UZ7TC58B1Touch Computer

TC58 Touch Computer MN-004399-01EN Rev A Quick Start Guide Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2022 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: zebra.com/linkoslegal. COPYRIGHTS: zebra.com/copyright. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. TC58 Touch Computer Quick Start Guide Features This section lists the features of the TC58 touch computer. Figure 1 Front and Side Views 1 2 3 4 5 6 7 8 9 10 NumberItemDescription 1Front camera 8MPTakes photos and videos. 2Scan LEDIndicates data capture status. 3ReceiverUse for audio playback in Handset mode. 4Proximity/light sensor Determines proximity and ambient light for controlling display backlight intensity. Table 1 TC58 Front View 3 TC58 Touch Computer Quick Start Guide NumberItemDescription 5Battery status LEDIndicates battery charging status while charging and application generated notifications. 6, 9Scan buttonInitiates data capture (programmable). 7Volume up/down button Increase and decrease audio volume (programmable). 86 in. LCD touch screen Displays all information needed to operate the device. 10PTT buttonTypically used for PTT communications. Where regulatory restrictions exist 1 , button is configurable for use with other applications. 1 Pakistan, Qatar Table 1 TC58 Front View (Continued) Figure 2 Back, Top, and Bottom View 4 TC58 Touch Computer Quick Start Guide NumberItemDescription 1Power buttonTurns the display on and off. Press and hold to reset the device, power off or swap battery. 2, 5, 10 MicrophoneUse for noise cancellation. 3Headset jackFor audio output to headset (TC53 only). 4Back common I/ O 8 pins Provides host communications, audio and device charging via cables and accessories. 6Battery release latches Press to remove the battery. 7BatteryProvides power to the device. 8SpeakerProvides audio output for video and music playback. Provides audio in speakerphone mode. 9DC input pinsPower/ground for charging (5V through 9V). 11USB Type C and 2 charge pins Provides power to the device using I/O USB-C interface with 2 charge pins. 12Hand strap attachment points Attachment points for the hand strap. 13ToF moduleEmploys time of flight techniques to resolve distance between the camera and subject (premium configurations only). 1416 MP rear camera with flash Takes photos and videos with flash to provide illumination for the camera. Table 2 TC58 Rear View Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use. CAUTION—ESD: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded. 5 TC58 Touch Computer Quick Start Guide 1.Lift the access door. 2.Slide the microSD card holder to the Open position. 3.Lift the microSD card holder door. 6 TC58 Touch Computer Quick Start Guide 4.Insert the microSD card into the card holder ensuring that the card slides into the holding tabs on each side of the door. 5.Close the microSD card holder door. 7 TC58 Touch Computer Quick Start Guide 6.Slide the microSD card holder door to the Lock position. NOTE: Access door must be replaced and securely seated to ensure proper device sealing. 7.Re-install the access door. Installing the SIM Card CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded. 8 TC58 Touch Computer Quick Start Guide 1.Remove the access cover. 2.Slide the SIM card holder to the unlock position. 3.Lift the SIM card holder door. 9 TC58 Tou…

Text truncated - open the document above for the full version.

TC58 Touch Computer Regulatory Guide MN-004403-01EN-P May 17, 2022 ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2022 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com/support Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model numbers: TC58A1, TC58B1, TC58C1, TC58J1 All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / (BG) Превод на местен език / (CZ) Překlad do místního jazyka / (DE) Übersetzung in die Landessprache / (EL) Μετάφραση τοπικής γλώσσας / (ES) Traducción de idiomas locales / (FI) Paikallinen käännös / (FR) Traduction en langue locale / (HR) Prijevod na lokalni jezik / (HU) Helyi nyelvű fordítás / (IT) Traduzione in lingua locale / (JA) 現地語翻訳 / (PL) Tłumaczenie na język lokalny / (PT) Tradução do idioma local / (RO) Traducere în limba locală / (RU) Перевод на местный язык / (SK) Preklad do miestneho jazyka / (SR) Превод на локални језик / (TR) Yerel dil çevirisi / (ZH-CN) 当地语言翻译 / (ZH-TW) 當地語言翻譯 : zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source. Bluetooth ® Wireless Technology This is an approved Bluetooth ® product. For more information on the Bluetooth SIG listing, please visit bluetooth.com. 不在中国之外销售服务和使用 Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions: Go to Settings > Regulatory. Health and Safety Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer about any equipment that has been added to your vehicle. Position the device within easy reach. User should be able to access the device without removing their eyes from the road. IMPORTANT: Before installing or using, check national and local laws regarding distracted driving. Safety on the Road Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the areas where you drive. The wireless industry reminds you to use your device / phone safely when driving. Restricted Use Locations Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in restricted use locations. Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. Medical Devices It is recommended that a minimum separation distance of 20 cm (8 inches) be maintained between a wireless device and a medical devices such as pacemakers, defibrillator, or other implantable devices to avoid potential interference with the medical device. Pacemaker users should keep the device at the opposite side of the pacemaker or turn OFF the device if suspected of interference. Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. Handheld or Body-Worn Devices To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 1.5 cm or more from a user's body and nearby persons. To satisfy RF exposure requirements, this device must be hand-use only and, where applica…

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Date: June 1, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC58B1 AUTHORIZATION LETTER We, the undersigned, hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Declaration Letter We attest that this device under FCC ID: UZ7TC58B1 contains Qualcomm WCN6856 chip for WIFI6E client implementation. Qualcomm has declared the dual client device power adjustment will be solely controlled by software QCM6490.LA.1.0. And this is a dual client device and the RF power has been certified under 24dBm EIRP. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Date: June 1, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC58B1 AUTHORIZATION LETTER We, the undersigned, hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a, | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Declaration Letter We attest that this device under FCC ID: UZ7TC58B1 contains Qualcomm WCN6856 chip for WIFI6E client implementation. Qualcomm has declared the dual client device power adjustment will be solely controlled by software QCM6490.LA.1.0. And this is a dual client device and the RF power has been certified under 24dBm EIRP. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 1 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 1. External Photograph of EUT Brand Name: Zebra / Model Name: TC58B1 Sample 1 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 2 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 3 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 4 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 5 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 6 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 7 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 Sample 2 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 8 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 9 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 10 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 11 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 12 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 13 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 Sample 3 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 14 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 15 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 16 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 17 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 18 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 19 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 2. Photograph of Accessory Brand Name: Zebra / Model Name: TC58B1 Specification of Accessories Adapter Brand Name Zebra Part Number PWR-WUA5V12W0US Battery 1X Brand Name Zebra Part Number BT-000442-0020 Battery 1.5X Brand Name Zebra Part Number BT-000442-0820 USB TYPE A to TYPE C cable Brand Name Zebra Part Number CBL-TC5X-USBC2A-01 USB TYPE C to 3.5mm audio connector Brand Name Zebra Part Number ADP-USBC-35MM1-01 3.5mm Earphone Brand Name Zebra Part Number HDST-35MM-PTVP-01 USB TYPE C Earphone Brand Name Zebra Part Number HPST-USBC-PTT1-01 Headset Jumper Brand Name Zebra Part Number CBL-TC51-HDST35-01 Trigger Handle Brand Name Zebra Part Number TRG-NGTC5-ELEC-01 Soft Holster Brand Name Zebra Part Number SG-NGTC5TC7-HLSTR-01 TC53/TC58 RUGGED BOOT Brand Name Zebra Part Number SG-NGTC5EXO1-01 Remark: For accessories equipped with this EUT, please refer to the following photos. PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 20 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 21 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 Adapter PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 22 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 Battery 1 (1X) PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 23 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 720510 Battery 2 (1.5X)

1 FCC E-Label Information A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC number Yes No FCC logo Yes Yes 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Images of the e-label screen are provided below: 2 B. Access to the required information on the e-label 1. Users must be able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > Regulatory No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 2. Instructions must be provided with the product at the time of purchase, in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. Alternatively, a product-related website is permitted, if a reference (URL) to obtain the website information is provided at the time of purchase in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. The information to the user is provided in the user manual. 3. Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. Access to regulatory information must be provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access. The devices do not require special code, accessories or supplemental plug-ins to access the information. 4. The FCC ID, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification. Yes, it is clearly legible without the aid of magnification. 5. Both regulatory information and dedicated exclusive application(s) or script(s) must be secured and implemented in a factory- set-unalterable format. The regulatory information must be capable of being retrieved and displayed locally, and under the control of the end user in possession of the product. The method must be secure, such that the application or script ensures that the regulatory information correctly displayed. Yes, it is secured and the user cannot modify it. 3 C. Labeling for Importation and Purchasing 6. When e-labeling is used, a physical temporary label is also required on the product, or a label on the packaging, at the time of importation, marketing, and sales.8 The physical label can be a summary version of the required regulatory information, such that the product can be identified as complying with the FCC’s equipment authorization requirements. The information may simply be the FCC ID for products subject to certification. 7. Products imported that are already packaged for sale and have a physical temporary label will satisfy this requirement. However, for products imported in bulk and not packaged individually, it is acceptable to use a temporary removable adhesive label on the product, or temporary or permanent labels on the shipping packaging or protective bags. Any removable adhesive label shall be of a type intended to survive normal shipping and handling. The FCC logo, FCC ID, and model number are present on the product packaging.

PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 24 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 3. Internal Photograph of EUT Brand Name: Zebra / Model Name: TC58B1 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 25 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 Sample 1 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 26 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 27 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 28 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 29 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 30 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 31 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 32 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 33 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 34 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 35 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 36 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 37 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 38 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 39 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 40 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 41 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 42 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 43 of 198 FAX : 886-3-328-4978 Issued Date : May 23, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP222201 TEL : 886-3-327-3456 Page Number : 44 of 198 FAX …

Text truncated - open the document above for the full version.