UZ7TC58BETouch Computer

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Date: April 12, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Zebra Technologies Corporation Company US Address: 1 Zebra Plaza, Holtsville, New York, United States, 11742 Contact Person: Larry (Qianlin) Zhou Email: [email protected] Telephone number: 346-260-3543 FRN: 0015642663 Sincerely yours, Signed by the Applicant Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 9, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: UZ7TC58BE Zebra Technologies Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543 Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 9, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: UZ7TC58BE Zebra Technologies Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: April 9, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC58BE AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC58BE is located in the battery room. The label is visible to the users as they purchase the product and install the SIM card. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: April 9, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC58BE AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC58BE is located in the battery room. The label is visible to the users as they purchase the product and install the SIM card. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: April 9, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC58BE AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com  Internal Photos  External Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC58BE is located in the battery room. The label is visible to the users as they purchase the product and install the SIM card. If you have any questions regarding this authorization, please contact me directly. Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

1 E-Label Information A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes No FCC logo Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Images of the e-label screen are provided below: 2 B. Access to the required information on the e-label 1. Users must be able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu. The actual steps are: To access the e-label information, in the device, Choose: Settings >Regulatory No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 2. Instructions must be provided with the product at the time of purchase, in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. Alternatively, a product-related website is permitted, if a reference (URL) to obtain the website information is provided at the time of purchase in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. The information to the user is provided in the user manual. 3. Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. Access to regulatory information must be provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access. The devices do not require special code, accessories or supplemental plug-ins to access the information. 4. The FCC ID, IC ID, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification. Yes, it is clearly legible without the aid of magnification. 5. Both regulatory information and dedicated exclusive application(s) or script(s) must be secured and implemented in a factory-set- unalterable format. The regulatory information must be capable of being retrieved and displayed locally, and under the control of the end user in possession of the product. The method must be secure, such that the application or script ensures that the regulatory information correctly displayed. Yes, it is secured and the user cannot modify it. C. Labeling for Importation and Purchasing 1. When e-labeling is used, a physical temporary label is also required on the product, or a label on the packaging, at the time of importation, marketing, and sales.8 The physical label can be a summary version of the required regulatory information, such that the product can be identified as complying with the FCC’s equipment authorization requirements. The The FCC logo, FCC ID and model number are present on the product packaging. 3 information may simply be the FCC ID for products subject to certification. Products imported that are already packaged for sale and have a physical temporary label will satisfy this requirement. However, for products imported in bulk and not packaged individually, it is acceptable to use a temporary removable adhesive label on the product, or temporary or permanent labels on the shipping packaging or protective bags. Any removable adhesive label shall be of a type intended to survive normal shipping and handling.

TEL : 886-3-327-3456 Page : G1 of G7 FAX : 886-3-328-4978 Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 Appendix G. Supplemental SAR Tests Results SAR test result 1. The test data is selected according to the worst case SAR configuration per cellular technology. 2. The test data is to demonstrate the device is in compliance with FCC requirements at 25mm when all power reduction mechanisms are OFF. The worst case body SAR at 10mm was used for simultaneous transmission SAR analysis since they are more conservative than the 25mm SAR. Band Mode Test Position Gap (mm) Antenna Sample Battery Power State Non-DBS / DBS Ch. Freq. (MHz) Average Power (dBm) Tune-Up Limit (dBm) Tune-up Scaling Factor Duty Cycle % Duty Cycle Scaling Factor Power Drift (dB) Measured 1g SAR (W/kg) Reported 1g SAR (W/kg) GSM1900_Ant 1 GPRS (4 Tx slots) Back 25mm - Sample 1 Battery 1 DSI 0 - 661 1880 28.12 29.00 1.225 - - -0.04 0.136 0.167 WCDMA IV_Ant 1 RMC 12.2Kbps Back 25mm - Sample 1 Battery 1 DSI 0 - 1513 1752.6 24.43 25.20 1.194 - - 0.04 0.196 0.234 LTE Band 66_Ant 1 20M_QPSK_1_0 Back 25mm - Sample 1 Battery 1 DSI 0 - 132322 1745 24.21 25.20 1.256 - - 0.17 0.181 0.227 FR1 n66_Ant 1 20M_BPSK_1_0 Back 25mm - Sample 1 Battery 1 DSI 0 - 344000 1720 24.16 25.20 1.271 - - -0.04 0.152 0.193 WLAN2.4GHz 802.11b 1Mbps Back 25mm Ant 6+7(6) Sample 1 Battery 1 Power table 0 Non-DBS 1 2412 20.50 21.00 1.122 85.71 1.167 -0.04 0.271 0.355 WLAN5GHz 802.11ac-VHT80 MCS0 Right Side 25mm Ant 6+7(7) Sample 1 Battery 1 Power table 0 Non-DBS 155 5775 20.60 21.00 1.096 85.39 1.171 -0.12 0.654 0.840 WLAN6GHz 802.11ax-HE160 MCS0 Right Side 25mm Ant 6+7(7) Sample 1 Battery 1 Power table 0 Non-DBS 111 6505 12.29 12.50 1.050 85.71 1.167 0.17 0.089 0.109 TEL : 886-3-327-3456 Page : G2 of G7 FAX : 886-3-328-4978 Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 Appendix E. Supplemental SAR Tests Results SAR test result 3. The test data is selected according to the worst case SAR configuration per cellular technology. 4. The test data is to demonstrate the device is in compliance with FCC requirements at 25mm when all power reduction mechanisms are OFF. The worst case body SAR at 10mm was used for simultaneous transmission SAR analysis since they are more conservative than the 25mm SAR. Band Mode Test Position Gap (mm) Sample Battery Power State Ch. Freq. (MHz) Average Power (dBm) Tune-Up Limit (dBm) Tune-up Scaling Factor Power Drift (dB) Measured 1g SAR (W/kg) Reported 1g SAR (W/kg) WCDMA IV_Ant 1 RMC 12.2Kbps Back 25mm Sample 1 Battery 1 DSI 0 1513 1752.6 24.44 25.20 1.191 -0.17 0.210 0.250 Band BW (MHz) Modulation RB Size RB offset Test Position Gap (mm) Sample Battery Power State Ch. Freq. (MHz) Average Power (dBm) Tune-Up Limit (dBm) Tune-up Scaling Factor Power Drift (dB) Measured 1g SAR (W/kg) Reported 1g SAR (W/kg) LTE Band 66_Ant 1 20M QPSK 1 0 Back 25mm Sample 1 Battery 1 DSI 0 132322 1745 24.10 25.20 1.288 -0.17 0.189 0.243 FR1 n66_Ant 1 20M BPSK 50 28 Back 25mm Sample 1 Battery 1 DSI 0 354000 1770 23.82 25.20 1.374 -0.08 0.181 0.249 Band Mode Test Position Gap (mm) Antenna Sample Buttery Power Status Non-DBS / DBS Ch. Freq. (MHz) Average Power (dBm) Tune-Up Limit (dBm) Tune-up Scaling Factor Duty Cycle % Duty Cycle Scaling Factor Power Drift (dB) Measured 1g SAR (W/kg) Reported 1g SAR (W/kg) WLAN2.4GHz 802.11b 1Mbps Back 25mm Ant 6+7(6) Sample 1 Battery 1 Power table 0 Non-DBS 1 2412 20.20 21.00 1.202 85.84 1.165 -0.08 0.262 0.367 WLAN5GHz 802.11ac-VHT80 MCS0 Right Side 25mm Ant 6+7(6) Sample 1 Battery 1 Power table 0 Non-DBS 155 5775 20.40 21.00 1.148 86.15 1.161 -0.08 1.030 1.373 WLAN6GHz 802.11ax-HE160 MCS0 Right Side 25mm Ant 6+7(7) Sample 1 Battery 1 Power table 0 Non-DBS 111 6505 12.10 12.50 1.096 85.76 1.166 -0.01 0.079 0.101 WLAN6GHz 802.11ax-HE160 MCS0 Right Side 25mm Ant 6+7(6) Sample 1 Battery 1 Power table 0 Non-DBS 15 6025 15.10 15.50 1.096 85.76 1.166 0.19 0.071 0.091 TEL : 886-3-327-3456 Page : G3 of G7 FAX : 886-3-328-4978 Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 Appendix G. Power reduction mechanism verification According to the May 2017 TCBC Workshop, Demonstration of proper functioning of the detection and triggering mechanisms to support the corresponding RF exposure conditions. The verification is through a base station simulator is used to establish a conducted RF connection and monitor output power under different operating conditions related to the power reduction mechanisms. Detail of power reduction mechanisms referring to Operational Description 1. Power verification procedure  Establish voice call and audio routed through the earpiece to monitor output power under head with simultaneous transmitting power states for GSM/UMST/LTE/FR1/WiFi  Establish data connection monitor hotspot power state for GSM/UMST/LTE/FR1/WiFi  Establish data connection monitor body worn power state for GSM/UMST/LTE/FR1/WiFi, Body Detect mechanism was performed for the in-hand and on a stationary object (placed on a table)  This device incorporates the Smart Transmit algorithm feature and through under varying Tx power transmission scenarios in real-time to maintain the time-averaged Tx power compliant with RF exposure requirement.  In this power validation purpose is to demonstrate of proper functioning of the detection and triggering mechanisms to support the corresponding RF exposure conditions. In order to avoid real-time TX power varying may affect monitor output power related to the power reduction mechanisms, therefore power reduction verification would be disabled WWAN time average SAR feature.  Verification performed for each technology to demonstrate that the power reduction applies for both technology and call origination. 2. Test setup for measuring power TEL : 886-3-327-3456 Page : G4 of G7 FAX : 886-3-328-4978 Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 3. Verification output Power Results Head exposure condition Head exposure condi…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page : D251 of D432 FAX : 886-3-328-4978 Issued Date : Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 20 256QAM 50 50 19.17 19.23 19.24 18.93 18.91 20 256QAM 100 0 19.45 19.33 19.28 18.91 18.88 Channel 39725 40173 40620 41068 41515 Tune-up limit (dBm) Frequency (MHz) 2503.5 2548.3 2593 2637.8 2682.5 15 QPSK 1 0 23.86 23.81 23.90 23.79 23.83 25 15 QPSK 1 37 23.80 23.78 23.79 23.71 23.70 15 QPSK 1 74 23.80 23.79 23.79 24.02 23.74 15 QPSK 36 0 22.70 22.71 22.93 22.77 22.78 24.2 15 QPSK 36 20 22.94 22.85 22.88 22.83 22.78 15 QPSK 36 39 22.83 22.66 22.94 22.95 22.78 15 QPSK 75 0 22.79 22.80 22.79 22.86 22.75 15 16QAM 1 0 22.80 22.79 22.75 22.74 22.71 24.2 15 16QAM 1 37 22.99 22.81 22.78 22.81 22.70 15 16QAM 1 74 22.91 22.83 22.84 22.95 22.78 15 16QAM 36 0 21.98 21.90 21.69 21.77 21.72 23.2 15 16QAM 36 20 21.98 21.81 21.74 21.75 21.79 15 16QAM 36 39 21.87 21.69 21.86 21.88 21.70 15 16QAM 75 0 21.91 21.82 21.80 21.77 21.71 15 64QAM 1 0 21.84 21.47 21.71 21.81 21.78 23.2 15 64QAM 1 37 21.83 21.77 21.78 21.79 21.71 15 64QAM 1 74 21.85 21.77 21.97 21.91 21.76 15 64QAM 36 0 20.88 20.90 20.70 20.78 20.75 22.2 15 64QAM 36 20 20.78 20.83 20.82 20.83 20.82 15 64QAM 36 39 20.86 20.74 20.91 20.85 20.70 15 64QAM 75 0 20.80 20.76 20.79 20.92 20.73 15 256QAM 1 0 18.78 18.96 18.90 18.84 19.01 20.2 15 256QAM 1 37 18.96 19.20 18.82 18.80 18.88 15 256QAM 1 74 19.11 18.97 19.08 19.04 19.09 15 256QAM 36 0 18.89 19.06 19.15 18.87 18.78 20.2 15 256QAM 36 20 19.17 18.95 19.11 19.02 19.01 15 256QAM 36 39 19.00 19.08 19.13 18.87 18.85 15 256QAM 75 0 19.29 19.23 19.18 18.85 18.79 Channel 39700 40160 40620 41080 41540 Tune-up limit (dBm) Frequency (MHz) 2501 2547 2593 2639 2685 10 QPSK 1 0 23.90 23.77 23.93 23.75 23.81 25 10 QPSK 1 25 23.79 23.80 23.73 23.72 23.70 10 QPSK 1 49 23.85 23.72 23.79 24.03 23.76 10 QPSK 25 0 22.74 22.71 23.00 22.70 22.78 24.2 10 QPSK 25 12 22.86 22.86 22.84 22.76 22.79 10 QPSK 25 25 22.86 22.72 22.95 22.97 22.79 10 QPSK 50 0 22.81 22.79 22.77 22.79 22.70 10 16QAM 1 0 22.76 22.84 22.73 22.72 22.76 24.2 10 16QAM 1 25 22.89 22.77 22.81 22.82 22.74 10 16QAM 1 49 22.85 22.78 22.93 22.93 22.73 10 16QAM 25 0 21.89 21.88 21.71 21.73 21.77 23.2 10 16QAM 25 12 21.94 21.82 21.74 21.83 21.83 10 16QAM 25 25 21.94 21.76 21.84 21.81 21.78 10 16QAM 50 0 21.91 21.80 21.74 21.79 21.76 10 64QAM 1 0 21.80 21.51 21.70 21.77 21.77 23.2 10 64QAM 1 25 21.83 21.82 21.73 21.79 21.73 10 64QAM 1 49 21.82 21.67 21.98 21.96 21.73 10 64QAM 25 0 20.88 20.88 20.80 20.70 20.72 22.2 10 64QAM 25 12 20.80 20.88 20.72 20.81 20.85 10 64QAM 25 25 20.88 20.71 20.85 20.92 20.75 10 64QAM 50 0 20.77 20.84 20.73 20.87 20.81 10 256QAM 1 0 18.79 18.98 18.88 18.78 19.04 20.2 TEL : 886-3-327-3456 Page : D252 of D432 FAX : 886-3-328-4978 Issued Date : Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 10 256QAM 1 25 18.98 19.13 18.78 18.80 18.85 10 256QAM 1 49 19.13 18.97 19.10 19.08 19.04 10 256QAM 25 0 18.96 19.14 19.10 18.85 18.79 20.2 10 256QAM 25 12 19.14 18.99 19.10 19.02 19.09 10 256QAM 25 25 19.00 19.09 19.13 18.90 18.87 10 256QAM 50 0 19.27 19.20 19.10 18.85 18.88 Channel 39675 40148 40620 41093 41565 Tune-up limit (dBm) Frequency (MHz) 2498.5 2545.8 2593 2640.30 2687.5 5 QPSK 1 0 23.92 23.79 23.89 23.77 23.80 25 5 QPSK 1 12 23.86 23.70 23.80 23.73 23.72 5 QPSK 1 24 23.78 23.79 23.77 24.05 23.74 5 QPSK 12 0 22.71 22.76 22.99 22.77 22.72 24.2 5 QPSK 12 7 22.95 22.77 22.78 22.75 22.74 5 QPSK 12 13 22.84 22.69 22.90 22.90 22.76 5 QPSK 25 0 22.82 22.75 22.76 22.85 22.78 5 16QAM 1 0 22.77 22.79 22.72 22.74 22.70 24.2 5 16QAM 1 12 22.97 22.85 22.73 22.78 22.74 5 16QAM 1 24 22.88 22.84 22.91 22.90 22.78 5 16QAM 12 0 21.89 21.85 21.75 21.76 21.75 23.2 5 16QAM 12 7 21.97 21.75 21.74 21.75 21.84 5 16QAM 12 13 21.89 21.75 21.82 21.83 21.72 5 16QAM 25 0 21.95 21.87 21.78 21.78 21.78 5 64QAM 1 0 21.81 21.51 21.72 21.75 21.71 23.2 5 64QAM 1 12 21.86 21.79 21.68 21.71 21.86 5 64QAM 1 24 21.84 21.70 21.92 21.92 21.77 5 64QAM 12 0 20.88 20.84 20.80 20.76 20.72 22.2 5 64QAM 12 7 20.83 20.87 20.80 20.85 20.87 5 64QAM 12 13 20.85 20.70 20.85 20.92 20.77 5 64QAM 25 0 20.86 20.77 20.74 20.91 20.76 5 256QAM 1 0 18.73 19.00 18.93 18.84 18.99 20.2 5 256QAM 1 12 18.96 19.19 18.78 18.76 18.80 5 256QAM 1 24 19.09 19.00 19.10 19.03 19.13 5 256QAM 12 0 18.98 19.11 19.08 18.82 18.85 20.2 5 256QAM 12 7 19.17 18.93 19.07 18.96 19.04 5 256QAM 12 13 19.02 19.08 19.05 18.93 18.83 5 256QAM 25 0 19.30 19.13 19.15 18.84 18.78 TEL : 886-3-327-3456 Page : D253 of D432 FAX : 886-3-328-4978 Issued Date : Template version: 211220 FCC SAR TEST REPORT Report No. :FA411108 <LTE Band 42_Ant 8_DSI 2 (Wlan Off)> BW [MHz] Modulation RB Size RB Offset Power Low Ch. / Freq. Power Middle Ch. / Freq. Power High Ch. / Freq. Tune-up limit (dBm) Channel 42190 42590 42990 Frequency (MHz) 3460 3500 3540 20 QPSK 1 0 23.51 23.76 23.89 25.2 20 QPSK 1 49 23.48 23.79 23.80 20 QPSK 1 99 23.48 23.62 23.65 20 QPSK 50 0 22.47 22.70 22.85 24.2 20 QPSK 50 24 22.57 22.80 22.82 20 QPSK 50 50 22.60 22.75 22.68 20 QPSK 100 0 22.60 22.80 22.79 20 16QAM 1 0 22.38 22.70 22.85 24.2 20 16QAM 1 49 22.48 22.82 22.75 20 16QAM 1 99 22.47 22.67 22.54 20 16QAM 50 0 21.52 21.74 21.84 23.2 20 16QAM 50 24 21.53 21.84 21.91 20 16QAM 50 50 21.53 21.77 21.70 20 16QAM 100 0 21.58 21.69 21.81 20 64QAM 1 0 21.43 21.71 21.86 23.2 20 64QAM 1 49 21.54 21.78 21.80 20 64QAM 1 99 21.44 21.70 21.65 20 64QAM 50 0 20.48 20.75 20.92 22.2 20 64QAM 50 24 20.53 20.78 20.84 20 64QAM 50 50 20.59 20.79 20.72 20 64QAM 100 0 20.54 20.78 20.75 20 256QAM 1 0 18.59 19.01 18.73 20.2 20 256QAM 1 49 18.62 18.57 18.59 20 256QAM 1 99 18.58 18.43 18.50 20 256QAM 50 0 18.63 18.43 18.57 20.2 20 256QAM 50 24 18.47 18.61 18.62 20 256QAM 50 50 18.61 18.54 18.45 20 256QAM 100 0 18.47 18.68 18.59 Channel 42165 42590 43015 Tune-up limit (dBm) Frequency (MHz) 3457.5 3500 3542.5 15 QPSK 1 0 23.35 23.62 23.70 25.2 15 QPSK 1 37 23.28 23.67 23.60 15 QPSK 1 74 23.32 23.49 23.46 15 QPSK 36 0 22.32 22.58 22.71 24.…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page : F1 of F432 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. :FA411108 Appendix F. Output Power Measurement <GSM Note> 1. Per KDB 447498 D01v06, the maximum output power channel is used for SAR testing and for further SAR test reduction. 2. Per KDB 941225 D01v03r01, for SAR test reduction for GSM / GPRS / EDGE modes is determined by the source-based time-averaged output power including tune-up tolerance. The mode with highest specified time-averaged output power should be tested for SAR compliance in the applicable exposure conditions. For modes with the same specified maximum output power and tolerance, the higher number time-slot configuration should be tested. Therefore, the GPRS (4Tx slots) for GSM850/GSM1900 is considered as the primary mode. 3. Other configurations of GSM / GPRS / EDGE are considered as secondary modes. The 3G SAR test reduction procedure is applied, when the maximum output power and tune-up tolerance specified for production units in a secondary mode is ≤ ¼ dB higher than the primary mode, SAR measurement is not required for the secondary mode. <WCDMA Note> 1. The following tests were conducted according to the test requirements outlines in 3GPP TS 34.121 specification. 2. The procedures in KDB 941225 D01v03r01 are applied for 3GPP Rel. 6 HSPA to configure the device in the required sub-test mode(s) to determine SAR test exclusion. 3. Per KDB 941225 D01v03r01, for SAR testing is measured using a 12.2 kbps RMC with TPC bits configured to all “1’s”. 4. Per KDB 941225 D01v03r01, RMC 12.2kbps setting is used to evaluate SAR. The maximum output power and tune-up tolerance specified for production units in HSDPA / HSUPA is ≤ ¼ dB higher than RMC 12.2Kbps or when the highest reported SAR of the RMC12.2Kbps is scaled by the ratio of specified maximum output power and tune-up tolerance of HSDPA / HSUPA to RMC12.2Kbps and the adjusted SAR is ≤ 1.2 W/kg, SAR measurement is not required for HSDPA / HSUPA, and according to the following RF output power, the output power results of the secondary mo…

Text truncated - open the document above for the full version.