V65E6762PDA Phone

Quick Start Guide for the KYOCERA DuraForce Get Started2 Important Safety Information18 Manufacturer’s Warranty33 End User License Agreement36 © 2014 Kyocera Corporation. All rights reserved. KYOCERA is a registered trademark of Kyocera Corporation. All other trademarks are the property of their respective owners. Android, Google Play, Google Maps, Gmail, and YouTube are trademarks of Google Inc. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kyocera Corporation is under license. Other trademarks and trade names are those of their respective owners. Get Started2 ♦Your KYOCERA DuraForce (page 2) ♦Get Your Phone Ready (page 3) ♦Use Your Phone (page 6) ♦ Customer Support (page 16) ♦Notes (page 17) This section introduces you to the basics of getting started with your KYOCERA DuraForce. Visit http://www.com/ for the complete User Guide and additional information. Get Started Your KYOCERA DuraForce LED Indicator Touchscreen Home Key Primary Microphone USB/Charging Port Audio Jack Speakers Recent Apps Key < Front >< Top > < Bottom > Front Camera Back Key Secondary Microphone Power/Lock Key Speaker Key Proximity/ Light Sensor 3Get Started Charge the Battery Important:Before turning on your phone, fully charge the battery. Be sure to use the charger that came with your phone. 1. Open the cover to the USB/charging port on the bottom of the phone. 2. Plug the smaller end of the micro-USB cable into the phone’s USB/charging port. 3. Plug the other end of the USB cable into the charger, and then plug the charger into an electrical outlet. 4. When charging is complete, remove the cable from the port and close the cover. Press around the edges of the cover to ensure that it is securely closed. Warning:Be sure all ports and covers are properly sealed to maintain the phone's waterproof capability. Back Camera Volume Key Programmable Key < Sides > < Back > microSD Card/ SIM Card Slots Camera Flash Internal Antennas Get Your Phone Ready Get Started4 Insert the SIM Card If not already inserted, follow the instructions below to insert a SIM card. Warning:Use only a Nano SIM card for this phone. 1. Open the cover to the microSD card/SIM card slots on the side of the phone. 2. Place the SIM card on the SIM card tray so that the cut corner of the card follows the shape of the tray. Holding the card and the tray with your fingers, insert them into the SIM card slot on the left and close the cover. 3. Press around the edges of the cover to the microSD card/SIM card slots to ensure that it is securely closed. Warning:Be sure all ports and covers are properly sealed to maintain the phone's waterproof capability. Insert the microSD Card A microSD™ card is an optional accessory that allows you to store images, videos, music, documents, and voice data. 1. Open the cover to the microSD card/SIM card slots on the side of the phone. 2. Insert a microSD card into the microSD card slot on the right with the gold terminals facing up. Gently push the card in until it snaps into place and close the cover. Tra y Cut SIM Card 5Get Started 3. Press around the edges of the cover to the microSD card/SIM card slots to ensure that it is securely closed. Warning:Be sure all ports and covers are properly sealed to maintain the phone's waterproof capability. Turn the Phone On Press and hold the Power/Lock key until the screen lights up. Tu r n t h e Screen On and Off Press the Power/Lock key to turn the screen on and off. Start the Phone On the default screen, swipe toward Start. Turn the Phone Off 1. Press and hold the Power/Lock key until the phone options are displayed. 2. Tap Power off > OK. microSD Card Terminals Get Started6 Voicemail Set Up Your Voicemail All unanswered calls are automatically transferred to your voicemail, even if your phone is in use or turned off. You should set up your voicemail and personal greeting as soon as your phone is activated: 1. Tap the Phone icon on the Home screen and tap Dialpad to display the phone dialpad. 2. Touch and hold . 3. Follow the voice prompts to create your password and record your name and greeting. It is strongly recommended that you set a voicemail password. Without a password, anyone who has access to your phone can access your messages. Retrieve Your Voicemail Touch and hold on the phone dialpad. From any other phone: 1. Dial your wireless phone number. 2. When your voicemail answers, press the asterisk key (*). 3. Enter your password. Phone Calls Make a Phone Call 1. Tap the Phone icon on the Home screen and tap Dialpad to display the phone dialpad. 2. Tap the digits of the number you want to call on the dialpad. Tap Delete to delete one or more digits. 3. Tap Call at the bottom of the screen to place the call. 4. Tap End call when you are finished. Use Your Phone 7Get Started Respond to an Incoming Call On the incoming call screen, swipe or touch and hold to answer the call. Swipe or touch and hold to send the call to your voicemail inbox. Swipe or touch and hold to ignore the call and send a message to the caller. Note:While on a call and holding the phone near your face to speak, the touchscreen automatically deactivates to avoid accidental screen presses. When you move the phone away from your face, the touchscreen automatically reactivates. Home Screen Display Settings Add App Shortcuts or Widgets to the Home Screen 1. Touch and hold the empty area on the Home screen. 2. Tap Apps or Widgets and slide the screen to find the item you want to add to the Home screen. 3. Touch and hold the app icon or a widget and move your finger to one of the Home screens. 4. When you find the position to place the item, release your finger. Move or Remove Items on the Home Screen Touch and hold the item you want to move or remove from the Home screen. ▪To move the item, drag it to a new area and release it. ▪To remove the item, drag it to “Remove” at the top of the screen and release it when it turns red. Get …

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch September 2, 2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): PDA Phone / E6762 / FCC ID: V65E6762 We affirm that between SIEMIC and Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, _____________________________

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 29 August 2014 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Re: HAC Attestation - FCC ID: V65E6762 To whom it may concern: We hereby declare that the MIF values detailed below are based on worst case operating modes for all air interfaces for which the HAC rating is provided based on the current methodology for determining MIF values. This device, with FCC ID: V65E6762, has been tested for the Hearing Aid Compatibility Requirement per ANSI C63.19-2011 version per Part 20.19. The M rating was determined by measuring the maximum steady state average E-field values in dB (V/m) as documented in the HAC report and adding the MIF value in dB (V/m) using pre-determined values provided by Speag. The Speag-reference documentation for supporting the pre-determined MIF value is Schmid & Partner Engineering AG, UID SUMMARY (Communication Systems for Calibration, Issued Date 2013/05/31). We confirm that the Speag simulation provided represents all the air interface modes applicable for a HAC rating for this handset. Reference Test Report Number(s): SA140707C19-1 SPEAG test files UID UID Version Communication System Name MIF (dB) 10021 DAB (06.02.2014) GSM-FDD (TDMA, GMSK) 3.63 10011 CAB (16.01.2014) UMTS-FDD (WCDMA) -27.23 10081 CAB (16.01.2014) CDMA2000 (1xRTT, RC3) -19.71 Sincerely, ____________________ Douglas Dunn Director of Regulatory Affairs Kyocera Communications, Inc.

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: August 27, 2014 Declaration We, Kyocera Corporation, declare that the device, FCC ID: V65E6762, Model Name:E6762, does not operate in Ad Hoc mode on non-US frequencies and/or on DFS frequencies. The client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Moreover, the 2.4G part of this device only operates on channels 1~11. All non-US frequencies and Country code selection are disabled through proprietary software and is not user changeable. Should you have any questions or comments regarding this matter, please do not hesitate to contact me. Sincerely yours, _____________________ Douglas Dunn Director of Regulatory Affairs

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: August 27, 2014 Declaration To whom it may concern, E6762 is a WLAN/Bluetooth combination antenna with FCC ID: V65E6762. A WLAN/Bluetooth co-existence mechanism is employed to ensure that the WLAN and Bluetooth transmitters do not operate simultaneously. Though the user perceives that WLAN and Bluetooth can be used simultaneously, in reality, the WLAN and the Bluetooth are time-shared with no overlap in transmission. Please contact me should you have any questions. Sincerely yours, Douglas Dunn Director of Regulatory Affairs Kyocera Corporation c / o Kyocera Communications, Inc.

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: August 27, 2014 Federal Communications Commission 7345 Oakland Mills Road Columbia MD21046 Subject: Request for Confidentiality FCC ID: V65E6762 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. l Schematic Diagram l Block Diagram l Parts List l Tune-up Procedure l Operational Description The above mentioned documents contain detailed system and equipment descriptions that are considered to be proprietary information in the operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitors an unfair advantage in the market. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. u External Photos u Internal Photos u Test Setup Photos u Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best regards, Douglas Dunn Director of Regulatory Affairs Kyocera Communications, Inc.

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: September 22, 2014 Declaration for DFS client devices Dear Examiner: Per KDB# 848637, We, Kyocera Corporation, declare that following description truly represent our product in consideration (FCC ID: V65E6762). Please do not hesitate to contact us, if further info is required. Thanks. Below is the channel / frequency plan for the device On DFS channels, the WLAN driver in the device operates under the control of an AP at all times. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. The signature and CRC checksum will be calculated and verified before a firmware upgrade is allowed. Attempts at unauthorized modification to firmware will lead the failure of the verification, thus the firmware upgrade will not be allowed. Sincerely yours, Douglas Dunn Director of Regulatory Affairs Kyocera Corporation c / o Kyocera Communications, Inc. CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 38 40 42 44 48 52 54 56 58 60 Frequency (MHz) 5180 5190 5200 5210 5220 5240 5260 5270 5280 5290 5300 Scan Type Active Active Active Active Active Active Passive Passive Passive Passive Passive CH 62 64 Frequency (MHz) 5310 5320 Scan Type Passive Passive CH 100 102 104 106 108 110 112 116 132 134 136 Frequency (MHz) 5500 5510 5520 5530 5540 5550 5560 5580 5660 5670 5680 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 140 Frequency (MHz) 5700 Scan Type Passive CH 149 151 153 155 157 159 161 165 Frequency (MHz) 5745 5755 5765 5775 5785 5795 5805 5825 Scan Type Active Active Active Active Active Active Active Active

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: August 27, 2014 Federal Communications Commission Authorization and Evaluation Division 7345 Oakland Mills Road Columbia MD 21046 SUBJECT: FCC Application for FCC ID: V65E6762 To Whom It May Concern, We, Kyocera Corporation, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, Douglas Dunn Director of Regulatory Affairs Kyocera Communications, Inc.

KYOCERA Communications, Inc 9520 Towne Centre Drive, Suite #200 San Diego, 92121 Phone: 858-882-1400 FAX: 858-450-0134 Date: August 27, 2014 To whom it may concern, Please be notified that I, Douglas Dunn, have designated Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.2002 (b), we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: V65E6762 If you have any acknowledgement and response, please send it to Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan directly. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, Douglas Dunn Director of Regulatory Affairs Kyocera Communications, Inc.

Page 1 of 3 Report No.: 140707C19 CONSTRUCTION PHOTOS OF EUT Page 2 of 3 Report No.: 140707C19 Page 3 of 3 Report No.: 140707C19

Page 1 of 10 Report No.: 140707C19 CONSTRUCTION PHOTOS OF EUT Page 2 of 10 Report No.: 140707C19 Page 3 of 10 Report No.: 140707C19 Page 4 of 10 Report No.: 140707C19 Page 5 of 10 Report No.: 140707C19 Page 6 of 10 Report No.: 140707C19 Page 7 of 10 Report No.: 140707C19 Page 8 of 10 Report No.: 140707C19 Page 9 of 10 Report No.: 140707C19 Page 10 of 10 Report No.: 140707C19

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 59 Report No. : SA140707C19 Issued Date : Aug. 18, 2014 FCC SAR Test Report Report No. : SA140707C19 Applicant : Kyocera Corporation c/o Kyocera Communications, Inc. Address : 9520 Towne Centre Drive, Suite 200 San Diego, CA 92121 Product : PDA Phone FCC ID : V65E6762 Brand : Kyocera Model No. : E6762 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r02 / KDB 648474 D04 v01r02 / KDB 941225 D01 v02 KDB 941225 D02 v02r02 / KDB 941225 D03 v01 / KDB 941225 D05 v02r03 KDB 941225 D06 v01r01 Sample Received Date : Jul. 07, 2014 Date of Testing : Jul. 31, 2014 ~ Aug. 09, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 59 Report No. : SA140707C19 Issued Date : Aug. 18, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ............................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Aug. 18, 2014 Report No. : SA140707C19 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Annual Confirmation of SAR Reference Dipole Model: D750V3 S/N : 1013 Measured Date : Apr. 24, 2014 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Note 750 Head TSL Return Loss -29.272 -30.125 2.9 % ±20 % PASS Real Impedance 53.498 52.443 -1.055 ±5 Ω PASS Imaginary Impedance -0.66211 -1.9648 -1.30269 ±5 Ω PASS 750 Body TSL Return Loss -30.343 -29.365 -3.2 % ±20 % PASS Real Impedance 48.809 48.898 0.089 ±5 Ω PASS Imaginary Impedance -2.7578 -3.4515 -0.6937 ±5 Ω PASS 750 MHz, Head TSL 750 MHz, Body TSL Annual Confirmation of SAR Reference Dipole Model: D835V2 S/N : 4d121 Measured Date : Apr. 24, 2014 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Note 835 Head TSL Return Loss -30.231 -29.447 -2.6 % ±20 % PASS Real Impedance 52.387 49.407 -2.98 ±5 Ω PASS Imaginary Impedance -2.0566 -3.3194 -1.2628 ±5 Ω PASS 835 Body TSL Return Loss -26.57 -25.576 -3.7 % ±20 % PASS Real Impedance 47.438 46.948 -0.49 ±5 Ω PASS Imaginary Impedance -3.791 -4.0984 -0.3074 ±5 Ω PASS 835 MHz, Head TSL 835 MHz, Body TSL Annual Confirmation of SAR Reference Dipole Model: D1900V2 S/N : 5d036 Measured Date : Jan. 20, 2014 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Note 1900 Head TSL Return Loss -25.996 -25.844 -0.6 % ±20 % PASS Real Impedance 51.111 51.555 0.444 ±5 Ω PASS Imaginary Impedance 4.957 5.0363 0.0793 ±5 Ω PASS 1900 Body TSL Return Loss -24.508 -24.067 -1.8 % ±20 % PASS Real Impedance 47.498 46.556 -0.942 ±5 Ω PASS Imaginary Impedance 5.2422 4.9878 -0.2544 ±5 Ω PASS 1900 MHz, Head TSL 1900 MHz, Body TSL Annual Confirmation of SAR Reference Dipole Model: D2450V2 S/N : 737 Measured Date : Jan. 20, 2014 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Note 2450 Head TSL Return Loss -26.268 -26.418 0.6 % ±20 % PASS Real Impedance 53.387 52.787 -0.6 ±5 Ω PASS Imaginary Impedance 3.7109 4.0722 0.3613 ±5 Ω PASS 2450 Body TSL Return Loss -25.479 -24.458 -4.0 % ±20 % PASS Real Impedance 50.123 49.055 -1.068 ±5 Ω PASS Imaginary Impedance 5.334 5.8881 0.5541 ±5 Ω PASS 2450 MHz, Head TSL 2450 MHz, Body TSL

Report No.: RF140707C19-2 1 of 66 Report Format Version 5.1.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF140707C19-2 MODEL NO.: E6762 FCC ID: V65E6762 RECEIVED: Jul. 07, 2014 TESTED: Jul. 24, 2014 ~ Aug. 12, 2014 ISSUED: Aug. 19, 2014 APPLICANT: Kyocera Corporation c/o Kyocera Communications, Inc. ADDRESS: 9520 Towne Centre Drive, Suite 200 San Diego, CA 92121 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140707C19-2 2 of 66 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................5 1. CERTIFICATION ..................................................................................................................................6 2. SUMMARY OF TEST RESULTS .........................................................................................................7 2.1 MEASUREMENT UNCERTAINTY...............................................................................................8 3. GENERAL INFORMATION ..................................................................................................................9 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................9 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 11 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................... 15 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 16 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ............................................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................... 17 4.1.2 TEST INSTRUMENTS ................................................................................................. 18 4.1.3 TEST PROCEDURES ................................................................................................. 19 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 19 4.1.5 TEST SETUP ............................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 21 4.1.7 TEST RESULTS............…

Text truncated - open the document above for the full version.