VG8XM031MYY-PV5Microwave Oven

SAVE THESE INSTRUCTIONS CAREFULLY Read these instructions carefully before using your microwaveoven,a nd keep it carefully. If you follow the instructions, your oven will provide you with many years of good service. Model: EM031M2SD-PVH PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces. ( c) Do not operate the oven if it is damaged. It is particular important that the oven door close properly and that there is no damage to the: (1) DOOR (bent) (2) HINGES AND LATCHES (broken or loosened) (3) DOOR SEALS AND SEALING SURFACE (d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. open door S l y Specifications 2 WARNING - 1. Read all instructions before using the appliance. 2. Read and follow the specific: EXCESSIVE MICROWAVE ENERGY" found on page 2. combustible materials are placed inside the oven to facilitate cooking. only to properly grounded outlet. See found on page accordance with the provided installation instructions. To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: 3. This appliance must be grounded. Connect "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO "GROUNDING INSTRUCTIONS" 4. Install or locate this appliance only in 5. Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. 6. Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use. supervision is necessary when used by children. 7. As with any appliance, close damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. 8. Do not operate this appliance if it has a by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. 9. This appliance should be serviced only 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 1 . D o not immerse cord or plug in water.2 1 . Keep cord away from heated surface. 14. Do not let cord hang over edge of table or counter. 3 15. When cleaning surfaces of door and oven that comes together on closing the door, 16. To reduce the risk of fire in the oven cavity: 1). Do not overcook food. Carefully attend appliance when paper, plastic, or other 2). Remove wire twist-ties from paper or plastic bag before placing bag in oven. 3). If material inside of the oven ignite, keep oven door closed, turn oven off, and d isconnect the power cord, shut off power at the fuse or circuit breaker panel. 4). Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. point without appearing to be boiling. Vi sible bubbling or boiling when the container is removed from the microwave oven is not always present. 1 7. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling IMPORTANT SAFETY INSTRUCTIONS precautions should be followed, including When using electrical appliances basic safety f ollowing:the use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth. o r 4. 3 stand in the microwave oven for a short time before removing the container. spoon or other utensil into the co ntainer. This appliance must be grounded. In the event of an electrical short circuit, grounding of electric shock by providing an escape wire for the appliance is equipped with a cord having a plugged into an outlet that is properly installed and grounded. GROUNDING INSTRUCTIONS THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons: 1) Do not overheat the liquid. 2) Stir the liquid both before and halfway through heating it. 3) Do not use straight-sided containers with narrow necks. 4) After heating, allow the container to 5) Use extreme care when inserting a grounding wire with a grounding plug. reduces the risk electric current. This The plug WARNING - Improper use of the grounding can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely or if doubt exists as to whether the appliance is properly grounded. extension cord, use only a 3-wire extension cord that has a The marked rating of the extension cord shall be equal to or greater than the electrical appliance. understood, If it is necessary to use an 3-blade grounded plug, and 3-slot receptacle that will accept the plug on the appliance. rating of the Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. disassemble this appliance. DANGER - Do not Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded. WARNING - 1. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if care is exercised in their use. 3. If a long cord or extension cord is used: 1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. 2) The e…

Text truncated - open the document above for the full version.

Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 022311 – 6 Authority to Act as Agent Web Site: www.midea.com.cn E-Mail: [email protected] Date: 2021-3-18 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Jawen Yin from ECMG Electronic Technical Testing Corp (Shenzhen)._ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2021-9-17 By: _Xue wenfei__________ (Signature 1 ) (Print name) Title: _ Certification engineer _________________________ On behalf of: Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. (Company Name) Telephone: _86-757-2360 6480__________________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Web Site: www.midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, E-Mail: [email protected] Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 022311 – 6 Request for Confidentiality Date: 2021-5-17______ Subject: Confidentiality Request for: FCC ID: VG8XM031MYY-PV5 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant r equests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. Web Site: www.midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, E-Mail: [email protected] Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 022311 – 6 Sincerely, By: Xue wenfei______ (Signature/Title 4 ) (Print name) 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Rep ort No.: SET2021-04995 APPENDIX II: PHOTOGRAPHS OF PRODUCT PHOTO External Photo CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T

FCC Label: FCC Label Location:

Rep ort No.: SET2021-04995 Internal Photo CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T Rep ort No.: SET2021-04995 CCIC-SET/T

Report No.:SET2021-04995 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 1 of 22 EMC TEST REPORT Report No.: SET2021-04995 Product Name: Microwave Oven Trade Name: Midea Model No. : XM031MYY-PVH, XM031MYYY-PVH FCC ID : VG8XM031MYY-PV5 Applicant: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Received Date: 2021.04.07 Tested Date: 2021.04.07-2021.04.25 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building,No.43 Shahe Road,Xili Street, Nanshan District, Shenzhen, Guangdong, China Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: SET2021-04995 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 2 of 22 Test Report Product Name.....................:Microwave Oven Model No. ..........................:XM031MYY-PVH, XM031MYYY-PVH Trade name ...........................Midea Applicant ............................:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Applicant Address ..............: No.6, Yong An Road, Beijiao, Shunde, Foshan, China Manufacturer ......................:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Manufacturer Address ........:No.6, Yong An Road, Beijiao, Shunde, Foshan, China Test Standards ...................:47 CFR Part 18 Test Result..........................:PASS Tested by ..........................: 2021.04.25 Pei Sen Zhang Test Engineer Reviewed by .......................: 2021.04.25 Chris You Senior Engineer Approved by .......................: 2021.04.25 Shuangwen Zhang, Manager Report No.: SET2021-04995 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 3 of 22 TABLE OF CONTENTS 1.GENERAL INFORMATION ....................................................................................................5 1.1 GENERAL DESCRIPTION OF EUT ......................................................................................5 1.2 Test Standards and Results ........................................................................................................7 1.3 Facilities and Accreditations ......................................................................................................8 1.3.1 Facilities ....................................................................................................................................8 1.3.2 Measurement Uncertainty .........................................................................................................8 EQUIPMENTS LIST ............................................................................................................................9 2.EMC EMISSION TEST ...........................................................................................................10 2.1 Test Procedure...........................................................................................................................10 2.1.1 Frequency For Normal Voltage ...............................................................................................10 2.1.2 Frequency For Line Voltage ....................................................................................................10 2.1.3 Measurement data ................................................................................................................... 11 2.2 RADIATION HAZARD TEST................................................................................................ 11 2.2.1 Test Setup ................................................................................................................................ 11 2.2.2 Limit ........................................................................................................................................ 11 2.2.3 Test results ............................................................................................................................... 11 2.3 RF OUTPUT POWER MEASUREMENT ............................................................................12 2.3.1 Test Standard ...........................................................................................................................12 2.3.2 EUT Operating mode ..............................................................................................................12 2.3.3 Test Data..................................................................................................................................12 3.CONDUCTED EMISSION .....................................................................................................13 3.1.1 Conducted Emission Limit ......................................................................................................13 3.1.2 Test Procedure .........................................................................................................................13 3.1.3 Test Setup ................................................................................................................................13 4.RADIATED EMISSION ..........................................................................................................16 4.1.1 Radiated Emission Limits .......................................................................................................16 4.1.2 Test Setup ................................................................................................................................16 4.1.3 Test Procedure ..............................................................…

Text truncated - open the document above for the full version.

Report No.: SET2021-04995 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 21 of 22 APPENDIX I：PHOTOGRAPHS OF EMC TEST CONFIGURATION 1. Radiated Emission Measurement below 1GHz 2. Radiated Emission Measurement above 1GHz Report No.: SET2021-04995 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 22 of 22 3. Conducted emission at AC mains input/output port Measurement