UZ7RE40RFID Module

RE40 Development Kit Quick Start Guide 2RE40 RFID Module Warranty For the complete Zebra hardware product warranty statement, go to: www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Support at: www.zebra.com/support. Software Support Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Zebra device shipped with the latest release of entitled software, go to: www.zebra.com/support. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Zebra at: [email protected]. You must include the following essential device information with your request: • Model number • Serial number • Proof of purchase • Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Zebra web site to download the appropriate software. Related Information The following documents and software provide more information about the RFID reader: • RE40 RFID Module Integration Guide • Carrier Board Integration Guide • DKRE User Guide • RFID Demo Application User Guide • API Programmer’s Guide For the latest version of this guide and all guides, go to: www.zebra.com/support. Quick Start Guide3 Introduction The RE40 Development Kit Radio Engine (DKRE) Quick Start Guide describes how to start reading UHF RFID tags with the Zebra RE40 RFID Module Kit and 123RFID Desktop software tool in minutes. For more information, refer to the RE40 DKRE User Guide. Development Kit Contents • RE40 Development Board • 5V Power Supply • Development Kit Quick Start Guide • 3 Antennas: Medium Gain (US), Medium Gain (EU), Low Gain (Universal) • RF Cable: SMA to SMA • 2 Micro USB Cables •USB Power (6 ft) •USB Data (4.5 ft) • RFID Tag Samples Kit Connecting the DKRE To configure the RE40 Development Kit: 1.Restore the default configuration if the connectors were reconfigured since opening the kit. Antenna SMA RF Cable Micro USB Data Cable Micro USB Power Cable 4RE40 RFID Module 2.Connect the development board to your Windows PC using the micro USB data cable. 3.Connect the 5V power supply to a power source and to the development board using the micro USB power cable. 4.Observe the LED on the DKRE to indicate that the module is powered on. 5.Based on the country of operation, select a US (902-928 MHz, p/n S9025PR), EU (865-870 MHz, p/n S8655PL), or universal antenna (860-960 MHz, p/n 9000984-XLPDNB) provided in the DKRE kit. 6.Connect the appropriate antenna to one of the SMA antenna connectors (J201 or J204) using the SMA RF Cable. USB UART USB Power DC 5V Power USB Data Quick Start Guide5 Installing 123RFID Software To install 123RFID Desktop software onto your PC: 1.Copy the 123RFID Desktop file from the USB drive provided or download the software: www.zebra.com/support. 2.Open the 123RFID Desktop software by double-clicking on the 123RFID Desktop icon on your desktop. Region Configuration For initial use only, you must configure the region of operation. 1.After selecting Find Readers for the first time (see Connecting to 123RFID), click Connect. The Reader Failed to Connect window displays to indicate that the region must be configured. 2.Select Continue. The RE Module Admin Login window displays. 3.Enter a Username and Password of your choosing. 4.Select Login. 5.Click on the Region of Operation drop-down menu and select your region of operation. 6.Click on the Communication Standard drop-down menu and select the standard for your region if applicable. 6RE40 RFID Module 7.Click on the I understand implications of setting an illegal region checkbox. 8.Select Set. 9.A successful update message window displays. Select OK. Connecting to 123RFID To Locate a reader on the local subnet or USB port using Reader Discovery: 1.Select the Find Readers button on the Welcome screen NOTE: For initial use only, the region must be configured before connecting to the reader, see Region Configuration for instructions. 2.Once Reader Discovery is complete, readers display under Available Readers. Quick Start Guide7 3.Select Connect next to the desired reader to connect. Once connected, the reader displays under Connected Readers. Reading Tags Once the device is connected, begin reading RFID tags as follows: 1.Select the Read tab to display the Data View screen. 2.Place the tags within a few inches of the read field view of the antenna. 3.Select Start to begin reading tags. For latest software, antenna specifications, and related product information, visit www.zebra.com/support. 8RE40 RFID Module Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to Model Number RE40. All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user's authority to operate the equipment. Declared maximum operating temperature: 60°C. Health and Safety Recommendations Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent em- ployee injury. • Reduce or eliminate repetitive motion • Maintain a natural position • Reduce or eliminate excessive force • Keep objects that are used frequently within easy reach • Perform tasks at correct heights • Reduce or eliminate vibration • Reduce or eliminate direct pressure •…

Text truncated - open the document above for the full version.

28 Appendix A: Regulatory for Third Part y Int egr ation Third P arty Integration Overview The RE40 is approved for modular certification by FCC and Industry Canada under the following ID numbers: FCC ID - UZ7RE40 IC ID - 109AN-RE40 Modular approval allows installation in different end-use products by an OEM with limited or no additional testing or equipment authorization for the transmitter function provided by the RE40: • No additional transmitter compliance testing is required if the module is operated with an approved antenna. • No additional transmitter compliance testing is required if the module is operated with the same general type of antenna listed as approved in the RE40 documentation. • Acceptable antennas must be of equal or less far field gain than the antenna previously authorized under the same FCC ID and must have similar in band and out of band characteristics. The end-product must comply with all applicable FCC equipment authorizations, regulations, requirements and equipment functions not associated with the RE40. • Compliance must be demonstrated to regulations for other transmitter components within the host product, to requirements for unintentional radiators (Part 15B), and to additional authorization requirements for the non-transmitter functions. The OEM applying the RE40 is required to include all FCC and/or IC statements and warnings detailed in the following sections to the end-product labeling and in the finished product manual. Product Labeling A statement must be included on the exterior of the final OEM product which communicates that the device identified by the FCC and Industry Canada ID numbers are contained within the product. Include the statements: • Contains FCC ID: UZ7RE40 • Contains IC: 109AN-RE40 Additionally, the OEM must include the following statements on the exterior of the finished product: • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. 29 Appendix A: Regulatory for Third Party Integration User Manual s Any user documentation that accompanies the end-product must include the following information in a location that is easily read: • To comply with EU RF radiation exposure requirements, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20 cm is maintained between the reader (antenna) & user's/nearby people's body at all times and must not be co-located or operating in conjunction with another antenna or transmitter. • To comply with FCC/ISED's RF radiation exposure requirements, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 25 cm is maintained between the reader (antenna) & user's/nearby people's body at all times and must not be co- located or operating in conjunction with another antenna or transmitter. US Requirements The finished product manual must contain the following statement: • WARNING: The Federal Communications Commission warns that changes or modifications of the radio module within this device not expressly approved by Zebra Technologies, Inc. could void the user's authority to operate the equipment. In the case where an OEM seeks class B (residential) limits for the host product, the finished product manual must contain the following statement: • Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g uarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. In the case where an OEM seeks the lesser category of a Class A digital device for their finished product, the following statement must be included in the manual of the finished product: • Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communicat ions. Operation of this equipment in a residential area is lik ely to cause harmful interference in which case the user will be required to correct the interference at his expense. Appendix A: Regulatory for Third Party Integration 30 Canadian Requirements The OEM must include the following regulatory statements in both the English and the French product manual and/or on the finished product: • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause un…

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: June 23, 2020 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7RE40 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Justification of Professional Installation Pursuant to the KDB 353028 D01, section II, A, 2), c), iii), we hereby justify that our product requires to be professional installed. 1. Why the hardware is not readily available to average consumer? Answer: Zebra RE40 is marketed to enterprise and not sold to average consumer. 2. Does device cannot be sold via retail to the general public or by mail order; it must be sold to authorized dealers or installers only? Answer: Yes. Zebra RE40 must be sold to authorized dealers or enterprise customers. 3. Is this device generally for industrial/commercial use? Answer: Yes. 4. Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer? Answer: Zebra RE40 must be installed at specific industrial/commercial location that cannot be accessed to general public therefore professional installation is required. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Date: July 16, 2020 Request for Modular Approval for FCC ID: UZ7RE40 Item Requirements EUT 1. The modular transmitter must have its own RF shielding. The module is equipped with its own shielding case. 2. The modular transmitter must have buffered modulation / data inputs. The module has buffer modulation / data inputs. 3. The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s). The module is tested with patch and loop antennas, with the highest antenna gain 6 dBi. The connector type is not unique and the professional installation information will be provided in an attestation and user manual. 5. The modular transmitter must be tested in a stand-alone configuration. The module was tested on evaluation board, and it’s not inside of another device during testing 6. The modular transmitter must be labeled with its own FCC ID number. The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The modular transmitter must comply with any applicable RF exposure requirement. The module complies with the FCC RF exposure requirements for fixed and mobile applications. RF exposure is addressed in the RF exposure exhibit. Regulatory Engineering Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 1 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 1.External Photograph of EUT Sample 1 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 2 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 3 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 4 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 5 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 6 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 7 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 Sample 2 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 8 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 9 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 10 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 11 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 12 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 13 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 Specification of Accessory AC Adapter Brand Name Zebra Part Number PWR-WUA5V12W0WW Micro USB Cable (power supply) Brand Name USI Part Number 54-286614-01 Micro USB Cable (data transmission) Brand Name USI Part Number 54-286510-01 Development Kit Radio Engine Brand Name Zebra Model Name DKRE-4000-00WW Antenna 1 Model Name AN480 Antenna 2 Model Name P1046176-01/ P1092482-01/ P1113980-01 Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 14 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 15 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 AC Adapter PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 16 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 Development Kit Radio Engine PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 17 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 18 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 US Plug PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 19 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01

Front of the device Label location

Carrier and DKRE Module

PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 20 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 720510 3.Internal Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 21 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 22 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 23 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 Antenna 1 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 24 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 25 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 Antenna 2 PHOTOGRAPHS OF EUT Report No.: EP051819 Brand Name: Zebra / Model Name: RE40 TEL : 886-3-327-3456 Page Number : 26 of 26 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 5 FAX : 886-3-328-4978 Issued Date : Jul. 15, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA051819 RF EXPOSURE EVALUATION REPORT FCC ID : UZ7RE40 Equipment : RFID Module Brand Name : Zebra Model Name : RE40 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part 2.1091 and it complies with applicable limit. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 5 FAX : 886-3-328-4978 Issued Date : Jul. 15, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA051819 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 4 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 5 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 5 4.1. Standalone Power Density Calculation ............................................................................................. 5 TEL : 886-3-327-3456 Page : 3 of 5 FAX : 886-3-328-4978 Issued Date : Jul. 15, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA051819 History of this test report Report No. Version Description Issued Date FA051819 Rev. 01 Initial issue of report Jul. 15, 2020 TEL : 886-3-327-3456 Page : 4 of 5 FAX : 886-3-328-4978 Issued Date : Jul. 15, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA051819 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type RFID Module Brand Name Zebra Model Name RE40 FCC ID UZ7RE40 Wireless Technology and Frequency Range RFID : 902.75 MHz ~ 927.25 MHz Mode RFID:ASK HW Version DV FW Version CAAFBS00-001-N12D0 (3.0.10.0) MFD 6-May-20 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Reviewed by: Jason Wang Report Producer: Wan Liu 2. Maximum RF average output power among production units Mode Maximum Average Power (dBm) RFID 27 TEL : 886-3-327-3456 Page : 5 of 5 FAX : 886-3-328-4978 Issued Date : Jul. 15, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA051819 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 25 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 25cm (mW/cm^2) Limit (mW/cm^2) RFID 6.00 27.00 33.000 1.995 1995.262 0.254 0.602 Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

TEL : 886-3-327-3456 Page Number : 1 of 40 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Template No.: BU5-FR15CUHF Version 2.1 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR051819 FCC RADIO TEST REPORT FCC ID : UZ7RE40 Equipment : RFID Module Brand Name : Zebra Model Name : RE40 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : FCC Part 15 Subpart C §15.247 The product was received on May 28, 2020 and testing was started from May 26, 2020 and completed on Jul. 04, 2020. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 40 FAX : 886-3-328-4978 Issued Date : Jul. 15. 2020 Report Template No.: BU5-FR15CUHF Version 2.1 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR051819 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Product Specification of Equipment Under Test ................................................................................ 6 1.3 Modification of EUT ......................................................................................…

Text truncated - open the document above for the full version.