VLJ-MBP621PUVideo Baby Monitor (Parent Unit)

User’s Guide Digital Video Baby Monitor Models: MBP621, MBP621-2, MBP621-3, MBP621-4 The features described in this User’s Guide are subject to modifications without prior notice. Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the Digital Video Baby Monitor. Now you can view and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product-related questions, please call: This User's Guide provides you with all the information you need to get the most from your product. Before you use the digital video baby monitor, we recommend that you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the electrical outlet to carry it to another location. Please read the Safety Instructions on page 7 before you install the units. Got everything? • 1 x Parent unit • 1 x Baby unit (camera) • 1 x Rechargeable Ni-MH battery pack for the Parent unit • 1 x Battery door for Parent unit • 1 x Belt clip/stand for Parent unit • 1 x Power adapter for Parent unit • 1 x Power adapter for Baby unit In packs with multi baby units, you will find one or more additional baby units with power adapters. US and Canada 1-888-331-3383 Email: [email protected] Overview of the Parent Unit 1.LCD display 2.Battery level indicator On when the parent unit battery is being charged. Flashes when the parent unit battery is low and needs charging. Off when the parent unit battery is fully charged, or when the battery is not installed. 3.Power/Link indicator On when the parent unit is powered on. Off when the parent unit battery is fully charged. Flashes when pairing, or when searching for a baby unit. 4.Microphone 5.Control key panel UP / VOLUME + Press to increase speaker volume. While in a menu, press to scroll up. While viewing a zoomed image, press and hold to move the image upward. DOWN / VOLUME - Press to decrease speaker volume. While in a menu, press to scroll down. While viewing a zoomed image, press and hold to move the image downward. LEFT/- < While in a menu, press to choose the option on the left. While viewing a zoomed image, press to zoom out; or press and hold to move the image leftward. RIGHT/+ > While in a menu, press to choose the option on the right. While viewing a zoomed image, press to zoom in; or press and hold to move the image rightward. Power ON/OFF button Press and hold to power on or off. Press to turn the screen on or off. MENU/SELECT Press to enter the menu. While in a menu, press to choose an option, or save a setting. TALK T Press and hold to talk to the baby unit. 6.Speaker 7.Belt clip/stand 8.Battery compartment cover 9.Power jack 1 2 3 4 5 6 7 8 9 Parent Unit display icons Connection status - displays when strong signal strength is detected between the baby unit and the parent unit. -, or displays when moderate signal strength is detected between the baby unit and the parent unit. - displays when the link between the baby unit and the parent unit is lost. - displays when the parent unit is searching for a baby unit. Current view status - Displays the number of the baby unit that is being viewed. Zoom - Displays when the camera on the baby unit is zoomed in. Vol um e o ff - Displays when the volume is turned off. Sound activation - You can turn Sound activation function ON or OFF. To check on your baby whenever there is sound in the baby’s room, please turn it ON. - Displays when sound activation is ON. When the baby unit detects a sound in the baby's room, the video image of the baby will be displayed on the parent unit. 61 o F Current temperature - Displays the current room temperature of the selected baby unit. Battery status - scrolls when the battery is charging. - displays when the battery is fully charged. - displays when the battery is low and needs charging. - displays when you do not have a battery installed but operates using AC power, or the battery has been installed incorrectly. Camera selection - You can select the baby unit you want to view, or view all baby units in Scan Mode. Brightness - You can change the brightness of the screen. Sensitivity - You can change the sound sensitivity level of the baby unit. The higher the sound sensitivity level, the more sensitive the baby unit is in detecting sounds and transmitting them to the parent unit. Pairing - The system comes with baby unit(s) already paired with the parent unit. You can add or replace baby units. Overview of the Baby Unit 1 2 3 4 5 6 7 8 9 10 Important guidelines for installing your digital video baby monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the baby unit and parent unit may block the radio signal. • The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. • If the signal is poor, try moving the parent unit and/or the baby unit to different positions in the rooms. 1.Camera lens 2.Infrared lights 4 x infra-red LEDs for night vision illumination. 3.Power/Link indicator On steadily when the baby unit is powered on and linked to the parent unit. Flashes when the baby unit is not linked to a parent unit; or the pairing process is in progress; or the parent unit is not viewing this baby unit. 4.Microphone 5.Control key panel PAIR Press and hold to pair with the parent unit. Power ON/OFF button Press and hold to power the baby …

Text truncated - open the document above for the full version.

Date 09-10-14 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Binatone Electronics International Limited, hereby authorize Ray Cheung (TUV SUD HK LTD) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 09-04-2015. Sincerely, Company Officer: Karl Heinz Muller Telephone Number: 852 2802 7388 Email: [email protected]

Date (09/10/2014) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: VLJ-MBP621PU, VLJ-MBP621BU Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Binatone Electronics International Limited, hereby requests permanent confidential treatment of information accompanying this application as outlined below: [Common exhibits for which confidentiality is requested are: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] Binatone Electronics International Limited, also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of up to 180 days: << List of Exhibits either by name or type e.g. “Internal Photos” [exhibit type]>> [Common exhibits for which short-term confidentiality is requested are: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Karl Heinz Muller Telephone Number: 852 2802 7388 Email: [email protected]

Appendix B Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 1 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong. Appendix B Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 2 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong. Appendix B Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 3 of 3 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong.

MBP621 PU   Engraved in glossy Raised 0.3mm Engraving Raised 0.2mm Engraving Raised 0.2mm Engraving Raised 0.1mm Engraved in glossy Raised 0.3mm MBP621 BU label area   MBP621 PU-(US/CA) MBP621 BU-(US/CA) SIZE: 40X20MM 50# PET MATTE 92-027662-020-100 SIZE: 24X20MM 50# PET MATTE 92-027661-020-100 SIZE: 28X10MM 50# PET MATTE S/N: VT1403000001G S/N: VT1409000001G S/N: VT1409000001G Model : MBP621BU Made in China IC : 4522A-MBP621BU FCC I D : VLJ-MBP621BU Input : DC 6V 600mA Use only power supplies listed in the user’s guide Model : MBP621BU Made in China IC : 4522A-MBP621BU FCC I D : VLJ-MBP621BU Input : DC 6V 600mA Use only power supplies listed in the user’s guide IC : 4522A-MBP621PU FCC I D : VLJ-MBP621PU Use only batteries and power supplies listed in the user’s guide Model : MBP621PU Made in China Input : DC6V 600mA BC IC : 4522 A-MBP621PU FCC I D : V LJ-MBP621PU Use only batteries and power supplies listed in the user’s guide Model : MBP621PU Made in China Inpu t : DC6 V 600mA BC

Appendix C Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 1 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong. Appendix C Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 2 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong.

Page 1 of 75 SAR Test Report Report No.: AGC00851141001FH01 FCC ID : VLJ-MBP621PU APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Video Baby Monitor (Parent Unit) BRAND NAME : motorola MODEL NAME : MBP621PU CLIENT : Binatone Electronics International Ltd. DATE OF ISSUE : Oct. 24,2014 STANDARD(S) : IEEE Std. 1528:2003 47CFR § 2.1093 IEEE/ANSI C95.1 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.:AGC00851141001FH01 Page 2 of 75 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes V1.0/Oct. 24,2014ValidOriginal Report The test plans were performed in accordance with IEEE Std. 1528:2003; 47CFR § 2.1093; IEEE/ANSI C95.1 and the following specific FCC Test Procedures: ·KDB 447498 D01 General RF Exposure Guidance v05r01 ·KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01 ·KDB 248227 D01 SAR meas for 802 11 a b g v01r02 Report No.:AGC00851141001FH01 Page 3 of 75 Test Report Certification Applicant NameBinatone Electronics International Ltd. Applicant AddressFloor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong. Manufacturer NameVTech (Dongguan) Telecommunication Ltd. Manufacturer Address VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. Product DesignationVideo Baby Monitor (Parent Unit) Brand Name motorola Model NameMBP621PU Different DescriptionN/A EUT VoltageDC2.4V/750mAh by battery Applicable Standard IEEE Std. 1528:2003 47CFR § 2.1093 IEEE/ANSI C95.1 Test DateOct. 24,2014 Performed Location Attestation of Global Compliance(Shenzhen) Co., Ltd. 2 F, Building 2, No.1-No.4, Chaxi SanweiTechnical IndustrialPark, Gushu,Xixiang Street, Bao'an District, Shenzhen, China Report TemplateAGCRT-US-2.4G/SAR (2014-04-01) Tested By Eric ZhouOct. 24,2014 Checked By Angela LiOct. 24,2014 Authorized By Solger ZhangOct. 24,2014 Report No.:AGC00851141001FH01 Page 4 of 75 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ........................................................................................................................ 5 2. GENERAL INFORMATION.............................................................................................................................................. 6 2.1.EUTDESCRIPTION........................................................................................................................................................ 6 2.2.TESTPROCEDURE ........................................................................................................................................................ 7 2.3.TESTENVIRONMENT ..................................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ...................................................................................................................................... 8 3.1.SPECIFICABS ORPT IONRATE(SAR) ............................................................................................................................. 8 3.2.SARMEASUREMENTPROCEDURE ................................................................................................................................ 9 3.3.COMOSARSYSTEMDESCRIPTION ............................................................................................................................ 10 3.4.COMOSARE-FIELDPROBE ...................................................................................................................................... 12 3.5.ISOTROPICE-FIELDPROBESPECIFICATION ................................................................................................................. 12 3.6.ROBOT ....................................................................................................................................................................... 12 3.7.VIDEOPOSITIONINGSYSTEM ....................................................................................................................................... 13 3.8.DEVICEHOLDER ......................................................................................................................................................... 13 3.9.ELLIPTICPHANTOM ..................................................................................................................................................... 14 4. TISSUE SIMULATING LIQUID ...................................................................................................................................... 15 4.1.THE COMPOSITION OF THE TISSUESTIMULANT LIQUID .................................................................................................. 15 4.2.TISSUECALIBRATIONRESULT ..................................................................................................................................... 16 4.3.TISSUEDIELECTRICPARAMETERS FORHEAD ANDBODYPHANTOMS ........................................................................... 17 5. SAR MEASUREMENT PROCEDURE .......................................................................................................................... 18 5.1.SARSYSTEMVALIDATIONPROCEDURES .................................................................................................................... 18 5.2.SARSYSTEMVALIDATION .......................................................................................................................................... 19 6. EUT TEST POSITION ..................................................................................................................................................... 21 6.1.BODYWORNPOSITION ............................................................................................................................................... 21 7. SAR E…

Text truncated - open the document above for the full version.

TEST REPORT Date: 2014-09-15 Report No.: 60.870.14.018.02F Page 1 of 29 TUV SUD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong Applicant:Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Description of Samples:Model name: VideoBaby Monitor(ParentUnit) Brand name: motorola Model no.:MBP621PU FCCID:VLJ-MBP621PU Date Samples Received:2014-08-27 Date Tested:2014-08-27 to 2014-09-14 Investigation Requested:FCC Part 15 Subpart C, Section 15.247 Conclusions:The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks:--- Checked by:Approved by:- Ray CheungJeff Pong Project EngineerOperation Manager Wireless & Telecom DepartmentWireless & Telecom Department ReportNo.: 60.870.14.018.02F Page 2 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong CONTENT: Cover Page 1 of 29 Content Page 2-3 of 29 1.0General Details 1.1Test Laboratory Page 4 of 29 1.2Applicant Details Page 4 of 29 1.3Equipment Under Test [EUT] Page 5 of 29 1.4 Related Submittal(s) Grants Page 5 of 29 2.0Technical Details 2.1Investigations Requested Page 6 of 29 2.2Test Standards and Results Summary Page 6 of 29 3.0Test Methodology 3.1Radiated Emission Page 7 of 29 3.2Field Strength Calculation Page 7 of 29 3.3Conducted Emission Page 7 of 29 4.0Test Results 4.1 Number of Frequency Hopping Page 8 of 29 4.2 20dB Bandwidth Measurement Page 9-10 of 29 4.3 Hopping Channel Carrier Frequency Separation Page 11 of 29 4.4 Average Time of Occupancy Page 12-14 of 29 4.5 Pseudorandom Hopping Algorithm Page 15 of 29 4.6 Band Edge Measurement Page 16-17 of 29 4.7 Maximum Output Power Page 18-20 of 29 4.8 Out ofBand Emissionsand Emissions in Restricted Bands Page 21-25 of 29 4.9 Conducted Emission on AC Mains Page 26-28 of 29 ReportNo.: 60.870.14.018.02F Page 3 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 5.0List of Measurement Equipments Page 29 of 29 Appendix A Photos of Test Setup Appendix B External EUT Photos Appendix C Internal EUT Photos ReportNo.: 60.870.14.018.02F Page 4 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 1.0General Details 1.1Test Laboratory Attestation of Global ComplianceSZCoLtd. 2/F, Building 2,No.1-No.4,Chaxi Sanwei, Technical Industrial Park, Gushu, Xixiang, Shenzhen, China. Registration Number: 259865 Tested by: John Zhi 1.2Applicant Details Applicant Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan Hong Kong. Manufacturer VTech(Dongguan) Telecommunications Limited VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guandong, China ReportNo.: 60.870.14.018.02F Page 5 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 1.3Equipment Under Test [EUT] Description of EUT Product Description:VideoBaby Monitor(ParentUnit) ModelNo.:MBP621PU Brand Name: Motorola FCCID:VLJ-MBP621PU Rating:DC6.0V,600mApowered by AC/DC power adaptor Or DC 2.4V 750mAh (Ni-MH package rechargeable battery) Operated Frequency:2407.5 – 2475 MHz No. of Operated Channel:21 Accessories and Auxiliary Equipments:Switching Adaptor Antenna Type:Integral Manufacture of Antenna:VTech(Dongguan) Telecommunications Limited Antenna Gain:0 dBi Antenna Model:N/A General Operation of EUT The Equipment Under Test (EUT) is a Monitor of Wireless Monitoring System. FHSS Operation Principle: This module is controlled by microchip to generate Pseudorandom Frequency Hopping Sequence, this module support 21 hopping channels. Refer to section 4.5 of this report to have more detail of Pseudorandom Hopping Algorithm. 1.4Related Submittal(s) Grants This is a signal application subjected to Certificate Authorization. ReportNo.: 60.870.14.018.02F Page 6 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 2.0Technical Details 2.1Investigations Requested Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15:2012 and ANSI C63.4: 2009 2.2Test Standards and Results Summary Tables Test ConditionTest RequirementTest Result PassN/A Number of Frequency Hopping Section 15.247 ( a1 ) 20dB Bandwidth Measurement Section 15.247 ( a1 ) Hopping Channel Carrier Frequency Separation Section 15.247 ( a1 ) Average Time of Occupancy Section 15.247 ( a1 ) Pseudorandom Hopping Algorithm Section 15.247 ( a1 ) Band Edge Measurement Section 15.247 Maximum Output PowerSection 15.247 ( b1 ) Out of Band EmissionSection 15.247 ( d ) Radiated Emission in Restricted Band Section 15.247 ( d ) Conducted Emission on AC Mains Section 15.207 Antenna RequirementSection 15.203 See note 1 Note 1 :The EUT uses a permanently attached antenna, which in accordance to Section 15.203, is considered sufficient to comply with the provisions of this section. Remark: N/A - Not Applicable ReportNo.: 60.870.14.018.02F Page 7 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong 3.0Test Methodology 3.1Radiated Emission The sample was placed 0.8m above the ground plane on a standard emission test site *. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 3.2Field Strength Calculation The field strength at 3 m …

Text truncated - open the document above for the full version.

Appendix A Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 1 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong. Radiated Emission Appendix A Date: 2014-09-15 Report No.: 60.870.14.018.02F Model No.: MBP621PU Page 2 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong. Conducted Emission