VG8TM034KYYWMicrowave Oven

SAVE THESE INSTRUCTIONS CAREFULLY Read these instru ctions carefully before using your mi crowave oven, and keep it carefully. If yo u f ollow t he instructions, your oven will provide you with many years of good s ervice. MODEL:TM034K6ME-PSH PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces. the oven door close properly and that there is no damage to the: (1) DOOR (bent) (2) HINGES AND LATCHES (broken or loosened) (3) DOOR S EALS AND S EALING SURFACE (d) The oven shoul d not be adjusted or repaired by anyone except properly quali fied service personnel. S Specifications 120 V~ 60 Hz 1500 W 1000 W Mod el Rated Voltage Microwave Input Microwave Output 2 TM034K6ME-PSH (a) Do not attempt to operate this oven with the door open si nce open door (c) Do not operate the oven if it is damaged. It is particularly important that 1. Read all instructions before using the appliance. 2. Read and follow the specific: "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found on page 2. 3. This appliance must be grounded. Connect only to properly grounded outlet. See "GROUNDING INSTRUCTIONS" found on page 5. 4. Install or locate this appliance only in accordance with the provided installation instructions. 5. Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. 6. Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use. 7. As with any appliance, close supervision is necessary when used by children. 8. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this produc t near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 12. Do not immerse cord or plug in water. 13. Keep cord away from heated surface. 14. Do not let cord hang over edge of table or counter . 15. When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth. 16. To reduce the risk of fire in the oven cavity: 1). Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. 2). Remove wire twist-ties from paper or plastic bag before placing bag in oven. 3). If material inside of the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. 4). Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following: 3 17. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS D ISTURBED OR A UTENSIL IS INSERTED INTO THE L IQUID. To reduce the risk of injury to persons: 1) Do not overheat the liquid. 2) Stir the liquid both before and halfway through heating it. 3) Do not use straight-sided containers with narrow necks. 4 ) After heating, allow the container to stand in the microwave oven for a short time before removing the container. 5) Use extreme care when inserting a spoon or other utensil into the container. 18. Oversized food or oversized metal utensils should not be inserted in a microwave/ toaster oven as they may create a fire or risk of electric shock. 19. Do not clean with metal scouring pads. Pieces can burn off the pad and touch electrical parts involving a risk of electric shock. 20. Do not use paper products when appliance is operated in the toaster mode. 21. Do not store any materials, other than manufacturer's recommended accessories, in this oven when not in use. 22. Do not cover racks or any other part of the oven with metal foil. This will cause over- heating of the oven. 23. Clean Ventilation Hoods Frequently - Grease should not be allowed to accumulate on hood or filter. 24. When flaming foods under the hood, turn th e fan on. 25. Use care when cleaning the vent-hood filter. Corrosive cleaning agents, such as lye- based oven cleaners, may damage the filter. 26. Suitable for use above both gas and electric cooking equipment. SAVE THESE INSTRUCTIONS 4 GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING - Improper use of the grounding can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as t…

Text truncated - open the document above for the full version.

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-7-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: VG8TM034KYYW Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Print Name: Ye Jilin Title: Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-7-12 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: VG8TM034KYYW Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Print Name: Ye Jilin Title: Engineer

ArentFox Schiff LLP 1717 K Street, NW Washington, DC 20006 202.857.6000MAIN 202.857.6395FAX ATTENTION: FCC Certification –Section 2.911(d)(7) Information Designated U.S. Agent Company Name:ArentFox Schiff LLP Contact Name:Jeffrey Rummel Street Address:1717 K St., nw City/Province/Zip:Washington, D.C. 20006 Telephone No: (202)715-8479 Email: [email protected] FRN #: 0021243860 FCC ID: This letter is to confirm that we (“ArentFox Schiff LLP”) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Jeffrey Rummel The Applicantacknowledgesthat they must maintain an agentfor no less than one year after terminatingall marketing and importation ORthe conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent informationabove changes. TO: (Applicant and U.S. Agent are Separate Parties) U.S. Agent Designation for Service of Process [email protected] 202.715.8479DIRECT Technology Practice Leader Partner and Communications & Jeffrey Rummel afslaw.com FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 2023/7/18 VG8TM034KYYW Page 2 022423-17 Rev 6 Telephone No:+86-0757-26339595 Email:[email protected] Applicant Signature: Date: Signed by (Printed Name/Title): Jilin Ye City/Province/Zip: Foshan, Guangdong, China Street Address: No.6, Yong An Road, Beijiao, Shunde Contact Name: Jilin Ye Grantee Code: VG8 Company name: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Applicant 2023/7/18

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd Address: No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China Tel: +86-0757-26339595 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2023-7-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd, the undersigned, hereby authorizes Shenzhen Accurate Technology Co.,Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co.,Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Print Name: Ye Jilin Title: Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: [email protected] FCC Confidential Authorization Date: 2023-7-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: VG8TM034KYYW In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd hereby requests long- term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Print Name: Ye Jilin Title: Engineer

Guangdo Address Tel: +86 - Email: ye 2023-7-1 To Whom We, Gua Product s Multiple □No Diff Testing P TM034K6 Notes: Pr FCC ID: Multiple Besides t We guara of any fa Best Re g Signatu Print N a Title: En there ong Midea K : No.6, Yong -0757-26339 [email protected] 18 m It May Co angdong Mid s Name Mode Models fference Products 6ME-PSH roducts teste VG8TM034 Model have the differenc antee that all alse informat gards, ure: ame: Ye Ji ngineer are some di f Kitchen Appli g An Road, B 9595 com oncern, dea Kitchen A e M el TM TM M √ Dif Mul TM0 TM0 MMO ed - the produ 4KYYW e the same st ces in the tab l the informa tion or conce lin fferences bet iances Manu Beijiao, Shun Declara Appliances M Microwave Ov M034K6ME-P M034K##-PS MO12S3AS fferences as t ltiple Models 034K##-PSH 034K##-PS, O12S3AST, ucts tested b tructure, PCB ble above, we ation provide ealing. tween our M ufacturing C nde, Foshan ation of D Manufacturin ven PSH SH, TM034K ST, MMO12S the below s H, TM034K* TM034K** * , MMO12S4 by Shenzhen B, material a e declare the ed above is t Multiple Mod o.,Ltd n,Guangdong Differenc ng Co., Ltd, K***-PSH，T S4AST **-PSH， *-PS , AST Accurate Te and function e products are true, and note els and test p g,China ce hereby decl TM034K##- Details Changes decorati series, w series. E four app case is o means it MMO12 custome are diffe For ## o blank ,in echnology C to the testing e identical. e that we wi products. De lare that -PS, TM034 s in appearan ive parts. This with different Each product i pearances. Th only one in a c t also has fou 2S3AST and M er models, bu erent. or ***,"#","*" m ndicates differ Co., Ltd., g products. ll bear all th e etails as below K***-PS , ce of iron she s product has names betwe n each series e main test o f certain series, r appearance MMO12S4AST t the model n may be 0-9,a- rent appearan e consequen w: ell some en each has f this which s. are names z or nce nces

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 1 of 6 External Photos Appearance Version 1 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 2 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 3 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 4 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 5 of 6 Appearance Version 2 Appearance Version 3 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 External Photos Page 6 of 6 Appearance Version 4 Note: only the appearance is different.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 1 of 7 Internal Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 2 of 7 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 3 of 7 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 4 of 7 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 5 of 7 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 6 of 7 Module FCC ID: VG8MWBWB01 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Internal Photos Page 7 of 7

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230625-36101E-EM-01 Version 27: 2023-01-30 Page 10 of 26 FCC-EMC FCC §18.313, §1.1310, §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; Measurement Environmental Conditions Temperature: 22 °C Relative Humidity: 53 % ATM Pressure: 101.0 kPa The testing was performed by Jason Liu on 2023-06-26. Radiation leakage was measured in the as-received condition with the oven door closed using a microwave leakage meter. A 275 mL water load was placed in the center of the oven and the oven was operated at maximum output power. There was no microwave leakage exceeding a power level of 0.1mW/cm 2 observed at any point 5 cm or more from the external surface of the oven. A maximum of 1.0 mW/cm 2 is allowed in accordance with the applicable Federal Standards. Hence, microwave leakage in the as-received condition with the oven door closed was below the maximum allowed. Shenzhen Accurate Technology Co., Ltd. Report No.: RA230625-36101E-EM-01 Version 27: 2023-01-30 Page 11 of 26 FCC-EMC For BLE/Wi-Fi Function: Calculated Formulary: Predication of MPE limit at a given distance S = 2 4R PG π S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) For worst case Mode Frequency (MHz) Antenna Gain Tune Up Conducted Power* Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric) (dBm) (mW) BLE 2402-2480 2.42 1.75 6.126 4.0983 20 0.0014 1 Wi-Fi 2412-2462 2.42 1.75 15.26 33.5738 20 0.0117 1 Note 1: Please refer to the certified module of FCC ID: VG8MWBWB01 (Report number: SET2021-15280& SET2021-15279) for the tune up conducted power for the BLE and Wi-Fi. Note 2: The BLE/Wi-Fi function can transmit at the same time with Microwave function. Note 3: Simultaneous transmitting was considerate to be compliant to the limit, since low power density for BLE/Wi-Fi and Microwave functions. To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 20cm from nearby persons. Result: Compliant.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Test Photos Page 1 of 2 Photo of Power Line Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: RA230625-36101E-EM-01 Test Photos Page 2 of 2 Radiated Emissions Test View (Below 1GHz) Radiated Emissions Test View (Above 1GHz)