VLJ-F50TTRAVELFENCE50TU

User’s Guide WIRELESS FENCE PET TRAINING SYSTEM Model: TRAVELFENCE50 The features described in this User's Guide are subject to modifications without prior notice. Welcome... to your new WIRELESS FENCE PET TRAINING SYSTEM Thank you for purchasing the Wireless Fence Pet Training System. Your new Wireless Fence will provide years of freedom, convenience and safety for your dog while traveling away from home. First, be sure to install the Wireless Fence Pet Training System in a portion of your yard at home and teach your dog how to obey the invisible boundary zone before using in other locations. The purpose of the training steps on page 32 is to teach your dog how to avoid correction by respecting the warning beep and backing inside the boundary zone. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions, please call: This User's Guide provides you with all the information you need to get the most from the product. Please read and follow the instructions in this User’s Guide along with the Safety Instructions on page 10 before you using this product. Got everything? • 1 x Pet Collar Unit and Collar Strap • 1 x Wireless Fence Unit • 1 x Remote Control Unit • 1 x Power Adapter (For Pet Collar Unit) • 1 x Power Adapter (For Wireless Fence Unit) • 1 x Rechargeable Battery Pack (for Wireless Fence Unit) • 1 x Outdoor Stake and Ground Plug • 50 x Boundary Flags • 1 x Test Light for Collar Contacts • 2 Pairs of Collar Contacts - Long & Short (For Pet Collar Unit) • 1x Travel Carry Bag US and Canada 1-888-331-3383 Email: [email protected] Overview of the Pet Collar Unit 1.Pair Key 2.Power Key Press and hold to turn the unit On. The unit vibrates once and the indicator LED lights up in green for 3 seconds. Press and hold to turn the unit Off. The unit vibrates twice and the indicator LED goes off. 3.Collar Contacts 4.Power Adapter Socket 5.Indicator LED Lights up in green for 3 seconds when the unit is powered on and flashes slowly during standby. Lights up in green when delivering static correction. 6.Charging/Battery low LED Lights up in blue when charging. Flashes in red when battery is low. 7.Speaker Delivers tone or voice sent from the Remote Control Unit. 1 2 3 7 5 6 4 Overview of the Wireless Fence Unit and Outdoor Stake 1.Power Key Press and hold to power on the unit. Press and hold to power off the unit. When the unit is powered on, short press to turn fencing mode on or off. 2.Left Key Correction Mode: Decrease level Menu Mode: Move down 3.Right Key Correction Mode: Increase level Menu Mode: Move up 4.Menu Key Press to access menu options. Press again to exit. 5.OK Key Press to select the desired option and lock the setting. 6.Outdoor Stake Connect to the Wireless Fence Unit when using it outdoors. 7.Ground Plug Pound into the ground when using it outdoors. 1 2 4 5 3 6 7 Overview of the Remote Control Unit 1.Display (LCD screen) 2.OK Key Press to select the desired option and lock the setting. 3.Menu Key Press to access menu options, such as pairing, remove collar, etc. 4.Up Key Correction Mode: Increase level Menu Mode: Move up 5.Down Key Correction Mode: Decrease level Menu Mode: Move down 6.To n e K e y Press to send a tone to the Pet Collar Unit. 7.Vibration Key Press to vibrate the Pet Collar Unit. 8.Static Correction Key Press and hold to send static correction to the Pet Collar Unit. 9.Microphone 10.Antenna 11.Ta l k k e y Press and hold to convey verbal commands to your dog through the Pet Collar Unit. 12.Power Key Press and hold to power the unit ON/OFF. 13.Battery Cover 14.Leash Clip OK 2 3 6 7 8 1 4 5 9 11 10 12 13 14 Symbols on the Remote Control and Wireless Fence Unit RF signal strength of the Remote Control Unit against the Pet Collar Unit. Displays when you enter Menu mode. Alert indication on Collar 2 (battery low, out of range, etc). Displays when Fencing mode is activated. Battery level on the Remote Control Unit. Pet Collar Number. Select to REMOVE collar. Select to PAIR collar. Displays when STATIC CORRECTION KEY is pressed (Level 0 to 15). When 0 is displayed, only tone and vibration alerts are sent to the Pet Collar Unit. Displays when TALK KEY is pressed. Displays when VIBRATION KEY is pressed. Displays when TONE KEY is pressed. How the Wireless Fence Pet Training System works The Wireless Fence Pet Training System comes with a portable Wireless Fence Unit that establishes an invisible boundary by transmitting radio signals to the Pet Collar Unit up to a distance of 50 yards line of sight. When your dog reaches the boundary zone (about 2 to 3 feet before the “real” boundary), the Pet Collar Unit that is worn on your dog emits a warning beep followed by static correction to get its attention until it backs away from the boundary zone. The Pet Collar Unit is equipped with a safety feature such that it will stop delivering static correction if your dog stays outside the boundary for more than 30 seconds.The boundary zone can be marked with Boundary Flags as a visual aid for your dog, especially during the training stage. The Wireless Fence Pet Training System also comes with a Remote Control Unit that is paired with the Pet Collar Unit. At the push of the STATIC CORRECTION KEY on the Remote Control Unit, a signal is sent to the Pet Collar Unit, which delivers static correction to your dog to discourage your dog from certain behaviors. The Remote Control Unit is also designed with a TONE KEY , a VIBRATION KEY and a TALK KEY that allows you to give your dog verbal commands through the Pet Collar Unit. Important guidelines when using the Wireless Fence Pet Training System • Included in your Wireless Fence Pet Training System are Collar Contacts in three different lengths (short, medium and long) that deliver static correction to your d…

Text truncated - open the document above for the full version.

Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Hong Kong Tel: (852) 2802 7388 Fax: (852) 2802 8138 _______________________________________ . DATE : 27 Sep 2014 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint NEMKO Shenzhen Daria Liu; Unit CD, Floor 10, Tower 2, Kefa Road 8#, Hi-Technology Park, Nanshan District, Shanzhen, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Binatone Electronics International Ltd., Floor 23A, 9 Des Voeux Road West, Seung Wan, Hong Kong, China. Dated this 27 September 2014 Agency agreement expiration date: Usually Give 8 - 12 Months By: Karl Heinz Mueller Signature Printed Title: Chief Technical Officer On behalf of : Binatone Electronics International Ltd Telephone: 28027388

Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Hong Kong Tel: (852) 2802 7388 Fax: (852) 2802 8138 _______________________________________ . DATE : 27 Sep 2014 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:VLJ-F50T Product Name: TRAVELFENCE50TU Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 27 September 2014 Agency agreement expiration date: Usually Give 8 - 12 Months By: Karl Heinz Mueller Signature Printed Title: Chief Technical Officer On behalf of : Binatone Electronics International Ltd Telephone: 28027388

Worldwide Testing and Certification EUT photo -details- Figure 1 EUT External Photo Figure 2 EUT External Photo Worldwide Testing and Certification Figure 3 EUT External Photo Figure 4 EUT External Photo Worldwide Testing and Certification Figure 5 EUT External Photo Figure 6 EUT External Photo

Worldwide Testing and Certification EUT photo -details- Figure 1 EUT Internal Photo Figure 2 EUT Internal Photo Worldwide Testing and Certification Figure 3 EUT Internal Photo Figure 4 EUT Internal Photo Worldwide Testing and Certification Figure 5 EUT Internal Photo Figure 6 EUT Internal Photo

PartType RefDes PartDecal Pins Layer Orient. X Y SMD Glued ANT ‐ CON1 ATN1 ANT ‐ CON1 1 Top 0 ‐ 9.6 112.45 No No WE748422245 BA1 WE748422245 6 Top 270 ‐ 8.9 45.3 Yes No WE748422245 BA2 WE748422245 6 Top 270 ‐ 5.55 49.15 Yes No TEST ‐ PAD ‐ 1.5MM BAT+ TEST ‐ PAD ‐ 1.5MML 1 Top 0 ‐ 3.85 115.95 No No TEST ‐ PAD ‐ 1.5MM BAT ‐ TEST ‐ PAD ‐ 1.5MML 1 Top 0 8.15 115.9 No No TEST ‐ PAD ‐ 1.5MM BL ‐ TEST ‐ PAD ‐ 1.5MM 1 Top 0 0 0 Yes No TACH ‐ SWITCH BUZ SWI ‐ 4X6MM 4 Bottom 180 2.15 50.25 Yes No BUZZER1 BUZZER CON5.0X2B 2 Bottom 90 2.25 9.55 No No TEST ‐ PAD ‐ 1.5MM BZ1 TEST ‐ PAD ‐ 1.5MM 1 Top 0 1 19.1 Yes No TEST ‐ PAD ‐ 1.5MM BZ2 TEST ‐ PAD ‐ 1.5MM 1 Top 0 3.2 10.75 Yes No CAPSMT C1 C ‐ 0603A 2 Top 0 8.65 65.55 Yes No CAPSMT C2 C ‐ 0402 2 Top 0 ‐ 11.2 45.15 Yes No CAPSMT C3 C ‐ 0402 2 Top 90 12.7 15.55 Yes No CAPSMT C4 C ‐ 0402 2 Top 270 ‐ 10.1 33.1 Yes No CAPSMT C5 C ‐ 0402 2 Top 270 ‐ 9.1 33.1 Yes No CAPSMT C6 C ‐ 0402 2 Top 180 ‐ 1.75 44.25 Yes No CAPSMT C7 C ‐ 0402 2 Top 90 8.1 0 Yes No CAPSMT C8 C ‐ 0402 2 Top 90 8.85 5.9 Yes No CAPSMT C9 C ‐ 0402 2 Top 180 ‐ 13 41.15 Yes No CAPSMT C10 C ‐ 0402 ‐ 02 2 Top 90 ‐ 9.45 107.5 Yes No CAPSMT C11 C ‐ 0402 2 Top 180 ‐ 13.65 32.9 Yes No CAPSMT C12 C ‐ 0603A 2 Bottom 90 ‐ 10.8 55.55 Yes No CAPSMT C13 C ‐ 0402 2 Top 0 ‐ 1.7 40.95 Yes No CAPSMT C14 C ‐ 0402 2 Top 270 ‐ 11.1 33.1 Yes No CAPSMT C15 C ‐ 0402 2 Top 90 ‐ 12.1 43.6 Yes No CAPSMT C16 C ‐ 0402 2 Top 180 ‐ 1.55 36.05 Yes No CAPSMT C18 C ‐ 0603A 2 Bottom 0 ‐ 13.65 53.9 Yes No CAPSMT C19 C ‐ 0402 ‐ 02 2 Bottom 180 ‐ 12 58.6 Yes No CAPSMT C20 C ‐ 0402 2 Top 270 ‐ 13.7 54.6 Yes No CAPSMT C21 C ‐ 0402 2 Top 180 ‐ 1.5 34.1 Yes No CAPSMT C22 C ‐ 0402 2 Top 180 ‐ 1.55 35.05 Yes No CAPSMT C23 C ‐ 0402 2 Top 90 ‐ 11.05 43.55 Yes No E ‐ CAP ‐ TAM C24 E ‐ CAP ‐ TAM 2 Top 180 8.15 25.5 Yes No CAPSMT C26 C ‐ 0402 2 Top 0 ‐ 1.7 39.9 Yes No CAPSMT C27 C ‐ 0402 2 Top 270 ‐ 1.25 21.5 Yes No CAP ‐ E C28 ECAP ‐ SMT ‐ 6X7 2 Top 90 ‐ 11.7 26.8 Yes No CAPSMT C29 C ‐ 0402 2 Top 90 8 2.3 Yes No CAPSMT C30 C ‐ 0402 2 Top 90 6.1 0.05 Yes No CAPSMT C31 C ‐ 0402 2 Top 90 8.8 8.4 Yes No CAPSMT C32 C ‐ 0603A 2 Top 0 6.25 4 Yes No CAPSMT C33 C ‐ 0402 2 Top 90 12.3 10.6 Yes No CAPSMT C34 C ‐ 0402 2 Top 180 5.1 9 Yes No CAPSMT C35 C1206 ‐ 01 2 Top 180 7.6 12.5 Yes No CAP ‐ SMT ‐ A C36 C ‐ 0402 2 Top 270 16.55 47.25 Yes No CAPSMT C37 C ‐ 0402 2 Top 270 4.1 22.45 Yes No CAPSMT C38 C ‐ 0402 2 Top 90 1.1 24.95 Yes No CAPSMT C39 C ‐ 0402 2 Top 90 13.45 38 Yes No CAPSMT C40 C ‐ 0402 2 Top 180 ‐ 7.2 16.6 Yes No CAPSMT C41 C ‐ 0402 2 Top 90 14.6 10.55 Yes No CAPSMT C42 C ‐ 0402 2 Top 90 5.1 0 Yes No CAPSMT C43 C1206 ‐ 01 2 Top 90 ‐ 1.15 26.6 Yes No CAPSMT C44 C ‐ 0402 2 Top 270 ‐ 11.2 55.15 Yes No CAP ‐ E C45 ECAP ‐ SMT ‐ 6X7 2 Top 180 ‐ 11.75 4.8 Yes No CAPSMT C46 C ‐ 0402 2 Top 90 9.05 ‐ 0.05 Yes No CAPSMT C47 C ‐ 0402 2 Top 0 11.9 38.35 Yes No CAPSMT C48 C ‐ 0402 2 Top 180 10.65 5.45 Yes No CAPSMT C49 C1206 ‐ 01 2 Top 270 14.35 33.5 Yes No CAPSMT C50 C ‐ 0402 2 Top 0 15 49.55 Yes No CAPSMT C51 C ‐ 0402 2 Top 270 4.5 39.5 Yes No CAPSMT C52 C ‐ 0402 2 Top 270 6.85 51.1 Yes No CAPSMT C53 C ‐ 0603A 2 Top 270 5.7 40.1 Yes No CAPSMT C54 C ‐ 0402 2 Top 0 ‐ 13.5 38.2 Yes No CAPSMT C55 C ‐ 0402 2 Top 180 ‐ 1.7 42.05 Yes No CAPSMT C56 C ‐ 0402 2 Top 270 9.25 35.55 Yes No CAPSMT C57 C ‐ 0402 2 Top 270 10.45 35.5 Yes No CAPSMT C58 C ‐ 0402 2 Top 270 11.8 35.5 Yes No CAPSMT C59 C ‐ 0402 2 Top 90 5.1 28.75 Yes No CAPSMT C60 C ‐ 0402 ‐ 02 2 Top 180 ‐ 13.3 52.15 Yes No CAPSMT C61 C ‐ 0402 2 Top 180 ‐ 1.55 37.1 Yes No CAPSMT C62 C ‐ 0402 ‐ 02 2 Top 90 ‐ 11.05 50 Yes No CAPSMT C63 C ‐ 0402 2 Top 270 2.95 22.45 Yes No CAPSMT C64 C ‐ 0402 2 Top 180 16.1 45.2 Yes No CAPSMT C65 C ‐ 0402 ‐ 02 2 Top 90 ‐ 9.25 55 Yes No CAPSMT C66 C ‐ 0402 ‐ 02 2 Top 270 ‐ 5.6 54.8 Yes No CAP ‐ SMT ‐ A C67 C ‐ 0603A 2 Top 180 2.7 55.3 Yes No CAPSMT C68 C ‐ 0402 2 Top 180 ‐ 1.75 43.15 Yes No CAPSMT C69 C ‐ 0402 2 Top 0 ‐ 9.55 57.65 Yes No CAPSMT C70 C ‐ 0402 2 Top 180 8.7 27.6 Yes No CAPSMT C71 C ‐ 0402 2 Top 90 2.3 12.1 Yes No CAPSMT C73 C ‐ 0402 2 Top 0 ‐ 5.05 57.6 Yes No CAPSMT C75 C ‐ 0402 2 Top 180 ‐ 12.5 46.15 Yes No CAPSMT C76 C ‐ 0402 ‐ 02 2 Top 270 ‐ 5.1 47.2 Yes No CAPSMT C77 C ‐ 0402 ‐ 02 2 Top 180 ‐ 9.95 108.85 Yes No CAPSMT C78 C ‐ 0402 2 Bottom 90 ‐ 11.65 52.55 Yes No CAPSMT C80 C ‐ 0402 ‐ 02 2 Top 270 ‐ 6.35 47.1 Yes No CAPSMT C86 C ‐ 0402 2 Top 180 ‐ 2.5 13.05 Yes No CAP ‐ E CC1 ECAP ‐ SMT ‐ 6X7 2 Top 270 7.75 12.55 Yes No CAP ‐ E CC26 ECAP ‐ SMT ‐ 6X7 2 Top 180 ‐ 11.75 12.9 Yes No DIODE D2 DIO ‐ 1206A 2 Top 180 ‐ 6.2 22 Yes No BAT70 D14 SOT23 3 Top 180 3.25 25.85 Yes No TACH ‐ SWITCH DOWN SWI ‐ 4X6MM 4 Bottom 90 ‐ 2.7 62.7 Yes No 100_48 IC2 100_48 48 Top 90 9.3 44.65 Yes No CON_1 J1 CON_1 1 Top 270 ‐ 15.35 43.75 No No BATTERY J2 BATA 2 Top 90 ‐ 5.25 4.9 No No CON_1 J3 CON_1 1 Top 0 ‐ 9.55 58.85 No No CON_1 J4 CON_1 1 Top 270 0.05 43.75 No No CON_1 J5 CON_1A 1 Top 0 ‐ 7.3 31.3 No No CON ‐ 1 ‐ 1 J7 CON1_A 1 Top 0 ‐ 7 111.3 Yes No CON2.0X5 J10 CON2.2X5 5 Top 90 9.25 88.25 Yes No INDUCTOR0603 L1 R0603 ‐ 02 2 Bottom 0 ‐ 13.4 52.65 Yes No INDUCTOR0603 L2 R0603 ‐ 02 2 Top 90 ‐ 2.1 46.15 Yes No IND ‐ 0402 L7 SMD ‐ L4.5 2 Top 90 ‐ 14.7 20.75 Yes No INDUCTOR0603 L8 R0402 ‐ 02 2 Top 270 ‐ 12.65 54.55 Yes No BF2520 L9 BF2520 ‐ 02 4 Top 90 ‐ 5.55 52.1 Yes No INDUCTOR0603 L13 R0402 ‐ 02 2 Top 180 ‐ 8.65 43.85 Yes No INDUCTOR0603 L14 R0402 ‐ 02 2 Top 180 ‐ 5.75 43.95 Yes No INDUCTOR0603 L15 R0402 ‐ 02 2 Top 270 ‐ 6.3 45.25 Yes No INDUCTOR0603 L16 R0402 ‐ 02 2 Top 270 ‐ 5.15 45.3 Yes No QFG8847B LCD1 QFG8847B 21 Bottom 90 ‐ 13.6 80 No No MICROPHONE M1 MIC ‐ 4.5MMA 2 Bottom 270 2.75 1.35 No No TACH ‐ SWITCH MENU SWI ‐ 4X6MM 4 Bottom 270 6.95 62.75 Yes No TEST ‐ PAD ‐ 1.5MM NRST TEST ‐ PAD ‐ 1.5MMC 1 Top 0 9.25 99.3 Yes No TACH ‐ SWITCH OK SWI ‐ 4X6MM 4 Bottom 270 7 72.4 Yes No QM2409K Q1 QM2409K 3 Top 0 2.2 52.7 Yes No PNP_SOT23 Q2 PNP_SOT23 3 Top 90 10.85 17.4 Yes No 2N7000 Q3 2N7000 3 Top 0 ‐ 6.9 19.3 Yes No QM2409K Q4 QM2409K 3 Top 0 17.55 107.5 Yes No PNP_SOT23 Q7 PNP_S…

Text truncated - open the document above for the full version.

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: [2441 MHz 12.11dBm（16.255mW） output power] (16.255mW /5mm) ·[√2.441 (GHz)]= 5.14 <7.5 for 10-g SAR Then SAR evaluation is not required

FCC ID:VLJ-F50T Reference No.:270658 FCC Test Report FCC EVALUATION REPORT FOR CERTIFICATE Project Reference No. 270658 Product Remote Training System Brand Name Model TRAVELFENCE50TU Alternate Model / Tested according to FCC Rules and Regulations Part 15 Subpart C 2013, 15.247 ANSI C63.4-2009 Tested in period 2014-10-26 to 2014-10-30 Issued date 2014-10-31 Name and address of the Test House Nemko Shanghai Ltd. Shenzhen Branch Unit CD, Floor 10, Tower 2, Financial base, Kefa Road 8#, Hi-Technology Park, Nanshan District, Shenzhen, China Phone : +86 755 8221 0420 Fax : +86 755 8221 3363 Tested by 2014-10-31 Zone Peng date Verified by 2014-11-05 Daria Liu date This form is only for use by Nemko, or by others according to special agreement with Nemko. The report may be reproduced infull. Partial reproduction may only be made with the written content of Nemko Hongkong. This report applies only to the sample(s) tested. It is the manufacturer’s responsibility to assure the additional production units of this product are manufactured with identical electrical and mechanical components. Binatone Electronics International Ltd Page 1 of 25 FCC ID:VLJ-F50T Reference No.:270658 Contents of This Report 1. Client Information ............................................................................................................................... 3 1.1 Applicant .................................................................................................................................... 3 1.2 Manufacturer .............................................................................................................................. 3 1.3 Scope ......................................................................................................................................... 3 2. Equipment under Test (EUT) .............................................................................................................. 4 2.1 Identification of EUT .................................................................................................................. 4 2.2 Detail spec: ................................................................................................................................ 4 2.3 Additional Information Related to Testing .................................................................................. 4 3. General Test Conditions ...................................................................................................................... 5 3.1 Location ..................................................................................................................................... 5 3.2 Operating Environment .............................................................................................................. 5 3.3 Operating During Test ................................................................................................................ 5 3.4 Test Equipment .......................................................................................................................... 5 4. Measurement Uncertainty ................................................................................................................. 6 5. Radiated Electromagnetic Disturbances ............................................................................................. 7 5.1 Test Procedure ........................................................................................................................... 7 5.2 Measurement Equipment ........................................................................................................... 7 5.3 Test Result ................................................................................................................................. 7 5.3.1 Diagram 5-1 ................................................................................................................................... 9 5.3.2 Diagram 5-2 ................................................................................................................................. 10 5.3.3 Diagram 5-3 ................................................................................................................................. 11 5.3.4 Diagram 5-4 ................................................................................................................................. 14 6. 6dB Bandwidth test .......................................................................................................................... 17 6.1 Test Procedure ......................................................................................................................... 17 6.2 Measurement Equipment ......................................................................................................... 17 6.3 Test Result ............................................................................................................................... 17 6.3.1 Diagram 6-1 ................................................................................................................................. 18 7. Band Edge Compliance Test ......................................................................................................... 19 7.1 Test Procedure ......................................................................................................................... 19 7.2 Measurement Equipment ......................................................................................................... 19 7.3 Test Result ............................................................................................................................... 19 7.3.1 Diagram 7-1 ................................................................................................................................. 19 8. Power Spectral Density Test .......................................................................................................... 22 8.1 Test Proc…

Text truncated - open the document above for the full version.

Worldwide Testing and Certification EUT Setup photo -details- Figure 1 Setup for Radiated Emission(below 1GHz) Figure 2 Setup for Radiated Emission (above 1GHz)