VGZSEMSCE01Compact Fluorescent Lamp.

Instruction 1. Purpose Elegant’s CFL has implemented three phosphors together into one compact fluorescent. It is a new type of light resource of green environment. The product’s applications are practical for supermarkets, shopping centers, retail stores, and gymnasium. 2. Characteristics Elegant’s CFL provides instant start, long-life and high lumen output. The lamp is designed to perform up to the industry standards by using less electricity. Lamp can operate under -18 °C below zero degrees Celsius. From Elegant’s testing results shows the self ballast lamp only uses 20% of the electricity and it is compared and equivalent to a regular incandescent bulb. 3. Directions 1) For Safety purposes, the lamp fixture must be powered off before being installed, changed or being cleaned 2) This self ballast lamp cannot be operated with dimmer device. In order to keep the lamp’s high performance it should be used in defined voltage. 3) This Lamp can be performed under environmental areas in temperature from -18° C to 45° C, it cannot be used in enclosed fixture or wet areas. 4). Please check the power, voltage and contacts of the lamp incase the lamp performs abnormal signs such as the light blinking or the light turns off suddenly 5). Do not hold the tube by the hands while changing or cleaning the lamp. The proper way is to hold the lamp by the plastic housing. 4 Warnning This device complies with Part 18 of the FCC Rules. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45–30 MHz. If this occurs, please change outlet or move the lamp far away from other appliance. JIANGXI ELEGANT LIGHTING CO., LTD

Confidentiality Request ATTN: FEDERA COMMUNICATIONS COMMISSION FCC ID: VGZSEMSCE01 Pursuant to sections 0.457 and 0.459 of the commission’s rules, the applicant hereby requests confidential treatment of information accompanying with this application as outlined below: 1 - Circuit Diagram 2 – Block Diagram 3 – Operation Description 4 – Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rules 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant of this application. Sincerely! Applicant’s company name: JIANGXI ELEGANT LIGHTING CO., LTD Applicant’s company address: No.731 Xihou street,Guixi city,Jiangxi,China. Signature: Zhihua Zhang Date:2007-09-30

APPENDIX I FCC ID Label FCC ID: VGZSEMSCE01

APPENDIX II FCC ID Label Location FCC ID Label Location

APPENDIX IV Internal Photos EUT – Uncovered View (SCE-23W) EUT –Components View (SCE-23W) EUT–Solder View (SCE-23W) EUT – Uncovered View (SCE-20W) EUT –Components View (SCE-20W) EUT–Solder View (SCE-20W) EUT – Uncovered View (SEM-13W) EUT –Components View (SEM-13W) EUT–Solder View (SEM-13W) EUT – Uncovered View (SEM-9W) EUT –Components View (SEM-9W) EUT–Solder View (SEM-9W)

Note: The test report is specially limited to the above company and the product model only, it may not be duplicated without prior written consent of Best Test Service (Shenzhen) Co., Ltd. FCC PART 18 EMI MEASUREMENT AND TEST REPORT For JIANGXI ELEGANT LIGHTING CO., LTD No.731 Xihou street,Guixi city,Jiangxi,China FCC ID: VGZSEMSCE01 Product Name: CFL Model No: SCE-23W/SCE-20W/SEM-13W/SEM-9W Sample Received Date: Sep 07, 2007 Test Performed Date : Sep 08, 2007 Test Engineer: James Tsai Reviewed By: Chris Zeng Prepared By: BEST Test Service (Shenzhen) Co., Ltd Flat 11E, Xinhaofang Building, 11018, Shennan Road, Nanshan District, Shenzhen, 518057, China Tel: +86-755-86182350 Fax: +86-755-86182353 JIANGXI ELEGANT LIGHTING CO., LTD. FCCID: VGZSEMSCE01 Report # BTR07090801-1 Page 2 of 14 FCC Part18 Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION.............................................................................................................................................................4 SCHEMATICS / BLOCK DIAGRAM..................................................................................................................................4 EQUIPMENT MODIFICATIONS.......................................................................................................................................4 CONFIGURATION OF TEST SYSTEM..............................................................................................................................4 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................4 CONDUCTED EMISSIONS TEST DATA .................................................................................................................5 APPLICABLE STANDARD..............................................................................................................................................5 MEASUREMENT UNCERTAINTY....................................................................................................................................5 EUT SETUP.................................................................................................................................................................5 TEST EQUIPMENTS.......................................................................................................................................................6 TEST PROCEDURE........................................................................................................................................................6 SUMMARY OF TEST RESULTS.......................................................................................................................................6 CONDUCTED EMISSIONS TEST DATA AND PLOTS.........................................................................................................6 JIANGXI ELEGANT LIGHTING CO., LTD. FCCID: VGZSEMSCE01 Report # BTR07090801-1 Page 3 of 14 FCC Part18 Report GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The JIANGXI ELEGANT LIGHTING CO., LTD’s model SCE-23W/SCE-20W/SEM-13W/SEM-9Wor the “EUT” as referred to in this report are CFL, rated input voltage: AC 120V/60Hz. The test data was only good for the test sample. It may have deviation for other test sample. Objective The following test report is prepared on behalf of JIANGXI ELEGANT LIGHTING CO., LTD. in accordance with Part 2, Subpart J, and Part 18, Subparts A, B, and C of the Federal Communication Commissions rules and regulations. The objective of the manufacturer is to demonstrate compliance with FCC Part 18 limit requirements for Industrial, Scientific, and Medical Equipment. Related Submittal(s)/Grant(s) No Related Submittals. Test Methodology All measurements contained in this report were conducted with MP-5 1986, FCC Method of measurements of radio noise emission from Industrial, Scientific and Medical equipments. Test Facility All measurement facilities used to collect the data are located at Huatongwei Building , Keji Rd, 12 S, high-Tech Park, Nanshan District, Shenzhen, China. The sites are constructed in conformance with the requirements of ANSI C63.7/634 and CISPR 22, the site was accredited by FCC (662850), A2LA (2243.01) and CNAL (L1225) JIANGXI ELEGANT LIGHTING CO., LTD. FCCID: VGZSEMSCE01 Report # BTR07090801-1 Page 4 of 14 FCC Part18 Report SYSTEM TEST CONFIGURATION Justification The EUT was tested under normal mode as used by a common (typical) user. Schematics / Block Diagram N/A. Equipment Modifications No modifications were made by BEST TEST SERVICE (SHENZHEN) CO., LTD. to ensure the EUT to comply with the application limits and requirements. Configuration of Test System Test Setup Block Diagram 1.5 Meters E U T P o w e r C o rd E x te n s io n LISN1 Non-conducting table 80 cm above Ground Plane …

Text truncated - open the document above for the full version.

APPENDIX V Test Setup Photos Test Setup – Front View Test Setup – Side View