VKF-STORKBaby Sensor

User's Manual Masimo Stork™ 1 There may be information provided in this manual that is not relevant for your system. Do not operate Masimo Stork without completely reading and understanding these instructions. If you encounter any serious incident with product, please notify the competent authority in your country and the manufacturer. Wireless Radio: Contains FCC ID: 2AC7Z-ESP32SOLO1; FCC ID: VKF-CONNHUB TBD Contains IC: 21098-ESP32SOLO1; IC: 7362A-CONNHUB TBD Masimo Corporation 52 Discovery Irvine, CA 92618, USA Tel.: 949-297-7000 Fax.: 949-297-7001 www.masimo.com EU authorized representative for Masimo Corporation: MDSS GmbH Schiffgraben 41 D-30175 Hannover, Germany Patents: www.masimo.com/patents.htm Masimo® and ® are federally registered trademarks of Masimo Corporation. Masimo SafetyNet™ and Masimo Stork™ are trademarks of Masimo Corporation. All other trademarks and registered trademarks are property of their respective owners. © 2022 Masimo Corporation 3 Contents About This Manual ...................................................................................................................................................................... 4 Getting Started Guides........................................................................................................................................................ 4 In-App Videos ....................................................................................................................................................................... 4 Product Description and Intended Use ................................................................................................................................... 4 Product Description.............................................................................................................................................................. 4 Who the Device is intended to be used on (Indications for Use) ............................................................................... 5 Safety Information ........................................................................................................................................................................ 5 Safety Warnings ................................................................................................................................................................... 5 Performance Warnings ...................................................................................................................................................... 6 Cleaning and Service Warnings ....................................................................................................................................... 8 Compliance Warnings ........................................................................................................................................................ 9 Risks and Benefits ..................................................................................................................................................................... 11 Your Body and Oxygen .................................................................................................................................................... 11 Risks of Masimo Stork ...................................................................................................................................................... 11 Benefits of Masimo Stork.................................................................................................................................................. 12 Description................................................................................................................................................................................... 13 Masimo Stork System ....................................................................................................................................................... 13 Features ............................................................................................................................................................................... 13 Basic Setup and Use ................................................................................................................................................................ 17 Getting Started .................................................................................................................................................................... 17 Step 1: Smart Phone Setup ............................................................................................................................................. 17 Step 2: Masimo Stork System Setup ............................................................................................................................ 18 Step 3: View Live Data ...................................................................................................................................................... 25 Advanced Use ........................................................................................................................................................................... 31 4 Health Settings ................................................................................................................................................................... 31 Bottom Navigation ............................................................................................................................................................. 31 Troubleshooting ......................................................................................................................................................................... 33 Masimo Stork Messages ................................................................................................................................................. 33 Troubleshooting Masimo …

Text truncated - open the document above for the full version.

TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: section 2.911(d)(7) filing To whom it may concern, This letter is to confirm that Anamidevi Joshi has accepted responsibility to act as the agent for service of process as acknowledged by the applicant, Masimo Corporation. Anamidevi Joshi confirms he is not associated with or part of any TCB or test lab. U.S. Agent: Anamidevi Joshi Title: EMC Project Manager Company Name: Masimo Corporation Address: Masimo, 52 Discovery, Irvine, California, U.S.A. 92618 Telephone No: +1 (949) 297-7663 Email: [email protected] FRN (FCC Registration Number): 0016800161 The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Signature of Applicant (must be signed by the contact of record in the FCC database for the applicant grantee code): Signature of U.S. Agent (if different from applicant): Name: Anamidevi Joshi Name: Date: Feb 27, 2023 Date:

Attestation Statement -FCC Date: 28 Feb 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Attestation regarding ‘covered’ equipment and the Covered List FCC ID: VKF-STORK To whom it may concern, Per 2.911(d)(5)(i), Masimo Corporation certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5)(ii), Masimo Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Name: Anamidevi Joshi Job Title: EMC Project Manager

Cover letter for FCC application Masimo Corporation is submitting the Baby Sensor for FCC original certification. Baby Sensor has Bluetooth Low Energy radio that utilizes Apollo4 Blue Plus AMA4B2KP-KBR with PCB trace antenna. Baby Sensor pairs up with Air Home Hub using NFC passive tag to establish communication over Bluetooth Low Energy. NFC is used only for pairing the Air Home Hub with Baby Sensor. After pairing, BLE communication is established. NFC radio and BLE radio do not transmit at the same time. Baby Sensor has been tested to 47 CFR § FCC 15.247. Its FCC ID is VKF-STORK. Baby Sensor is called known as Masimo Sensor. Respectfully, Anamidevi Joshi EMC Project Manager Masimo Corporation

Request for Confidentiality Letter-FCC Date: 12/26/2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request for confidentiality FCC ID: VKF-STORK To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459 and 0.457(d) the documents listed below and attached with this application for certification be provided with confidential status.  Schematics.pdf  Operational Description.pdf  Frequency Block Diagrams.pdf Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Anamidevi Joshi EMC Project Manager Masimo Corporation

Baby Sensor’s front view Baby Sensor’s back view Baby Sensor’s right view Baby Sensor’s left view Baby Sensor’s top view Baby Sensor’s bottom view Charging Cradle Charging Cradle Charge port

Label, Stork Sensor Certication Graphics, Laser Etch SUB-1521 Revision: B CO-094540 12/22 (01)00843997003780 (11)221201 (10)YYMXX Stork Sensor Masimo Corporation FCC ID: VKF-STORK IC: 7362A-STORK

Photo 1: Internal view of Baby sensor with the lid removed Photo 2: Internal view of Baby sensor with the battery removed Chip, Photodiode Baby Sensor V2 Flex Cable Assembly Transponder, NFC Battery, Stork Sensor, LiPo, 3.85V, 125mAh Photo of back side of Housing, Top Shell, Baby Sensor Photo 3: Internal view of Baby sensor with the battery and the board removed Photo 4: Front view of PCB p/n: 29224 RF path to the antenna indicated by yellow line Photo 5: Assembly of front view of circuit board 29224 (p/n: 303870) U9 L1 Y2 U1 U5 U12 Antenna J2 Photo 6: Back view of PCB p/n: 29224 Photo 7: Assembly of back view of circuit board 29224 (p/n: 303870) Photo 8: Front view of battery Photo 9: Back view of battery

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Masimo Corporation PCB Antenna Antenna Pattern Measurements Report: MASI0856.0 Rev. 1, Issue Date: January 12, 2023 Approved by: Johnny Candelas, Operations Manager REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Included Reference Antenna Plots 2023-01-11 17-18 Revised comments in Polar Plots 2023-01-11 8-19 Report No. MASI0856.0 Rev. 12/22 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. MASI0856.0 Rev. 13/22 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. MASI0856.0 Rev. 14/22 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment under Test (EUT) Information Company Name: Masimo Corporation Address: 52 Discovery City, State, Zip: Irvine, CA 92618 Test Requested By: Anami Joshi EUT: PCB Antenna First Date of Test: November 23, 2023 Last Date of Test: November 23, 2023 Receipt Date of Samples: November 23, 2023 Equipment Design Stage: Production Equipment Condition: No Damage Purchase Authorization: Verified Information Provided by the Party Requesting the Test Functional Description of the EUT: PCB Antenna Testing Objective: To obtain 2D antenna pattern measurements and calculated antenna performance values. Report No. MASI0856.0 Rev. 15/22 CONFIGURATIONS 2018-07-17 Configuration MASI0846- 1 EUT Description Manufacturer Model/Part Number Serial Number Baby Sensor Masimo Corporation None Specified 09 Report No. MASI0856.0 Rev. 16/22 MODIFICATIONS 2018-07-17 Equipment Modifications Item Date Test Modification Note Disposition of EUT 1 2022-11-23 2D Polar Plots Tested as delivered to Test Station. No EMI suppression devices were added or modified during this test. Scheduled testing was completed. Report No. MASI0856.0 Rev. 17/22 2D POLAR PLOTS PSA-ESCI 2022.08.23.0 description PSA-ESCI 2022.08.23.0 MODES OF OPERATION Continuously Transmitting: Low channel, 2402 MHz, CW Continuously Transmitting: Mid channel, 2440 MHz, CW Continuously Transmitting: High channel, 2480 MHz, CW CONFIGURATIONS INVESTIGATED MASI0846 - 1 FREQUENCY RANGE INVESTIGATED Start Frequency2402 MHzStop Frequency2480 MHz SAMPLE CALCULATIONS Max Absolute Gain of AUT = G_ref - (E_ref - E_aut) + L_c Where: G_ref = gain of reference antenna (dBi)E_ref = electric field strength in dBuV/m E_aut = electric field strength in dBuV/mL_c = AUT setup loss TEST EQUIPMENT ID OCJ AFJ AIR TGU TKU AHE TEST DESCRIPTION AttenuatorFairview MicrowaveSA18H-062022-01-182023-01-18 Antenna - Double RidgeEMCO31152022-09-012024-09-01 Antenna - Double RidgeETS Lindgren31152022-07-192024-07-19 Generator - Signal Agilent E8257D2020-11-032023-11-03 CableNorthwest EMC 1-8GHz RE Cable 2022-02-092023-02-09 Analyzer - Spectrum AnalyzerAgilentN9010A2022-01-122023-01-12 Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. The test data represents the configuration / operating mode/ model that produced the highest emission levels as compared to the specification limit. Descripti…

Text truncated - open the document above for the full version.

Antenna Info Baby sensor use below antenna – Item Radio Type Manufacturer Model Number Peak Gain (dBi) Description 1 Bluetooth Low Energy N/A N/A -1.83 Printed inverted-F antenna Printed Inverted- F BT Antenna size demonstrated Figure 1: Bluetooth antenna located within the PCB Figure 2: Assembly drawing of Radius PPG reusable chip showing item # 3 that has Bluetooth antenna located within the outer housing indicated by item #1. The antenna is permanently attached and is non-replaceable. Figure 3: F-type antenna demonstatrated Figure 4: Other side of the chip

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Masimo Corporation Baby Sensor FCC 1.1307:2023 Bluetooth Low Energy Report: MASI0841.0, Issue Date: February 3, 2023 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: January 6, 2023 Masimo Corporation EUT: Baby Sensor RF Exposure Evaluation Standards Specification Method FCC 1.1307:2023 FCC 1.1307:2023 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. MASI08412/11 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. MASI08413/11 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. MASI08414/11 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. MASI08415/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: Masimo Corporation Address: 52 Discovery City, State, Zip: Irvine, CA 92618 Evaluation Requested By: Anami Joshi EUT: Baby Sensor Date of Evaluation: 1/6/2023 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: Baby Sensor (FCC ID: VKF-STORK) is a wireless, wearable sensor, worn on the baby's foot, that provides the physiological data. Objective: To demonstrate compliance with FCC Requirements for RF exposure for 1.1307 RF exempt devices Report No. MASI08416/11 RF EXPOSURE CONDITION 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Portable Location on Body (if applicable) Limb How is the Device Used The Baby Sensor is used less than 20 cm from the baby it is worn on the baby's foot. Radios Contained in the Same Host Device Bluetooth Low Energy Simultaneous Transmitting Radios None Body Worn Accessories Baby Sensor Environment General Population/Uncontrolled Exposure Report No. MASI08417/11 EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2022.07.12.0 OVERVIEW With respect to the limits on human exposure to RF emissions provided in 47 CFR §1.1310, if equipment can be shown to qualify for an exemption pursuant to 47 CFR §1.1307(b)(3), an evaluation is not required. COMPLIANCE WITH FCC 1.1310 Per 1.1307(b)(3), (i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in par…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Masimo Corporation Baby Sensor FCC 15.247:2022; RSS-247 Issue 2:2017 Bluetooth Low Energy Radio Report: MASI0841.2 Rev. 1, Issue Date: January 8, 2023 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: November 17, 2022 Masimo Corporation EUT: Baby Sensor Radio Equipment Testing Standards Specification Method FCC 15.207:2022 ANSI C63.10:2013 FCC 15.247:2022 RSS-247 Issue 2:2017, RSS-Gen Issue 5:2018+A1:2019+A2:2021 Results Test Description Result FCC Section(s) RSS Section(s) ANSI C63.10 Section(s) Comments Powerline Conducted Emissions Pass 15.207 RSS-Gen 8.8 6.2 Occupied Bandwidth (99%) Pass KDB 558074 -2.1 RSS-Gen 6.7 6.9.3 Duty Cycle Pass KDB 558074 -6.0 RSS-Gen 3.2 11.6 DTS Bandwidth (6 dB) Pass 15.247(a)(2), KDB 558074 -8.2 RSS-247 5.2(a) 11.8.2 Equivalent Isotropic Radiated Power Pass 15.247(b)(3), KDB 558074 -8.3.1 RSS-247 5.4(d, f), RSS- Gen 6.12 11.9.1.1 Output Power Pass 15.247(b)(3), KDB 558074 -8.3.1 RSS-247 5.4(d, f), RSS- Gen 6.12 11.9.1.1 Power Spectral Density Pass 15.247(e), KDB 558074 -8.4 RSS-247 5.2(b) 11.10.2 Band Edge Compliance Pass 15.247(d), KDB 558074 -8.5 RSS-247 5.5 11.11 Spurious Conducted Emissions Pass 15.247(d), KDB 558074 -8.5 RSS-247 5.5 11.11 Spurious Radiated Emissions Pass 15.247(d), KDB 558074 - 8.6, 8.7 RSS-247 5.5, RSS-Gen 6.13, 8.10 11.12.1, 11.13.2, 6.5, 6.6 Deviations From Test Standards None Approved By: Johnny Candelas, Operations Manager Report No. MASI0841.2 Rev. 12/57 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Updated Power Settings with client information 2023-01-08 11 Removed TOC page for the Duty Cycle module since the EUT is operating at 100% duty cycle. 2023-01-08 N/A Added 30-1000 MHz test equipment. 2023-01-08 54 Replaced with correct captures 2023-01-08 30, 34 Test Description changed to peak one. 2023-01-08 36 Test Description revised to match how test was ran. 2023-01-08 43-49 added missing equipment 2023-01-08 50 Report No. MASI0841.2 Rev. 13/57 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. MASI0841.2 Rev. 14/57 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. MASI0841.2 Rev. 15/57 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the m…

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0 POWERLINE CONDUCTED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0 XMit 2022.02.07.0 Direct Connect (1).JPG Direct Connect (2).JPG DIRECT CONNECT SPURIOUS RADIATED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0 SPURIOUS RADIATED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0 SPURIOUS RADIATED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0 SPURIOUS RADIATED EMISSIONS WTD.2022.07.28.0 EmiR5 2022.07.06.0 PSA-ESCI 2022.08.23.0