
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
IC Statement
Statement of Compliance Letter FCC ID οΌV3J-JB2 Product : Jawbone Model : JB2 To whom it may concern: We, the undersigned, hereby certify that we responsible to comply with the relevant provisions of the Bluetooth 2.0 specification and certificate program as bellows: a. Comply with the Bluetooth 2.0 technical description of the hopping sequence pseudorandom. b. Comply with the Bluetooth 2.0 technical description of each channel used equally on average. c. Comply with the Bluetooth 2.0 technical description ,the associated system receiver have a compliant input bandwidth, based on the measured 20 dB emission bandwidth. d. Comply with the Bluetooth 2.0 technical description ,the associated system receiver have the ability to hop in synchronization with the transmitter. e. The design of the frequency hopping system allow it to comply with all pertinent requirements when presented with a lengthy data stream. f. The frequency hopping system comply with the non-coordination requirement.
47173 Benicia Street, Fremont CA 94538 Tel: 510-771-1000, Fax: 510-661-0888 Federal Communication Commissions 7435 Oakland Mills Road Columbia MD 21046 Subject: Request to delete previous submitted file Ref: Applicant: Aliph Com Inc. FCC ID: FCC ID: V3J-JB2 Grant Dated. April 09, 2008 To Whom It May Concern: Compliance Certification Services (CCS) is requesting the FCC to delete previous submitted FCC ID label format and location file from public accessible database. The specific file submitted contains device photos which Aliph would like to be blocked from public access due to marketing requirement. The specific file to be deleted: File name: FCC ID label format and location, date submitted: April 09, 2008. Best Regards Mike Kuo / V.P. Compliance Certification Services April 11, 2008
47173 Benicia Street, Fremont CA 94538 Tel: 510-771-1000, Fax: 510-661-0888 Federal Communication Commissions 7435 Oakland Mills Road Columbia MD 21046 Subject: Request to replace one previous submitted file Ref: Applicant: Aliph Com FCC ID: V3J-JB2 Grant date: April 10, 2008 To Whom It May Concern: Compliance Certification Services (CCS) is the TCB issued above grant for equipment authorization. Per applicantβs request and confirmation from FCC, CCS-TCB is requesting FCC to : 1. Delete the FCC ID label file uploaded on 04/11/2008 due to the file contains confidential information. 2. CCS-TCB will modify the grant condition per the confirmation from FCC. Attached is the Aliph confirmation letter to acknowledge 04/11/08 FCC ID label file can be accessible by general public since 04/11/2008. Best Regards Mike Kuo / V.P. Compliance Certification Services July 14, 2008
Compliance Certification Services Inc. Report No.80214302 Page 1 of 13 External Photo Compliance Certification Services Inc. Report No.80214302 Page 9 of 13 Power Adapter Photo Compliance Certification Services Inc. Report No.80214302 Page 13 of 13 Cable Photo
Label Location
Compliance Certification Services Inc. Report No.80214302 Page 2 of 13 Internal Photo Compliance Certification Services Inc. Report No.80214302 Page 3 of 13 Compliance Certification Services Inc. Report No.80214302 Page 4 of 13 Compliance Certification Services Inc. Report No.80214302 Page 5 of 13 Compliance Certification Services Inc. Report No.80214302 Page 6 of 13 Compliance Certification Services Inc. Report No.80214302 Page 7 of 13 Compliance Certification Services Inc. Report No.80214302 Page 8 of 13 Compliance Certification Services Inc. Report No.80214302 Page 10 of 13 Compliance Certification Services Inc. Report No.80214302 Page 11 of 13 Compliance Certification Services Inc. Report No.80214302 Page 12 of 13
Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 1 of 91 FCC 47 CFR PART 15 SUBPART C AND ANSI C63.4 : 2003 TEST REPORT For Jawbone Model : JB2 Trade Name : Jawbone Issued for Aliph com 150 Executive Park Blvd. Suite 4550, San Francisco, CA94134 Issued by Compliance Certification Services Inc. Hsinchu Lab. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung HsingRd., ChuTung Chen, Hsinchu, Taiwan 310, R.O.C TEL: (03) 591-0068 FAX: (03) 582-5720 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NVLAP or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 2 of 91 TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION........................................................................................... 3 2. EUT DESCRIPTION.................................................................................................................. 4 2.1 DESCRIPTION OF EUT & POWER.................................................................................... 4 3. DESCRIPTION OF TEST MODES .......................................................................................... 5 4. TEST METHODOLOGY............................................................................................................6 5. FACILITIES AND ACCREDITATIONS .................................................................................. 7 5.1 FACILITIES .......................................................................................................................... 7 5.2 EQUIPMENT ........................................................................................................................ 7 5.3 LABORATORY ACCREDITATIONS LISTINGS................................................................... 7 5.4 TABLE OF ACCREDITATIONS AND LISTINGS ................................................................ 8 6. CALIBRATION AND UNCERTAINTY .................................................................................... 9 6.1 MEASURING INSTRUMENT CALIBRATION ..................................................................... 9 6.2 MEASUREMENT UNCERTAINTY....................................................................................... 9 7. SETUP OF EQUIPMENT UNDER TEST................................................................................ 10 8. APPLICABLE LIMITS AND TEST RESULTS ....................................................................... 11 8.1 20dB BANDWIDTH FOR HOPPING................................................................................... 11-18 8.2 MAXIMUM PEAK OUTPUT POWER ................................................................................. 19-26 8.3 HOPPING CHANNEL SEPARATION.................................................................................. 27-30 8.4 NUMBER OF HOPPING FREQUENCY USED .................................................................. 31-34 8.5 DWELL TIME ON EACH CHANNEL .................................................................................. 35-42 8.6 CONDUCTED SPURIOUS EMISSION................................................................................ 43-52 8.7 RADIATED EMISSIONS ...................................................................................................... 53 8.7.1 TRANSMITTER RADIATED SUPURIOUS EMSSIONS ................................................ 53-56 8.7.2 WORST-CASE RADIATED EMISSION BELOW 1 GHz ................................................ 57-59 8.7.3 TRANSMITTER RADIATED EMISSION ABOVE 1 GHz............................................... 60-65 8.7.4 RESTRICTED BAND EDGES ........................................................................................ 66-73 8.8 POWERLINE CONDUCTED EMISSIONS .......................................................................... 74-79 9. ANTENNA REQUIREMENT .................................................................................................... 80 9.1 STANDARD APPLICABLE................................................................................................... 80 9.2 ANTENNA CONNECTED CONSTRUCTION ...................................................................... 80 APPENDIX SETUP PHOTOS....................................................................................................... 81-91 Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 3 of 91 1. TEST REPORT CERTIFICATION Applicant Aliph com Address 150 Executive Park Blvd. Suite 4550, San Francisco, CA94134 Equipment Under Test Jawbone Model JB2 Trade Name Jawbone Tested Date February 14 ~ 29, 2008 APPLICABLE STANDARD STANDARD TEST RESULT FCC Part 15 Subpart C:2006 AND ANSI C63.4:2003 No non-compliance noted WE HEREBY CERTIFY THAT: The measurements shown in the attachment were made in accordance with the procedures indicated, and the energy emitted by the equipment was found to be within the limits applicable. We assume full responsibility for the accuracy and completeness of these measurements and vouch for the qualifications of all persons taking them. Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 4 of 91 2. EUT DESCRIPTION 2.1 DESCRIPTION OF EUT & POWER Product Name Jawbone Model Number JB2 Frequency Range 2402MHz to 2480MHz f = 2402 + nMHz, n = 0, .....78 Transmit Power 1.66dBm Channel Spacing 1MHz Channel Number 79 Channel Air Data Rate GFSK (1Mbps),Ο/4-DQPSK(2Mbps), 8-DPSK(3Mbps) Type of Modulation Frequency Hopping Spread Spectrum Frequency Selection by software / firmware Transmitter Classification portable device Antenβ¦
Text truncated - open the document above for the full version.
Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 81 of 91 APPENDIX SETUP PHOTOS RADIATED MEASUREMENT SETUP Normal Operating Mode Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 82 of 91 Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 83 of 91 Charging Mode (From Notebook PC) Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 84 of 91 Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 85 of 91 Charging Mode (From Power Adapter) Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 86 of 91 Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 87 of 91 RADIATED RF MEASUREMENT SETUP Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 88 of 91 Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 89 of 91 RF PORT COUNTED MEASURE SETUP Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 90 of 91 POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP Charging Mode (From Notebook PC) Compliance Certification Services Inc.FCC ID V3J-JB2 Report No.80214302-RP1 Page 91 of 91 Charging Mode (From Power Adapter)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.50 mW |

Band
Equipment Class
DTS - Digital Transmission System
Band
Equipment Class
DTS - Digital Transmission System
Bluetooth device
Equipment Class
DTS - Digital Transmission System
Headset
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
J2013
Equipment Class
DTS - Digital Transmission System