual property rights. Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording) except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. iii Limited Warranty Zebra warrants for a period of ninety (90) days from your receipt of the Products to you that the Software, under normal use, will perform substantially in accordance with Zebra's published specifications for that release level of the Software.…

Text truncated - open the document above for the full version.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corp. and/or its affiliates. All rights reserved. | www.zebra.com MN-004634-01EN MPACT-INDR4 Regulatory Guide Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: MPACT-INDR4 All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Tradução do idioma local / Übersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地語言翻譯 / 本地语言翻 译 / Yerel dil çeviri /Tłumaczenie na język lokalny : www.zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C Bluetooth ® Wireless Technology This is an approved Bluetooth ® product. For more information on the Bluetooth SIG listing, please visit www.bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: www.zebra.com/doc. Health and Safety Recommendations Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at www.zebra.com/responsibility. Marking and European Economic Area (EEA) Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc. Waste Electrical and Electronic Equipment (WEEE) For EU Customers: For products at the end of their life, please refer to recycling/disposal advice at: www.zebra.com/weee. United Kingdom Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity. The full text of the UK Declaration of Conformity is available at: www.zebra.com/doc United States and Canada Regulatory Radio Frequency Interference Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer d including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. MPACT-INDR4 Regulatory Guide 2 Radio Frequency Interference Requirements – Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3 ([B])/NMB-3([B]) This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Requirements - FCC and ISED The …

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 17, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (“the applicant”) certifies that, as of the date of the filing of the application, [Zebra Technologies Corporation] is our designated U.S. agent for service of process for the above referenced grantee code. Zebra Technologies Corporation accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. [Zebra Technologies Corporation] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced grantee code. Designated U.S. Agent Information: Name: Zebra Technologies Corporation FRN: 0015642663 Address: 1 Zebra Plaza, Holtsville, New York, United States, 11742 Contact Person: Larry (Qianlin) Zhou Tel.: 346-260-3543 Email: [email protected] Sincerely, Applicant U.S. Agent Zebra Technologies Corporation Zebra Technologies Corporation Larry (Qianlin) Zhou Larry (Qianlin) Zhou

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 17, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: UZ7MPACTINDR4 Zebra Technologies Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543 Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 17, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: UZ7MPACTINDR4 Zebra Technologies Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: January 16, 2023 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7MPACTINDR4 AUTHORIZATION LETTER We, the undersigned, hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 1 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 1. External Photograph of EUT Brand Name: ZEBRA / Model Name: MPACT-INDR4 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 2 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 3 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 4 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 5 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 6 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 7 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 2. Photograph of Accessory Brand Name: ZEBRA / Model Name: MPACT-INDR4 Specification of Accessory Battery Brand Name Panasonic Model Name CR2032 Remark: For accessories equipped with this EUT, please refer to the following photos. PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 8 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 720510 Battery

Label Location FCC ID: UZ7MPACTINDR4 IC: 109AN-MPACTINDR4 On the bottom of the EUT

MADE IN CHINA 5222 P/N: MPACT-MB1101-01-WR MODEL: MPACT-INDR4 CAN ICES-3 (B) /NMB-3 (B) FCC ID: UZ7MPACTINDR4 IC:109AN-MPACTINDR4 ZEBRA TECHNOLOGIES CORP. HOLTSVILLE, NY 11742 BNEW RELEASE SANDY CHEN WNC CONFIDENTIAL 4L.XRBD3.001 B 2 YOLANDA CHENG YOLANDA CHENG SANDY CHEN 09/13/22 09/13/22 09/13/22 09/13/22 LABEL,PRODUCT,ANATEL,MPACT-INDR4,V1,XRBD-3 1/1 1 OF 1 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Tel: 886-3-6667799 Fax: 886-3-5788726 DIE CUT TEST I TEMTEST SPECTEST CONDITIONCRITERIA 1 附著力測 試 ISO Class.: 1 ASTM Class.: 4 B ASTM D3359-02/ ISO 2409:2007 Det achment of smal l fl akes of the coat ing at the inter sections of the cuts. A cross-cut ar ea not signifi cantly greater than 5 % is affected. NOTES: 1. MATERIAL: WHITE PET( ) TYP50, t=0.05 FINISH: PET(LINTEC-PET25N NPL QPM), t=0.025 : NH 2. COLOR: , 3. UL Approved 4. TEST REQUIREMENT: *23.3 1.9 2.1 1.31.3 1.3 2.7 10.7 1.3 18.5 *33.2 *1 *2 3 4 5 6 7 8 9 10 11

PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 9 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 3. Internal Photograph of EUT Brand Name: ZEBRA / Model Name: MPACT-INDR4 720510 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 10 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 11 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 12 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 13 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 14 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 15 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 16 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP283129 TEL : 886-3-327-3456 Page Number : 17 of 17 FAX : 886-3-328-4978 Issue Date : Feb. 02, 2023 Report Version : 01 ─────THE END──── Bluetooth Antenna

SPORTON INTERNATIONAL INC. Page Number : 1 of 4 TEL : 886-3-327-3456 Report Issued Date : Feb. 01, 2023 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA283129 RF Exposure Evaluation Report FCC ID : UZ7MPACTINDR4 Equipment : MPACT Tag Brand Name : ZEBRA Model Name : MPACT-INDR4 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 USA Manufacturer : Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan,R.O.C. Standard : 47 CFR Part 2.1093 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part 2.1093 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager SPORTON INTERNATIONAL INC. Page Number : 2 of 4 TEL : 886-3-327-3456 Report Issued Date : Feb. 01, 2023 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA283129 Table of Contents 1. General Information ........................................................................................................................... 3 1.1 Description of Device Under Test (DUT) ........................................................................................... 3 2. Maximum RF output power among production units ......................................................................... 3 3. RF Exposure Evaluation .................................................................................................................... 4 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA283129 Rev. 01 Initial issue of report Feb. 01, 2023 SPORTON INTERNATIONAL INC. Page Number : 3 of 4 TEL : 886-3-327-3456 Report Issued Date : Feb. 01, 2023 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA283129 1. General Information 1.1 Description of Device Under Test (DUT) Product Feature & Specification DUT Type MPACT Tag Brand Name ZEBRA Model Name MPACT-INDR4 FCC ID UZ7MPACTINDR4 Wireless Technology and Frequency Range Bluetooth: 2402 MHz ~ 2480 MHz Mode Bluetooth LE Antenna Type PIFA Antenna HW Version Rev A SW Version 1.0.0.0-009R MFD 31OCT22 DUT Stage Production Unit 2. Maximum RF output power among production units Mode / Band Bluetooth BT4.0-LE (GFSK) 2.4GHz Bluetooth -0.30 SPORTON INTERNATIONAL INC. Page Number : 4 of 4 TEL : 886-3-327-3456 Report Issued Date : Feb. 01, 2023 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA283129 3. RF Exposure Evaluation Bluetooth Max Power (dBm) mW Separation Distance (mm) Frequency (GHz) Exclusion Thresholds -0.30 0.93 5 2.48 0.29 Note: 1. Per KDB 447498 D01v06 the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Conclusion: Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 0.29 which is <= 3, SAR testing is not required.

1 / 10 ■Normal □ Internal Use □ Confidential □ Restricted Confidential MPACT-MB1101-01-WR Antenna Specification Project Name: MPACT-MB1101-01-WR Author: Wistron NeWeb Corporation Revision: 1.0 Revision Date: 2022/10/24 2 / 10 ■Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines Revision History Rev. # Author Summary of Changes Date 1.0 Nick Initial release 2022/10/24 3 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines © Wistron NeWeb Corporation THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND IS THE EXCLUSIVE PROPERTY OF WNC AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN PERMISSION FROM WNC. LIMITATION OF LIABILITY THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PURELY FOR DESIGN REFERENCE AND SUBJECT TO REVISION BY WNC AT ANY TIME. NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY WARRANTY OR RIGHT TO USE THE MATERIAL CONTAINED HEREIN WITHOUT WNC’S PRIOR EXPRESS WRITTEN CONSENT. WNC SHALL NOT BE LIABLE FOR ANY USE, APPLICATION OR DEVELOPMENT DERIVED FROM THE MATERIAL WITHOUT SUCH PRIOR EXPRESS WRITTEN CONSENT. 4 / 10 ■Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines Contents Revision History .............................................................................................................. 2 Contents ......................................................................................................................... 4 1. MPACT-MB1101-01-WR antenna specification ........................................................ 5 2.Equipment list ........................................................................................................ 6 3.MVG SG64 Measurement System ............................................................................ 6 4.Test procedure ........................................................................................................ 7 5.Test Photographic ................................................................................................... 8 6.V.S.W.R Measurement ............................................................................................. 9 7.Efficiency ................................................................................................................ 9 8.Radiation Pattern .................................................................................................. 10 5 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines 1. MPACT-MB1101-01-WR antenna specification – Antenna Type • PIFA Antenna – Test environment • SATIMO Chamber SG64 – Test Procedure • OTA Passive Antenna measurement – VSWR • Under 2.7 for all of antennas – Radiation efficiency • ~69% of MPACT-MB1101-01-WR antenna – Peak gain • ~1dBi of MPACT-MB1101-01-WR antenna 6 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines 2. Equipment list 3. MVG SG64 Measurement System 7 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines 4. Test procedure 1. Open NPAC Spherical Measurement 2. Open SatEnv program 3. In SatEnv program open new file and save path file 4. Setup the test frequency 5. running test 6. Output near field measurement raw data into the SatEnv program 7. Use the program change the near field to far field data. 8. Final the data export to frequency、efficiency、gain、2D pattern、3D pattern、 row data..... 9 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines 6. V.S.W.R Measurement 7. Efficiency 10 / 10 ■ Normal □ Internal Use □ Confidential □ Restricted Confidential HW Design Guidelines 8. Radiation Pattern

TEL : 886-3-327-0868 Page Number : 1 of 27 FAX : 886-3-327-0855 Issue Date : Feb. 01, 2023 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR283129 FCC RADIO TEST REPORT FCC ID : UZ7MPACTINDR4 Equipment : MPACT Tag Brand Name : ZEBRA Model Name : MPACT-INDR4 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 USA Manufacturer : Wistron NeWeb Corporation 20 Park A…

Text truncated - open the document above for the full version.