VLJ-MBP31PUDigital Baby Monitor (Parent Unit)

USERíS GUIDE MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad BABY MONITOR USERíS GUIDE The features described in this userís guide are subject to modifications without prior notice. This Userís Guide provides you with all the information you need to get the most from your product.Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.Got everything?ï Parent unitï Camera unit(s)ï Rechargeable Ni-MH battery pack ï Power adapter for the Parent unitï Power adapter(s) for the Camera unitIn multi-camera packs, you will find one or more additional camera units with power adapter units. Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom.Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.For product related questions, please call: US and Canada 1-888-331-3383 On the Web: www.motorola.com 1. Display 2. Menu key ( ) 3. Left / Vol - key 4. Microphone 5. Down / Video On-Off key 6. Right / Vol + key 7. Sound level LED indicator 8. Up/Talk key 9. Power/Channel*/Enter key 10. Power adapter connector 11. Belt clip 12. Speaker 13. Battery cover screw 14. Battery cover Overview of your Parent unit Parent unit menu icons Adjust brightness level of the LCDTurn the night vision on or offPair Parent unit to a CameraUn-register paired CameraEnter camera scan modeSelect lullabies 10 12 9 3 4 5 8 7 6 *This function is only available for multi-pack version with more than one camera. 14121113 Overview of y our Camera unit 1. Power LED 2. Infrared LEDs 3. Light sensor 4. Microphone 5. Camera lens 6. On/Off switch 7. Speaker 6 7 Important guidelines for installing your Baby Monitorï To use your video monitor camera and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. ï Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete, between the camera and parent unit may block the radio signal. ï The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV's, computers, cordless or mobile phones, fluorescent lights or dimmer switches. ï Use of other 2.4GHz products, such as wireless networks, Bluetooth Æ systems or microwave ovens may cause interference with this product, so keep the baby monitor away from these types of products, or turn them off if they appear to be causing interference. ï If the signal is poor, try moving the parent and/or the Camera unit to different positions in the rooms. 2 1 5 3 4 Table of contents 5 ENGLISH Table of contents1. Safety Instructions ..................................................................... 62. Getting started ............................................................................ 8 2.1 Camera unit power supply.......................................................... 8 2.2 Parent unit battery installation .................................................... 9 2.3 Parent unit power supply.......................................................... 10 2.4 Registration ..............................................................................11 2.5 De-registration.......................................................................... 12 3. Using the Camera Unit ............................................................. 13 3.1 Setting up ................................................................................. 13 3.2 Selecting a camera channel or Enable Multi-video display (for multi-pack only) .......................14 3.3 Pairing camera channels..........................................................14 3.4 Night vision............................................................................... 14 3.5 Talk function ............................................................................. 14 3.6 Adjusting the volume of the parent unit ....................................15 3.7 Video On/Off Function..............................................................15 3.8 Camera Scan Mode ................................................................. 15 3.9 Play lullaby ............................................................................... 15 4. MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad Parent Unit Menu Options ................................ 164.1 Brightness ................................................................................ 16 4.2 Night Vision ..............................................................................16 5. Disposal of the device (environment) ..................................... 176. Cleaning..................................................................................... 177. Help ............................................................................................ 188. General Information.................................................................. 199. Wall mounting instructions ..................................................... 29 6 Safety Instructions 1. Safety InstructionsWARNINGThis baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.ï Adult assembly is required. Keep small parts away from children when assembling. ï This product is not a toy. Do not allow children to play…

Text truncated - open the document above for the full version.

Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Hong Kong Tel: (852) 2802 7388 Fax: (852) 2802 8138 _______________________________________ . Date 07/06/2012 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD UNITED KINGDOM Dear Sir or Madam, We, Binatone Electronics International Limited, Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong, hereby authorize Maki Li (TUV SUD HK LTD) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 07/12/2012. Sincerely, Company Officer: Paul Tsui Telephone Number: 2802 7388 Email: [email protected]

Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Hong Kong Tel: (852) 2802 7388 Fax: (852) 2802 8138 _______________________________________ . Date 07/06/2012 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD UNITED KINGDOM Confidentiality Request FCC ID: VLJ-MBP31PU/ VLJ-MBP31BU Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Binatone Electronics International Limited hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Theory of Operation Binatone Electronics International Limited also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (07/12/2012): Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Paul Tsui Telephone Number: 2802 7388 Email: [email protected]

Appendix B Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.: MBP31PU Photo of EUT – External EUT Photos Page 1 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Appendix B Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.: MBP31PU Photo of EUT – External EUT Photos Page 2 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Appendix B Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.: MBP31PU Photo of EUT – External EUT Photos Page 3 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong AC/DC Adaptor – S04-003-0050-00600 AC/DC Adaptor – S004LU0500060

1) 2) material: adhesive label with plastic lamination on top 3) scale: 1:1, 4) Pandachip Code: 4) Pandachip Code: M FCC Unit Label Parent unit battery label si ze: 2 x 3 m m P 31B White background black letters 20 Produce date " G " f or R oH S Date code and service no. label on base unit back and handset -battery compartment Y our factory code is ‘P’ 09 = Year (200 9) ________ Serial no. start from ‘000001’ (6 digits) white background black letters scale: 1:1, size: 29x6mm Date code and serial no. label for base unit -back Date code and serial no. label for cordless handset-battery compartment 05 = Month ( May ) P 0 0 000001G 9 5 P 0 0 000001G 9 5 MBP30 series INPUT : DC5V 600mA Use only power supplies listed in the user instructions. INPUT : DC5V 1000mA Use only power supplies listed in the user instructions. Extra label for adaptor port 1) White background black letters 2) material: PET 3):Scale:1:1, size 18x5mm 4) Pandachip Code: 1) White background black letters 2) Materi al : l abel paper w i th pl asti c l am i nati on on top Baby unit rating label 3) scale: 1:1, size: 22x17mm Use only power supplies listed in the user instructions. FCC ID: VLJ-MBP31BU IC: 4522A-MBP31BU Model: MBP31BU INPUT : DC5V 600mA MADE IN CHINA Use only power supplies listed in the user instructions. FCC ID: VLJ-MBP31BU IC: 4522A-MBP31BU Model: MBP31BU INPUT : DC5V 500mA MADE IN CHINA 1) Pandachip Code: MADE IN CHINA Model No: MBP31PU FCC ID : VLJ-MBP31PU IC :4522A-MBP31PU Ni-MH Battery pack 3.6V, 850mAh INPUT : Adaptor DC 5V 600mA Rechargeable Batteries Only Use Only Batteries and Power Supplies listed in the user instructions. MADE IN CHINA Model No: MBP31PU FCC ID : VLJ-MBP31PU IC: 4522A-MBP31PU Ni-MH Battery pack 3.6V, 650mAh INPUT : Adaptor DC 5V 1000mA Rechargeable Batteries Only Use Only Batteries and Power Supplies listed in the user instructions.

Appendix C Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.:MBP31PU Photo of EUT – Internal EUT Photos Page 1 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Appendix C Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.:MBP31PU Photo of EUT – Internal EUT Photos Page 2 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Appendix C Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.:MBP31PU Photo of EUT – Internal EUT Photos Page 3 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

SZ12070090S01 Page 2 of 52 DIRECTORY DIRECTORY ...................................................................................................................................... 2 TESTING LABORATORY ................................................................................................................. 4 1.1.IdentificationoftheResponsibleTestingLaboratory ............................................................ 4 1.2.IdentificationoftheResponsibleTestingLocation ................................................................. 4 1.3.AccreditationCertificate ............................................................................................................ 4 1.4.ListofTestEquipments ............................................................................................................. 4 2. TECHNICAL INFORMATION ....................................................................................................... 5 2.1.IdentificationofApplicant ......................................................................................................... 5 2.2.IdentificationofManufacturer .................................................................................................. 5 2.3.EquipmentUnderTest(EUT) ................................................................................................... 5 2.3.1.PhotographsoftheEUT .......................................................................................................... 5 2.3.2.IdentificationofallusedEUT ................................................................................................. 5 2.4.AppliedReferenceDocuments .................................................................................................. 6 2.5.DeviceCategoryandSARLimits ............................................................................................... 6 2.6.TestEnvironment/Conditions .................................................................................................. 7 3. SPECIFIC ABSORPTION RATE (SAR) ........................................................................................ 8 3.1.Introduction ................................................................................................................................ 8 3.2.SARDefinition ............................................................................................................................ 8 4. SAR MEASUREMENT SETUP ...................................................................................................... 9 4.1.TheMeasurementSystem ......................................................................................................... 9 4.2.Probe ........................................................................................................................................... 9 4.3.ProbeCalibrationProcess ....................................................................................................... 11 4.3.1DosimetricAssessmentProcedure ...................................................................................... 11 4.3.2FreeSpaceAssessmentProcedure ....................................................................................... 11 4.3.2TemperatureAssessmentProcedure ................................................................................... 11 4.4.Phantom .................................................................................................................................... 12 4.5.DeviceHolder ........................................................................................................................... 12 5. TISSUE SIMULATING LIQUIDS ................................................................................................ 13 6. UNCERTAINTY ASSESSMENT .................................................................................................. 14 6.1.UNCERTAINTYEVALUATIONFORHANDSETSARTEST ..................................................... 14 6.2.UNCERTAINTYFORSYSTEMPERFORMANCECHECK ......................................................... 15 SZ12070090S01 Page 3 of 52 7. SAR MEASUREMENT EVALUATION ....................................................................................... 17 7.1.SystemSetup ............................................................................................................................ 17 7.2.ValidationResults .................................................................................................................... 18 8. OPERATIONAL CONDITIONS DURING TEST ........................................................................ 19 8.1.Body‐wornConfigurations ...................................................................................................... 19 8.2.Measurementprocedure ......................................................................................................... 19 8.3.Descriptionofinterpolation/extrapolationscheme ............................................................. 20 9.MeasurementOfConductedPeakOutputPower. .................................................................... 21 10. TEST RESULTS LIST ............................................................................................................... 22 ANNEX A EUT SETUP PHOTOS .................................................................................................... 23 ANNEX B GRAPH TEST RESULTS ................................................................................................ 26 Change History IssueDateReason for change 1.0Jul. 18 ,2012First edition SZ12070090S01 Page 4 of 52 Testing Laboratory 1.1. Identification of the Responsible Testing Laboratory Company Name:Shenzhen Morlab Communications Technology Co., Ltd. Department:Morlab Laboratory Address:3/F, Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, 518055 P. R. China Responsible Test Lab Manager:Mr. Shu Luan Telephone:+86 755 86130268 Facsimil…

Text truncated - open the document above for the full version.

TEST REPORT Date: 2012-07-03 Report No.: 60.870.12.019.02F Page 1 of 31 TUV SUD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Applicant: Binatone Electronics International Ltd Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Description of Samples:Model name: Digital Baby Monitor (Monitor) Brand name: Motorola Model no.:MBP31PU FCCID:VLJ-MBP31PU Date Samples Received:2012-06-01 Date Tested:2012-06-14 – 2012-07-03 Investigation Requested:FCC Part 15 Subpart C, Section 15.247 Conclusions:The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks:---- Checked by:Approved by:- Ray CheungJeff Pong Project EngineerOperation Manager Wireless & Telecom DepartmentWireless & Telecom Department ReportNo.: 60.870.12.019.01F Page 2 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong CONTENT: Cover Page 1 of 31 Content Page 2-3 of 31 1.0General Details 1.1Test Laboratory Page 4 of 31 1.2Applicant Details Page 4 of 31 1.3Equipment Under Test [EUT] Page 5 of 31 1.4 Related Submittal(s) Grants Page 5 of 31 2.0Technical Details 2.1Investigations Requested Page 6 of 31 2.2Test Standards and Results Summary Page 6 of 31 3.0Test Methodology 3.1Radiated Emission Page 7 of 31 3.2Field Strength Calculation Page 7 of 31 3.3Conducted Emission Page 7 of 31 4.0Test Results 4.1 Number of Frequency Hopping Page 8 of 31 4.2 20dB Bandwidth Measurement Page 9-10 of 31 4.3 Hopping Channel Carrier Frequency Separation Page 11 of 31 4.4 Average Time of Occupancy Page 12-13 of 31 4.5 Pseudorandom Hopping Algorithm Page 14 of 31 4.6 Band Edge Measurement Page 15-16 of 31 4.7 Maximum Output Power Page 17-19 of 31 4.8 Out ofBand Emissionsand Emissions in Restricted Bands Page 20-25 of 31 4.9 Conducted Emission on AC Mains Page 26-30 of 31 ReportNo.: 60.870.12.019.01F Page 3 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 5.0List of Measurement Equipments Page 31 of 31 Appendix A Photos of Test Setup Appendix B External EUT Photos Appendix C Internal EUT Photos ReportNo.: 60.870.12.019.01F Page 4 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 1.0General Details 1.1Test Laboratory SEM. Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin’an Fanshen Road, Bao’an District, Shenzhen Registration Number: 994117 Tested by: John Zhi 1.2Applicant Details Applicant Binatone Electronics International Ltd Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Manufacturer Pandachip Limited Room 1-3, 10 th Floor, C-Bons International Centre, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong SAR ReportNo.: 60.870.12.019.01F Page 5 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 1.3Equipment Under Test [EUT] Description of EUT Product Description:Digital Baby Monitor (Monitor) ModelNo.:MBP31PU Brand Name: Motorola FCCID:VLJ-MBP31PU Rating:-DC5.0V,600mA powered by AC/DC power adaptor Operated Frequency:2404-2468MHz No. of Operated Channel:33 Accessories and Auxiliary Equipments:- AC/DC power adaptor 1. S04-003-050-00600 (Keen Ocean) 2. S004LU0500060 (Ten Pao) Antenna Type:Integral Manufacture of Antenna:Pandachip Antenna Gain:0dBi Antenna Model:N/A General Operation of EUT The Equipment Under Test (EUT) is a monitor of the Digital Baby Monitor operated at 2.4GHz. FHSS Operation Principle: This module is controlled by microchip to generate Pseudorandom Frequency Hopping Sequence, this module support 33 hopping channels. Refer to section 4.5 of this report to have more detail of Pseudorandom Hopping Algorithm. 1.4Related Submittal(s) Grants This is a signal application subjected to Certificate Authorization. ReportNo.: 60.870.12.019.01F Page 6 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 2.0Technical Details 2.1Investigations Requested Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 and ANSI C63.4: 2003 2.2Test Standards and Results Summary Tables Test ConditionTest RequirementTest Result PassN/A Number of Frequency Hopping Section 15.247 ( a1 ) 20dB Bandwidth Measurement Section 15.247 ( a1 ) Hopping Channel Carrier Frequency Separation Section 15.247 ( a1 ) Average Time of Occupancy Section 15.247 ( a1 ) Pseudorandom Hopping Algorithm Section 15.247 ( a1 ) Band Edge Measurement Section 15.247 Maximum Output PowerSection 15.247 ( b1 ) Out of Band EmissionSection 15.247 ( d ) Radiated Emission in Restricted Band Section 15.247 ( d ) Conducted Emission on AC Mains Section 15.207 RF ExposureSection 15.247 ( i ) Antenna RequirementSection 15.203 See note 1 Note 1 :The EUT uses a permanently attached antenna, which in accordance to Section 15.203, is considered sufficient to comply with the provisions of this section. Remark: N/A - Not Applicable ReportNo.: 60.870.12.019.01F Page 7 of 31 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 3.0Test Methodology 3.1Radiated Emission The sample was placed 0.8m above the ground plane on a standard emission test site *. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 3.2Field Strength Calculation The field strength at 3 m was establishe…

Text truncated - open the document above for the full version.

Appendix A Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.:MBP31PU Photo of Test Setup: Page 1 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Radiated Emissions Appendix A Date: 2012-07-03 Report No.: 60.870.12.019.02F Model No.:MBP31PU Photo of Test Setup: Page 2 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Conducted Emissions