V65C6750PDA PHONE

KYOCERA Corporation 8611 Balboa Avenue, San Diego, CA 92123 Phone: 858-882-2000 Date: March 28, 2013 Power of Attorney To whom it may concern, Please be notified that I, CK Li, have designated Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.2002 (b), we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: V65C6750 If you have any acknowledgement and response, please send it to Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, CK Li KYOCERA Corporation c/o KYOCERA Communications, Inc. (KCI) Tel: 858-882-2000 E-mail: [email protected]

KYOCERA Corporation 8611 Balboa Avenue, San Diego, CA 92123 Phone: 858-882-2000 Date: April 1, 2013 Declaration To whom it may concern, C6750 is a WLAN/Bluetooth combination antenna with FCC ID: V65C6750. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in V65C6750 should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Should you have any question, please have my best attention. Sincerely yours, CK Li KYOCERA Corporation c/o KYOCERA Communications, Inc. (KCI) Tel: 858-882-2000 E-mail: [email protected]

KYOCERA Corporation 8611 Balboa Avenue, San Diego, CA 92123 Phone: 858-882-2000 Date: March 28, 2013 Federal Communications Commission 7345 Oakland Mills Road Columbia MD21046 Subject: Request for Confidentiality FCC ID: V65C6750 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Parts List  Tune-up Procedure  Operational Description  Operational Description (Antenna) Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 90days after the Grant Date of Equipment Authorizations.  External Photos  Internal Photos  Test Setup Photos  Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, CK Li KYOCERA Corporation c/o KYOCERA Communications, Inc. (KCI) Tel: 858-882-2000 E-mail: [email protected]

KYOCERA Corporation 8611 Balboa Avenue, San Diego, CA 92123 Phone: 858-882-2000 Date: March 28, 2013 Federal Communications Commission Authorization and Evaluation Division 7345 Oakland Mills Road Columbia MD 21046 SUBJECT: FCC Application for FCC ID: V65C6750 To Whom It May Concern, We, KYOCERA Corporation, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, CK Li KYOCERA Corporation c/o KYOCERA Communications, Inc. (KCI) Tel: 858-882-2000 E-mail: [email protected]

8611 Balboa Avenue San Diego, CA 92123 Date: July 22, 2013 Federal Communications Commission 7345 Oakland Mills Road Columbia MD21046 Subject: Post Grant Request for Confidentiality FCC ID: V65C6750 To Whom It May Concern, We are requesting the commission to grant short-term confidentiality request on the following attachments an additional 90days (a total of 180days) after the original short-term confidentiality request has been expired. We understand that the information has been publicly available since the expiration. The request on the extension is due to the fact that the device is not yet offered on the US market.  External Photos  Internal Photos  Test Setup Photos  Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, CK Li Kyocera Corporation Fax: 858-882-2010 Tel: 858-882-2000 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC ID: V65C6750 Label Information 1 of 2 Model: C6750 Label Information Location Battery compartment Phone back view FCC Label FCC ID: V65C6750 Label Information 2 of 2 Model: C6750 FCC declaration statement Kyocera complies with FCC rules Part 2.925(d) that the label shall be permanently affixed to the equipment and shall be readily visible to the purchaser at the time of purchase: 1) This cellular phone has limited label space on the exterior of the unit. The FCC ID label is placed in the battery compartment. 2) The batteries for these devices are designed for easy removal and that the labels will be visible whenever the batteries are removed for charging or replacement. The phone will be market without the battery installed.

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 62 Report No. : SA130223C16 Issued Date : Mar. 25, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130223C16 Applicant : Kyocera Communications, Inc. Address : 8611 Balboa Ave., San Diego, CA 92123, USA Product : PDA Phone FCC ID : V65C6750 Brand : Kyocera Model No. : C6750 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v05 / KDB 648474 D04 v01 KDB 941225 D01 v02 / KDB 941225 D02 v02r01 / KDB 941225 D03 v01 KDB 941225 D04 v01 / KDB 941225 D05 v02r01 / KDB 941225 D06 v01 Date of Testing : Mar. 04, 2013 ~ Mar. 15, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 62 Report No. : SA130223C16 Issued Date : Mar. 25, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ...................................................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Mar. 25, 2013 Report No. : SA130223C16 Revision : R01 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows.

Report No.: RF130223C16-3 1 of 76 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF130223C16-3 MODEL NO.: C6750 FCC ID: V65C6750 RECEIVED: Feb. 23, 2013 TESTED: Mar. 11, 2013 ~ Mar. 16, 2013 ISSUED: Mar. 25, 2013 APPLICANT: Kyocera Communications, Inc. ADDRESS: 8611 Balboa Ave., San Diego, CA 92123, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130223C16-3 2 of 76 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ......................................................................................................... 5 1. CERTIFICATION ...................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 8 3. GENERAL INFORMATION ...................................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................ 9 3.2 DESCRIPTION OF TEST MODES ........................................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................................. 15 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 15 4. TEST TYPES AND RESULTS (FOR Bluetooth EDR) ........................................................... 16 4.1 Radiated Emission AND BANDEDGE Measurement ............................................................ 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 16 4.1.2 TEST INSTRUMENTS ........................................................................................................... 17 4.1.3 TEST PROCEDURES ........................................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................. 18 4.1.5 TEST SETUP ......................................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS .......................................................................................... 19 4.1.7 TEST RESULTS..................................................................................................................... 20 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................ 28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................................................... 28 4.2.2 TEST INSTRUMENTS ........................................................................................................... 28 4.2.3 TEST PROCEDURES ........................................................................................................... 29 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................. 29 4.2.5 TEST SETUP ......................................................................................................................... 30 4.2.6 EUT OPERATING CONDITIONS .......................................................................................... 30 4.2.7 TEST RESULTS..................................................................................................................... 31 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................................... 35 4.3.1 LIMIT OF HOPPING FREQUENCY USED ........................................................................... 35 4.3.2 TEST SETUP ......................................................................................................................... 35 4.3.3 TEST INSTRUMENTS ..............................................................................…

Text truncated - open the document above for the full version.

Report No.: RF130223C16-4 1 of 75 Report Format Version 5.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF130223C16-4 MODEL NO.: C6750 FCC ID: V65C6750 RECEIVED: Feb. 23, 2013 TESTED: Mar. 11, 2013 ~ Mar. 16, 2013 ISSUED: Mar. 25, 2013 APPLICANT: Kyocera Communications, Inc. ADDRESS: 8611 Balboa Ave., San Diego, CA 92123, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130223C16-4 2 of 75 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..........................................................................................................................5 2. SUMMARY OF TEST RESULTS .................................................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..........................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES ..............................................................................................8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..............................................9 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 13 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................... 13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 13 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ............................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 14 4.1.2 TEST INSTRUMENTS .............................................................................................................. 15 4.1.3 TEST PROCEDURES .............................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................ 17 4.1.6 EUT OPERATING CONDITIONS ............................................................................................. 17 4.1.7 TEST RESULTS ....................................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................ 28 4.2.2 TEST INSTRUMENTS .............................................................................................................. 28 4.2.3 TEST PROCEDURES .............................................................................................................. 29 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................... 29 4.2.5 TEST SETUP ............................................................................................................................ 30 4.2.6 EUT OPERATING CONDITIONS ............................................................................................. 30 4.2.7 TEST RESULTS ....................................................................................................................... 31 4.3 6dB BANDWIDTH MEASUREMENT ....................................................................................... 35 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ..................................................................... 35 4.3.2 TEST SETUP ............................................................................................................................ 35 4.3.3 TEST INSTRUMENTS ..…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Mar. 25, 2013 Report No. : SA130223C16 Revision : R01 Appendix D. Photographs of EUT and Setup FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130223C16 Revision : R01 <Photographs of EUT> FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130223C16 Revision : R01 <Photographs of SAR Setup> Right Cheek Right Tilted Left Cheek Left Tilted FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130223C16 Revision : R01 Front Face of EUT with 1.0 cm Gap Rear Face of EUT with 1.0 cm Gap Left Side of EUT with 1.0 cm Gap Right Side of EUT with 1.0 cm Gap Top Side of EUT with 1.0 cm Gap Bottom Side of EUT with 1.0 cm Gap

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 CONDUCTED EMISSION TEST (For NFC) 3 RADIATED EMISSION TEST (For WLAN 2.4GHz) 4 RADIATED EMISSION TEST (For Bluetooth EDR/ Bluetooth LE) 5 RADIATED EMISSION TEST (For WLAN 5GHz) 6 RADIATED EMISSION TEST (For NFC) 7 (DFS) 8 (Part 22) RADIATED EMISSION TEST 9 ERP POWER TEST 10 (Part 24) RADIATED EMISSION TEST 11 EIRP POWER TEST 12 (Part 27) RADIATED EMISSION TEST (LTE Band 4) 13 RADIATED EMISSION TEST (LTE Band 13) 14 ERP POWER TEST (LTE Band 4) 15 ERP POWER TEST (LTE Band 13)