V37-PTT-1026Mobile internet device

- 1 - CT1002 Preliminary Spec 2011-06-29 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 2 - Table of Content I- GETTING STARTED Important Safety Precautions 3 Cleaning the Panel 4 Cleaning the Personal Touch Tablet 4 Introduction 4 Buttons Overview 5 Accessories 5 What’s in the Box 6 Charging the Battery 6 Power On/Off and Unlock Tablet 6 II-FUNCTIONNING OF THE TABLET Navigation 7 Home Screen 7 Application Launcher Screen 7 Status Bar 8 Onscreen Keyboard 9 III- SETTINGS Set Up Wi-Fi Connection 10 Set Date and Time 11 Set Up Email 12 Set Up Calendar 13 Create Shortcuts on Home Screen 11 Create Widgets on Home Screen 14 Change Wallpapers 14 Install Third-Part Applications from micro SD 15 IV-CONNECTIONS Browser 16 Wi-Fi 17 Bluetooth 17 PC Connection 18 Connect to TV set 19 V-APPLICATIONS Camera 20 Clock 21 Calculator 22 Gallery 23 Music 24 Video Player 25 File Browser 26 VI-Product Specification 27 Trademark 30 Recycling 30 Declaration of Conformity 26 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 3 - I- GETTING STARTED Important Safety Precautions Always follow these safety precautions when using your Personal Touch Tablet. This will reduce the risk of fire, electric shock and injury. Warning: To reduce the risk of fire of shock hazard, do not expose this product to rain or water. Warning: Keep the product away from direct sunlight and heat source. Warning: To prevent the risk of electric shock, do not remove the cover. Do not disassemble, repair or modify the product by yourself. There are no user-serviceable parts inside. ● Unplug the Personal Touch Tablet before performing maintenance. ● Keep your Personal Touch Tablet out of direct sunlight and heat sources. ● Protect the power cord. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to the point where the power cord is attached to the Personal Touch Tablet. ● Only use the AC adapter included with the Personal Touch Tablet. ● Unplug the power cord from the outlet when the unit is not in charging condition. Only use accessories provided in the package. ● Prevent the product from drops or strong impacts. ● Please backup any important data, repair or other causes may result in data loss. ● Do not disconnect the device during memory formatting or file transfer operations. Otherwise, it may cause program failure or files damage. ● Do not dispose the product in fire to avoid explosion as the product contain rechargeable battery. WARNINGS! • Do not turn up the volume too high, doctors warn against prolonged exposure to high volume. • Stop using the product or lower the volume if you feel your ears ringing. • Excessive sound pressure from earphones and headphones can cause hearing loss. • A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur. • Earphone maximum output voltage : <150mV PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 4 - Cleaning the Panel Treat the screen gently. The screen is made of glass and can be scratched or broken. To clean fingerprints or dust from the screen, it is recommended to use a soft, non-abrasive cloth such as a camera lens cloth to clean the screen. Cleaning the Personal Touch Tablet Clean the outer surface of the Personal Touch Tablet (excluding the screen) with a soft cloth. Introduction Welcome to the Personal Touch Tablet! The Personal Touch Tablet includes these key features: ● Displays Alarm, AppInstaller, Browser, Bluetooth, Calculator, Calendar, Camera, Clock, Email, File Browser, Gallery, HDMI Switch, Music, Setting, Video Player and etc ● Displays digital photos, Play Music and Video ● Wi-Fi function to connect with your access point router for internet browsing ● Micro Secure Digital™ (micro SD) slot for external storage ● Capacitive touch screen for all user operations ● 4GB Internal Memory ● USB2.0 OTG for connection to the PC or USB flash drive PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 5 - Buttons Overview Accessories Power Adapter (depending on the regional requirement, the plug may look different) USB Cable PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 6 - What’s in the Box Personal Touch Tablet AC Power Adapter USB Cable Quick Start Guide Charging the Battery Plug the AC power adapter into the Personal Touch Tablet and into a wall outlet. Icon will be turn flashing with charging sign while the battery is charging. When charging is completed, the battery icon will turn into a steady green. * It is strongly recommended you fully charge the device for about 4-6 hours before use. Power on/off and Unlock Personal Touch Tablet The Personal Touch Tablet is easy to set up. Just follow these steps: 1. To power on the device, press and hold Power button for 3 seconds to turn on tablet. 2. Wait until a screen with a lock and speaker icon show up, gently tap the “Lock” icon and slide it toward the speaker icon to unlock tablet. 3. To power off the device, press and hold the Power button for 2 seconds until a MID options message show up on screen where you can choose Power off option to power off the device. Note: The screen with the lock icon will time out in 10 seconds if you do not unlock it. In case it happens, the Power button can be pressed briefly to make it show up again. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn - 7 - II- FUNCTIONNING OF THE TABLET Navigation Tablet has five home screens by default. You can tailor shortcuts or widgets to home screen to fit your needs by using Add to Home screen function. For more information, refer to “Create Shortcuts on Home Screen” on page 14. Home Screen A typical Home screen with wallpaper, status bar, and few applications at the bottom. ◆ A shortcut to browser ◆ A shortcut to application Launcher screen. ◆ A shortcut to system Settings Application Launcher Screen A typical application Launcher screen is shown below. One icon represents one application which can be run by tapping on the icon. PDF 文件…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Title SizeDocument NumberRev Date:Sheetof Block V0.5 AML8726-M_MID B 110Wednesday, June 08, 2011 Title SizeDocument NumberRev Date:Sheetof Block V0.5 AML8726-M_MID B 110Wednesday, June 08, 2011 Title SizeDocument NumberRev Date:Sheetof Block V0.5 AML8726-M_MID B 110Wednesday, June 08, 2011 LDO +2.5V DC-DC3 +1.8V DC-DC1 DC-DC2 +1.28V +3.3V Battery 1 cell 3.7V DC_IN 5V 3A DCDC Charger PWR_EN PWR_EN PWR_EN PWR_EN DDRII 2 PCS 64Mx16bit OTG 8bitx3 DE,CLK LCD 7' 800X480 Linux Debug GPS SDIO WIFI ADC_KEY VBAT_DET Option for touch IR Codec GPIOS TF CARD HDMI JACK NAND & NOR SPI Nor For Boot 2PCS NAND with TSOP-48 or LGA-52 Core DAC,USB,SATA GPIO,NAND,LCD... DDRII&Codec VCCx2_EN VCC5V USB,HDMI AVDD VGH,VGL,AVDD LED+ Backlight G Sensor Magnetic Sensor 24MHz 32.768KHz RTC LDO +3.3VRTC POWER 1、DDRII can be used 2 PCS 64Mx16bit,2 PCS 128Mx16bit,4 PCS 128Mx8bit,8 PCS 256Mx4bit.Recommand 2 PCS 64Mx16bit. 2、Many NAND types are available(TSOP-48 or LGA52 package). Can be used two NANDs (4 CE total) and 1 PCS I-NAND (SDIO interface). 3、USB 2.0. USB_A is a OTG type. USB_B is USB_Host only. DDRII Controller DQ0-DQ31,A0-A13,BA0-BA2,WEN,CKE CK/CKN,CSN,RASN,CASN,UDM_A,LDM_A, ODT,LDQS_A/LDQSN_A,UDQS_A/UDQSN_A, UDM_B,LDM_B,LDQS_B/LDQSN_B, UDQS_B/UDQSN_B NAND Controller Support general NAND & I-nand(SDIO) IO_0-IO_7,RB0,RB1,CE0, CE1,REN_WR,WEN_CLK, CLE,ALE.SPI NOR Flash Interface. USB_A OTG VBUS,ID,DP,DM,TXTTUNE USB_B HOST VBUS,DP,DM,TXTTUNE RGB Interface 24bit RGB R0-R7,G0-G7,B0-B7, UART & I2C UART_A,I2C_A UART_B,I2C_B TCON VCOM,CPH1,OEV1,CPV1 OEH,STV1,STH1,BL& LED_CS IRU601/RMII/FEC_A 8bit FEC&8bit ITU601& RMII Interface&GPIOC_0-12 (Can be used for interrupt) SATA Controller RXM/RXP,TXM/TXP,SATA_REXT ADC 6 channel CH0-CH3:for Touch CH4:for ADC_KEY RTC 32.768KHz OSC 24MHz IR Remote JTAG&I2S Codec HS_LEFT&HS_RIGHT LINE_LEFT&LINE_RIGHT CVBS & YPbPr VDAC_R,VDAC_G,VDAC_B (Up to 1080p). CVBS HDMI Interface HPD,SDA,SCL,CEC TX_CKN/TX_CKP,TX_0N/TX_0P, TX_1N/TX_1P,TX_2N/TX_2P RMII&ITU601 &FEC_B 1、RMII Interface 2、ITU601 Interface 3 、8bit FEC_B Interface 4、GPIOD_12-23 SDIO Interface SD_A(For SD/MMC/TF Card) GPIO POWER core:1.28V DDRII:1.8V GPIO:3.3V AML8726-M BGA Support up to 128Mx32bit DDRII SDIO & ISO7816 ISO7816 Interface SDIO(can be used for wifi) GP_INPUT 3 GP_Input Demod CVBS UART-Bluetooth ~10V@200mA ~10.4V@50mA ~5V@100mA ~1.8V@800mA ~2.5V@100mA ~1.28V@800mA ~3.3V@10mA ~3.3V@600mA Step Down Step Down Step Down DC-DC4 DC-DC5 DC-DC6 Step Up Step Up Step Up PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Block diagam RF part (SIP module: USI model WM-BN-BM-01): Module uses Broadcom 4329 module shown below: SINGLE-CHIP 802.11n/BLUETOOTH®/FM (Rx AND Tx)

General Appearance of the EUT

FCC ID Lable Location On EUT

Operation Description EUT (FCC ID: V37-PTT-1026) is a mobile internet device (touch screen), using a 12 V/2 A power adapter (at DC input jack). EUT is equipped with power/charger input port, USB2.0 OTG, HDMI 1.3, micro SD/TF Card slot, Camera, Volume buttons, headphone jack, microphone, gravity sensor, Power button and Reset button. For wireless connection, it supports IEEE 802.11bgn20/40 WiFi (limited for USA to 11 channels for 11bgn20: 2412-2462MHz and 7 channels for 11n40: 2422- 2452MHz) and Bluetooth (70 channels from 2402-2480MHz) wireless connections (ad hoc mode is not supported by the device). WiFi modulation used is DSSS (CCK, BPSK, QPSK) and OFDM and Bluetooth modulation used is FHSS (GFSK). Based on USI WM-BN-BM-01 SIP module with Broadcom BCM4329 chipset. WiFi has rated power of 13dBm and Bluetooth has rated power of 4dBm, both using the same 0dBi internal PCB antenna. WiFi and Bluetooth can/do not transmit simultaneously. Circuit description: 12V input power is used for charging the battery and converted to 5V, 3.3V, 1.8V and 1.25V for supply power to all chipset and circuits. MCU controls NAND flash and DDR, SATA, micro SD/TF Card/Slot, LCD Display, HDMI circuitry, SDIO for WiFi/BT module, etc, and function control buttons. The main board uses two Crystals: 24MHz and 32.768kHz. 32.768kHz is used for RF module also.

FCC ID : V37-PTT-1026 (Portable device) According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 (2)(a)(i) Frequency Range Low Frequency (MHz) High Frequency(MHz) Center frequency (MHz) 60/f SAR Limitation (mw) 2412 2462 2437 25 Maximum measured transmitter power: 802.11b Conducted Power (mw) 18.58 Maximum measured transmitter power: 802.11g Conducted Power (mw) 19.19 Maximum measured transmitter power: 802.11n(20M) Conducted Power (mw) 18.11 Maximum measured transmitter power: 802.11n(40M) Conducted Power (mw) 18.66 Threshold at which no SAR required is 25 mw. Antenna gain is 0dBi, so the Maximum Tx power is 19.19mw EIRP. Conclusion: No SAR is required. SIMULTANEOUS TRANSMISSION EVALUATION Wish N/A Signature _________________________ Kelly Chen Board Chairman Tel: +886-2-2749-3937 Fax: +886-2-2749-3918 WIN ACCORD LTD. 12F, NO. 225, SEC 5, 105 SONG SHAN DIST., NAN JING EAST ROAD, TAIPEI, TAIWAN

5 5 4 4 3 3 2 2 1 1 DD CC BB AA RF_GPSRF_IN RF_IN GPS_TXD0 GPS_RXD0RF_GPS GPS_TXD0GPS_RXD0 GPS_VBATVCCK GPS_VBATVCC_RTC1 VDD_IN VDD_IN VDD_IN VCC_RTC1 VDD_IN P3.3V VDD_IN VDD_IN VDD_IN GPS_VBAT VDD_IN P3.3V VDD_IN VDD_IN P3.3V P3.3V P3.3V GPS_EN GPS_RST_N Linux_TXLinux_RX G9091-330T11U SOT-23-5 GPS RTC Power GPS Module GPS_RSTN 1.8V 1.2V FB48NC/120R_0.3A_0603 L0603 FB48NC/120R_0.3A_0603 L0603 U831 TXB0102 U831 TXB0102 B2 1 GND 2 VCCA 3 A2 4 A1 5 OE 6 VCCB 7 B1 8 U830 AH-0808 U830 AH-0808 MODE 1 /RESET 2 TX 3 RX 4 RFIN 5 GND 6 VCC1.8V 7 BAT1.2V 8 R358NC R0402 R358NC R0402 C413 0.1u 0402 +80%-20% SMD/25V C0402 C413 0.1u 0402 +80%-20% SMD/25V C0402 C411 0.1u 0402 +80%-20% SMD/25V C0402 C411 0.1u 0402 +80%-20% SMD/25V C0402 C404 NC/0.1uF C0603 C404 NC/0.1uF C0603 R345 Res 22 0402 5% SMD R0402 R345 Res 22 0402 5% SMD R0402 L23 0R L0603 L23 0R L0603 C401 10u 0805 +80%-20% SMD/16V C0805 C401 10u 0805 +80%-20% SMD/16V C0805 U828 PT5108-1.8/SOT23-5 SOT-23-5 U828 PT5108-1.8/SOT23-5 SOT-23-5 VIN 1 GND 2 ON/OFF 3 NC 4 VOUT 5 R359 Res 4.7K 0402 5% SMD R0402 R359 Res 4.7K 0402 5% SMD R0402 U829 PT5108-1.2/SOT23-5 SOT-23-5 U829 PT5108-1.2/SOT23-5 SOT-23-5 VIN 1 GND 2 ON/OFF 3 NC 4 VOUT 5 C406 0.1u 0402 +80%-20% SMD/25V C0402 C406 0.1u 0402 +80%-20% SMD/25V C0402 C407 56PF c0603 C407 56PF c0603 D10 CMS01/SMT CMS01 D10 CMS01/SMT CMS01 J15 ACA-5036-A3-CC-S J15 ACA-5036-A3-CC-S FEED 1 GND 2 GND 3 C403 NC/0.1uF c0603 C403 NC/0.1uF c0603 R343 Res 0 0402 5% SMD R0402 R343 Res 0 0402 5% SMD R0402 C405 2.2u 0603 +80%-20% SMD/16V C0603 C405 2.2u 0603 +80%-20% SMD/16V C0603 FB50 33NH/1206 l0603 FB50 33NH/1206 l0603 FB49 1KR l0603 FB49 1KR l0603 C412 0.1u 0402 +80%-20% SMD/25V C0402 C412 0.1u 0402 +80%-20% SMD/25V C0402 C402 0.1u 0402 +80%-20% SMD/25V C0402 C402 0.1u 0402 +80%-20% SMD/25V C0402 R346 Res 0 0402 5% SMD R0402 R346 Res 0 0402 5% SMD R0402 C414 0.1u 0402 +80%-20% SMD/25V C0402 C414 0.1u 0402 +80%-20% SMD/25V C0402 FB58 1KR l0603 FB58 1KR l0603 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 5 5 4 4 3 3 2 2 1 1 DD CC BB AA G_SDA SA0 G_SCL I2C_SDA I2C_SDA I2C_SCL AUX_CL I2C_SCL G_SDA G_VDDIO G_VDD I2C_SDA AUX_DA I2C_SCL GSEN_INT1 G_SCL AUX_CL AUX_DA mmc_SDA mmc_SCL AUX_CL AUX_DA mmc_SCL mmc_SDA mmc_SCL mmc_SDAI2C_SDA I2C_SCL GSENSOR_INT VCC3.3V P3.3V P3.3V P3.3V P3.3V GND GND GND GND GND GND P3.3V I2C_SDA I2C_SCL GSENSOR_INT GSEN_INT1 Far from Speaker, >50mm Far from Power line,>10mm SLAVE ADDRESS SA0 0 1 0X1C 0X1D 3D G-Sensor Magnetic Sensor FB53 BEAD/121Y/0603/1A SMD L0603 FB53 BEAD/121Y/0603/1A SMD L0603 FB40 BEAD/121Y/0603/1A SMD L0603 FB40 BEAD/121Y/0603/1A SMD L0603 R128 NC R0402 R128 NC R0402 C216 0.0022u(2.2nF) 0402 +80%-20% SMD/50V C0402 C216 0.0022u(2.2nF) 0402 +80%-20% SMD/50V C0402 R336Res 0 0402 5% SMDR0402R336Res 0 0402 5% SMDR0402 R324 Res 0 0402 5% SMD R0402 R324 Res 0 0402 5% SMD R0402 R334 10K 0402 5% SMD R0402 R334 10K 0402 5% SMD R0402 R335 NC Res 0 0402 5% SMD R0402 R335 NC Res 0 0402 5% SMD R0402 R357NCR0402R357NCR0402 C369 0.1u 0402 +80%-20% SMD/25V C0402 C369 0.1u 0402 +80%-20% SMD/25V C0402 R337 NC Res 0 0402 5% SMD R0402 R337 NC Res 0 0402 5% SMD R0402 R350 0RR0402R350 0RR0402 U32 MMA8453QT MMA8452Q U32 MMA8453QT MMA8452Q VDDIO 1 BYP 2 NC 3 SCL 4 GND 5 SDA 6 SA0 7 NC 8 INT2 9 GND 10 INT1 11 GND 12 NC 13 VDD 14 NC 15 NC 16 R315 Res 0 0402 5% SMD R0402 R315 Res 0 0402 5% SMD R0402 R130 NC 0R R0402 R130 NC 0R R0402 C211 NC C0805 C211 NC C0805 1 2 FB42 BEAD/121Y/0603/1A SMD L0603 FB42 BEAD/121Y/0603/1A SMD L0603 FB46 BEAD/121Y/0603/1A SMDL0603 FB46 BEAD/121Y/0603/1A SMDL0603 R349 0RR0402R349 0RR0402 R314 NC R0402 R314 NC R0402 C224 1u 0402 +80%-20% SMD/25V C0402 C224 1u 0402 +80%-20% SMD/25V C0402 C210 0.1u 0402 +80%-20% SMD/25V C0402 C210 0.1u 0402 +80%-20% SMD/25V C0402 C217 0.1u 0402 +80%-20% SMD/25V C0402 C217 0.1u 0402 +80%-20% SMD/25V C0402 C368 4.7u0603 +80%-20% SMD/6.3V C0603 C368 4.7u0603 +80%-20% SMD/6.3V C0603 R356NCR0402R356NCR0402 U33 MMC3140MS/QFN10 QFN_10_0.5MM U33 MMC3140MS/QFN10 QFN_10_0.5MM C+ 10 C- 9 CAP 4 TEST/NC 5 VDA 3 VDD 6 SDA 7 SCL 8 FM/NC 2 GND 1 EPAD 11 U807 MPU-3050/QFN24 QFN24-3050 U807 MPU-3050/QFN24 QFN24-3050 CLKIN 1 NC 2 NC 3 NC 4 NC 5 AUX_DA 6 VLOGIC 8 AD0/SDO 9 REGOUT 10 FSYNC 11 INT 12 VDD 13 NC 14 NC 15 NC 16 NC 17 GND 18 RESV 19 CPOUT 20 RESV 21 CLKOUT 22 SCL/SCLK 23 SDA/ADI 24 AUX CL 7 C391 1u 0402 +80%-20% SMD/25V C0402 C391 1u 0402 +80%-20% SMD/25V C0402 1 2 R129 Res 10K 0402 5% SMD R0402 R129 Res 10K 0402 5% SMD R0402 R348Res 0 0402 5% SMDR0402R348Res 0 0402 5% SMDR0402R86 Res 10K 0402 5% SMD R0402 R86 Res 10K 0402 5% SMD R0402 C318 0.1u 0402 +80%-20% SMD/25V C0402 C318 0.1u 0402 +80%-20% SMD/25V C0402 1 2 R81 Res 22 0402 5% SMD R0402 R81 Res 22 0402 5% SMD R0402 FB51 10R/0603 L0603 FB51 10R/0603 L0603 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 5 5 4 4 3 3 2 2 1 1 DD CC BB AA USBP1-PCI USBP1+PCI UIM_PWR USBP1+PCI USBP1-PCI EVDO_EN_PCI EVDO_RST_PCI EVDO_RST_PCI EVDO_EN_PCI EVDO_POWERON 3G_PCM_CLK 3G_PCM_DOUT 3G_PCM_DIN 3G_PCM_SYNC 3G_PCM_CLK 3G_PCM_DOUT 3G_PCM_DIN 3G_PCM_SYNC SIM_IN UIM_PWR UIM_RST UIM_CLK UIM_DAT UIM_DAT UIM_CLK UIM_RST EVDO_3V3 EVDO_3V3 EVDO_3V3 VINVIN VCC3.3V EVDO_3V3EVDO_3V3EVDO_3V3EVDO_3V3EVDO_3V3 EVDO_3V3VIN EVDO_3V3EVDO_3V3 EVDO_EN EVDO_RST EVDO_POWERON I2S_SCLK I2S_DIN I2S_DOUT I2S_LRCK SIM_IN SIM_IN EVDO_POWERON USB11_DP USB11_DM Title SizeDocument NumberRev Date:Sheet of <Doc><RevCode> <Title> B 11Thursday, June 09, 2011 Title SizeDocument NumberRev Date:Sheetof <Doc><RevCode> <Title> B 11Thursday, June 09, 2011 Title SizeDocument NumberRev Date:Sheetof <Doc><RevCode> <Title> B 11Thursday, June 09, 2011 3G module EM660C work about power: Strong signal 300-400mA @ 3V3 If the signal is 500-800mA @ 3V3 C12 0.1uF C0402 C12 0.1uF C0402 R80Res 0 0402 5% SMDR0402R80Res 0 0402 5% SMDR0402 R198 910KR198 910K R276 100RR0402R276 100RR0402 C261 100pF C0402 C261 100pF C0402 U39 PCI80019 U39 PCI80019 WAKE 1 COEX1 3 COEX2 5 CLKREQ 7 GND 9 REFCLK- 11 REFCLK+ 13 GND 15 Reserved 17 Reserved 19 GND 21 PERn0 23 PERp0 25 GND 27…

Text truncated - open the document above for the full version.

DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110624055F FCC ID: V37-PTT-1026 DATE: 07/18/2011 Page 1 of 77 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Mobile internet device MODEL No.: CT1002, PT10001-46-XXX(X=A-Z , 0-9 , a-z), IDX10 BRAND NAME: N/A FCC ID: V37-PTT-1026 REPORT NO.: KAD110624055F ISSUE DATE: July 18, 2011 Prepared for WIN ACCORD LTD. 12F, NO. 225, SEC 5, 105 SONG SHAN DIST., NAN JING EAST ROAD, TAIPEI, TAIWAN Prepared by DONGGUAN EMTEK CO., LTD No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110624055F FCC ID: V37-PTT-1026 DATE: 07/18/2011 Page 2 of 55 VERIFICATION OF COMPLIANCE Applicant: WIN ACCORD LTD. 12F, NO. 225, SEC 5, 105 SONG SHAN DIST., NAN JING EAST ROAD, TAIPEI, TAIWAN Manufacturer: WIN ACCORD LTD. Guangdong Nanhai Road, Nanshan District, Shenzhen City, Garden City, 1079 7th Floor, Block A, Cyber Tower Product Description: Mobile internet device Brand Name: N/A Model Number: CT1002, PT10001-46-XXX(X=A-Z , 0-9 , a-z), IDX10 (Note: These samples are the same except model number, so we prepare CT1002 for EMC test.) Serial Number: N/A File Number: KAD110624055F Date of Test: June 24, 2011 to July 18, 2011 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. also, the model complies with Canadian RSS-210 Issue 6 standard. The test results of this report relate only to the tested sample identified in this report. Approved By Sam.Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110624055F FCC ID: V37-PTT-1026 DATE: 07/18/2011 Page 3 of 55 Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION ................................................................................................. 5 1.1 PRODUCT DESCRIPTION........................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ..................................................................................................... 6 1.3 TEST METHODOLOGY.............................................................................................................................. 6 1.4 SPECIAL ACCESSORIES............................................................................................................................ 6 1.5 EQUIPMENT MODIFICATIONS.................................................................................................................. 6 1.6 TEST FACILITY........................................................................................................................................ 6 2. SYSTEM TEST CONFIGURATION .................................................................................... 7 2.1 EUT CONFIGURATION............................................................................................................................. 7 2.2 EUT EXERCISE........................................................................................................................................ 7 2.3 TEST PROCEDURE.................................................................................................................................... 7 2.4 CONFIGURATION OF TESTED SYSTEM..................................................................................................... 7 3. DESCRIPTION OF TEST MODES ...................................................................................... 9 4. CONDUCTED EMISSIONS TEST ..................................................................................... 10 4.1 MEASUREMENT PROCEDURE:................................................................................................................ 10 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 10 4.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 10 4.4 CONDUCTED EMISSION LIMIT................................................................................................................ 11 4.5 MEASUREMENT RESULT:....................................................................................................................... 11 4.6 CONDUCTED MEASUREMENT PHOTOS: .................................................................................................. 14 5. RADIATED EMISSION TEST ............................................................................................ 15 5.1 MEASUREMENT PROCEDURE................................................................................................................. 15 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 16 5.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 17 5.4 RADIATED EMISSION LIMIT..................................................................................................................... 17 5.5 MEASUREMENT RESULT......................................................................................................................... 18 5.6 RADIATED MEASUREMENT PHOTOS: ..................................................................................................... 30 6. OCCUPIED BANDWIDTH TEST....................................................................................... 31 6.1 MEASUREMENT PROCEDURE.............................…

Text truncated - open the document above for the full version.

Setup Photos