VKF-MASIFDM1Masimo Freedom Watch

DFS client device channel plan and software operational declaration Date: January 24, 2024 We, Masimo Corporation, declare that the device, FCC ID: VKF-MASIFDM1 Model Name: Freedom Watch, does not have Ad Hoc on “non-US frequencies” and/or on“ DFS frequencies“. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Below is the channel / frequency plan for the device 2.4G 5G band I 5G band II 5G band III 5G band IV Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 38 40 42 44 46 48 Frequency (MHz) 5180 5190 5200 5210 5220 5230 5240 Scan Type Active Active Active Active Active Active Active CH 52 54 56 58 60 62 64 Frequency (MHz) 5260 5270 5280 5290 5300 5310 5320 Scan Type Passive Passive Passive Passive Passive Passive Passive CH 100 102 104 106 108 110 112 116 118 120 122 Frequency (MHz) 5500 5510 5520 5530 5540 5550 5560 5580 5590 5600 5610 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 124 126 128 132 134 136 138 140 142 144 Frequency (MHz) 5620 5630 5640 5660 5670 5680 5690 5700 5710 5720 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 149 151 153 155 157 159 161 165 Frequency (MHz) 5745 5755 5765 5775 5785 5795 5805 5825 Scan Type Active Active Active Active Active Active Active Active Sincerely yours, ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Project Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

Date: January 2, 2024 FCC ID: VKF-MASIFDM1 FCC E-Label Information: 1. According to FCC rule part 2.925 (d) justification of using the alternative method of e-labeling for the product When etched on the surface, the labeling may cause damage or require very expensive techniques. 2. According to KDB 784748 D02 e labeling v02 section 4, for devices with an integrated electronic display, or those devices that only operate in conjunction with another associated product that has an electronic display, below info has been stated in e-label and/or user manual. A. User Steps to Access Information Starting from Main Menu: Step 1 – accessing “Settings” Step 2 – accessing “General” Step 3 – accessing “About” where applicable regulatory information is displayed B. Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. Instructions will be provided with the product at the time of purchase, in the user manual and packaging material. Readability of Regulatory Information Information on E-label In Manual FCC ID number V V FCC logo V 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) V Class A / B Digital Device user manual statements V Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment V Above info which displayed electronically is clearly legible no need to aid of magnification, please see below e-label screen. C. Regulatory Information must be Secure The regulatory information and dedicated exclusive application(s) or script(s) will be secured and implemented in a factory-set-unalterable format. The regulatory information will be capable of being retrieved and displayed locally and access by the end user. The info is no way to modify by end user. D. Physical and Temporary label for Purchasing and Importation Although the e-label has been used, below info will also on the product, or a label on the packaging, at the time of importation, marketing, and sales. 1. FCC ID 2. products subject to certification. E. Additional Considerations(Modular transmitters) Device is not a modular device. ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

Date: January 24, 2024 FCC ID: VKF-MASIFDM1 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Masimo Corporation certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Masimo Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Project Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Masimo Corporation FRN: 0016800161 Grantee Code: VKF Contact Name: Anamidevi Joshi Street Address: 52 Discovery, Irvine, City/Province/Zip: CA 92618 USA Telephone No: 949-297-7663 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: January 24, 2024 Signed by (printed name): Anamidevi Joshi

Date: January 24, 2024 FCC ID: VKF-MASIFDM1 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Part list Operational Description SDR Security Description Software Operational Description Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Project Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

Date: January 24, 2024 FCC ID: VKF-MASIFDM1 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Internal Photos Test Setup photos User’s manual Sincerely yours, ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Project Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

Date: 2024-04-12 Re: Supersede request for FCC ID: VKF-MASIFDM1; Granted on 03/17/2024 To Whom It May Concern: We, Masimo Corporation, would like to supersede the following affected exhibits in the table below due to a typo for the antenna manufacturer and adding supplementary test setup photos for NFC. The information has been revised accordingly to prevent any misunderstanding to the public. All changes are administrative in nature and does not affect any technical results originally reported. The superseded documents are listed as below: Exhibit Type Original Exhibit Name New Exhibit Name Page(s) Modified Test Report Antenna Test Report rev Antenna Test Report rev2 P3.4 Test Set Up Photos Test Set Up Photos (Antenna spec.) rev Test Set Up Photos (Antenna spec.) rev2 P.1 RF Exposure Info RF Exposure Info (SAR) RF Exposure Info (SAR) rev P.5 RF Exposure Info RF Exposure Info (SAR)_Appendix A-Z_1 rev RF Exposure Info (SAR)_Appendix A-Z_2 rev RF Exposure Info (SAR)_Appendix A-Z_3 rev RF Exposure Info (SAR)_Appendix A-Z_1 rev2 RF Exposure Info (SAR)_Appendix A-Z_2 rev2 Update footer report no. Test Set Up Photos Test Set Up Photos (SAR) Test Set Up Photos (SAR) rev Update footer report no. and photos for NFC If you have any questions, feel free to contact us. Thank you. Sincerely yours, ----------------------------------- Name: Anamidevi Joshi/ Title: EMC Project Manager Masimo Corporation Tel: 949-297-7663 Fax: 949-297-7199 E-mail: [email protected]

press the power button to open the main menu. 1. Select Setting 2. Select General 3. Select About, swipe up/down to view information

SAR Test Report Report Format Version 7.0.0 Page No. : 1 of 29 Report No. : SFBEDV-WTW-P23090682 R1 Issued Date : Apr. 09, 2024 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 SAR Test Report Report No. : SFBEDV-WTW-P23090682 R1 Applicant : Masimo Corporation Address : 52 Discovery, Irvine, CA 92618 USA Product : Masimo Freedom Health Watch FCC ID : VKF-MASIFDM1 Brand : Masimo MODEL NO. : Freedom Watch FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 941225 D05 v02r05 Sample Received Date : Sep. 28, 2023 Date of Testing : Dec. 07, 2023 ~ Dec. 18, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 7.0.0 Page No. : 2 of 29 Report No. : SFBEDV-WTW-P23090682 R1 Issued Date : Apr. 09, 2024 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3…

Text truncated - open the document above for the full version.

Plots of System Verification Page No. : 1 of 25 Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 2 of 25 Measurement Report S01 System Check_H1900_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D1900V2 – SN: 5d036 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 1900.000, 0 8.37 1.43 38.2 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Dec-07 EX3DV4 - SN7472, 2023-10-23 DAE4 Sn1590, 2023-09-14 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-12-07 2023-12-07 psSAR1g [W/kg] 2.05 2.05 psSAR10g [W/kg] 1.07 1.06 Power Drift [dB] 0.00 -0.01 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 3 of 25 Measurement Report S02 System Check_H1750_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D1750V2 – SN: 1055 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 1750.000, 0 9.0 1.34 38.5 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Dec-07 EX3DV4 - SN7472, 2023-10-23 DAE4 Sn1590, 2023-09-14 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-12-07 2023-12-07 psSAR1g [W/kg] 1.69 1.69 psSAR10g [W/kg] 0.906 0.892 Power Drift [dB] 0.00 -0.01 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 4 of 25 Measurement Report S03 System Check_H750_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D750V3 – SN: 1013 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 750.000, 0 10.35 0.898 40.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Dec-07 EX3DV4 - SN7472, 2023-10-23 DAE4 Sn1590, 2023-09-14 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-12-07 2023-12-07 psSAR1g [W/kg] 0.425 0.422 psSAR10g [W/kg] 0.283 0.276 Power Drift [dB] 0.01 0.01 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 5 of 25 Measurement Report S04 System Check_H750_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D750V3 – SN: 1013 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 750.000, 0 10.35 0.898 40.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Dec-07 EX3DV4 - SN7472, 2023-10-23 DAE4 Sn1590, 2023-09-14 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-12-07 2023-12-07 psSAR1g [W/kg] 0.425 0.422 psSAR10g [W/kg] 0.283 0.276 Power Drift [dB] 0.01 0.01 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 6 of 25 Measurement Report S05 System Check_H750_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D750V3 – SN: 1013 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 750.000, 0 10.35 0.898 40.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Dec-07 EX3DV4 - SN7472, 2023-10-23 DAE4 Sn1590, 2023-09-14 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-12-07 2023-12-07 psSAR1g [W/kg] 0.425 0.422 psSAR10g [W/kg] 0.283 0.276 Power Drift [dB] 0.01 0.01 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Plots of System Verification Page No. : 7 of 25 Measurement Report S06 System Check_H1750_231207 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, D1750V2 – SN: 1055 10.0 x 10.0 x 300.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity F…

Text truncated - open the document above for the full version.

Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024 Report No. : SFBEDV-WTW-P23090682 R1 Cancels and replaces the report No.: SFBEDV-WTW-P23090682 dated Jan. 26, 2024

Report No.: RFBEDV-WTW-P23090682-2 Page No. 1/ 24Report Format Version: 6.1.2 DFS Test Report Report No.:RFBEDV-WTW-P23090682-2 FCC ID:VKF-MASIFDM1 Model No.:Freedom Watch Received Date:2023/9/28 Test Date:2023/11/30 Issued Date:2024/1/25 Applicant:Masimo Corporation Address:52 Discovery, Irvine, CA 92618 USA Issued By:Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address:No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location:No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Desi gnation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of …

Text truncated - open the document above for the full version.