UZ7TC5301Touch Computer

TC53 Touch Computer Quick Start Guide MN-004397-01EN Rev A Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2022 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: zebra.com/linkoslegal. COPYRIGHTS: zebra.com/copyright. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Features Features This section lists the features of the TC53 touch computer. Figure 1 Front and Side Views 1 2 3 4 5 6 7 8 9 10 3 Features NumberItemDescription 1Front camera 8MPTakes photos and videos. 2Scan LEDIndicates data capture status. 3Receiver PortUse for audio playback in Handset mode. 4Proximity/light sensor Determines proximity and ambient light for controlling display backlight intensity. 5Status LEDIndicates battery charging status while charging and application generated notifications. 6, 9Scan buttonInitiates data capture (programmable). 7Volume up/down button Increase and decrease audio volume (programmable). 86 in. LCD touch screen Displays all information needed to operate the device. 10PTT buttonTypically used for PTT communications. Where regulatory restrictions exist 1 , button is configurable for use with other applications. Note 1: Pakistan, Qatar Table 1 TC53 Front View 4 Features Figure 2 Back, Top, and Bottom View 1 2 3 4 5 6 7 11 8 9 10 12 13 NumberItemDescription 1Power buttonTurns the display on and off. Press and hold to reset the device, power off or swap battery. 2, 5, 9MicrophoneUse for noise cancellation. 3Headset jackFor audio output to headset (TC53 only). 4Back common 8 pins Provides host communications, audio and device charging via cables and accessories. 6Battery release latches Press to remove the battery. 7BatteryProvides power to the device. 8Speaker portsProvides audio output for video and music playback. Provides audio in speakerphone mode. Table 2 TC53 Rear View 5 Features NumberItemDescription 10Common IO USB Type C and 2 charge pins Provides power to the device using IO USB-C interface with 2 charge pins. 11Hand strap attachment points Attachment points for the hand strap. 12ToF moduleEmploys time of flight techniques to resolve distance between the camera and subject. 1316 MP rear camera with flash Takes photos and videos with flash to provide illumination for the camera. Table 2 TC53 Rear View (Continued) 6 Installing a microSD Card Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use. CAUTION—ESD: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded. 1.Lift the access door. 7 Installing a microSD Card 2.Slide the microSD card holder to the Open position. 3.Lift the microSD card holder door. 8 Installing a microSD Card 4.Insert the microSD card into the card holder ensuring that the card slides into the holding tabs on each side of the door. 9 Installing a microSD Card 5.Close the microSD card holder door. 6.Slide the microSD card holder door to the Lock position. NOTE: Access door must be replaced and securely seated to ensure proper device sealing. 10 Installing a microSD Card 7.Re-install the access door. 11 Installing the Battery Installing the Battery This section describes how to install the battery into the device. NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be effected. DO NOT put any labels, asset tags, en…

Text truncated - open the document above for the full version.

TC5301 Regulatory Guide MN-004401-01EN-P February 19, 2022 ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2022 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com/support Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: TC5301 All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Tradução do idioma local / Übersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地 語言翻譯 / 本地语言翻译 / Yerel dil çeviri /Tłumaczenie na język lokalny: zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source. Bluetooth ® Wireless Technology This is an approved Bluetooth ® product. For more information on the Bluetooth SIG listing, please visit bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions: Go to Settings > Regulatory. Health and Safety Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer about any equipment that has been added to your vehicle. Position the device within easy reach. User should be able to access the device without removing their eyes from the road. IMPORTANT: Before installing or using, check national and local laws regarding distracted driving. Safety on the Road Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the areas where you drive. The wireless industry reminds you to use your device / phone safely when driving. Restricted Use Locations Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in restricted use locations. Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. Handheld or Body-Worn Devices To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 1.5 cm or more from a user's body and nearby persons. To satisfy RF exposure requirements, this device must be hand-use only and, where applicable, use only with Zebra tested and approved accessories. Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified in the supplied product documentation may result in hazardous laser light exposure. SE5500 •Wavelength: 500-570 nm •Maximum Output: 1 mW •Pulse Duration: 4 ms •Beam Divergence: 18° •Repetition Rate: 16.7ms Scanner Labeling Labels read: •Laser Light — do not stare into beam Class 2 Laser product. 500-570mm, 1mW •Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 56, DATED May 08, 2019 and IEC/EN 60825-1:2014. LED Devices Classified as ‘EXEMPT RISK GROUP’ according to IEC…

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Z ebr a P la za, | H olt sv il l e, NY 117 4 2 | 1.631 .7 38 .24 0 0 pho ne | 1 .6 31 .62 7 .7 17 9 fax | ww w.zeb ra. co m Date: March 2, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC5301 Device Protocol Attestation We, Zebra Technologies Corporation, attest that this device under FCC ID: UZ7TC5301 complies with device protocol requirements and operational restrictions: for Dual Client 6CD. a. The product does not support 6PP category and the maximum power does not exceed authorized values. b. This device will only associate and connect with a low-power indoor Access Point, subordinate device, or standard access point and never directly link to any other client devices c. This device will always initiate transmission under the control of a low power indoor AP or subordinate device or standard Power Access Point except for brief communications before joining a network. These brief messages will only occur if the client has detected a low Power Indoor AP, subordinate, or standard access point operating on a channel. These messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. d. this device, when associated and connected with a low-power indoor access point, subordinate or standard access point device, will operate at a power lower as advertised by the indoor access point, subordinate, or standard access point: i. lower than or equal to the power advertised by the low-power indoor access point or subordinate and never above the maximum output power allowed by the FCC grant for clients associated with indoor clients or subordinate devices. ii. 6dB below than the Standard Power Access Point’s authorized power level and never above the maximum output power allowed by the FCC grant for clients associated with Standard Power Access Points. e. We acknowledging this device is subject to and in full compliance with the device restrictions list below.  prohibited for control of or communications with unmanned aircraft systems, including drones. Regulatory Engineering Zebra Technologies Corporation 1 Z ebr a P la za, | H olt sv il l e, NY 117 4 2 | 1.631 .7 38 .24 0 0 pho ne | 1 .6 31 .62 7 .7 17 9 fax | ww w.zeb ra. co m Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Date: March 21, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC5301 We, the undersigned, hereby declare FCC ID: UZ7TC5301, original granted on 03/17/2022) The software change filed under this application is: Enable WLAN U-NII-5, U-NII-6, U-NII-7, and U-NII-8 operation via embedded software. Except listing above, the hardware remains identical to the original authorization. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Date: February 8, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC5301 AUTHORIZATION LETTER We, the undersigned, hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC5301 is located in the battery room. The label is visible to the users as they purchase the product and install the battery. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121-1714 www.qualcomm.com 13 April 2022 To Whom It May Concern: We declare the Qualcomm WCN6856 chip for WIFI6E client implementation will be under control Low-power indoor access point and Standard power Access Point, the UUT can adjust a transmitter’s output power based on access point categories which to connected. This function is auto controlled by software QCM6490.LA.1.0. Further, we declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Thank you for your attention. Best Regards Stanley Lin/Wireless Regulatory, Staff Qualcomm Technologies Inc.

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Date: April 13, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC5301 Declaration Letter We, Zebra Technologies Corporation, attest that this device under FCC ID: UZ7TC5301 contains Qualcomm WCN6856 chip for WIFI6E client implementation. Qualcomm has declared the dual client device power adjustment will be solely controlled by software QCM6490.LA.1.0. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 1 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 1. External Photograph of EUT Brand Name: Zebra / Model Name: TC5301 Sample 1 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 2 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 3 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 4 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 5 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 6 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 7 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 Sample 2 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 8 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 9 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 10 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 11 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 12 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 13 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 Sample 3 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 14 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 15 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 16 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 17 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 18 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 19 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 2. Photograph of Accessory Brand Name: Zebra / Model Name: TC5301 Specification of Accessory Adapter Brand Name Zebra Part Number PWR-WUA5V12W0US Battery 1X Brand Name Zebra Part Number BT-000442-0020 USB TYPE A to TYPE C cable Brand Name Zebra Part Number CBL-TC5X-USBC2A-01 3.5mm Earphone Brand Name Zebra Part Number HDST-35MM-PTVP-01 Headset Jumper Brand Name Zebra Part Number CBL-TC51-HDST35-01 Trigger Handle Brand Name Zebra Part Number TRG-NGTC5-ELEC-01 Soft Holster Brand Name Zebra Part Number SG-NGTC5TC7-HLSTR-01 TC53/TC58 RUGGED BOOT Brand Name Zebra Part Number SG-NGTC5EXO1-01 Remark: For accessories equipped with this EUT, please refer to the following photos. PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 20 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 21 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 Adapter PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 22 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 720510 Battery 1X

Sim Door Spec. label Back Side / battery recess Laser

PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 23 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 3. Internal Photograph of EUT Brand Name: Zebra / Model Name: TC5301 720510 Sample 1 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 24 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 25 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 26 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 27 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 28 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 29 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 30 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 31 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 32 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 33 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 34 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 35 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 36 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 37 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 38 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 39 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 40 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 41 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 42 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 43 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01

PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 44 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 45 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 46 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 47 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 48 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 49 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 50 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 51 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 52 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 53 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 54 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 55 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 56 of 172 FAX : 886-3-328-4978 Issued Date : Mar. 02, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP1D2108 TEL : 886-3-327-3456 Page Number : 57 of 172 FAX : 886-3-328-4978 Issued Date : …

Text truncated - open the document above for the full version.