V65C6522GSM/WCDMA/LTE Phone with Bluetooth/WLAN

Kyocera Corporation 9520 Towne Centre Drive San Diego California United States 92121 Date: August 13, 2013 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Re: HAC Attestation -­‐ FCC ID: V65C6522 To whom it may concern: We hereby declare that the MIF values detailed below are based on worst case operating modes for all air interfaces for which the HAC rating is provided based on the current methodology for determining MIF values. Reference Test report Number(s): HCTA1307FM02 SPEAG test files UID Communication System Name MIF (dB) 10021-­‐CAA GSM-­‐FDD (TDMA, GMSK) 3.6 10011-­‐CAA UMTS-­‐FDD (WCDMA) -­‐27.23 Sincerely, ____________________ Douglas L. Dunn Director of Regulatory Engineering Kyocera Communications, Inc.

Kyocera Corporation 9520 Towne Centre Drive San Diego California United States 92121 Date: August 15, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FFCCCC IIDD:: VV6655CC66552222 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, K Kyyoocceerraa CCoorrppoorraattiioonn hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 1 18800 days after the grant as outlined in Public Notice DA 04- 1705. This provision will give K Kyyoocceerraa CCoorrppoorraattiioonn temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: CCOONNFFIIDDEENNTTIIAALL AANNDD SSHHOORRTT--TTEERRMM CCOONNFFIIDDEENNTTIIAALL LLIISSTT EExxhhiibbiitt DDeessccrriippttiioonn CCOONNFFIIDDEENNTTIIAALL 1 Block Diagram 2 Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SSHHOORRTT--TTEERRMM CCOONNFFIIDDEENNTTIIAALL 5 External Photos 6 Internal Photos 7 Test -Setup Photos 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, ------------------------------------------- Douglas L. Dunn Director of Regulatory Engineering Kyocera Communications, Inc.

Kyocera Corporation 9520 Towne Centre Drive San Diego California United States 92121 Date: August 15, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. SunHee Kim of HCT Co., Ltd and hereafter referred to as HCT, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. SunHee Kim of HCT Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing HCT as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Douglas L. Dunn Director of Regulatory Engineering Kyocera Communications, Inc.

FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 7 EXTERNAL PHOTOGRAPHS FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 7 ■ EXTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 7 ■ EXTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 7 ■ EXTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 7 ■ EXTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 7 ■ EXTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 7 ■ EXTERNAL PHOTO

52.6 44.0 Device Label for V65C6522 Note : The FCC Label will be visible at the time of purchase.

FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 20 INTERNAL PHOTOGRAPHS FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 20 ■ Main Antenna INTERNAL PHOTO Main Antenna FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 20 ■ BT&WLAN Antenna_INTERNAL PHOTO Main Diversity RX Antenna FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 20 ■ INTERNAL PHOTO BT/WLAN Antenna FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ８ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ９ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １０ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １１ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １２ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １３ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １４ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １５ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １６ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １７ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １８ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １９ of 20 ■ INTERNAL PHOTO FCC ID: V65C6522 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２０ of 20 ■ INTERNAL PHOTO

1.9 14.4 26.6 9.6 7.4 Unit : mm 3.8 11.1 1.3 14.4 26.7 1.4 1.5 24.8 1.4 11.1 10.3 1.5 1.8 12 11.1 124.0 64.0 Diversity UMTS B2/B4 LTE B4/B17 Main High band GSM 1800/1900 UMTS B1/B2/B4 LTE B4 WiFi/BT GPS Main Low band GSM 850/900 UMTS B5 LTE B17

Safety Document NO. KAT-1306-IN025P Maker CodeKIN-DIV-MS1305 Machine G66Built in AntennaM7 SYSTEMA ModelType Rev. DONGNAM 1/9 IR DATE2013. 06. 28 Model : G66 Item : Built in Antenna Page APPROVAL SHEET Company : DONGNAM M7 SYSTEMCustomer : Investigation Customer P/N : Maker Code : KIN-DIV-MS1305 VerificationApproval Department Circuit KRD01-00A10-01A1 --------------------- 09/09 09/09 -------------------- - KIN-DIV-MS1305 DATE Maker Code IR --------------------- 1.1 History List of Approval Sheet ------------ --------------------- 2. Circuit Specification ------------------------ 07/09 2.1 Test Settin g ----------------------------------------------- 2.1.1 Test Environment (Condition/Method) - Built in AntennaM7 SYSTEMA Rev. DONGNAM PART NO. ModelType 08/09 ▶ Contents ◀ G66 04/09 03/09 03/09-------------------- - 3. Mechanical Specification -------------------- 3.1 Assy Drawing ------------------------- --------------------- 2013. 06. 28 2 --------------------- 2.2 Electrical Specification --------------------------------------- --------------------- 2.2.1 Electrical Spec. of SET (With VSWR) -- 1. Revision History of Product Specification ------- 04/09 06/09 9Page/ 2.2.2 Passive Gain & 3D Pattern ---------- 04/09 KRD01-00A10-01A2 Detailed Contents of Revision Amount Quality Dept. M7 SYSTEM Model WS2A 1 IR 2013.06.28Approval Publication DONGNAM ᅳ Page IR M7 SYSTEMABuilt in Antenna Type Maker CodeKIN-DIV-MS1305 1.1 History List of Approval Sheet DATE2013. 06. 28 G66 Rev. DONGNAM 3/9 NO.Rev. DATE 1. Revison History of Product Specification Rev. Progress Stage History List of Approval Sheet Request Dept. PART NO. KRD01-00A10-01A3 Type Step 1. Connect ANT port with cable included adaptor to port1 of Network analyzer Step 2. Point out markers on network analyzer display at target frequencies. G66 2.1 Test Setting Page ① VSWR PART NO. 2.1.1 Test Environment (Condition/Method) Maker Code DONGNAM M7 SYSTEM Model Rev. IR Built in Antenna KIN-DIV-MS1305 9/4 Step 3. Inspect VSWR A DATE2013. 06. 28 2. Circuit Specification KRD01-00A10-01A4 DONGNAM M7 SYSTEM ② Radiation Pattern adn Gain Model PART NO. KIN-DIV-MS1305Maker Code 5/9 A Page Type Rev. Built in Antenna Step 2. Change over from a horn antenna to measuring antenna on target positioner G66 At the same time set up software program for chamber system control. Step 1. Calibrate chamber system for gain measurement using horn antenna. DATE2013. 06. 28 IR Step 3. Start a software program for chamber system control & measuring. KRD01-00A10-01A5 Average Gain (dBi) VSWR Peak Gain (dBi) ≤ -9.0 ≤ -7.5 ≤ -5.5 ≤ -7.0 ≤ 3.5 ≤ 3.5 LTE Band17 734MHz LTE Band17 746MHz UMTS Band 2 1930MHz UMTS Band 2 1990MHz UMTS Band4 2110MHz UMTS Band4 2115MHz ≤ -3.0≤ -4.5 ≤ -4.5 ≤ -3.0 ≤ 7.5 ≤ 4.0 ≤ 3.5 ≤ 3.5 ≤ -1.5 ≤ -1.0 Omni-directional Linear ≤ -7.0 Directivity Polarization Matching Value Frequency KIN-DIV-MS1305 G66 Model Maker Code A Type Rev. DONGNAMIR Built in Antenna DATE Page9 2013. 06. 28 M7 SYSTEM PART NO. 6/ 2.2 Electrical Specification ≤ -7.0 KRD01-00A10-01A6 7 M7 SYSTEMBuilt in Antenna BAR TYPE / 2013. 06. 28 9Page PART NO. A KIN-DIV-MS1305 IR G66 ModelType Rev. DONGNAM DATE Maker Code 2.2.1 Electrical Spec. of Set (With VSWR) KRD01-00A10-01A7 Model DATE / Built in AntennaM7 SYSTEM KIN-DIV-MS1305 2.2.2 Passive Gain & 3D Pattern BAR TYPE IR A Rev. DONGNAM G66 Maker Code 8 2013. 06. 28 9 PART NO. Page Type VerHorTotalVerHorTotal -13.6 dBi-6.9 dBi-6.1 dBi-7.6 dBi-4.1 dBi-3.3 dBi -13.6 dBi-7.1 dBi-6.2 dBi-7.4 dBi-4.6 dBi-3.4 dBi -11.4 dBi-10.6 dBi-8.0 dBi-5.6 dBi-3.7 dBi-2.1 dBi -11.2 dBi-8.0 dBi-6.3 dBi-4.8 dBi-2.0 dBi-0.5 dBi -9.5 dBi-6.2 dBi-4.5 dBi-4.3 dBi-1.1 dBi-0.1 dBi -10.4 dBi-7.5 dBi-5.7 dBi-3.8 dBi-2.7 dBi-1.9 dBi 2.85 dB 5.89 dB 5.79 dB 4.46 dB 3.72 dB Theta 45/Pie 330 Theta 60/Pie 150 The ta135/Pie 270 23.7 % 16.0 % 24.7 % Max Gain The ta135/Pie 120 Theta 45/Pie 315 23.6 % 35.2 % 27.1 %2155.000000 MHz 746.000000 MHz 1930.000000 MHz 1990.000000 MHz 734.000000 MHz 2110.000000 MHz The ta135/Pie 1202.77 dB Frequency EfficiencyDirectivityMax Position Average Gain KRD01-00A10-01A8 Maker Code / KIN-DIV-MS1305 2013. 06. 28 3.1 Assy Drawing Type G66 DATE Rev. DONGNAM 9 A Model PART NO. M7 SYSTEM IR Page 3. Mechanical Specification 9 Built in Antenna THIRD ANGLE DIMENSION Drawing Size A3(420X297) Prohibited the export information to a random DongNam industria l data. CONFIDENTIAL KRD01-00A10-01A9

Circuit Investigation Customer P/N : Maker Code : KIN-GPS-MS1303 VerificationApproval Department Model : G66 Item : Built in Antenna Page APPROVAL SHEET Company : DONGNAM M7 SYSTEMCustomer : 1/9 IR DATE2013. 06. 28 G66Built in AntennaM7 SYSTEMA ModelType Rev. DONGNAM Document NO. KAT-1306-IN023P Maker CodeKIN-GPS-MS1303 Machine Safety KRD01-00A10-01A1 9Page/ 04/09 04/09 06/09 2.2.2 Passive Gain & 3D Pattern --------- - 2 --------------------- 2.2 Electrical Specification --------------------------------------- --------------------- 2.2.1 Electrical Spec. of SET (With VSWR) -- 1. Revision History of Product Specification ------- 3. Mechanical Specification -------------------- 3.1 Assy Drawing ------------------------- --------------------- 08/09 ▶ Contents ◀ G66 04/09 03/09 03/09-------------------- - --------------------- Built in AntennaM7 SYSTEMA Rev. DONGNAM PART NO. ModelType 07/09 2.1 Test Settin g ----------------------------------------------- 2.1.1 Test Environment (Condition/Method) - KIN-GPS-MS1303 DATE Maker Code IR --------------------- 1.1 History List of Approval Sheet ------------ --------------------- 2. Circuit Specification ------------------------ 2013. 06. 28 --------------------- 09/09 09/09 KRD01-00A10-01A2 PART NO. History List of Approval Sheet Request Dept. NO.Rev. DATE 1. Revison History of Product Specification Rev. Progress Stage 3/ Type Maker CodeKIN-GPS-MS1303 1.1 History List of Approval Sheet DATE2013. 06. 28 G66 Rev. DONGNAM 9Page IR M7 SYSTEMABuilt in Antenna 1 IR 2013.06.28Approval Publication DONGNAM ᅳQuality Dept. M7 SYSTEM Model WS2A Detailed Contents of Revision Amount KRD01-00A10-01A3 A DATE2013. 06. 28 2. Circuit Specification Built in Antenna KIN-GPS-MS1303 9/4 Step 3. Inspect VSWR Rev. IRModelDONGNAM M7 SYSTEM Page ① VSWR PART NO. 2.1.1 Test Environment (Condition/Method) Maker Code Type Step 1. Connect ANT port with cable included adaptor to port1 of Network analyzer Step 2. Point out markers on network analyzer display at target frequencies. G66 2.1 Test Setting KRD01-00A10-01A4 Step 3. Start a software program for chamber system control & measuring. DATE2013. 06. 28 IR Built in Antenna Step 2. Change over from a horn antenna to measuring antenna on target positioner G66 At the same time set up software program for chamber system control. Step 1. Calibrate chamber system for gain measurement using horn antenna. Maker Code 5/9 A Page Type Rev. M7 SYSTEM ② Radiation Pattern adn Gain Model PART NO. KIN-GPS-MS1303 DONGNAM KRD01-00A10-01A5 ≤ -3.5 Ant GPS ≤ 2.0 6/ 2.2 Electrical Specification DONGNAMIR Built in Antenna DATE Page9 2013. 06. 28 M7 SYSTEM PART NO. G66 Model Maker Code A Type Rev. KIN-GPS-MS1303 Matching Value Frequency Directivity PolarizationLinear ≤ 0.5 Average Gain (dBi) VSWR Peak Gain (dBi) Omni-directional KRD01-00A10-01A6 Maker Code 2.2.1 Electrical Spec. of Set (With VSWR) IR G66 ModelType Rev. DONGNAM DATE PART NO. A KIN-GPS-MS1303 2013. 06. 28 9Page/7 M7 SYSTEMBuilt in Antenna BAR TYPE KRD01-00A10-01A7 Page Type PART NO. Maker Code 8 2013. 06. 28 9 IR A Rev. DONGNAM G66 2.2.2 Passive Gain & 3D Pattern BAR TYPE KIN-GPS-MS1303 Model DATE / Built in AntennaM7 SYSTEM VerHorTotalVerHorTotal -7.1 dBi-4.7 dBi-2.7 dBi1.0 dBi1.0 dBi1.7 dBi 53.2 % Max Gain 1575.000000 MHzThe ta180/Pie 04.43 dB Frequency EfficiencyDirectivityMax Position Average Gain KRD01-00A10-01A8 Page 3. Mechanical Specification 9 Built in AntennaM7 SYSTEM IR 9 A Model PART NO. 3.1 Assy Drawing Type G66 DATE Rev. DONGNAM Maker Code / KIN-GPS-MS1303 2013. 06. 28 THIRD ANGLE DIMENSION Drawing Size A3(420X297) Prohibited the export information to a random DongNam industria l data. CONFIDENTIAL KRD01-00A10-01A9

Circuit Investigation Customer P/N : Maker Code : KIN-TR3-MS1301 VerificationApproval Department Model : G66 Item : Built in Antenna Page APPROVAL SHEET Company : DONGNAM M7 SYSTEMCustomer : 1/9 IR DATE2013. 06. 28 G66Built in AntennaM7 SYSTEMA ModelType Rev. DONGNAM Document NO. KAT-1306-IN021P Maker CodeKIN-TR3-MS1301 Machine Safety KRD01-00A10-01A1 9Page/ 2.2.2 Passive Gain & 3D Pattern ---------- 04/09 2013. 06. 28 2 --------------------- 2.2 Electrical Specification --------------------------------------- --------------------- 2.2.1 Electrical Spec. of SET (With VSWR) -- 1. Revision History of Product Specification ------- 04/09 06/09 3. Mechanical S pecification -------------------- 3.1 Assy Drawing ------------------------- --------------------- 08/09 ▶ Contents ◀ G66 04/09 03/09 03/09-------------------- - Built in AntennaM7 SYSTEMA Rev. DONGNAM PART NO. ModelType 07/09 2.1 Test Settin g ----------------------------------------------- 2.1.1 Test Environment (Condition/Method) - --------------------- KIN-TR3-MS1301 DATE Maker Code IR --------------------- 1.1 History List of Approval Sheet ------------ --------------------- 2. Circuit Specification ------------------------ --------------------- 09/09 09/09 KRD01-00A10-01A2 PART NO. History List of Approval Sheet Request Dept. NO.Rev. DATE 1. Revison History of Product Specification Rev. Progress Stage 3/9 Type Maker CodeKIN-TR3-MS1301 1.1 History List of Approval Sheet DATE2013. 06. 28 G66 Rev. DONGNAM Page IR M7 SYSTEMABuilt in Antenna 1 IR 2013.06.28Approval Publication DONGNAM ᅳQuality Dept. M7 SYSTEM Model WS2A Detailed Contents of Revision Amount KRD01-00A10-01A3 Step 3. Inspect VSWR A DATE2013. 06. 28 2. Circuit Specification Rev. IR Built in Antenna KIN-TR3-MS1301 9/4 ModelDONGNAM M7 SYSTEM Page ① VSWR PART NO. 2.1.1 Test Environment (Condition/Method) Maker Code Type Step 1. Connect ANT port with cable included adaptor to port1 of Network analyzer Step 2. Point out markers on network analyzer display at target frequencies. G66 2.1 Test Setting KRD01-00A10-01A4 Step 3. Start a software program for chamber system control & measuring. DATE2013. 06. 28 IR Built in Antenna Step 2. Change over from a horn antenna to measuring antenna on target positioner G66 At the same time set up software program for chamber system control. Step 1. Calibrate chamber system for gain measurement using horn antenna. KIN-TR3-MS1301Maker Code 5/9 A Page Type Rev. M7 SYSTEM ② Radiation Pattern adn Gain Model PART NO. DONGNAM KRD01-00A10-01A5 ≤ -8.0 ≤ -8.0 ≤ -12.5 ≤ -12.0 ≤ -7.0 ≤ -6.0 ≤ 3.5 ≤ -4.5 ≤ -5.5 ≤ -4.0 ≤ -5.5 ≤ -6.0 ≤ -6.5 LTE Band17 734MHz LTE Band17 746MHz GSM850 824MHz GSM850 849MHz ≤ -4.5 ≤ -4.0 6/ 2.2 Electrical Specification DONGNAMIR Built in Antenna DATE Page9 2013. 06. 28 M7 SYSTEM PART NO. G66 Model Maker Code A Type Rev. KIN-TR3-MS1301 Matching Value Frequency Directivity Polarization GSM900 925MHz ≤ 5.0 ≤ 6.0 Omni-directional Linear ≤ 4.0 ≤ -4.0 ≤ -3.0 ≤ 0.0 GSM900 880MHz GSM900 915MHz GSM850 869MHz GSM850 894MHz LTE Band17 704MHz LTE Band17 716MHz ≤ -3.0 GSM900 960MHz ≤ 4.0 ≤ 3.0 ≤ 2.0 ≤ 3.0 ≤ 3.5 ≤ 3.0 ≤ 3.0 ≤ 4.0 Average Gain (dBi) VSWR Peak Gain (dBi) ≤ 7.5 ≤ -1.0 ≤ -2.0 ≤ -1.0 ≤ -2.0 ≤ -2.5 KRD01-00A10-01A6 Maker Code 2.2.1 Electrical Spec. of Set (With VSWR) IR G66 ModelType Rev. DONGNAM DATE PART NO. A KIN-TR3-MS1301 2013. 06. 28 9Page/7 M7 SYSTEMBuilt in Antenna BAR TYPE (LTE Band17) BAR TYPE (GSM850 & GSM900) KRD01-00A10-01A7 Page Type PART NO. Maker Code 8 2013. 06. 28 9 IR A Rev. DONGNAM G66 2.2.2 Passive Gain & 3D Pattern BAR TYPE KIN-TR3-MS1301 Model DATE / Built in AntennaM7 SYSTEM VerHorTotalVerHorTotal -14.0 dBi-6.6 dBi-5.9 dBi-9.4 dBi-3.2 dBi-2.8 dBi -13.2 dBi-5.5 dBi-4.9 dBi-8.0 dBi-2.1 dBi-1.8 dBi -10.4 dBi-3.1 dBi-2.3 dBi-4.9 dBi0.4 dBi0.9 dBi -11.2 dBi-4.2 dBi-3.4 dBi-6.0 dBi-0.6 dBi0.0 dBi -11.7 dBi-5.6 dBi-4.6 dBi-6.8 dBi-1.5 dBi-0.9 dBi -9.6 dBi-4.4 dBi-3.2 dBi-4.4 dBi-0.7 dBi0.3 dBi -10.7 dBi-5.7 dBi-4.5 dBi-5.4 dBi-2.1 dBi-1.0 dBi -11.7 dBi-6.7 dBi-5.5 dBi-6.5 dBi-3.1 dBi-1.9 dBi -11.4 dBi-6.4 dBi-5.2 dBi-6.3 dBi-2.7 dBi-1.6 dBi -13.0 dBi-8.3 dBi-7.1 dBi-8.0 dBi-4.4 dBi-3.3 dBi -12.8 dBi-8.2 dBi-6.9 dBi-7.6 dBi-4.1 dBi-3.0 dBi -17.5 dBi-12.4 dBi-11.2 dBi-12.5 dBi-8.2 dBi-7.4 dBi 20.4 % 7.5 % 3.64 dB 3.80 dB 3.87 dB 3.88 dB 3.09 dB 3.22 dB 3.33 dB 3.77 dB 3.51 dB 3.50 dB 3.56 dB Theta90/Pie255 Theta90/Pie255 Theta90/Pie240 Theta90/Pie240 Theta90/Pie240 Theta90/Pie255 Theta90/Pie255 Theta90/Pie255 Theta90/Pie255 32.7 % 58.4 % 25.8 % Max Gain Theta90/Pie240 Theta90/Pie240 46.1 % 34.5 % 47.6 % 35.3 % 28.1 % 29.9 % 19.7 % 960.000000 MHz 849.000000 MHz 869.000000 MHz 880.000000 MHz 894.000000 MHz 912.000000 MHz 928.000000 MHz 716.000000 MHz 734.000000 MHz 746.000000 MHz 704.000000 MHz 824.000000 MHz Theta 90/Pie 753.08 dB Frequency EfficiencyDirectivityMax Position Average Gain KRD01-00A10-01A8 Page 3. Mechanical Specification 9 Built in AntennaM7 SYSTEM IR 9 A Model PART NO. 3.1 Assy Drawing Type G66 DATE Rev. DONGNAM Maker Code / KIN-TR3-MS1301 2013. 06. 28 THIRD ANGLE DIMENSION Drawing Size A3(420X297) Prohibited the export information to a random DongNam industria l data. CONFIDENTIAL KRD01-00A10-01A9

Safety Document NO. KAT-1306-IN022P Maker CodeKIN-QU4-MS1302 Machine G66Built in AntennaM7 SYSTEMA ModelType Rev. DONGNAM 1/9 IR DATE2013. 06. 28 Model : G66 Item : Built in Antenna Page APPROVAL SHEET Company : DONGNAM M7 SYSTEMCustomer : Investigation Customer P/N : Maker Code : KIN-QU4-MS1302 VerificationApproval Department Circuit KRD01-00A10-01A1 --------------------- 09/09 09/09 -------------------- - KIN-QU4-MS1302 DATE Maker Code IR --------------------- 1.1 History List of Approval Sheet ------------ --------------------- 2. Circuit Specification ------------------------ 07/09 2.1 Test Settin g ----------------------------------------------- 2.1.1 Test Environment (Condition/Method) - Built in AntennaM7 SYSTEMA Rev. DONGNAM PART NO. ModelType 08/09 ▶ Contents ◀ G66 04/09 03/09 03/09-------------------- - 3. Mechanical Specification -------------------- 3.1 Assy Drawing ------------------------- --------------------- 2013. 06. 28 2 --------------------- 2.2 Electrical Specification --------------------------------------- --------------------- 2.2.1 Electrical Spec. of SET (With VSWR) -- 1. Revision History of Product Specification ------- 04/09 06/09 9Page/ 2.2.2 Passive Gain & 3D Pattern ---------- 04/09 KRD01-00A10-01A2 Detailed Contents of Revision Amount Quality Dept. M7 SYSTEM Model WS2A 1 IR 2013.06.28Approval Publication DONGNAM ᅳ Page IR M7 SYSTEMABuilt in Antenna Type Maker CodeKIN-QU4-MS1302 1.1 History List of Approval Sheet DATE2013. 06. 28 G66 Rev. DONGNAM 3/9 NO.Rev. DATE 1. Revison History of Product Specification Rev. Progress Stage History List of Approval Sheet Request Dept. PART NO. KRD01-00A10-01A3 Type Step 1. Connect ANT port with cable included adaptor to port1 of Network analyzer Step 2. Point out markers on network analyzer display at target frequencies. G66 2.1 Test Setting Page ① VSWR PART NO. 2.1.1 Test Environment (Condition/Method) Maker Code DONGNAM M7 SYSTEM Model Rev. IR Built in Antenna KIN-QU4-MS1302 9/4 Step 3. Inspect VSWR A DATE2013. 06. 28 2. Circuit Specification KRD01-00A10-01A4 DONGNAM M7 SYSTEM ② Radiation Pattern adn Gain Model PART NO. KIN-QU4-MS1302Maker Code 5/9 A Page Type Rev. Built in Antenna Step 2. Change over from a horn antenna to measuring antenna on target positioner G66 At the same time set up software program for chamber system control. Step 1. Calibrate chamber system for gain measurement using horn antenna. DATE2013. 06. 28 IR Step 3. Start a software program for chamber system control & measuring. KRD01-00A10-01A5 Average Gain (dBi) VSWR Peak Gain (dBi) ≤ 2.5 ≤ 0.5 ≤ 1.0 ≤ 1.0 ≤ 2.0 ≤ 3.0 ≤ -1.0 UMTS Band4 2155MHz ≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 3.0 ≤ 3.0 ≤ 2.5 ≤ -1.0 ≤ 0.5 ≤ -1.0 UMTS Band4 1710MHz UMTS Band4 1755MHz UMTS Band4 2110MHz ≤ 2.5 ≤ 2.5 Omni-directional Linear Directivity Polarization Matching Value Frequency KIN-QU4-MS1302 G66 Model Maker Code A Type Rev. DONGNAMIR Built in Antenna DATE Page9 2013. 06. 28 M7 SYSTEM PART NO. 6/ 2.2 Electrical Specification GSM1900 1930MHz GSM1900 1990MHz GSM1800 1710MHz GSM1800 1785MHz GSM1800 1805MHz GSM1800 1880MHz GSM1900 1850MHz GSM1900 1910MHz ≤ 0.0 ≤ 2.0 ≤ 0.5 ≤ -5.5 ≤ -3.5 ≤ -5.0 ≤ -3.5 ≤ -3.0 ≤ -3.0 ≤ -2.5 ≤ -2.0 ≤ -5.5 ≤ -4.0 ≤ -3.5 ≤ -5.0 KRD01-00A10-01A6 7 M7 SYSTEMBuilt in Antenna BAR TYPE / 2013. 06. 28 9Page PART NO. A KIN-QU4-MS1302 IR G66 ModelType Rev. DONGNAM DATE Maker Code 2.2.1 Electrical Spec. of Set (With VSWR) KRD01-00A10-01A7 Model DATE / Built in AntennaM7 SYSTEM KIN-QU4-MS1302 2.2.2 Passive Gain & 3D Pattern BAR TYPE IR A Rev. DONGNAM G66 Maker Code 8 2013. 06. 28 9 PART NO. Page Type VerHorTotalVerHorTotal -7.6 dBi-7.0 dBi-4.3 dBi-0.5 dBi-0.4 dBi-0.2 dBi -6.5 dBi-5.7 dBi-3.1 dBi-0.1 dBi-0.1 dBi1.1 dBi -5.7 dBi-5.0 dBi-2.3 dBi0.5 dBi0.5 dBi1.6 dBi -7.3 dBi-6.6 dBi-3.9 dBi-0.9 dBi-0.9 dBi0.2 dBi -5.5 dBi-5.0 dBi-2.2 dBi1.0 dBi1.1 dBi1.8 dBi -5.5 dBi-5.3 dBi-2.4 dBi0.5 dBi0.5 dBi1.6 dBi -4.7 dBi-4.9 dBi-1.8 dBi1.5 dBi1.5 dBi1.9 dBi -4.5 dBi-4.3 dBi-1.4 dBi2.1 dBi2.1 dBi3.0 dBi -4.3 dBi-3.6 dBi-0.9 dBi2.5 dBi2.6 dBi4.2 dBi -5.7 dBi-5.5 dBi-2.6 dBi0.7 dBi0.5 dBi3.0 dBi -6.8 dBi-6.7 dBi-3.8 dBi-0.5 dBi-0.6 dBi1.7 dBi 80.6 % 55.4 % 42.1 % 4.36 dB 5.13 dB 5.56 dB 5.42 dB 4.19 dB 3.96 dB 4.13 dB 4.03 dB 3.99 dB 3.63 dB Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 Theta180/Pie0 49.2 % 58.7 % 37.2 % Max Gain Theta180/Pie0 Theta180/Pie0 40.5 % 60.0 % 57.3 % 66.7 % 72.9 % 2110.000000 MHz 2155.000000 MHz 1880.000000 MHz 1910.000000 MHz 1930.000000 MHz 1990.000000 MHz 1750.000000 MHz 1790.000000 MHz 1805.000000 MHz 1710.000000 MHz 1850.000000 MHz Theta180/Pie04.08 dB Frequency EfficiencyDirectivityMax Position Average Gain KRD01-00A10-01A8 Maker Code / KIN-QU4-MS1302 2013. 06. 28 3.1 Assy Drawing Type G66 DATE Rev. DONGNAM 9 A Model PART NO. M7 SYSTEM IR Page 3. Mechanical Specification 9 Built in Antenna THIRD ANGLE DIMENSION Drawing Size A3(420X297) Prohibited the export information to a random DongNam industria l data. CONFIDENTIAL KRD01-00A10-01A9

G Report No.: G G 1. INTRODU 2. TEST ME 3. DESCRIP 4. DESCRIP 5. SAR MEA 6. DESCRIP 7. MEASUR 8. ANSI/ IEE 9. SAR SYS 10. SYSTEM 11. RF CON 12. SAR Te 13. SAR TE 13.1 M 13.2 M 13.3 M 13.4 M 13.5 M 13.6 M 13.7 M 13.8 M 13.9 M 13.10 M 13.11 M 13.12 M 13.13 M 13.14 M 13.14 M 13.16 M 13.17 M 14. SAR Me 15. SAR Su 15.4 SPLSR 17. CONCL 18. REFER Attachme n Attachmen Attachmen Attachmen G HCTA1 3 74, Seoiche TEL: + UCTION ...... ETHODOLO PTION OF D PTION OF T ASUREMEN …

Text truncated - open the document above for the full version.