V65S2150A1DUAL BAND CDMA MOBILE PHONE WITH BLUETOOTH

KYOCERA COMMUNICATIONS, Inc 8611 Balboa Avenue, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 1 of 2 Date: 04/15/2013 Federal Communications Commission c/o Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538 To whom it may concern: We, the undersigned, hereby authorize Compliance Certification Services and hereafter referred to as UL-CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL-CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; KYOCERA COMMUNICATIONS, Inc 8611 Balboa Avenue, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 2 of 2 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue San Diego, San Diego, CA 92123

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 1 of 2 Date: 04/01/2013 Federal Communications Commission c/o Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538 To whom it may concern: We, the undersigned, hereby authorize the Comptest Services LLC and hereafter referred to as Comptest, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Comptest on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Comptest as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential 2 of 2 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue, San Diego, CA 92123

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc. Proprietary/Confidential Date: 04/01/2013 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: V65S2150A1 To Whom It May Concern: In accordance with §0.459 of CFR 47, KYOCERA Corporation requests confidentiality for the following items 1. Technical Description 2. Adjustment Procedure 3. Schematic 4. Block Diagram 5. Parts List These items contain detailed system and equipment description and related information about the product which KYOCERA Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, KYOCERA Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, ____________________________ C. K. Li Director of Regulatory Engineering Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue, San Diego, CA 92123

KYOCERA COMMUNICATIONS, INC. 8611 Balboa Avenue San Diego, San Diego, CA 92123 Kyocera Communications, Inc.. Proprietary/Confidential Date: 04/01/2013 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Short-Term Confidentiality FCC ID: V65S2150A1 To Whom It May Concern: In accordance with §0.457 and 0.459 of CFR 47, KYOCERA Corporation requests short-term confidentiality (135 days) for the following items 1. Test Setup Photos 2. External and Internal Photos 3. User’s Manual These items contain detailed system and equipment description and related information about the product which KYOCERA Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, KYOCERA Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, ____________________________ C. K. Li Director, Design Center Kyocera Corporation c/o Kyocera Communications, Inc. (KCI) 8611 Balboa Avenue, San Diego, CA 92123

Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-7-0313-R0 © 2013 Comptest Services LLC Page 1 of 2 External Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 7: EXTERNAL PHOTOS Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-7-0313-R0 © 2013 Comptest Services LLC Page 2 of 2 External Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

FCC ID: V65S2150A1 IC#: 3572A-S2150 Label Information 1 of 2 Model: S2150 Label Information Location Battery compartment Phone back view FCC/IC Label FCC ID: V65S2150A1 IC#: 3572A-S2150 Label Information 2 of 2 Model: S2150 FCC declaration statement Kyocera complies with FCC rules Part 2.925(d) that the label shall be permanently affixed to the equipment and shall be readily visible to the purchaser at the time of purchase: 1) This cellular phone has limited label space on the exterior of the unit. The FCC ID label is placed in the battery compartment. 2) The batteries for these devices are designed for easy removal and that the labels will be visible whenever the batteries are removed for charging or replacement. The phone will be market without the battery installed.

Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-8-0313-R0 © 2013 Comptest Services LLC Page 1 of 4 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 8: INTERNAL PHOTOS Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-8-0313-R0 © 2013 Comptest Services LLC Page 2 of 4 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-8-0313-R0 © 2013 Comptest Services LLC Page 3 of 4 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-8-0313-R0 © 2013 Comptest Services LLC Page 4 of 4 Internal Photos This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 1 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 APPENDIX A: SAR VALIDATION PLOTS Validation for HEAD IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 2 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/20/2013 835MHz Validation, Probe #3035, DAE #530, Dipole #467 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 835 MHz; σ = 0.91 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3035, ConvF(6.04, 6.04, 6.04), Calibrated: 2/22/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 835MHz/Area Scan (51x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.03 mW/g 835MHz/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.3 V/m; Power Drift = -0.103 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.962 mW/g; SAR(10 g) = 0.628 mW/g Maximum value of SAR (measured) = 1.04 mW/g 0 dB = 1.03mW/g IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 3 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 4 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/18/2013 1900Mhz Validation @ 20dBm Probe 1618, DAE 675 and Dipole 5d016 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1900 MHz; σ = 1.45 S/m; ε r = 38.45; ρ = 1000 kg/m 3 Phantom section: Flat Section Meas. Ambient Temp(celsius) = 22.10 ; Tissue Temp(celsius) = 21.40 DASY Configuration: Probe: ET3DV6 - SN1618; ConvF(5.17, 5.17, 5.17); Calibrated: 9/13/2012; Modulation Compensation: Sensor-Surface: 4mm (Mechanical Surface Detection), z = 2.7, 32.7 Electronics: DAE4 Sn675; Calibrated: 5/23/2012 Phantom: SAM; Type: SAM; Serial: TP-1152 DASY52 52.8.5(1059); SEMCAD X 14.6.8(7028) 1900 MHz Head Validation, 021813/1900MHz Validation @20dBm/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 4.47 W/kg 1900 MHz Head Validation, 021813/1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.697 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 6.28 W/kg SAR(1 g) = 3.74 W/kg; SAR(10 g) = 1.98 W/kg Maximum value of SAR (measured) = 4.24 W/kg 0 dB = 4.47 W/kg = 6.50 dBW/kg IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 5 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Date: 4/15/2013 Test Laboratory: Comptest/Kyocera 1900Mhz Validation @ 20dBm Probe 1618, DAE 530 and Dipole 5d016, 041513 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.43 mho/m; ε r = 38.7; ρ = 1000 kg/m 3 Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.77 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.7 V/m; Power Drift = -0.011 dB Peak SAR (extrapolated) = 6.33 W/kg SAR(1 g) = 3.88 mW/g; SAR(10 g) = 2.09 mW/g Maximum value of SAR (measured) = 4.42 mW/g 0 dB = 4.77mW/g IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 6 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Validation for BODY IC#: Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9A-0213_Rev1 © 2013 Comptest Services LLC Page 7 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/14/2013 835MHz Validation (Muscle), Probe #3036, DAE #603, Dipole #5d016 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: M800,Medium parameters used: f = 835 MHz; σ = 0.95 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 835MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.04 mW/g 835MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.0 V/m; Power Drift = 0.132 dB Peak SAR (extrapo…

Text truncated - open the document above for the full version.

Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 1 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 Appendix B1: SAR DISTRIBUTION PLOTS (HEAD) CELL-BC0 Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 2 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/20/2013 FCC S2150 CDMA-800 BC-0 Left, Ch. 1013, Left Cheek Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.91 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ES3DV3 - SN3035, ConvF(6.04, 6.04, 6.04), Calibrated: 2/22/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 Ch1013 LC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.400 mW/g CDMA-800 Ch1013 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.51 V/m; Power Drift = -0.170 dB Peak SAR (extrapolated) = 0.744 W/kg SAR(1 g) = 0.347 mW/g; SAR(10 g) = 0.231 mW/g Maximum value of SAR (measured) = 0.373 mW/g 0 dB = 0.400mW/g Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 3 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 4 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/20/2013 FCC S2150 CDMA-800 BC-0 Left, Ch. 1013, Left Tilt Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.91 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ES3DV3 - SN3035, ConvF(6.04, 6.04, 6.04), Calibrated: 2/22/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 Ch1013 LT/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.154 mW/g CDMA-800 Ch1013 LT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.56 V/m; Power Drift = -0.018 dB Peak SAR (extrapolated) = 0.188 W/kg SAR(1 g) = 0.150 mW/g; SAR(10 g) = 0.114 mW/g Maximum value of SAR (measured) = 0.157 mW/g 0 dB = 0.154mW/g Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 5 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/20/2013 FCC S2150 CDMA-800 BC-0 Right, Ch. 1013, Right Cheek Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.91 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ES3DV3 - SN3035, ConvF(6.04, 6.04, 6.04), Calibrated: 2/22/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 Ch1013 RC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.336 mW/g CDMA-800 Ch1013 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.22 V/m; Power Drift = 0.185 dB Peak SAR (extrapolated) = 0.665 W/kg SAR(1 g) = 0.391 mW/g; SAR(10 g) = 0.257 mW/g Maximum value of SAR (measured) = 0.444 mW/g CDMA-800 Ch1013 RC/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.22 V/m; Power Drift = 0.185 dB Peak SAR (extrapolated) = 0.510 W/kg SAR(1 g) = 0.323 mW/g; SAR(10 g) = 0.230 mW/g Maximum value of SAR (measured) = 0.351 mW/g 0 dB = 0.336mW/g Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 6 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B1-0213_rev1 © 2013 Comptest Services LLC Page 7 of 16 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 02/20/2013 FCC S2150 CDMA-800 BC-0 Right, Ch. 1013, Right Tilt Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.91 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ES3DV3 - SN3035, ConvF(6.04, 6.04, 6.04), Calibrated: 2/22/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 Ch1013 RT/Area Scan (91x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.200 mW/g CDMA-800 Ch1013 RT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.12 V/m; Power Drift = 0.06…

Text truncated - open the document above for the full version.

Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 1 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 APPENDIX B2: SAR DISTRIBUTION PLOTS (BODY) CELL-BC0 Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 2 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC S2150 CELL Flat with 15mm Air Space, Face Down Ch. 1013, Closed Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT Face Down Ch1013/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.26 mW/g CDMA-800 FLAT Face Down Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.4 V/m; Power Drift = 0.075 dB Peak SAR (extrapolated) = 1.57 W/kg SAR(1 g) = 1.18 mW/g; SAR(10 g) = 0.834 mW/g Maximum value of SAR (measured) = 1.26 mW/g 0 dB = 1.26mW/g Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 3 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 4 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC S2150 CELL Flat with 15mm Air Space, Face Down Ch. 384, Closed Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.95 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Face Down Ch384/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.24 mW/g CDMA-800 FLAT - Face Down Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.3 V/m; Power Drift = -0.073 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 1.15 mW/g; SAR(10 g) = 0.809 mW/g Maximum value of SAR (measured) = 1.23 mW/g 0 dB = 1.24mW/g Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 5 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC S2150 CELL Flat with 15mm Air Space, Face Down Ch. 777, Closed Communication System: CDMA-800, Frequency: 848.31 MHz, Duty Cycle: 1:1 Medium: M800,Medium parameters used (interpolated): f = 848.31 MHz; σ = 0.95 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT Face Down Ch777/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.10 mW/g CDMA-800 FLAT Face Down Ch777/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.3 V/m; Power Drift = 0.005 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 1.02 mW/g; SAR(10 g) = 0.712 mW/g Maximum value of SAR (measured) = 1.08 mW/g 0 dB = 1.10mW/g Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 6 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC S2150 CELL Flat with 15mm Air Space, Face Up Ch. 1013, Closed Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Face Up Ch1013/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.549 mW/g CDMA-800 FLAT - Face Up Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.0 V/m; Power Drift = 0.066 dB Peak SAR (extrapolated) = 0.677 W/kg SAR(1 g) = 0.523 mW/g; SAR(10 g) = 0.376 mW/g Maximum value of SAR (measured) = 0.556 mW/g 0 dB = 0.549mW/g Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT- S2150-9B2-0213 © 2013 Comptest Services LLC Page 7 of 17 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Test Laboratory: Comptest/Kyoce…

Text truncated - open the document above for the full version.

Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-9C-0313-R0 © 2013 Comptest Services LLC Page 1 of 1 SAR Probe Cert This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 APPENDIX C: SAR PROBE CALIBRATION CERTIFICATE Total pages including cover page = 34 # 1618 # 3035 # 3036

Applicant : Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-9D-0113-R0 © 2013 Comptest Services LLC Page 1 of 1 SAR Dipole Cert This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. EXHIBIT 9 APPENDIX D: SAR DIPOLE CALIBRATION CERTIFICATE Total pages including cover page = 17 # 467 # 5d016

Applicant: Kyocera FCC ID: V65S2150A1 Report #: CT-S2150-9-0213-R2 © 2013 Comptest Services LLC Page 1 of 32 SAR Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC. Specific Absorption Rate (SAR) FCC 47 CFR Part 2 Test Report F…

Text truncated - open the document above for the full version.