VE2-MFR12C00Automotive exterior radar

Local Representative Letter for certification service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name FRN VE2-MFR12C00 MFR1.2C00 0016616849 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US-American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement without expiration date US-American Point of Contact Signature Company: Valeo North America, Inc. FRN: 0034212852 (only if the US-American Point of Contact is having business with the FCC beyond this statement) Name: Carl McConkie Address: 150 Stephenson Highway, 48083, Troy, MI, USA Phone: 248-315-9716 Email: [email protected] Date: Applicant/Approval Holder Company: Valeo Schalter und Sensoren GmbH Address: Laiernstrasse 12, 74321, Bietigheim-Bissingen, Germany Signature Signature Name: Mark WUSK Position: DETECT Quality Director Phone: +4971429164054 Email: [email protected] Date: Name: Aurélien Ramseyer Position: TPL RADAR Director Phone: +4971429163640 Email: [email protected] Date: 26/05/2026 01/06/2026 Carl McConkie (Jun 1, 2026 09:33:01 EDT) Carl McConkie 01/06/2026

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026-05-22 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: VE2-MFR12C00 FCC ID Model name VE2-MFR12C00 MFR1.2C00 Valeo Schalter und Sensoren GmbH (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, On behalf of Company: Valeo Schalter und Sensoren GmbH, Laiernstrasse 12, 74321, Bietigheim-Bissingen, Germany Signature Signature Printed Name: Volker UEBELE Printed Name: Mark WUSK Title: Department Engineering Discipline Manager Title: Quality Director Email: [email protected] Email: [email protected] i.A. Volker Uebele (May 26, 2026 10:29:38 GMT+2) i.A. Volker Uebele

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026-05-22 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID Model name VE2-MFR12C00 MFR1.2C00 Valeo Schalter und Sensoren GmbH (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, On behalf of Company: Valeo Schalter und Sensoren GmbH, Laiernstrasse 12, 74321, Bietigheim-Bissingen, Germany Signature Signature Printed Name: Volker UEBELE Printed Name: Mark WUSK Title: Department Engineering Discipline Manager Title: Quality Director Email: [email protected] Email: [email protected] i.A. Volker Uebele (May 26, 2026 10:29:38 GMT+2) i.A. Volker Uebele

AUTHORIZATION LETTER Subject: Letter of Authorization To Whom it may concern We, Valeo Schalter und Sensoren GmbH (“Valeo”), the undersigned, hereby authorize TÜV Rheinland (Shenzhen) Co., Ltd ("TÜV”) to act on our behalf exclusively in the activities specified below (see Activities) relating to the certification of the Product in accordance with local regulation and standards. Scope of Autotization (“Product”): Product Name: Automotive exterior radar Trademark: Valeo Model Number(s): MCR1.2C00, MFR1.2C00 Type Approval for the targeted countries: Annex 1 Activities: 1. Forward all information to the extent strictly necessary related to the approval and certification of the Product to the responsible regulatory agencies as required; 2. To discuss any issues concerning the approval/certification application; 3. To prepare, sign, and submit all necessary application forms required for Product certification; 4. Only with Valeo's prior written consent in each case request and manage confidential sensitive technical documents; 5. TÜV shall act in accordance with the Valeo Business Partner Code of Conduct in the execution of its services. This adherence covers all pillars of the Code, including anti-corruption, export controls and economic sanctions. 6. Any third party selected by TÜV to perform its services in the countries or territories listed in Annex 1 must undergo Valeo's due diligence process and be subject to Valeo's prior vetting. This authorization is valid until 28.03.2027. On behalf of Company: Valeo Schalter und Sensoren GmbH Name: Mark WUSK Name: Rene KARSTEN Job Position: DETECT Quality Director Job Position: RO PL Projects Manager Director Telephone: +4971429164054 Telephone: +4971429162368 E-mail: [email protected] E-mail: [email protected] Date: 30.04.2026 Date: 30.04.2026 1 Rene KARSTEN (Apr 30, 2026 10:10:57 GMT+2) Annex 1 Type Approval for the targeted countries Targeted countries/Area Type Approval Name European Economic Area CE, Emark Canada ISED US FCC Australia RCM Korea （of South) KC Kuwait TRA New Zealand RSM Singapore IMDA UAE (United Arab Emirates) TDRA Kazakhstan EAC DOC/COC Kyrgyzstan KG COC Uzbekistan OZS COC Tajikistan TJ COC Saudi Arabia CST-COC Oman TRA Bahrain TRA Qatar CITRA Mongolia CRC 2

TCB FCC Request for Confidentiality Letter Number: MS-0044715 Revision: 5 Effective date: July 9, 2024 Author: Chan Wang Owner: Chan Wang Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process Valeo Schalter und Sensoren GmbH Date: 2026.05.22 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: VE2-MFR12C00 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term n/a External Photo ☒ Short Term ☐ Permanent Internal Photos *** ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Schematics ☒ Short Term ☐ Permanent Test Setup*** ☐ Short Term ☒ Permanent Tune-Up Procedure ☒ Short Term ☐ Permanent User’s Manual*** ☐ Short Term ☒ Permanent Part List Valeo Schalter und Sensoren GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, _________________________ Printed Name: Volker UEBELE Title: Department Engineering Discipline Manager Email: [email protected] _________________________ Printed Name: Mark WUSK Title: Quality Director Email: [email protected] i.A. Volker Uebele (May 26, 2026 10:29:38 GMT+2) i.A. Volker Uebele

BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL Label Artwork Product: Automotive exterior radar Model: MFR1.2C00 __________________________________________________________________________________________________________________ Status:RELEASE Doc. No.: 1ST252050MFR1.22026T5 Revision:1.0 Date: 28-04-2026 Valeo Schalter und Sensoren GmbH CONFIDENTIAL BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL CONFIDENTIAL INFORMATION. This document contains Confidential Commercial Information of Valeo and may not be duplicated, copied or distributed without the prior written authorization of Valeo. Valeo reserves, and does not waive, all of its legal rights to enforce and protect the confidentiality of this information. 2 Label Artwork Label Location Label Layout BRAINLIGHTPOWERSERVICE Strictly private & confidential Follow us on: BRAINLIGHTPOWERSERVICE Strictly private & confidential4 Revision history VersionDateDescription of changeEditor v 1.024-03-2026Initial releaseYalong. Liu/Fangyue Wu v 1.128-04-2026Addition of the FCC/IC/KC IDYalong. Liu/Fangyue Wu v X

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26PDJ7 003 Auftrags-Nr.: Order no.: 27227218 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-03-26 Auftraggeber: Client: Valeo Schalter und Sensoren GmbH Laiernstraße 12, 74321 Bietigheim-Bissingen, Germany Prüfgegenstand: Test item: Automotive exterior radar Bezeichnung / Typ-Nr.: Identification / Type no.: MFR1.2C00 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: 47 CFR FCC Part 2.1091 RSS-102 Issue 6 December 2023 Wareneingangsdatum: Date of sample receipt: 2026-03-27 Refer to photo document Prüfmuster-Nr.: Test sample no: A004233953-001~023 Prüfzeitraum: Testing period: 2026-03-29 to 2026-04-16 Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Jonathan Li Datum: Date: 2026-04-21 Ausstellungsdatum: Issue date: 2026-04-21 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: VE2-MFR12C00 IC: 7173A-MFR12C00 HVIN: MFR1.2C00 PMN: MFR1.2C00 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26PDJ7 003 Test report no.: Seite 2 von 9 Page 2 of 9 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity…

Text truncated - open the document above for the full version.

BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL Antenna Datasheet ——Basic information Product: Mid Range Device 77GHz Automotive Radar Model:MFR1.2C00 __________________________________________________________________________________________________________________ Status:DRAFT /RELEASE/CANCEL Doc. No.: 1ST252050MFR1.22026T1.1 Revision:1.0 Date: DAY-MONTH-YEAR Valeo Schalter und Sensoren GmbH CONFIDENTIAL BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL CONFIDENTIAL INFORMATION. This document contains Confidential Commercial Information of Valeo and may not be duplicated, copied or distributed without the prior written authorization of Valeo. Valeo reserves, and does not waive, all of its legal rights to enforce and protect the confidentiality of this information. 2 Antenna Basic Information General DesignationMFR1.2 B1 SR Manufacturer & AddressGapwaves AB Street 1 Nellickevägen 22 GOTHENBURG SWEDEN Model/Part No.: EAA8898 BRAIN LIGHT POWER SERVICE Strictly private & confidential CONFIDENTIAL CONFIDENTIAL INFORMATION. This document contains Confidential Commercial Information of Valeo and may not be duplicated, copied or distributed without the prior written authorization of Valeo. Valeo reserves, and does not waive, all of its legal rights to enforce and protect the confidentiality of this information. 3 Antenna Basic Information Electrical characteristics Frequency76-77GHz Transmitter Power(PK/AV)N/A Modulation WaveformFMCW Transmission Duty Overall 27% Antenna GAIN( Max)14.27dBi Maximum Current/mAN/A Turns/nN/A Wire diameter/mm N/A Antenna Typewaveguide BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL CONFIDENTIAL INFORMATION. This document contains Confidential Commercial Information of Valeo and may not be duplicated, copied or distributed without the prior written authorization of Valeo. Valeo reserves, and does not waive, all of its legal rights to enforce and protect the confidentiality of this information. 6 Antenna Basic Information Electrical diagram BRAINLIGHTPOWERSERVICE Strictly private & confidential CONFIDENTIAL CONFIDENTIAL INFORMATION. This document contains Confidential Commercial Information of Valeo and may not be duplicated, copied or distributed without the prior written authorization of Valeo. Valeo reserves, and does not waive, all of its legal rights to enforce and protect the confidentiality of this information. 7 Antenna Basic Information Pattern BRAINLIGHTPOWERSERVICE Strictly private & confidential Follow us on: BRAINLIGHTPOWERSERVICE Strictly private & confidential9 Revision history VersionDateDescription of changeEditor v 1.024-03-2026Initial releaseYalong. Liu/Fangyue Wu v 1.1 v X

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26PDJ7 002 Auftrags-Nr.: Order no.: 27227218 Seite 1 von 18 Page 1 of 18 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-03-26 Auftraggeber: Client: Valeo Schalter und Sensoren GmbH Laiernstraße 12, 74321 Bietigheim-Bissingen, Germany Prüfgegenstand: Test item: Automotive exterior radar Bezeichnung / Typ-Nr.: Identification / Type no.: MFR1.2C00 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: 47 CFR Part 95, Subpart M Wareneingangsdatum: Date of sample receipt: 2026-03-27 Refer to photo document Prüfmuster-Nr.: Test sample no: A004233953-001~023 Prüfzeitraum: Testing period: 2026-03-29 to 2026-04-16 Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Expert Signed by: Bell Hu genehmigt von: authorized by: X Expert Signed by: Jonathan Li Datum: Date: 2026-06-11 Ausstellungsdatum: Issue date: 2026-06-11 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: VE2-MFR12C00 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26PDJ7 002 Test report no.: Seite 2 von 18 Page 2 of 18 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test repo…

Text truncated - open the document above for the full version.