V4FPINGV002NETWORK VIDEO CAMERA

1 Y-CAM, BabyPing, Vodafone HomeView Network Video Camera User's Manual Model No: HomeView cam, BabyPing Video, Cloud cam Please read this manual carefully before you attempt to Install this product and retain it for your future reference. English 2 Contents MAIN FEATURES ............................................................................................................................................5 INSTALLATION ................................................................................................................................................8 NETWORK CAMERA INTERFACE & SETUP ............................................................................................... 13 Viewing the camera from your mobile phone ................................................................................................. 17 Network Camera Setting Interface ................................................................................................................. 18 Camera .......................................................................................................................................................... 20 Camera Setup ....................................................................................................................................... 20 Stream Setup ......................................................................................................................................... 21 How to use the URL stream list ............................................................................................................. 24 OSD Setup ............................................................................................................................................ 25 Night Vision Setup (IR IPCAM) .............................................................................................................. 26 Network .......................................................................................................................................................... 27 Wireless Setup ....................................................................................................................................... 27 TCP/IP Setup ......................................................................................................................................... 29 PPPoE Setup ......................................................................................................................................... 31 DDNS Setup .......................................................................................................................................... 32 UPNP Setup .......................................................................................................................................... 33 Alarm .............................................................................................................................................................. 36 Motion Detection .................................................................................................................................... 36 Schedule Setup ..................................................................................................................................... 38 Alarm Management ............................................................................................................................... 39 Periodic Sending .................................................................................................................................... 41 Buffer Management ............................................................................................................................... 43 Alarm Server .................................................................................................................................................. 44 FTP Server ............................................................................................................................................ 44 E-Mail Server ......................................................................................................................................... 45 HTTP Server .......................................................................................................................................... 46 Storage .......................................................................................................................................................... 47 Storage setup ........................................................................................................................................ 47 Record on Alarm .................................................................................................................................... 48 Snapshot on Alarm ................................................................................................................................ 49 Continuous Record ................................................................................................................................ 50 Snapshot at Interval ............................................................................................................................... 51 FTP Sending .......................................................................................................................................... 52 Browse Storage ..................................................................................................................................... 53 Format SD Card ..................................................................................................................................... 54 Tools ............................................................................................................................................................... 55 System Identity ......................................…

Text truncated - open the document above for the full version.

FCC INFORMATION This equipment complies with CFR 47, Part 15.19 of the FCC rules. Operation of the equipment is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. THIS DEVICE MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. REGULATORY INFORMATION / DISCLAIMERS Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. MPE Statement (Safety Information) Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. SAFETY INFORMATION In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Title SizeDocument NumberRev Date:Sheet of IP228 IP228 Functional Block Diagram 39Tuesday, December 20, 2011 Title SizeDocument NumberRev Date:Sheetof IP228 IP228 Functional Block Diagram 39Tuesday, December 20, 2011 Title SizeDocument NumberRev Date:Sheetof IP228 IP228 Functional Block Diagram 39Tuesday, December 20, 2011 ORANTEK Co.,Ltd MAC Ethernet AMR926JS DC-DC Convertor USB2.0 Interface 22.1184MHz 2.4G Antenna 30MHZ 25MHz The Clock of CCIR656 is 24MHz 24MHZ The Clock of SDRAM is 133MHz 802.11b/g/n Wireless Channels Power Adapter RT8201 TX/RX MII CMOS Sensor CCIR656 I2C Crystal Resonator For ARM Audio CODEC I2C I2S POWER Power Voltage Detector NORFLASH EMIF Transformer TX/RX Crystal Resonator For USB PHY WLAN Module USB2.0 Oscillator IR LED Board SDRAM SDRAM RJ45 RJ45 GM8120 SDRAM MII I2C I2S CCIR655 USB2.0 EMIF GPIO Oscillator For PHY UnRegistered

H it E r&^ (wrrl) €^ FF1A Fl SinTek Laboratory Co., Ltd. TEL: 11755-27608353; 27604866; 27 607 544 FAX: 0755-27608359 Test Lab Attestation Letter l-his, attestaticn is to c:onfirrn that the below listed device was tested at our Ter;t Facilities located at: Test Lab Name: Test Lab Address: -l'esl: [-ab Re1;is'tration Nlumbelr: Date, of Test: Test Report Number: r\pplir;ant Namir: FCC ID: Nane of Engineer(s) Perfr:,rming Test: Company Name of Engineer(s) Perfrrrming Test: SinTek Laboratory Co., Ltd. No.7, Xinshidai Industrial, Guantian Village,,Shiyan To'wn, Bao'an District' Shenzhen, Guangdong, 5 I 8 108 China 963441 March 6-March 30,2012 K5z.201201 1301J Y-carm Solut,ons Ltd. V4FPINGVOO2 Eric Guo Ke Mei Ou Laboratory Co., Ltd. *llust be Managrement Position* and *Comp,311y Stamp* TEST LABORATORY: Siignaturr:: of Authorized Flepresental:ive of the Test Laboratory: Full contact Name: Saron Position/Title: Manager Address : j1# ! | | iji' '.|X6 H ffiE' t I ].ffi #i r.l.{ t r v. lr

EUT top view EUT bottom view

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper label. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/Proposed FCC ID Label Location FCC ID: V4FPINGV002

EUT inside whole view Main & RF board component side Main & RF board solder side

IP228 Operational Description The IP228 is a Network camera provides the ability to view the cameras monitored through PC or mobile phone as a live video stream, it supports the telecommunications standard of 3GPP streaming format. All 3G enabled mobile devices and most 2G phones that support the streaming standard of 3GPP are compatible. The U2 on OT207OV77252VA board is a CMOS image sensor, it captures the image data and the data is send to U on OTIPCAMCORE1VD board in ITU656 format. The U3 on OTIP228GM81611VA board is an ARM MCU including a H264/MPEG4 CODEC, it implements all the control and TCP/IP protocol in the same time it will encode the image data come from U4. While the encoding is complete, the encoding data will be sent out in two ways. While the RJ45 is pluged, IP228 will send the compress image data by the CAT5 wire. While the RJ45 is unplugging, IP228 will send the compress image data by the WLAN Module using Wireless way. The U7 on OTIP228GM81611VA board and its periphery is use to Ethernet PHY, the U3 include a MAC, so U3 sent compress image data to Ethernet by U7. The camera allows live the H264/MPEG-4 and Motion JPEG streams simultaneously. The camera features H264/MPEG4 compression which compresses the video to make transmission faster and more efficient. The H264/MPEG4 and MJPEG image can be transmitted at 30 frames per second. Because of its high-compression ratios, users can monitor high-quality moving images with low delay even at low bandwidths. The image size can be selected according to the network environment and application requirements. Image size can be selected from three modes: 640 x 480, 320 x 240, and 160 x 120.

7. RF Exposure Requirements 7. 1 Test Equipment Please refer to Section 10 this report. 7. 2 Limit According to FCC 15.247(i), Systems operating under provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commissions guidelines. FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b)(1) of this chapter. 7. 3 Test Result Product : Network Camera Baby Monitor Test Mode : IEEE 802.11b/g/n Test Item : RF Exposure Temperature : 25 °C Test Voltage : DC 12V (Power by DC Power Supply) Humidity : 56%RH Test Result : PASS Evaluation of RF Exposure Compliance Requirements MPE Prediction of MPE according to equation from page 19 of OET Bulletin 65, Edition 97-01 RF Exposure Requirements Compliance with FCC Rules S=PG/4∏R2 Where: S=Power density P=Power input to antenna G=Power gain of the antenna relative to an isotropic radiator R=Distance to the center of radiation of the antenna Maximum output power at antenna input terminal: -22.00 dBm = 0.0063 mW (802.11b/g, 2412MHz) -24.08 dBm = 0.0039 mW (Draft n, 2412MHz)(20MHz) Prediction distance: 20 cm Antenna gain : 2.0 dBi MPE limit for uncontrolled exposure at prediction frequency: 10 W/m 2 Power density at 20 cm: 802.11b/g: 0.000002 mW/m 2 Draft n : 0.000001 mW/m 2 MPE Evaluation Mode Frequency (MHz) OutputPower (dBm) RF Power (mW) Antenna Gain (dBi) Distance (cm) MPE (mW/cm2) Limit MPE (mW/cm2) 802.11b 2412 -25.02 0.0031 2.00 20.0 0.00000099 1.0 2437 -31.01 0.0008 2.00 20.0 0.00000025 1.0 2462 -28.36 0.0015 2.00 20.0 0.00000046 1.0 Mode Frequency (MHz) OutputPower (dBm) RF Power (mW) Antenna Gain (dBi) Distance (cm) MPE (mW/cm2) Limit MPE (mW/cm2) 802.11g 2412 -22.00 0.0063 2.00 20.0 0.00000199 1.0 2437 -27.14 0.0019 2.00 20.0 0.00000061 1.0 2462 -22.51 0.0056 2.00 20.0 0.00000177 1.0 Mode Frequency (MHz) OutputPower (dBm) RF Power (mW) Antenna Gain (dBi) Distance (cm) MPE (mW/cm2) Limit MPE (mW/cm2) Draft n 20MHz Ant.0 2412 -24.08 0.0039 2.00 20.0 0.00000123 1.0 2437 -31.51 0.0007 2.00 20.0 0.00000022 1.0 2462 -25.48 0.0028 2.00 20.0 0.00000089 1.0 Mode Frequency (MHz) OutputPower (dBm) RF Power (mW) Antenna Gain (dBi) Distance (cm) MPE (mW/cm2) Limit MPE (mW/cm2) Draft n 40MHz Ant.0 2412 -34.37 0.0004 2.00 20.0 0.00000012 1.0 2437 -32.20 0.0006 2.00 20.0 0.00000019 1.0 2452 -32.59 0.0006 2.00 20.0 0.00000017 1.0

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA Note 110Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA Note 110Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA Note 110Thursday, June 30, 2011 Data code/ Version Modification -First release1.0 Change log: UnRegistered 5 5 4 4 3 3 2 2 1 1 DD CC BB AA DDR_DQS0 DDR_DQS1 DDR_CKE DDR_CLK DDR_CLKn DDR_WEn DDR_CSn DDR_CASn DDR_RASn DDR_A0 DDR_A1 DDR_A2 DDR_A3 DDR_A4 DDR_A5 DDR_A6 DDR_A7 DDR_A8 DDR_A9 DDR_A10 DDR_A11 DDR_A12 DDR_BA0 DDR_BA1 DDR_DQM0 DDR_DQM1 DDR_DQ0 DDR_DQ1 DDR_DQ2 DDR_DQ3 DDR_DQ4 DDR_DQ5 DDR_DQ6 DDR_DQ7 DDR_DQ8 DDR_DQ9 DDR_DQ10 DDR_DQ11 DDR_DQ12 DDR_DQ13 DDR_DQ14 DDR_DQ15 DDR_DQ[0..15] DDR_BA[0..1] DDR_A[0..12] DDR_CKE DDR_CLK DDR_CLKn DDR_WEn DDR_CSn DDR_CASn DDR_RASn DDR_DQS[0..1] DDR_DQM[0..1] 1V25 1V25 DDR_DQ[0..15] DDR_BA[0..1] DDR_A[0..12] DDR_CLK DDR_CLKn DDR_CKE DDR_CSn DDR_RASn DDR_CASn DDR_WEn DDR_DQS[0..1] DDR_DQM[0..1] Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161A_DDR 19Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161A_DDR 19Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161A_DDR 19Thursday, June 30, 2011 By pass cap. nearby BGA R1,T7 pin C47 0.1uF C47 0.1uF C44 0.1uF C44 0.1uF C46 1uF C46 1uF C45 1uF C45 1uF DDRI Controller U3A GM8161_BGA256 DDRI Controller U3A GM8161_BGA256 DDR_DQ0 T14 DDR_DQ1 R11 DDR_DQ2 T12 DDR_DQ3 P10 DDR_DQ4 P9 DDR_DQ5 T13 DDR_DQ6 P8 DDR_DQ7 R9 DDR_DQ8 T9 DDR_DQ9 R10 DDR_DQ10 R8 DDR_DQ11 T8 DDR_DQ12 P7 DDR_DQ13 T6 DDR_DQ14 R6 DDR_DQ15 R7 DDR_BA0 R3 DDR_BA1 L3 DDR_A0 L1 DDR_A1 K3 DDR_A2 L2 DDR_A3 M1 DDR_A4 N1 DDR_A5 M2 DDR_A6 K4 DDR_A7 P1 DDR_A8 N2 DDR_A9 M3 DDR_A10 T1 DDR_A11 P2 DDR_A12 L4 DDR_DQS0 P5 DDR_DQS1 P6 DDR_VREF1 R1 DDR_VREF2 T7 DDR_CLK T2 DDR_CLKn T3 DDR_CSn N3 DDR_RASn M4 DDR_CASn T4 DDR_WEn R2 DDR_DQM0 R4 DDR_DQM1 P4 DDR_CKE P3 UnRegistered 5 5 4 4 3 3 2 2 1 1 DD CC BB AA SMC_ADDR0 SMC_ADDR1 SMC_ADDR2 SMC_ADDR3 SMC_ADDR4 SMC_ADDR5 SMC_ADDR6 SMC_ADDR7 SMC_ADDR8 SMC_ADDR9 SMC_ADDR10 SMC_ADDR11 SMC_ADDR12 SMC_ADDR13 SMC_ADDR14 SMC_ADDR15 SMC_ADDR16 SMC_ADDR17 SMC_ADDR18 SMC_ADDR19 SMC_ADDR20 SMC_ADDR21 SMC_ADDR22 SMC_ADDR23 SMC_DQ0 SMC_DQ1 SMC_DQ2 SMC_DQ3 SMC_DQ4 SMC_DQ5 SMC_DQ6 SMC_DQ7 SMC_WEn SMC_OEn SMC_CSn0 SMC_DQ[0..7] SMC_ADDR[0..23] SMC_CSn0 SMC_WEn SMC_OEn SMC_DQ[0..7] SMC_ADDR[0..23] SMC_CSn0 SMC_OEn SMC_WEn Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161B_SMC 29Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161B_SMC 29Thursday, June 30, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161B_SMC 29Thursday, June 30, 2011 SMC U3B GM8161_BGA256 SMC U3B GM8161_BGA256 SMC_ADDR0 B4 SMC_ADDR1 C4 SMC_ADDR2 A3 SMC_ADDR3 D4 SMC_ADDR4 B3 SMC_ADDR5 A2 SMC_ADDR6 E4 SMC_ADDR7 A1 SMC_ADDR8 C3 SMC_ADDR9 B2 SMC_ADDR10 D3 SMC_ADDR11 C2 SMC_ADDR12 B1 SMC_ADDR13 C1 SMC_ADDR14 E3 SMC_ADDR15 D2 SMC_ADDR16 F4 SMC_ADDR17 D1 SMC_ADDR18 E1 SMC_ADDR19 E2 SMC_ADDR20 F3 SMC_ADDR21 F2 SMC_ADDR22 G1 SMC_ADDR23 F1 SMC_DATA0 B6 SMC_DATA1 A6 SMC_DATA2 C6 SMC_DATA3 D6 SMC_DATA4 A5 SMC_DATA5 B5 SMC_DATA6 C5 SMC_DATA7 D5 SMC_CSn0 A7 SMC_OEn B7 SMC_WEn A4 UnRegistered 5 5 4 4 3 3 2 2 1 1 DD CC BB AA SPI_FS I2S_RXD I2S_BCLK_A I2S_FS I2S_MCLK_A SPI_TXD I2C_SDA I2C_SCL GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 SD_CLK SD_DAT0 SD_DAT1 SD_DAT2 SD_DAT3 SD_CMD_RSP SD_CDn S1_TXD S1_RXD ICE_TCK ICE_TDI ICE_DBGREQ ICE_TMS ICE_TRSTn ICE_TDO ICE_DBGACK I2S_BCLK_A I2S_MCLK_AI2S_MCLK I2S_BCLK GPIO3 GPIO4 I2C_SCL I2C_SDA I2C_SCL I2C_SDA I2S_MCLK I2S_FS I2S_RXD I2S_BCLK ICE_DBGACK ICE_TCK ICE_TDO ICE_TDI ICE_TMS ICE_TRSTn ICE_DBGREQ GPIO3GPIO4 S1_RXD S1_TXD GPIO0 GPIO1 GPIO2 SPI_TXD SPI_FS SD_CDn SD_DAT[0..3] SD_CLK SD_CMD_RSP GPIO4 GPIO3 I2C_SDA I2C_SCL ICE_TMS ICE_TDI SPI_RXD SPI_RXD SPI_BCLK SPI_BCLK 3V33V3 3V3 3V3 3V3 3V3 3V3 I2C_SCL I2C_SDA I2S_RXD I2S_FS I2S_BCLK I2S_MCLK S1_TXD S1_RXD GPIO0 GPIO1 GPIO2 SPI_TXD SPI_FS SD_CLK SD_CDn SD_DAT[0..3] SD_CMD_RSP ICE_TMS ICE_TDI SPI_RXD SPI_BCLK Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161C_IO_I2S_SD_ICE 29Monday, July 04, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161C_IO_I2S_SD_ICE 29Monday, July 04, 2011 Title SizeDocument NumberRev Date:Sheetof OTIP228GM81611VA GM8161C_IO_I2S_SD_ICE 29Monday, July 04, 2011 G15 X_SPI_RXD X_GPIOB[0] E15 X_SPI_TXD X_GPIOB[1] E14 X_SPI_SCLK X_GPIOB[2] D15 X_SPI_FS X_GPIOB[3] R14 X_UART2_RTSn X_GPIO[24] H3 X_TCK X_GPIO[12] G2 X_TMS X_GPIO[13] G3 X_TDO X_GPIO[14] G4 X_TDI X_GPIO[15] H2 X_DBGACK X_GPIO[17] H4 X_EDBGRQ X_GPIO[18] JTAG调试口，这里采用测试点的方式引出，不用考虑其摆放顺序， 可以分散布局，也可以排成一排，关键是看怎样方便走线。 R72 10K R72 10K C28 0.1uF C28 0.1uF T4T4 GPIO I2C UART I2S/AC97 FA626 ICE SD I2S/SPI U3C GM8161_BGA256 GPIO I2C UART I2S/AC97 FA626 ICE SD I2S/SPI U3C GM8161_BGA256 I2S_MCLK N12 I2S_BCLK P14 I2S_FS R16 I2S_TXD P16 I2S_RXD P15 ICE_TRSTn J2 ICE_TDI G4 ICE_TMS G2 ICE_TCK H3 ICE_TDO G3 ICE_DBGREQ H4 ICE_DBGACK H2 GPIO0 R12 GPIO1 P11 GPIO2 T15 GPIO3 R13 GPIO4 P12 SD_W P A10 SD_CDn A9 SD_CLK D8 SD_CMD_RSP B9 SD_DAT0 C8 SD_DAT1 B8 SD_DAT2 A8 SD_DAT3 D7 UART1_SIN T16 UART1_SOUT N11 UART2_SIN P13 UART2_SOUT R15 UART2_RTSN R14 SPI_BCLK E14 SPI_FS D15 SPI_TXD E15 SPI_RXD G15 I2C_SCL F15 I2C_SDA E16 T2T2 R6 4.7K R6 4.7K T14T14 U14 SN74LVC2G34DCK U14 SN74LVC2G34DCK 2Y 4 GND 2 1A 1 VCC 5 2A 3 1Y 6 R2822RR2822R T7T7 T5T5 R73 10K R73 10K R714.7KR714.7K T12T12 U6AT24C01A Atmel U6AT24C01A Atmel A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 W P 7 VCC 8 R3022RR3022R T3T3 U9OT825U9OT825 A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 W P 7 VCC 8 R4 4.7K R4 4.7K T6T6 C48 0.1uF C48 0.1uF T1T1 C116 0.1uF C116 0.1uF UnRegistered 5 5 4 4 3 3 2 2 1 1 DD CC BB AA V_DI0 U_XSCI U_XSCO CRYI_12M CRYO_12M V_DI1 V_DI2 V_DI3 GND V_DI4 GND_USB V_DI5 GND_USB V_DI6 V_DI7 GND GND V2_DI1 V2_DI0 V2_DI2 V2_DI4 V2_DI5 V2_DI7 V2_DI3 V2_DI6 GND GND GND_USB TESTEN VCC_OSC VCC_DDLL VCC_PLL1 VCC_USB VCC_PLL3 VCC_USB VCC_USB U_ID…

Text truncated - open the document above for the full version.

The test report consists 49 pages in total. It may be duplicated completely for legal use with the allowance of the applicant. It shall not be reproduced except in full, without the written approval of Ke Mei Ou Laboratory Corporation. The test result in the report only applied to the tested sample. FCC TEST REPORT Under FCC 15 Subpart C, Paragraph 15.247 Operating in 2400 ~ 2483.5 MHz Band Prepared For : Y-cam Solutions Ltd. 3 Dee Road, Richmond, Surrey TW9 2JN, United Kingdom FCC ID: V4FPINGV002 EUT: Network Video Camera Model: HomeView Cam March 30, 2012 Issue Date: Original Report Report Type: Test Engineer: Eric Guo Review By: Apollo Liu / Manager Ke Mei Ou Laboratory Co., Ltd. 7A, Jiaxiangge, Jiahuixincheng, No.3027, Shennan Rd., Futian, Shenzhen, Guangdong, P.R.China. Zip Code: 518033 Tel: + 86 755 83642690 Fax: + 86 755 83297077 www.kmolab.com Y-cam Solutions Ltd. FCC ID: V4FPINGV002 KMO FCC ID Report Report #: KSZ2012011301J Page 2 of 49 TABLE OF CONTENTS 1. General Information............................................................................................................................................................ 3 1. 1 Notes ............................................................................................................................................................................... 3 1. 2 Testing Laboratory .......................................................................................................................................................... 3 1. 3 Details of Applicant ........................................................................................................................................................ 3 1. 4 Application Details ......................................................................................................................................................... 3 1. 5 Test Item ......................................................................................................................................................................... 3 1. 6 Test Standards ................................................................................................................................................................. 3 2. Technical Test ....................................................................................................................................................................... 4 2. 1 Summary of Test Results ................................................................................................................................................ 4 2. 2 Antenna Requirement ..................................................................................................................................................... 4 3. EUT Modifications .............................................................................................................................................................. 4 4. Conducted Power Line Test ................................................................................................................................................ 5 4. 1 Test Equipment ............................................................................................................................................................... 5 4. 2 Test Procedure ................................................................................................................................................................ 5 4. 3 Test Setup ....................................................................................................................................................................... 5 4. 4 Configuration of the EUT ............................................................................................................................................... 6 4. 5 EUT Operating Condition ............................................................................................................................................... 8 4. 6 Conducted Power Line Emission Limits ........................................................................................................................ 8 4. 7 Conducted Power Line Test Result ................................................................................................................................. 9 5. FCC Part 15.247 Requirements for 802.11b/g/n Systems ............................................................................................... 11 5. 1 Test Equipment ............................................................................................................................................................. 11 5. 2 Test Procedure .............................................................................................................................................................. 11 5. 3 Test Setup ..................................................................................................................................................................... 11 5. 4 Configuration of the EUT ............................................................................................................................................. 11 5. 5 EUT Operating Condition ............................................................................................................................................. 11 5. 6 Limit ............................................................................................................................................................................. 11 5. 7 Test Result .................................................................................................................................................................... 12 6. Transmitter Spurious Radiated Emission at 3 Meters .................................................................................................... 33 6. 1 Test Equipmen…

Text truncated - open the document above for the full version.

Conducted emission test view Radiated emission test view