VLJC101-LX-BSDigital Cordless Telephone (Base Unit)

2. Slide the battery cover back into place. 3. If you are charging the battery for the first time, place the handset on the base to charge for at least 24 hours continuously. 4. When the handset is fully charged, f icon will appear steady on the display. Plug the other end of the telephone line cord (make sure that one end is already plugged into the base) into the telephone wall outlet. Connecting the handset and charger (for multi-pack only) If you have purchased a multiple pack, you will need to carry out this process for all the handsets and chargers. 1. Plug the power adapter into the socket marked on the underside of the charger and plug the other end into the electrical outlet wall outlet. 2. Remove the battery cover from the back of the handset and insert the AAA 2.4v 300mAh Ni-MH rechargeable battery supplied. Please note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction. 3. Slide the battery cover back into place. 4. If you are charging the battery for the first time, place the handset on the charger to charge for at least 24 hours continuously. 5. When the handset is fully charged, f icon will appear steady on the display. The display will show HANDSET, the handset number, date and the time to indicate that it is registered to the base. IMPORTANT Warning! Use only the approved rechargeable Ni-MH battery pack (AAA 2.4v 300mAh Ni-MH rechargeable battery) supplied with your C101xLX. BATTERY LOW WARNING If E icon flashes on the display and you hear a warning beep every 2 minutes during a call, you will need to recharge the handset before you can resume use. When charging, f icon will scroll on the display. BATTERY PERFORMANCE In ideal conditions, a fully charged battery should give up to 10 hours of talk time or up to 200 hours standby time on a single charge. 1 Note that a new battery does not reach it’s full capacity until it has been put to normal use for several days. To keep your battery in the best condition, leave the handset off the base for a few hours at a time. Running the battery down at least one time per week will help prolong battery life. 4. Enter the date using the keypad (e.g. 08--12--14 for 12th of August 2014) and press m to confirm. 5. Enter the time using the 12 hour format hh:mm, e.g. 02:45 for 2:45. 6. Scroll u or d to select am or pm and press m to confirm. 5.4 Language 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Scroll d to Language and press m. 4. Scroll u or d to select the required language and press m to confirm. 6. Services 6.1 Call List type You can set the Call list to show All calls or Missed calls only. If All calls is selected, press d key in idle and you can view all calls lists. If Missed calls is selected, press d key in idle and you can view missed call only. 1. Press m, scroll d to Services and press m. 2. The display shows Call list type, press m . 3. Scroll u or d to select All calls or Missed calls and press m to confirm. 6.2 Area code You can set your local area code into the phone. When a number from that area code calls only the local number will be displayed and stored. The area code can be up to 5 digits long. 1. Press m, scroll d to Services and press m. 2. Scroll d to Area code is displayed. Press m. 3. Using the keypad enter the area code and press m to confirm. 6.3 Flash time Depending on your country and network operator, your C101xLX has the flash time set as 600 ms (Long). It is unlikely that you need to change this setting unless advised to do so. 1. Press m, scroll d to Services and press m. 2. Scroll d to Flash time and press m. 3. Press u or d to select Short, Medium or Long and press m to confirm. 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Press m. Scroll d to Key tone. 4. Press m, u or d to select On or Off and press m to confirm. 5.1.4 Docking tone on /off When you replace the handset in the base you will hear a double beep. You can switch this beep on or off. 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Press m. Scroll d to Docking tone. 4. Press m, u or d to select On or Off and press m to confirm. 5.1.5 Battery tones When the battery is running low you will hear a warning beep. You can switch this beep on or off. 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Press m. Scroll d to Battery tone. 4. Press m, u or d to select On or Off and press m to confirm. 5.2 Handset name If you are using more than one handset with your C101xLX base, you can set a personalized name for each handset to easily distinguish between them. A name can be up to 14 characters long. 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Scroll d to Phone name and press m. 4. Enter the new handset name and press m to confirm. Delete the current name by pressing b. 5.3 Date & time 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Scroll d to Date & time and press m. 4. Scroll u or d to the entry you want to delete, or search alphabetically and press m. The display shows Confirm?. 5. Press m to confirm or b to cancel. 4.5 Delete all entries 1. Press m. The display shows Phonebook. 2. Press m. The display shows View. 3. Scroll d to Delete all and press m. 4. The display shows Confirm?. 5. Press m to confirm or b to cancel. 5. Phone setup 5.1 Sounds 5.1.1 Ringer volume You can adjust the ringer volume and set different volume levels. Choose from 5 volume levels or Off. 1. Press m, scroll d to Phone setup. 2. Press m. The display shows Sounds. 3. Press m. The display shows Ring volume. 4. Press m, scroll u or d to select the volume (1 -5 or OFF) . 5. Press m to confirm or b to return to the previous menu. 5.1.2 Ringer tones You can set different ringer melodies for your internal and external calls. Choose from 10 different ringer melodies. NOTE You will hear a sample ring as you scroll to each ring melody. 1. Press m, scroll d…

Text truncated - open the document above for the full version.

ETC Report No. : 14-02-RBF-032-01 Sheet 1 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 1. Top View of EUT 2. Bottom View of EUT ETC Report No. : 14-02-RBF-032-01 Sheet 2 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 3. Front View of EUT 4. Side View of EUT ETC Report No. : 14-02-RBF-032-01 Sheet 3 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 5. Rear View of EUT 6. Side View of EUT

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: C1011LX| Colour: Black | Country: US File: PL_C1011LX_ US_Black_v2 Contact: [email protected] Date: 2014-03-28 Version: 2 Label font: Moto Sans LABELS IN POSITION Handset Label Handset label size: W 43mm x H 16mm BASE LABEL LABELS IN POSITION Engraving size: W50mm x H 35mm Base label size: W 49.5mm x H 34.5mm SGYYMMXXXXXXG Use only supplied Battery Model: C1011LX FCC ID: VLJC100-LX-HS US: BINW400BC101-LX IC: 4522A-C101LX CORDLESS TELEPHONE E235447 HAC SGYYMMXXXXXXG Use only supplied Battery Model: C1011LX FCC ID: VLJC100-LX-HSUS: BINW400BC101-LXIC: 4522A-C101LX CORDLESS TELEPHONE E235447 HA C Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1011LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION. Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1011LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION.

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: C1012LX| Colour: Black | Country: US File: PL_C1012LX_ US_Black_v3 Contact: [email protected] Date: 2014-03-28 Version: 3 Label font: Moto Sans LABELS IN POSITION Handset Label Handset label size: W 43mm x H 16mm BASE LABEL LABELS IN POSITION Engraving size: W50mm x H 35mm Base label size: W 49.5mm x H 34.5mm CHARGER LABEL Engraving size: W25mm x H 25mm Base label size: W 24.5mm x H 24.5mm SGYYMMXXXXXXG Use only supplied Battery Model: C1012LX FCC ID: VLJC100-LX-HS US: BINW400BC101-LX IC: 4522A-C101LX CORDLESS TELEPHONE E235447 HAC SGYYMMXXXXXXG Use only supplied Battery Model: C1012LX FCC ID: VLJC100-LX-HSUS: BINW400BC101-LXIC: 4522A-C101LX CORDLESS TELEPHONE E235447 HA C Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1012LX CORDLESS TELEPHONE E235447 Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1012LX CORDLESS TELEPHONE E235447 Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1012LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION. Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1012LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION.

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: C1013LX| Colour: Black | Country: US File: PL_C1013LX_ US_Black_v1 Contact: [email protected] Date: 2014-03-28 Version: 1 Label font: Moto Sans LABELS IN POSITION Handset Label Handset label size: W 43mm x H 16mm LABELS IN POSITION Engraving size: W50mm x H 35mm Base label size: W 49.5mm x H 34.5mm CHARGER LABEL Engraving size: W25mm x H 25mm Base label size: W 24.5mm x H 24.5mm SGYYMMXXXXXXG Use only supplied Battery Model: C1013LX FCC ID: VLJC100-LX-HS US: BINW400BC101-LX IC: 4522A-C101LX CORDLESS TELEPHONE E235447 HAC SGYYMMXXXXXXG Use only supplied Battery Model: C1013LX FCC ID: VLJC100-LX-HSUS: BINW400BC101-LXIC: 4522A-C101LX CORDLESS TELEPHONE E235447 HA C Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1013LX CORDLESS TELEPHONE E235447 Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1013LX CORDLESS TELEPHONE E235447 BASE LABEL Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1013LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION. Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1013LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION.

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: C1014LX| Colour: Black | Country: US File: PL_C1014LX_ US_Black_v1 Contact: [email protected] Date: 2014-03-28 Version: 1 Label font: Moto Sans LABELS IN POSITION Handset Label Handset label size: W 43mm x H 16mm LABELS IN POSITION Engraving size: W50mm x H 35mm Base label size: W 49.5mm x H 34.5mm CHARGER LABEL Engraving size: W25mm x H 25mm Base label size: W 24.5mm x H 24.5mm SGYYMMXXXXXXG Use only supplied Battery Model: C1014LX FCC ID: VLJC100-LX-HS US: BINW400BC101-LX IC: 4522A-C101LX CORDLESS TELEPHONE E235447 HAC SGYYMMXXXXXXG Use only supplied Battery Model: C1014LXFCC ID: VLJC100-LX-HSUS: BINW400BC101-LXIC: 4522A-C101LX CORDLESS TELEPHONE E235447 HA C Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1014LX CORDLESS TELEPHONE E235447 Digital Cordless Telephone DC 7.5V/300mA SGYYMMXXXXXXG Made in China Model: C1014LX CORDLESS TELEPHONE E235447 BASE LABEL Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1014LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION. Digital Cordless Telephone DC 7.5V 300mA SGYYMMXXXXXXG Made in China IC: 4522A-C101LX RINGER EQUIVALENCE:0.0BUSOC JACK:RJ11C/W HAC Customer serivice number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: C1014LX CORDLESS TELEPHONE E235447 ONLY USE THE PROVIDED ADAPTOR! FCC ID: VLJC101-LX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Reg. No. US: BINW400BC101-LX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL E QUIPMENT & TECHNICAL SPECIFICATION.

ETC Report No. : 14-02-RBF-032-01 Sheet 4 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 7. Internal View of EUT ETC Report No. : 14-02-RBF-032-01 Sheet 5 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 8. Component View of PCB 9. Component View of PCB ETC Report No. : 14-02-RBF-032-01 Sheet 6 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 10. Solder View of PCB ETC Report No. : 14-02-RBF-032-01 Sheet 7 of 7 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Adapter 1. 2.

ETC Report No. : 14-02-RBF-032-01 Sheet 27 of 69 Sheet FCC ID:VLJC101-LX-BS Rev. No 1.0 6.11 Safety exposure levels 6.11.1 Standard Applicable FCC 15.319(i) UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091 and 2.1093, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, applicable. 6.11.2 Measurement procedure Consideration of radio frequency radiation exposure for EUT is done as SAR test according IEEE 1528 (for PP) □ MPE calculation as below (for FP, Repeater) ■ SAR test results: not applicable MPE calculation: The EUT is considered as a mobile device according to OET Bulletin 65, Edition –97- 01. Therefore distance to human body of min. 20 cm is determined. The limit of Power density for General Population / Umcontrolled Exposure is 1.0 mW/cm 2 . Formula: S = EIRP/4 TT R 2 Calculation: EIRP Radiated Power (dBm) 20.5 EIRP Radiated Power (mW) 112.202 R Disance (cm) 20 S Power Density (mW/cm 2 ) 0.0223 6.11.3 Results: Complies

FCC Part 15 Subpart D Test Report of E.U.T. : Digital Cordless Telephone (Base Unit) MODEL : C1011LX; C1012LX; C1013LX; C1014LX FCC ID. : VLJC101-LX-BS for APPLICANT : Binatone Electronics International Limited ADDRESS : Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU, LINKOU DIST., NEW TAIPEI CITY, TAIWAN, 24442, R.O.C. TEL : (02)26023052 FAX: (02)26010910 http ： // www.etc.org.tw; e-mail ： [email protected] Report Number : 14-02-RBF-032-01 ETC Report No. : 14-02-RBF-032-01 FCC ID:VLJC101-LX-BS Rev. No 1.0 TEST REPORT CERTIFICATION Applicant : Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Manufacturer : Shenzhen Guo Wei Electronics Co., Ltd. No.3038, Luosha Road, Liantang, Luohu District, Shenzhen, Guangdong, China Description of EUT a) Type of EUT : Digital Cordless Telephone (Base Unit) b) Trade Name : Motorola c) Model No. : C1011LX; C1012LX; C1013LX; C1014LX d) Power Supply : Adapter: I/P: 100-240Vac, 50-60Hz, 0.2A O/P: 7.5Vdc, 0.3A e) Frequency Range : 1921.536-1928.448MHz Regulation Applied : FCC Rules and Regulations Part 15 Subpart D I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.17-2006/ ANSI C63.4-2003, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. ETC Report No. : 14-02-RBF-032-01 FCC ID:VLJC101-LX-BS Rev. No 1.0 Date Test Item Received : Feb. 28, 2014 Date Test Campaign Completed : Mar. 11, 2014 Date of Issue : Apr. 17, 2014 Test Engineer : (Jiapeng Chen, En gineer ) Approve & Authorized Signer : S. S. Liou, Section Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : 14-02-RBF-032-01 FCC ID:VLJC101-LX-BS Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION ......................................................................................................1 1.1 Testing Laboratory ...................................................................................................................1 1.2 Client Information ....................................................................................................................1 1.3 Manufacturer ............................................................................................................................1 2 TEST INFORMATION................................................................................................................2 2.1 Descriptino of Tested Device(s) ..............................................................................................2 2.2 Test Environment .....................................................................................................................2 3 TEST REPORT SUMMARY.......................................................................................................3 3.1 Test Summary ..........................................................................................................................3 3.2 Devices for Tested System.......................................................................................................3 4 TEST SETUP.................................................................................................................................4 4.1 Frequency and Timing Measurements .....................................................................................4 4.2 Conducted Emission Tests .......................................................................................................4 4.3 Radiated Emission Tests ..........................................................................................................5 4.4 Power Line Conducted Tests ...................................................................................................5 5 TEST EQUIPMENT LIST ...........................................................................................................6 6 TEST RESULT..............................................................................................................................7 6.1 Corrdination with fixed microwave .........................................................................................7 6.2 Cross Reference .......................................................................................................................8 6.3 Labeling Requirements ............................................................................................................9 6.4 Power Line Conducted Emissions .........................................................................................10 6.5 Antenna Requirement.............................................................................................................17 6.6 digital Modulation Techniques ..............................................................................................17 6.7 Peak Power Output.................................................................................................................18 6.8 Power Spectral Density ..........................................................................................................22 6.9 Antenna Gain .........................................................................................................................26 6.10 Automatic discontinuation of transmission..........................................................................26 6.11 Safety exposure levels..........................................................................................................27 6.12 Emission Bandwidth B..........................................................................................................28 6.13 Emi…

Text truncated - open the document above for the full version.

FCC ID: VLJC101-LX-BS ETC Report No.: 14-03-MAS-218 IC ID: 4522A-C101LX Sheet 1 of 44 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D (15.323c) and Industry Canada RSS-213, Issue 2（4.3.4b） Report No.: 14-03-MAS-218 Client: Binatone Electronics International Limited Product: Digital Cordless Telephone Model: C1011LX (Multiple Model List please see page 4.) FCC ID: VLJC101-LX-BS IC ID: 4522A-C101LX Manufacturer/supplier: Shenzhen Guo Wei Electronics Co., Ltd. Date test item received: 2014/03/21 Date test campaign completed: 2014/03/28 Date of issue: 2014/04/03 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 44 pages Test Engineer Checked By Approved By John Li Perry Lin James Cheng FCC ID: VLJC101-LX-BS ETC Report No.: 14-03-MAS-218 IC ID: 4522A-C101LX Sheet 2 of 44 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION.........................................................................................................3 1.1 Testing Laboratory..................................................................................................................... 3 1.2 Client Information....................................................................................................................... 3 1.3 Manufacturer.............................................................................................................................. 3 2 TEST INFORMATION..................................................................................................................4 2.1 Description of Tested Device(s).............................................................................................. 4 2.2 Test Environment....................................................................................................................... 4 3 TEST REPORT SUMMARY........................................................................................................5 3.1 Test Summary............................................................................................................................ 5 3.2 Other Comments........................................................................................................................ 6 4 TEST SETUP.................................................................................................................................7 4.1 Monitoring Tests......................................................................................................................... 7 5 TEST EQUIPMENT LIST.............................................................................................................8 6 TEST RESULT...............................................................................................................................9 6.1 Monitoring time........................................................................................................................... 9 6.2 Monitoring threshold................................................................................................................ 10 6.3 Maximum transmit period....................................................................................................... 11 6.4 System Acknowledgement..................................................................................................... 13 6.5 Least Interfered Channel, LIC................................................................................................ 20 6.6 Random waiting....................................................................................................................... 31 6.7 Monitoring bandwidth and reaction time.............................................................................. 32 6.8 Monitoring antenna.................................................................................................................. 39 6.9 Monitoring threshold relaxation............................................................................................. 40 6.10 Duplex system LBT............................................................................................................... 41 6.11 Co-located device LBT......................................................................................................... 42 6.12 Fair Access............................................................................................................................. 43 A PPENDIX1 MANUFACTURER DECLARATION...................................................................................44 FCC ID: VLJC101-LX-BS ETC Report No.: 14-03-MAS-218 IC ID: 4522A-C101LX Sheet 3 of 44 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 1 GENERAL INFORMATION 1.1 Testing Laboratory Name: Electronic Testing Center, Taiwan Address: No. 8, Lane 29, Wenming Rd., Leshan Tsuen, Guishan Shiang, Taoyuan Country, 33383, Taiwan, R.O.C. Telephone: 886-3-3280026 Fax: 886-3-3276188 NVLAP lab registration #: 200133-0 IC OATS registration #: IC 2949-1 E-Mail: [email protected] 1.2 Client Information Name: Binatone Electronics International Limited Address: Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong 1.3 Manufacturer Name: Shenzhen Guo Wei Electronics Co., Ltd. Address: No.3038, Luosha Road, Liantang, Luohu District, Shenzhen, Guangdong, China FCC ID: VLJC101-LX-BS ETC Report No.: 14-03-MAS-218 IC ID: 4522A-C101LX Sheet 4 of 44 Sheets Ele…

Text truncated - open the document above for the full version.