VLJ-MH003TBoom2/Boom2+

订单编号 工厂型号 版 本 mm(1:1)2019-04-17 单 位 客 户 客户品牌 客户型号 日 期工程设计 业务审核 US版通用品说明书 65*80MM;80G书纸;单色双面印刷 15P 骑马钉装钉 77-007-01530 Binatone Boom2/Boom2+/Boom2+车充版 H715M/H715M+/H715M+车充版 Motorola ® 1.0 工程审核批 准 物料名称 规格/材质 描述 物料编码 EN MOTOROLA BOOM2 MOTOROLA BOOM2+ 1 EN AT A GLANCE the important bits, quick and easy Volume Up Button Charge (Micro USB) Call Button Press to answer/ end call. Boom open - on Microphone Volume Down Button Charging Status Light: Blue – Fully charged Red – charging EN 2 Wear Ear Hook Earpiece 3 EN CHARGE IT let’s get you up and running To charge your headset, plug the USB cable into the headset's micro USB port and connect to USB power source. Note: Fully charge the headset before you use it. Tip: you’re not using it. Caution: Your battery is designed to last the life of your device. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage the device, void your warranty, and could cause injury. CONNECT & GO let’s get you connected EN 4 EASYPAIR TM METHOD Turn on Bluetooth on your device. Turn on your headset and follow the voice prompts. Go to the Bluetooth menu on your device to pair & connect with the headset. When the device and headset connect, you’ll hear “pairing complete”. 5 EN COMFORT what feels best on you EAR HOOK On-Ear Right EarLeft Ear right or left use Wear EAR TIP (NO HOOK) Wear Attach ear tip EN 6 7 EN BASICS standard features, advanced quality CALLS To... answer a call reject a call call redial last call mute or unmute a call Press the Call button. Press and hold the Volume Up or Volume Down button until you hear a tone. Press the Call button to activate voice recognition. (phone dependent) Press and hold th e Call button 2 seconds until you hear a tone. Press and hold the Volume Up and Volume Down buttons together until you hear “mute on” or “ ”. To... end a call change call volume answer a second incoming call reject a second call Press the Call button Press the Volume Up or Volume volume, press and hold the Volume Up or Volume Down button. Press the Call button. Press and hold the Volume Up or Volume Down button until you hear a tone. EN 8 Notes: • •Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely. 9 EN STATUS LIGHT If light shows... three blue flashes three red flashes rapid blue/red flashes rapid blue/purple flashes short blue flash your headset is... power on power o pairing mode connection successfully incoming/outgoing call on phone 1 If light shows... slow blue pulse slow blue flash slow red flash short blue/red flash short red flash your headset is... on a call on standby on a call (call muted) attempting to connect low battery Note: 1 Headset will automatically turns o if no connection with phone after 5 minutes. 2 After paired to the mobile phone, headset will enter sleep mode when boom is closed (headset switches o) and bluetooth of phone stays on. If a call is come, you can pick it up by simply opening the boom (switch on the headset). It will aut omatically connect and pick call. 3 Closing the Boom saves battery life. EN 10 11 EN ADVANCED SECOND DEVICE Do you use two phones? Or maybe a phone and a tablet? Connect with both of them. 1 “CONNECT & GO” on page 4). 2 ® 3 Now pair the second device with your headset as normal. 4 Once paired, to connect with both devices simply turn them on. You’ll hear “phone connected” as each device connects with your headset. Note: end call, just use the feature as normal and follow the voice prompts. EN 12 CALLER ID “call from <number>” on an incoming call. Note: BATTERY READOUT When you’re not in a call, press the Volume Up and Volume Down buttons together in standby mode to Tip: you’re not using it. EN Hubble Connect TM f or Motorola Hubble Connect for Motorola can greatly enhance your earbud experience. Download app for free at the App Store ® or Google Play TM (Android TM 4.3 or higher). • Locate a lost earbud: Locate on a map the last time your earbud was connected to your device. Safety instructions for use moderate level. Avoid listening to music at loud volume levels for prolonged periods of time as this may cause permanent hearing damage or hearing loss. Your hearing is delicate and highly sensitive so please listen to your music responsibly. For more information visit the Deafness Research Foundation www.drf.org Don't use Boom when it is unsafe to do so. For example, while operating a vehicle, cycling, crossing a road, or any activity which requires your attention and ability to hear. You should be aware of your surroundings and use Boom responsibly. 13 Help & more Manufactured, distributed, or sold by Binatone Electronics property of their respective owners. © 2016 Motorola Mobility LLC. All rights reserved. •Get help: Visit www.motorolahome.com/support • Find accessories at: www.motorolahome.com Note: If you’re watching video while using your earbuds, your audio may be slightly out of sync with your video. This device contains licence-exempt transmitter(s)/receiv- er(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'e…

Text truncated - open the document above for the full version.

Keny Xu

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Binatone Electronics International Ltd. Address Floor 23A, 9 Des Voeux Road West, Sheung Wan Hong Kong China Grantee Code VLJ FCC ID VLJ-MH003T Authorized Contact Name Karl Heinz Mueller Contact Email [email protected] Contact Phone 852-28027388 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-5-25 Print Name: Karl Heinz Mueller Title: Chief Technical Officer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM1904013481CR FCC ID: VLJ-MH003T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

订 单 编 号 工厂型号 版 本 mm(1:1)2019-02-19 单 位 客户 客 户 品 牌 客 户 型 号 日 期工 程 设 计 业务审核 通用品胶件丝印/镭雕 工艺如图示 77-007-***** Binatone Boom2/Boom2+/Boom2+车充版 H715M/H715M+/H715M+车充版 Motorola ® 1.1（增加型号区分） 1.2（ACC改为A CC） 工程审核批 准 物 料 名 称 规 格 / 材 质 描 述 物 料 编 码 IC: 4522A-MH003T FCC ID: VLJ-MH003T Model: MH003T MADE IN CHINA Manufactured by Binatone Telecom Plc,1 Apsley Way London NW2 7HF 718019C000001 3.5MM 20.6MM 11.3MM 8MM

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZEM1904013481CR FCC ID: VLJ-MH003T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM1904013481CR Applicant: Binatone Electronics International Ltd. Address of Applicant: Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Manufacturer: Binatone Telecom PLC Address of Manufacturer: 1 Apsley Way, London, NW2 7HF, United Kingdom Equipment Under Test (EUT): EUT Name: Boom2/Boom2+ Model No.: MH003T Trade mark: Motorola FCC ID: VLJ-MH003T Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2019-05-05 Date of Test: 2019-05-06 to 2019-05-20 Date of Issue: 2019-06-24 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2019-06-24 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 3 of 7 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6 5 SAR EVALUATION ...................................................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7 5.1.1 Standard Requirement ..................................................................................................................... 7 5.1.2 Limits ................................................................................................................................................ 7 5.1.3 EUT RF Exposure ............................................................................................................................ 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power supply: Rechargeable battery DC 3.7V 120mAh(Charge by USB) Cable: USB cable:100cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.2 Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, π/4DQPSK, 8DPSK Sample Type: Portable production Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: PIFA Antenna Gain: 0dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348102 Page: 7 of 7 5 SAR Evaluation 5.1 RF Expos…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348101 Page: 1 of 94 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM1904013481CR Applicant: Binatone Electronics International Ltd. Address of Applicant: Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Manufacturer: Binatone Telecom PLC Address of Manufacturer: 1 Apsley Way, London, NW2 7HF, United Kingdom Equipment Under Test (EUT): EUT Name: Boom2/Boom2+ Model No.: MH003T Trade mark: Motorola FCC ID: VLJ-MH003T Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2019-05-05 Date of Test: 2019-05-06 to 2019-05-20 Date of Issue: 2019-06-24 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348101 Page: 2 of 94 Revision Record Version Chapter Date Modifier Remark 01 2019-06-24 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348101 Page: 3 of 94 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190401348101 Page: 4 of 94 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 7 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 7 4.4 TEST LOCATION ............................................................................................................................. 8 4.5 TEST FACILITY ............................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................12 6.1 ANTENNA REQUIREMENT ................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 6.1.2 Conclusion ..............................................................................................................................12 6.2 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........13 6.2.1 Test Requirement: ..................................................................................................................13 6.2.2 Conclusion ..............................................................................................................................13 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................15 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................15 7.1.1 E.U.T. Operation ............…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM1904013481CR FCC ID: VLJ-MH003T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.2 Radiated Spurious Emissions Test Setup