V65C5155A1CDMA Mobile Phone with WLAN & Bluetooth

Basics Guide for the KYOCERA Rise Get Started2 Important Safety Information 20 Manufacturer’s Warranty 30 End User License Agreement 33 Important Message From Virgin Mobile 37 © 2012 Kyocera Corporation. All rights reserved. The “Virgin” name and the Virgin signature logo are registered trademarks of Virgin Enterprises Limited and are used under license. All other trademarks are the property of their respective owners. KYOCERA is a registered trademark of Kyocera Corporation. Android, Google Play Store, Google Maps, Gmail, Google Talk are trademarks of Google, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kyocera Corporation is under license. Other trademarks and trade names are those of their respective owners. 2Get Started ♦Your KYOCERA Rise (page 2) ♦Get Your Device Ready (page 3) ♦Activate Your Device (page 4) ♦Account Management (page 5) ♦Android™ Basics (page 6) ♦Use Your Device (page 9) ♦Customer Support (page 18) ♦Notes (page 19) This section introduces you to the basics of getting started with Virgin Mobile and your KYOCERA Rise. Visit www.virginmobileusa.com for the complete User Guide and additional information. Get Started Your KYOCERA Rise Earpiece LED Indicator Home Key Display Screen Back Key Recent Apps Key Menu Key Microphone Camera Lens Charger/Accessory Jack Volume Button Headphone Jack Power Button Speaker Internal Antennas Camera Flash Self Portrait Mirror Proximity Sensor/ Light Sensor microSD Card Slot (internal) Camera Button Get Started3 Find out what you need to do before you use your device the first time. Install the Battery 1. Hook your thumb- or fingernail into the slot at the left side of the battery compartment cover () and gently lift up to remove the cover (). 2. Insert the battery, contacts end first, and gently press into place (). 3. Make sure the locking tabs of the cover are seated and then gently press the cover (). Charge the Battery 1. Plug the smaller end of the micro-USB cable into the device’s charger/accessory jack. 2. Plug the other end of the USB cable into the charger, and then plug the charger into an electrical outlet. Turn the Device On Press and hold the Power button to turn your device on. Get Your Device Ready Power Button 4Get Started Activate Your Device 1. Turn on your new device. 2. Touch the Activate icon on the home screen. - or - Touch , and then touch the Activate icon . 3. Follow the onscreen prompts to complete the activation process. Tip:Do not press the Power button while the device is being activated. Pressing the Power button cancels the activation process. Turn the Screen On and Off ●To quickly turn the display screen off, press the Power button on top of the device. ●To turn the screen on and display the unlock screen, press the Power button. Unlock the Screen Touch () and drag it in any direction to unlock the screen. Turn the Device Off ●Press and hold the Power button on top of the device and then touch Power off to turn the device off. Activate Your Device Get Started5 Manage Your Account From Your Device Dial *86 on your device or just touch My Account on the home screen to access your Account, where you can do any of the following things: ●Check your minutes ●Add money (Top-Up) ●Change plans... and a lot more From Your Computer Log in with your phone number and Account PIN at virginmobileusa.com where you can do everything above, and more. Top-Up Your Account Buy Top-Up cards at thousands of retailers. Or, make it real easy by registering your credit/debit card or PayPal account. Auto Top-Up Auto Top-Up is the easiest way to keep your service working. Set it to Top-Up your account once a month so you can keep emailing, IMing, Tweeting with Twitter, surfing, and talking. No interruptions, no sweat. Activate Auto Top-Up and adjust your settings anytime by logging at virginmobileusa.com . One-time Top-Ups From Your Device: Dial *729 on your device or just touch My Account on the home screen. From Your Computer: If you don’t want to set Auto Top-Up, you can still log in at virginmobileusa.com whenever you need a quick Top-Up. Account Management 6Get Started Learn some basics about how to move around on your device, use the Home screen, and enter text. If you’re familiar with Android devices, you can probably skip these pages (although a refresher course never hurt anyone). Move Around Your Device’s Menus and Screens Using Gestures Your device’s touchscreen lets you control everything through various types of touches, or gestures. Touch: When you want to press onscreen buttons, select items such as application and settings icons, or type, simply touch the screen with your finger. A light touch works best. Touch and hold: To open the available options for an item (for example, options for a contact), simply touch and hold the item. Drag: Touch and hold your finger before you start to move it. Do not release your finger until you have reached the target position. Slide or Flick: To slide, quickly move your finger vertically or horizontally across the screen. To flick, move your finger in lighter, quicker strokes than sliding. This finger gesture is always used in a vertical motion, such as when scrolling through contacts or a message list. Pinch and Spread: Pinch the screen using your thumb and forefinger to zoom out or spread the screen to zoom in when viewing a picture or a Web page. (Move fingers inward to zoom out and outward to zoom in.) Rotate: For most screens, you can automatically change the screen orientation from portrait to landscape by turning the device sideways. When entering text, you can turn the device sideways to bring up a bigger keyboard. Note:The Auto-rotate screen check box in Home > Menu > System settings > Display needs to be selected for the screen orientation to automatically change. Android™ Basics Get Started7 Home Screen Press Home to display your Home screen. Notifications Panel When you see a notification icon on the left side …

Text truncated - open the document above for the full version.

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 1 of 2 Date: 05/11/2012 Federal Communications Commission c/o Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538 To whom it may concern: We, the undersigned, hereby authorize the Comptest Services LLC and hereafter referred to as Comptest, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Comptest on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Comptest as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 2 of 2 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue San Diego, San Diego, CA 92123

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential Date: 05/11/2012 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: V65C5155A1 To Whom It May Concern: In accordance with §0.459 of CFR 47, KYOCERA Corporation requests confidentiality for the following items 1. Block Diagram 2. Parts List 3. Adjustment Procedure and Schematic Diagrams 4. Technical Description These items contain detailed system and equipment description and related information about the product which KYOCERA Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, KYOCERA Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue San Diego, San Diego, CA 92123

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc.. Proprietary/Confidential Date: 05/11/2012 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Short-Term Confidentiality FCC ID: V65C5155A1 To Whom It May Concern: In accordance with §0.457 and 0.459 of CFR 47, KYOCERA Corporation requests short-term confidentiality (135 days) for the following items 1. Test Setup Photos 2. External and Internal Photos 3. User’s Manual These items contain detailed system and equipment description and related information about the product which KYOCERA Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, KYOCERA Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue San Diego, San Diego, CA 92123

Date: 7/16/10 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Tina To, Account Representative CompTest Services, LLC

Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-7-0412-R0 © 2012 Comptest Services LLC Page 1 of 3 External Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 7: EXTERNAL PHOTOS Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-7-0412-R0 © 2012 Comptest Services LLC Page 2 of 3 External Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-7-0412-R0 © 2012 Comptest Services LLC Page 3 of 3 External Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

C5155A1 Rating Label

Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 1 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. 1 EXHIBIT 8: INTERNAL PHOTOS CDMA Antenna Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 2 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. WiFi/Bluetooth Antenna Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 3 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 4 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 5 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 6 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 7 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-8-0412-R0 © 2012 Comptest Services LLC Page 8 of 8 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-9-0412-R1 © 2012 Comptest Services LLC Page 1 of 31 SAR Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Specific Absorption Rate (SAR) FCC 47 CFR Part 2 Test Report For Kyocera Corporation c/o Kyocera Communication, Inc. Product: CDMA Mobile Phone Model: C5155 A1 Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-9-0412-R1 © 2012 Comptest Services LLC Page 2 of 31 SAR Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. TABLE OF CONTENTS 1 SUMMARY OF TESTING ................................................................................................................. 4 2 EQUIPMENT UNDER TEST INFORMATION ................................................................................... 5 3 ACCESSORIES ................................................................................................................................ 5 3.1 BODY WORN ACCESSORIES ........................................................................................................ 5 3.2 BATTERIES ................................................................................................................................. 5 4 TEST CONDITIONS ......................................................................................................................... 6 4.1 TEST FACILITIES ......................................................................................................................... 6 4.2 AMBIENT CONDITIONS ................................................................................................................. 6 4.3 RF CHARACTERISTICS OF THE TEST SITE ...................................................................................... 6 4.4 TEST SIGNAL, FREQUENCIES AND OUTPUT POWER ....................................................................... 7 4.5 DEVICE TEST CONDITIONS........................................................................................................... 9 4.6 MULTIPLE TRANSMITTERS AND ANTENNAS SAR EVALUATIONS..................................................... 10 4.7 ROUTER SAR EVALUATIONS ...................................................................................................... 13 4.8 HAND SAR EVALUATIONS .......................................................................................................... 13 4.9 SAR TESTS IN MOUTH AND JAW REGIONS OF THE SAM PHANTOM .............................................. 14 5 DESCRIPTION OF THE TEST EQUIPMENT ................................................................................. 15 5.1 DOSIMETRIC SYSTEM ................................................................................................................ 15 5.2 ADDITIONAL EQUIPMENT NEEDED IN VALIDATION.......................................................................... 17 5.3 TISSUE STIMULANTS ................................................................................................................. 17 5.4 PHANTOMS DESCRIPTION .......................................................................................................... 18 5.5 ISOTROPIC E-FIELD PROBE ....................................................................................................... 19 6 SYSTEM VALIDATION .................................................................................................................. 20 7 DESCRIPTION OF THE TEST PROCEDURE ................................................................................ 22 7.1 TEST POSITIONS ....................................................................................................................... 22 7.2 SCAN PROCEDURES .................................................................................................................. 24 7.3 SAR AVERAGING METHODS ...................................................................................................... 24 8 MEASUREMENT UNCERTAINTY.................................................................................................. 25 9 TEST DATA .................................................................................................................................... 26 9.2 SIMULTANEOUS SAR EVALUATION ............................................................................................. 30 10 LIST OF APPENDIX ....................................................................................................................... 31 Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-9-0412-R1 © 2012 Comptest Services LLC Page 3 of 31 SAR Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. ATTESTATION The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test equipment used was suitable for the tests performed and within manufacturer’s published specifications and operating parameters. The test methods were consistent with the methods described in the relevant standards. Product: CDMA Mobile Phone with Bluetooth and WLAN Model #: C5155 A1 FCC ID: V65C5155A1 Tested in accordance with: FCC §2.1093/OET-65 Supplement C IEEE P2528/D1.2 – 2003 FCC KDB 248227 D01 v01r02 FCC KDB 648474 D01 v01r05 FCC KDB 941225 v2 Test Requested by: KYOCERA Corporation C/o KYOCERA Communication Inc 9520 Towne Centre Drive San Diego, CA 92123 United States Test performed by: CompTest Services LLC Date of Test: March 27 - April 9, 2012 Responsible Engineer Reviewed and approved by: Benjamin Nguyen Benjamin Nguyen Tammy To Test Engineer Quality Manager Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155A1-9-0412-R1 © 2012 Comptest Services LLC Page 4 of 31 SAR Report This report shall not be reproduced except in full, without the…

Text truncated - open the document above for the full version.

Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 1 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 APPENDIX A: SAR VALIDATION PLOTS Validation for HEAD Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 2 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 04/05/2012 1900Mhz Validation @ 20dBm Probe 3036, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.43 mho/m; ε r = 38.4; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.06, 5.06, 5.06), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8  1 deg C, Liquid T = 22.0  1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.92 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.3 V/m; Power Drift = 0.039 dB Peak SAR (extrapolated) = 7.73 W/kg SAR(1 g) = 4.14 mW/g; SAR(10 g) = 2.13 mW/g Maximum value of SAR (measured) = 4.62 mW/g 0 dB = 4.92mW/g Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 3 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 04/06/2012 1900Mhz Validation @ 20dBm Probe 3036, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.43 mho/m; ε r = 38.6; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.06, 5.06, 5.06), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8  1 deg C, Liquid T = 22.0  1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.73 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.6 V/m; Power Drift = 0.025 dB Peak SAR (extrapolated) = 7.40 W/kg SAR(1 g) = 3.97 mW/g; SAR(10 g) = 2.05 mW/g Maximum value of SAR (measured) = 4.47 mW/g 0 dB = 4.47mW/g Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 4 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 5 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 04/09/2012 2450MHz Validation, Probe #3078, DAE #530, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 Medium: HSL2450,Medium parameters used: f = 2450 MHz; σ = 1.83 mho/m; ε r = 37.9; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.36, 4.36, 4.36), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8  1 deg C, Liquid T = 22.0  1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 6.95 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.4 V/m; Power Drift = -0.171 dB Peak SAR (extrapolated) = 12.1 W/kg SAR(1 g) = 5.47 mW/g; SAR(10 g) = 2.45 mW/g Maximum value of SAR (measured) = 6.18 mW/g 0 dB = 6.95mW/g Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 6 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 7 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Validation for BODY Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT-C5155-9A-0412-R0 © 2012 Comptest Services LLC Page 8 of 13 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/27/2012 1900Mhz Validation (Muscle) @ 20dBm Probe 3036, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.53 mho/m; ε r = 51.8; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8  1 deg C, Liquid T = 22.0  1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (in…

Text truncated - open the document above for the full version.

Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT- C5155- 9B1 -0312-R0 © 2012 Comptest Services LLC Page 1 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 Appendix B1: SAR DISTRIBUTION PLOTS (HEAD) PCS Applicant: Kyocera FCC ID: V65C5155A1 Report #: CT- C5155- 9B1 -0312-R0 © 2012 Comptest Services LLC Page 2 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 04/05/2012 FCC C5155 CDMA-1900 Left, Ch. 25, Left Cheek, Closed Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.43 …

Text truncated - open the document above for the full version.