UZ7PS30JPPersonal Shopper

Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: January 22, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Zebra Technologies Corporation certifies that the equipment FCC ID: UZ7PS30JP. FCC ID: UZ7PS30JB for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Zebra Technologies Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 17, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (“the applicant”) certifies that, as of the date of the filing of the application, [Zebra Technologies Corporation] is our designated U.S. agent for service of process for the above referenced grantee code. Zebra Technologies Corporation accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. [Zebra Technologies Corporation] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced grantee code. Designated U.S. Agent Information: Name: Zebra Technologies Corporation FRN: 0015642663 Address: 1 Zebra Plaza, Holtsville, New York, United States, 11742 Contact Person: Larry (Qianlin) Zhou Tel.: 346-260-3543 Email: [email protected] Sincerely, Applicant U.S. Agent Zebra Technologies Corporation Zebra Technologies Corporation Larry (Qianlin) Zhou Larry (Qianlin) Zhou

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: January 22, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7PS30JP. FCC ID: UZ7PS30JB AUTHORIZATION LETTER We, the undersigned, hereby authorize Jim Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jim Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

E532746 ZEBRA TECH CORP. HOLTSVILLE, NY 11742 MODEL: PS30JP S/N: XXXXXXXXXXXXXX Pats.: ip.zebra.com 5V 3A IC: 109AN-PS30JP FCC ID: UZ7PS30JP

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/6 System Check_Head_2450MHz DUT: D2450V2 - SN:1040 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.873 S/m; ε = 40.835; ρ = 1000 r 3 kg/m Ambient Temperature：23.1 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(8.03, 8.03, 8.03) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 3.09 W/kg Pin=50mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 40.13 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 4.71 W/kg SAR(1 g) = 2.49 W/kg; SAR(10 g) = 1.18 W/kg Maximum value of SAR (measured) = 3.08 W/kg 0 dB = 3.08 W/kg = 4.89 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/9 System Check_Head_5250MHz DUT: D5GHzV2 - SN:1113 Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5000 Medium parameters used: f = 5250 MHz; σ = 4.575 S/m; ε = 36.286; ρ = 1000 r 3 kg/m Ambient Temperature：23.2 °C; Liquid Temperature：22.9 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(5.73, 5.73, 5.73) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 9.77 W/kg Pin=50mW/Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 42.40 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 15.8 W/kg SAR(1 g) = 4.12 W/kg; SAR(10 g) = 1.19 W/kg Maximum value of SAR (measured) = 10.0 W/kg 0 dB = 10.0 W/kg = 10.00 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/12 System Check_Head_5600MHz DUT: D5GHzV2 - SN:1113 Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5000 Medium parameters used: f = 5600 MHz; σ = 4.952 S/m; ε = 35.732; ρ = 1000 r 3 kg/m Ambient Temperature：23.3 °C; Liquid Temperature：22.9 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(5.10, 5.10, 5.10) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 10.9 W/kg Pin=50mW/Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 43.42 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 18.2 W/kg SAR(1 g) = 4.31 W/kg; SAR(10 g) = 1.23 W/kg Maximum value of SAR (measured) = 11.0 W/kg 0 dB = 11.0 W/kg = 10.41 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 System Check_Head_5750MHz DUT: D5GHzV2 - SN:1113 Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5000 Medium parameters used: f = 5750 MHz; σ = 5.134 S/m; ε = 35.562; ρ = 1000 r 3 kg/m Ambient Temperature：23.2 °C; Liquid Temperature：22.7 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(5.32, 5.32, 5.32) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 10.2 W/kg Pin=50mW/Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 40.53 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 17.4 W/kg SAR(1 g) = 3.99 W/kg; SAR(10 g) = 1.14 W/kg Maximum value of SAR (measured) = 10.3 W/kg 0 dB = 10.3 W/kg = 10.13 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/6 01_WLAN2.4GHz_802.11b 1Mbps_Back_10mm_Ch11 Communication System: UID 0, WLAN2.4GHz (0); Frequency: 2462 MHz;Duty Cycle: 1:1 .018 Medium: HSL_2450 Medium parameters used: f = 2462 MHz; σ = 1.88 S/m; ε = 40.833; ρ = 1000 r 3 kg/m Ambient Temperature：23.1 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(8.03, 8.03, 8.03) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (91x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.878 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.86 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.578 W/kg; SAR(10 g) = 0.311 W/kg Maximum value of SAR (measured) = 0.867 W/kg 0 dB = 0.867 W/kg = -0.62 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/6 02_BlE_1Mbps_Back_10mm_Ch19 Communication System: UID 0, Bluetooth (0); Frequency: 2440 MHz;Duty Cycle: 1:1.616 Medium: HSL_2450 Medium parameters used: f = 2440 MHz; σ = 1.867 S/m; ε = 40.838; ρ = 1000 r 3 kg/m Ambient Temperature：23.1 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(8.03, 8.03, 8.03) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (101x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0700 W/kg Zoom Scan (9x10x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.3140 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.195 W/kg SAR(1 g) = 0.003 W/kg; SAR(10 g) = 0.000353 W/kg Maximum value of SAR (measured) = 0.195 W/kg 0 dB = 0.195 W/kg = -7.10 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/6 03_WLAN2.4GHz_802.11b 1Mbps_Front_0mm_Ch11 Communication System: UID 0, WLAN2.4GHz (0); Frequency: 2462 MHz;Duty Cycle: 1:1.018 Medium: HSL_2450 Medium parameters used: f = 2462 MHz; σ = 1.88 S/m; ε = 40.833; ρ = 1000 r 3 kg/m Ambient Temperature：23.1 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(8.03, 8.03, 8.03) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (91x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.645 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.79 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.750 W/kg SAR(1 g) = 0.444 W/kg; SAR(10 g) = 0.249 W/kg Maximum value of SAR (measured) = 0.634 W/kg 0 dB = 0.634 W/kg = -1.98 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/6 04_BlE_1Mbps_Front_0mm_Ch19 Communication System: UID 0, Bluetooth (0); Frequency: 2440 MHz;Duty Cycle: 1:1.616 Medium: HSL_2450 Medium parameters used: f = 2440 MHz; σ = 1.867 S/m; ε = 40.838; ρ = 1000 r 3 kg/m Ambient Temperature：23.1 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(8.03, 8.03, 8.03) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (101x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.121 W/kg Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.307 W/kg SAR(1 g) = 0.003 W/kg; SAR(10 g) = 0.000661 W/kg Maximum value of SAR (measured) = 0.172 W/kg 0 dB = 0.172 W/kg = -7.64 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/9 05_WLAN5GHz_802.11n-HT40 MCS0_Front_0mm_Ch54 Communication System: UID 0, WLAN5GHz (0); Frequency: 5270 MHz;Duty Cycle: 1:1.003 Medium: HSL_5000 Medium parameters used: f = 5270 MHz; σ = 4.61 S/m; ε = 36.279; ρ = 1000 r 3 kg/m Ambient Temperature：23.2 °C; Liquid Temperature：22.9 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(5.73, 5.73, 5.73) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2023/6/7 - Phantom: SAM Twin Phantom; Type: SAM Twin; Serial: TP-1697 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (51x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.304 W/kg Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 1.927 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.472 W/kg SAR(1 g) = 0.149 W/kg; SAR(10 g) = 0.069 W/kg Maximum value of SAR (measured) = 0.303 W/kg 0 dB = 0.303 W/kg = -5.19 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/12 06_WLAN5GHz_802.11ac-VHT80 MCS0_Front_0mm_Ch106 Communication System: UID 0, WLAN5GHz (0); Frequency: 5530 MHz;Duty Cycle: 1:1.005 Medium: HSL_5000 Medium parameters used: f = 5530 MHz; σ = 4.864 S/m; ε = 35.836; ρ = 1000 r 3 kg/m Ambient Temperature：23.3 °C; Liquid Temperature：22.9 °C DASY5 Configuration: - Probe: EX3DV4 - SN7764; ConvF(5.10, 5.10, 5.10) ; Calibrated: 2023/10/5 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrate…

Text truncated - open the document above for the full version.

D5GHzV2, Serial No. 1113 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D5GHzV2 – serial no. 1113 5250 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022/9/23 -23.942 49.021 -6.2252 2023/9/22 -26.63 11.23 46.533 2.488 -4.0285 -2.1967 D5GHzV2 – serial no. 1113 5600 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022/9/23 -25.273 55.212 -2.3941 2023/9/22 -23.746 -6.04 57.759 -2.547 1.4943 -3.8884 D5GHzV2 – serial no. 1113 5750 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022/9/23 -27.750 54.124 -1.0959 2023/9/22 -31.350 12.97 50.097 4.027 -3.1053 2.0094 <Justification of the extended calibration> The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D5GHzV2, serial no. 1113 5250MHz&5600MHz&5750MHz – Head – 2023.9.22

Sporton International Inc. (Kunshan) TEL : +86-512-57900158 Issued Date : Feb. 19, 2024 FCC ID : UZ7PS30JP Page 1 of 33 Form version. : 200414 FCC SAR Test Report Report No. : FA3D0816 FCC SAR Test Report APPLICANT : Zebra Technologies Corporation EQUIPMENT : Personal Shopper BRAND NAME : ZEBRA MODEL NAME : PS30JP FCC ID : UZ7PS30JP STANDARD : FCC 47 CFR PART 2 (2.1093) We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) TEL : +86-512-57900158 Issued Date : Feb. 19, 2024 FCC ID : UZ7PS30JP Page 2 of 33 Form version. : 200414 FCC SAR Test Report Report No. : FA3D0816 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information................................................................................................................................................ 6 5. RF Exposure Limits ....................................................................................................................................................... 7 5.1 Uncontrolled Environment ...................................................................................................................................... 7 5.2 Controlled Environment .......................................................................................................................................... 7 6. Specific Absorption Rate (SAR) ................................................................................................................................... 8 6.1 Introduction ............................................................................................................................................................ 8 6.2 SAR Definition ........................................................................................................................................................ 8 7. System Description and Setup ..................................................................................................................................... 9 7.1 E-Field Probe ....................................................................................................................................................... 10 7.2 Data Acquisition Electronics (DAE) ...................................................................................................................... 10 7.3 Phantom ................................................................................................................................................................ 11 7.4 Device Holder ....................................................................................................................................................... 12 8. Measurement Procedures ........................................................................................................................................... 13 8.1 Spatial Peak SAR Evaluation ............................................................................................................................... 13 8.2 Power Reference Measurement ........................................................................................................................... 14 8.3 Area Scan ............................................................................................................................................................. 14 8.4 Zoom Scan ........................................................................................................................................................... 15 8.5 Volume Scan Procedures ..................................................................................................................................... 15 8.6 Power Drift Monitoring .......................................................................................................................................... 15 9. Test Equipment List .................................................................................................................................................... 16 10. System Verification ................................................................................................................................................... 17 10.1 Tissue Simulating Liquids ................................................................................................................................... 17 10.2 Tissue Verification .............................................................................................................................................. 17 10.3 System Performance Check Results .................................................................................................................. 18 11. RF Exposure Positions ......................…

Text truncated - open the document above for the full version.

TEL: 886-3-327-0868 Page Number : 1 of 29 FAX: 886-3-327-0855 Issue Date : Feb. 19, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3D0512A FCC RADIO TEST REPORT FCC ID : UZ7PS30JP Equipment : Personal Shopper Brand Name : ZEBRA Model Name : PS30JP Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : FCC Part 15 Subpart C §15.247 The product was received on Dec. 22, 2023 and testing was performed from Dec. 29, 2023 to Jan. 28, 2024. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL: 886-3-327-0868 Page Number : 2 of 29 FAX: 886-3-327-0855 Issue Date : Feb. 19, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3D0512A Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Product Specification of Equipment Under Test ................................................................................ 6 1.3 Modification of EUT ........................................................................................................................... 6 1.4 Testing Location ................................................................................................................................ 7 1.5 Applicable Standards ......................................................................................................................... 7 2 Test Configuration of Equipment Under Test ......................................................................................... 8 2.1 Carrier Frequency Channel ............................................................................................................... 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 11 2.5 EUT Operation Test Setup .............................................................................................................. 11 2.6 Measurement Results Explanation Example ................................................................................... 12 3 Test Result ................................................................................................................................................ 13 3.1 Number of Channel Measurement .................................................................................................. 13 3.2 Hopping Channel Separation Measurement ................................................................................... 14 3.3 Dwell Time Measurement ................................................................................................................ 15 3.4 20dB and 99% Bandwidth Measurement ........................................................................................ 16 3.5 Output Power Measurement ............................................................................................................ 17 3.6 Conducted Band Edges Measurement............................................................................................ 18 3.7 Conducted Spurious Emission Measurement ................................................................................. 19 3.8 Radiated Band Edges and Spurious Emission Measurement ........................................................ 20 3.9 AC Conducted Emission Measurement........................................................................................... 24 3.10 Antenna Requirements .................................................................................................................... 26 4 List of Measuring Equipment ................................................................................................................. 27 5 Measurement Uncertainty ....................................................................................................................... 29 Appendix A. Conducted Test Results Appendix B. AC Conducted Emission Test Result Appendix C. Radiated Spurious Emission Appendix D. Radiated Spurious Emission Plots Appendix E. Duty Cycle Plots Appendix F. Setup Photographs TEL: 886-3-327-0868 Page Number : 3 of 29 FAX: 886-3-327-0855 Issue Date : Feb. 19, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3D0512A History of this test report Report No. Version Description Issue Date FR3D0512A 01 Initial issue of report Feb. 19, 2024 TEL: 886-3-327-0868 Page Number : 4 of 29 FAX: 886-3-327-0855 Iss…

Text truncated - open the document above for the full version.

TEL: 886-3-327-0868 Page Number : 1 of 17 FAX: 886-3-327-0855 Issue Date : Feb. 20, 2024 Report Template No.: BU5-FR15EWL AC MA Version 2.4 Report Version : 02 FCC CO-LOCATION RADIO TEST REPORT Report No. : FR3D0512G FCC CO-LOCATION RADIO TEST REPORT FCC ID : UZ7PS30JP Equipment : Personal Shopper Brand Name : ZEBRA Model Name : PS30JP Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : FCC Part 15 Subpart C §15.247 FCC Part 15 Subpart E §15.407 The product was received on Jan. 18, 2024 and testing was performed from Jan. 31, 2024 to Feb. 02, 2024. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test pr…

Text truncated - open the document above for the full version.