UZ7TC520LTouch Computer

TC52y/TC52y-HC Touch Computer MN-004161-01EN Rev. A Quick Reference Guide 2 ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: zebra.com/linkoslegal COPYRIGHTS: zebra.com/copyright WARRANTY: zebra.com/warranty END USER LICENSE AGREEMENT: zebra.com/eula Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Publication Date March 12, 2021 3 Features CAUTION: The 8-pin interface connector at the bottom of the device is not removable. Trying to remove the connector will cause damage to the device and can void warranty. Figure 1 Front View NumberItemFunction 15 MP Front CameraTakes photos and videos. 2ReceiverUse for audio playback in Handset mode. 3Data Capture LEDIndicates data capture status. 4MicrophoneUse for communications in Speakerphone mode. 5Proximity SensorDetermines proximity for turning off display when in handset mode. 6Light SensorDetermines ambient light for controlling display backlight intensity. 7Charging/Notification LEDIndicates battery charging status while charging and application generated notifications. 8Touch ScreenDisplays all information needed to operate the device. 9SpeakerProvides audio output for video and music playback. Provides audio in speakerphone mode. 10Interface ConnectorProvides USB host and client communications, audio and device charging via cables and accessories. 8 13 12 11 10 9 7 6 5 3 2 4 1 4 Figure 2 TC52y Rear View 11MicrophoneUse for communications in Handset mode. 12Scan ButtonInitiates data capture (programmable). 13Programmable ButtonProgrammable button for use with applications. NumberItemFunction 1Battery> 15.48 Watt hours (typical) / > 4,150 mAh PowerPrecision+ Lithium-ion battery. 2Basic Hand Strap MountProvides mounting point for Basic Hand Strap accessory. 3Scan ButtonInitiates data capture (programmable). 4Battery Release LatchesPress to remove the battery. 5Volume Up/Down ButtonIncrease and decrease audio volume (programmable). 613 MP Rear CameraTakes photos and videos. 7Camera FlashProvides illumination for the camera. 8Power ButtonTurns the display on and off. Press and hold to reset the device, power off or swap battery. 9MicrophoneUse for noise cancellation. 10Exit WindowProvides data capture using the imager. 11NFC AntennaProvides communication with other NFC-enabled devices. 12Headset JackFor audio output to headset. 13Trigger Handle MountProvides electrical contacts and mounting for the Trigger Handle. NumberItemFunction 13 3 5 6 1 8 12 3 4 7 10 9 11 2 5 Figure 3 TC52y-HC Rear View Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use. CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. 1.Lift the access door. NumberItemFunction 1Battery> 15.48 Watt hours (typical) / > 4,150 mAh PowerPrecision+ Lithium-ion battery. 2NFC AntennaProvides communication with other NFC-enabled devices. 3Scan ButtonInitiates data capture (programmable). 4Battery Release LatchesPress to remove the battery. 5Volume Up/Down ButtonIncrease and decrease audio volume (programmable). 613 MP Rear CameraTakes photos and videos. 7Camera FlashProvides illumination for the camera. 8Power ButtonTurns the display on and off. Press and hold to reset the device, power off or swap battery. 9MicrophoneUse for noise cancellation. 10Exit WindowProvides data capture using the imager. 11Red Alert ButtonProgrammable button for use with applications. 11 3 5 6 1 8 3 4 7 10 9 2 6 2. Slide the microSD card holder to the unlock position. 3.Lift the microSD card holder. 4.Insert the microSD card into the card holder door ensuring that t…

Text truncated - open the document above for the full version.

TC520L Regulatory Guide MN-004146-01EN-P May 5, 2021 ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2020 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: TC520L All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Tradução do idioma local / Übersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地 語言翻譯 / 本地语言翻译 / Yerel dil çeviri /Tłumaczenie na język lokalny : zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source. Bluetooth ® Wireless Technology This is an approved Bluetooth ® product. For more information on the Bluetooth SIG listing, please visit www.bluetooth.com. 不在中国之外销售服务和使用 Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions: Go to Settings > Regulatory. Health and Safety Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer about any equipment that has been added to your vehicle. Position the device within easy reach. User should be able to access the device without removing their eyes from the road. IMPORTANT: Before installing or using, check national and local laws regarding distracted driving. Safety on the Road Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the areas where you drive. The wireless industry reminds you to use your device / phone safely when driving. Restricted Use Locations Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in restricted use locations. Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. Medical Devices RF Exposure Guidelines Safety Information Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. Handheld or Body-Worn Devices To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 1.5 cm or more from a user's body and nearby persons. Limb-worn Devices To satisfy RF exposure requirements, this device must be hand-use, only and, where applicable use only with Zebra tested and approved accessories. Laser Devices Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. Figure 1 Laser Warning Label – Class 1 Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified in the supplied product documentation may result in hazardous laser light exposure. Scanner Labeling Labels read as follows - needs translation into additional languages. Labels read: •Laser Light — do not stare into beam Class 2 Laser product. 630-680mm, 1mW •Caution — Class 3R laser light when open. Avoid direct eye exposure. •Complies wi…

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: May 5, 2021 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC520L AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC520L is located in the battery room. The label is visible to the users as they purchase the product and install the battery. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: May 5, 2021 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC520L AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC520L is located in the battery room. The label is visible to the users as they purchase the product and install the battery. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: May 5, 2021 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC520L AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC520L is located in the battery room. The label is visible to the users as they purchase the product and install the battery. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 1 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 1. External Photograph of EUT Brand Name: Zebra / Model Name: TC520L PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 2 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 3 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 4 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 5 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 6 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 7 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 2. Photograph of Accessory Brand Name: Zebra / Model Name: TC520L Specification of Accessory AC Adapter Brand Name Zebra Part Number PWR-WUA5V12W0US Battery 1 Brand Name Zebra Part Number BT-000314-01 Battery 2 Brand Name Zebra Part Number BT-000314-50 Rugged Charge/ USB cable Brand Name Zebra Part Number CBL-TC51-USB1-01 Headset Jumper 1 Brand Name Zebra Part Number CBL-TC51-HDST25-01 Headset Jumper 2 Brand Name Zebra Part Number CBL-TC51-HDST35-01 2.5mm Earphone Brand Name Zebra Part Number HDST-25MM-PTVP-01 3.5mm Earphone Brand Name Zebra Part Number HDST-35MM-PTVP-01 Exoskeleton Brand Name Zebra Part Number SG-TC51-EX01-01 Trigger Handle Brand Name Zebra Part Number TRG-TC51-SNP1-01 Soft Holster Brand Name Zebra Part Number SG-TC51-HLSTR1-01 Hand strap Brand Name Zebra Part Number SG-TC51-BHDSTP1-03 USB-C Adaptor Brand Name Zebra Part Number ADPTR-TC56-USBC-01 USB Type C cable Brand Name Zebra Part Number N/A Remark: For accessories equipped with this EUT, please refer to the following photos. PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 8 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 AC Adapter PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 9 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 10 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 11 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Battery 1 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 12 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 13 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 14 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Battery 2 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 15 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 16 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 17 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Rugged Charge/USB cable PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 18 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 19 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Headset Jumper 1 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 20 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 21 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Headset Jumper 2 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 22 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 23 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 2.5mm Earphone

PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 24 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 25 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 3.5mm Earphone PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 26 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 27 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Exoskeleton PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 28 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 29 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Trigger Handle PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 30 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 31 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Soft Holster PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 32 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 33 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 Hand strap PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 34 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 35 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 USB-C Adaptor PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 36 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 37 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 38 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01  PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 39 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 USB Type C cable PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 40 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01

1. MATERIAL: WHITE POLYESTER (T=0.075mm) +0.02mm (+可打印霧P.P.) 2. ADHESIVE: 壓花永久膠 3. PRINTING COLOR: LETTERS-------------- BLACK BACKGROUND------ WHITE TEXT-------------------- BLACK 4. LABEL DIMENSION TOLERANCE: +0mm / -0.2mm 5. THE MATERIAL MUST BE APPROVED BY ZEBRA & UL Sammi Cheng 4/06/2021 Vince Chen 4/06/2021 A MODEL NO.: PART NAME: A/W NO.: SCALE: UNIT : SHEET OF DRAWN:REVIEWED: APPROVED: REVDESCRIPTIONSIGN DATE 1 : 1 1 1 1 : 1 mm 1 1 Wistron Corporation Aslan_STD 1ZA.XXXXXX.XXXX TC520L_NA Cut Line 19.00 mm Zebra logo Size Minimum required: 19.00 mm wide or more Do not scale unproportional Do not modify or change logo layout. Keep same format 9mm 6.156mm 13.834mm 7.06mm 4.52mm 11.455mm keep distance do not get closer Zebra Logo Color:Black 6.15mm 7.01 mm 2.845 mm 7.855 mm 40.16±0.15mm 45.56±0.15mm 55.17±0.15mm 23.69±0.15mm 39.06±0.15mm 2.6 ±0.15mm 16.11 ±0.15mm WKS Printed Made in China (中國製造) WIH Printed Made in Taiwan(台灣制造 WMY Printed Made in Malaysia (馬來西亞制造) Factory ID Code: WKS B1 – KS WKS B6 – KS2 WKS C2 – KS3 WIH – M2 WMY – WM Printed by Wistron’s Factory Font: Arial 4.5pt ZEBRA TECHNOLOGIES CORP. HOLTSVILLE, NY 11742 FCC ID: UZ7TC520L IC: 109AN-TC520L US: XXXXXXXXXXX 5V 2.5A Factory ID:XXX Made in Xxxxx (XX製造) MODEL: TC520L MFD:DDMMMYY Rev:X P/N: XXXXXXXXXXXXXX (S) S/N: XXXXXXXXXXXXXX WIFI MAC ID: XXXXXXXXXXXX BT MAC ID: XXXXXXXXXXXX

PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 41 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 3. Internal Photograph of EUT Brand Name: Zebra / Model Name: TC520L 720510 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 42 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 43 of 83 FAX : 886-3-328-4978 Issued Date : May 28, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP122002 TEL : 886-3-327-3456 Page Number : 44 of 83 FAX : 886-3-328-4978 Issued …

Text truncated - open the document above for the full version.