V3J-JBEJawbone

Jawbone JBE User Guide :: 8.3.2010 Image needs highlighted in yellow CONTENTS JBE Anatomy Power Up 1. Get Connected 2. Get Listening (I’m slim on content for this proposed section) 3. Get Talking 4. Get Apps & More Troubleshooting Specifications Safety Information JBE ANATOMY Image of JBE (2 are probably required: top & side perspectives) • Micro USB (for charging/power) • On/Off & Pairing Switch • Audio Input (3.5mm stereo mini-jack) • LED Ring (is it a ring?) • Volume Buttons • TALK Button • Built-in Microphone If the LED Ring is... Flashing White: Jawbone is trying to connect to your phone or Bluetooth® device. Flashing Red: Battery is low. Power up! Flashing Red + White: Jawbone is in pairing mode and ready to connect to your phone or Bluetooth® device. Go to your phone’s Bluetooth settings to connect. POWER UP Your Jawbone JBE is partially charged and ready to use right out of the box. Image that shows device being plugged in and powered via USB For a Full Charge: Plug it into your wall charger or a USB port on your computer. To Hear Remaining Battery Life: Press the TALK BUTTON when not on a call. When Battery Is Low: The LED RING flashes RED. When Fully Charge: The LED RING turns WHITE. Note: A full charge takes 3 hours and results in up to 5 hours of listening time. 1. GET CONNECTED 1.1 Plug & Play Image that shows both possible cable connections (USB & 3.5mm) Play audio from any device through USB or 3.5mm stereo mini-jack. The volume is loudest when plugged in via USB. 1.2 Connect Wirelessly Image that shows the range of products that JBE can pair with (phone, tablet, laptop) Your Jawbone can wirelessly stream audio from any A2DP-enabled Bluetooth device within 150 feet. Just follow these steps: 1.2a Prepare Your Jawbone Diagram for pairing action (similar to ICON) 1. Hold the ON/OFF SWITCH in the upmost position 2. Wait for the LED RING to flash red & white 3. You will hear “Jawbone is ready, waiting to connect” 4. Release the ON/OFF SWITCH to the middle/on position 12.b Prepare Your Phone or Device Turn on Bluetooth®. On a iPhone, iPod or iPad: Go to SETTINGS > GENERAL > and enable BLUETOOTH On a Blackberry®: Go to SETTINGS/OPTIONS > BLUETOOTH and enable BLUETOOTH Other Cell Phones: Go to Jawbone.com/Pairing or review the instruction manual that came with your phone. 1.2c Make the Connection Go to your phone or device’s Bluetooth® settings. Add or search for devices: When “Jawbone JBE” appears, select it. If asked for a passcode: Enter “0000” This is a one-time event per device. To pair your Jawbone JBE to another device, repeat steps 1.2a to 1.2c. 2 GET LISTENING (worthy of it’s own section? I’m slim on content here) 2.1 Adjust the volume Same copy as ICON, but flip to this “...while listening to music or on a call,...” 3 GET TALKING Same as ICON instructions, but delete 3.4 and 3.5 4 GET APPS & MORE Same as ICON instructions, but replace all mentions of “ICON” with “JBE” AND delete “INNOVATIONS” section; also change “UPDATES” title to “UPDATE” TROUBLESHOOTING 1. Hearing distortion? a. Lower your volume b. Low battery Æ connect to power via USB 2. Not loud enough? a. Turn up volume on your audio player b. Make sure it’s charged up c. Plug it in to your audio player 3. Unable to pair with Bluetooth device? a. Confirm device is stereo Bluetooth 2.0 A2DP compatible b. Following GET CONNECTIONS instructions in this guide c. Visit www.jawbone.com/support 4. Experiencing signal loss or dropouts via Bluetooth? a. Move closer to audio player b. Make sure it’s charged up c. Confirm device is stereo Bluetooth 2.0 A2DP compatible SPECIFICATIONS Battery Life: Up to 5 hours Power: 2w x 2 <0.1%THD Output: 95dB @ 0.5m Frequency R: 80Hz-20kHZ +/- 3dB AC Adapter: 5V 550mA Max 2.5W Dimensions: ??? Weight: 327 gram 11.5oz Bluetooth® Range: 150 feet (x meters) SAFETY INFORMATION TBD GET MORE HELP (if you need it) Change purchase text: “Purchase Jawbone products and accessories at WWW.JAWBONE.COM FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution -Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. -This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IC RSS-GEN: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

REQUEST FOR CONFIDENTIAL TREATMENT October 25, 2010 [Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046] Re: Aliph Equipment Certification Application (FCC ID V3J-JBE) To whom it may concern: Pursuant to Sections 0.457 and 0.459 of the rules of the Federal Communications Commission (“Commission”), 47 C.F.R. §§ 0.457, 0.459, Aliph requests that the above- referenced equipment certification application (FCC ID V3J-JBE) (“Application”), including all related exhibits, attachments, and correspondence, be withheld from public inspection and accorded confidential treatment, as specified below. In support of this request for confidential treatment and pursuant to the requirements under Section 0.459(b) of the Commission’s rules, Aliph provides the following information: (1) Identification of information for which confidential treatment is sought: Aliph seeks short-term (as specified in Paragraph No. 8 below) confidential treatment of all protectable information set forth in the Application, including related exhibits and attachments (collectively, “Short-term Confidential Documents”). Short-term Confidential Documents include (i) Internal Photographs of the Device (ii) External Photographs of the Device (iii) User Manual (iv) Test Setup Photographs Additionally, Aliph seeks long-term (as specified in Paragraph No. 8 below) confidential treatment of the following exhibits and attachments to the Application (collectively, “Long-term Confidential Documents”): (i) Schematic Diagram; (ii) Block Diagram; (iii) Theory of Operation; (iv) ANT Specification; (2) Identification of the circumstances giving rise to the submission: The Short-term and Long-term Confidential Documents have been submitted in connection with the Application. (3) Explanation of the degree to which the information is commercial or financial, or contains trade secrets or is privileged: The Short-term and Long-term Confidential Documents contain highly sensitive information, including detailed technical specifications and diagrams, concerning proprietary equipment to be commercially launched in the near term. This information constitutes trade secrets or sensitive commercial and technical information that would customarily be guarded from competitors, and is therefore exempt from mandatory disclosure under Exemption 4 of the Freedom of Information Act (“FOIA Exemption 4”), 5 U.S.C. § 552(b)(4), and Section 0.457(d) of the Commission’s rules, 47 C.F.R. § 0.457(d). (4) Explanation of the degree to which the information concerns a service that is subject to competition: The Short-term and Long-term Confidential Documents contain highly sensitive information concerning proprietary equipment, the development, manufacturing, and commercial sale of which are subject to competition from numerous equipment suppliers. (5) Explanation of how disclosure of the information could result in substantial competitive harm: Public disclosure of the Short-term and Long-term Confidential Documents likely would result in substantial competitive harm to Aliph. For example, disclosure of this information would allow competitors to use this information to their commercial advantage. Knowledge of the unique technical specifications of the Aliph equipment could allow competitors to benefit from Aliph’s efforts and develop or improve upon similar equipment, while avoiding research and development expenses. (6) Identification of any measures taken by the submitting party to prevent unauthorized disclosure: Aliph has instituted an internal policy prohibiting employees from divulging any proprietary or confidential information regarding its various commercial products. Aliph also requires consultants, subcontractors, and other third parties involved in the development, marketing, and sale of its commercial products to execute nondisclosure agreements to protect the confidentiality of certain information regarding those commercial products. (7) Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: Information contained in the Short-term and Long-term Confidential Documents is not generally available to the public. Consistent with and except as provided under appropriate nondisclosure agreements or requirements, there has been no disclosure of this information to any third parties. (8) Justification of the period during which the submitting party asserts that material should not be available for public disclosure: Aliph requests confidential treatment of the Short-term Confidential Documents for 180 days after grant of the Application. This limited period will allow Aliph to protect against public disclosure of proprietary and highly sensitive information prior to the commercial launch of its equipment. Moreover, the Commission routinely grants requests for confidential treatment of equipment certification applications for 180 days after grant of the application. Additionally, Aliph requests confidential treatment of the Long-term Confidential Documents for an indefinite period. These documents contain detailed technical specifications and diagrams that constitute proprietary and extremely sensitive information. During the commercial and operational lifetime of the Aliph equipment, competitors could use the otherwise confidential information to develop or improve upon similar equipment and to undermine the marketing and sale of the Aliph equipment. (9) Any other information that the party believes useful in assessing the confidentiality request: To provide adequate protection from public disclosure, dissemination of information contained in the Short-term and Long-term Confidential Documents should be limited within the Commission or the Certification Division of Compliance Certification Services (“Certification Division”) on a “need to know” basis. In the event that any person or entity outside the Commission or the Certification Division requests…

Text truncated - open the document above for the full version.

Report No.T100923305 Page 1 of 17 External Photo Report No.T100923305 Page 2 of 17

S/N BOTTOM COVER JBE LABEL LOCATION IMAGE

Report No.T100923305 Page 3 of 17 Internal Photo Report No.T100923305 Page 4 of 17 Report No.T100923305 Page 5 of 17 Report No.T100923305 Page 6 of 17 Report No.T100923305 Page 7 of 17 Report No.T100923305 Page 8 of 17 Report No.T100923305 Page 9 of 17 Report No.T100923305 Page 10 of 17 Report No.T100923305 Page 11 of 17 Report No.T100923305 Page 12 of 17 Report No.T100923305 Page 13 of 17 Report No.T100923305 Page 14 of 17 Power Adapter Photo (Model : SPA-K901) Report No.T100923305 Page 15 of 17 Report No.T100923305 Page 16 of 17 USB cable(1.56m) Report No.T100923305 Page 17 of 17 USB cable(36cm)

FCC IDV3J-JBE Report No.T100923305-RP1 Page 1 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC 47 CFR PART 15 SUBPART C AND ANSI C63.4:2003 TEST REPORT For Jawbone Model : JBE Issued for Aliph com 99 Rhode Island,3 rd Floor San Francisco, CA94134 Issued by Compliance Certification Services Inc. Tainan Lab. No. 8, Jiu Cheng Ling, Jiaokeng Village, Sinhua Township, Tainan Hsien 712, Taiwan R.O.C. TEL: +886-6-580-2201 FAX: +886-6-580-2202 http://www.ccsrf.com E-Mail : [email protected] Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. FCC IDV3J-JBE Report No.T100923305-RP1 Page 2 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 10/18/2010 Initial Issue All Page 111 Kate Shi FCC IDV3J-JBE Report No.T100923305-RP1 Page 3 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION ................................................................................ 4 2. EUT DESCRIPTION ..................................................................................................... 5 2.1 DESCRIPTION OF EUT & POWER ....................................................................... 5 3. DESCRIPTION OF TEST MODES ............................................................................... 6-7 4. TEST METHODOLOGY ............................................................................................... 8 5. FACILITIES AND ACCREDITATION ........................................................................... 8 5.1 FACILITIES ............................................................................................................ 8 5.2 ACCREDITATIONS................................................................................................ 8 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 9 6. SETUP OF EQUIPMENT UNDER TEST...................................................................... 10-11 7. FCC PART 15.247 REQUIREMENTS.......................................................................... 12 7.1 20dB BANDWIDTH FOR HOPPING...................................................................... 12-17 7.2 MAXIMUM PEAK OUTPUT POWER..................................................................... 18-23 7.3 HOPPING CHANNEL SEPARATION..................................................................... 24-29 7.4 NUMBER OF HOPPING FREQUENCY USED ...................................................... 30-32 7.5 DWELL TIME ON EACH CHANNEL ...................................................................... 33-47 7.6 CONDUCTED SPURIOUS EMISSION .................................................................. 48-55 7.7 RADIATED EMISSION........................................................................................... 56-99 7.8 CONDUCTED EMISSION ...................................................................................... 81-93 APPENDIX I SETUP PHOTOS ........................................................................................ 94-111 FCC IDV3J-JBE Report No.T100923305-RP1 Page 4 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. TEST REPORT CERTIFICATION Applicant Aliph com Address 99 Rhode Island,3 rd Floor San Francisco, CA94134 Equipment Under Test Jawbone Model JBE Tested Date September 23 ~ October 18, 2010 APPLICABLE STANDARD Standard Test Result FCC Part 15 Subpart C AND ANSI C63.4:2003 PASS WE HEREBY CERTIFY THAT: The above equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved by: Reviewed by: Jeter Wu Eric Yang Section Manager Senior Engineer FCC IDV3J-JBE Report No.T100923305-RP1 Page 5 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2. EUT DESCRIPTION 2.1 DESCRIPTION OF EUT & POWER Product Name Jawbone Model Number JBE Received Date September 23, 2010 Frequency Range 2402MHz to 2480MHz f = 2402 + nMHz, n = 0, .....78 Transmit Power 4.57 dBm (0.0029W) Channel Spacing 1MHz Channel Number 79 Air Data Rate GFSK (1Mbps), π/4-DQPSK (2Mbps), 8-DPSK (3Mbps) Type of Modulation Frequency Hopping Spread Spectrum Frequency Selection by software / firmware Transmitter Classification portable device Antenna Type PCB Antenna, Antenna Gain : -5.03dBi DC Power Cord Type Shielded USB cable 38cm / 1.56m (detachable) Power Source 3.7VDC (Battery Powered) 5.0VDC (From Notebook PC, Powered From Host Device & Power Adapter) Since the EUT is classed portable device, and the maximum peak power is 4.57 dBm (<13.6dBm), the MPE Evaluation is not required and no SAR consideration RF Exposure Evaluation applied. I/O Port Micro USB port × 1, Audio In port × 1 Power Adapter : No. Manufacturer Model No. Power Input Power Output 1 JAWBONE SPA-K901 100-240V , 50/60Hz , 0.1A 5.0V , 550mA Remark : 1. The sample selected for test was engineering sample that approximated to production product an…

Text truncated - open the document above for the full version.

FCC IDV3J-JBE Report No.T100923305-RP1 Page 94 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. APPENDIX I SETUP PHOTOS RADIATED EMISSION SETUP Below 1 GHz Mode 1 FCC IDV3J-JBE Report No.T100923305-RP1 Page 95 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC IDV3J-JBE Report No.T100923305-RP1 Page 96 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 2 FCC IDV3J-JBE Report No.T100923305-RP1 Page 97 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC IDV3J-JBE Report No.T100923305-RP1 Page 98 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 3-Charge FCC IDV3J-JBE Report No.T100923305-RP1 Page 99 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 3-Power Adapter FCC IDV3J-JBE Report No.T100923305-RP1 Page 100 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 4-Charge FCC IDV3J-JBE Report No.T100923305-RP1 Page 101 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC IDV3J-JBE Report No.T100923305-RP1 Page 102 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 4-Power Adapter FCC IDV3J-JBE Report No.T100923305-RP1 Page 103 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 5 FCC IDV3J-JBE Report No.T100923305-RP1 Page 104 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC IDV3J-JBE Report No.T100923305-RP1 Page 105 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Above 1 GHz FCC IDV3J-JBE Report No.T100923305-RP1 Page 106 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP FCC IDV3J-JBE Report No.T100923305-RP1 Page 107 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. CONDUCTED EMISSION SETUP Mode 3-Charge FCC IDV3J-JBE Report No.T100923305-RP1 Page 108 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 3-Powr Adapter FCC IDV3J-JBE Report No.T100923305-RP1 Page 109 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 4-Charge FCC IDV3J-JBE Report No.T100923305-RP1 Page 110 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 4-Powr Adapter FCC IDV3J-JBE Report No.T100923305-RP1 Page 111 of 111 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Mode 5