VLJIT6-TX-HSDigital Cordless Telephone (Handset Unit)

Warning: Charge the handset for 24 hours before use. Motorola IT6 For IT6 and IT6-2 Digital Cordless Telephone with Answering Machine Welcome... to your new Motorola IT6 Digital Cordless Telephone with Answering Machine! • Answer machine with 30 minutes digital recording time. • All handsets fully cordless for locating anywhere within range. • 100 Name and number phonebook. • Bright backlit display. • Speakerphone for hands-free conversations. • Caller ID shows you who’s calling and see details of the last 50 callers in a Calls list. 1 • Redial up to 10 of the last numbers called. • Register up to 4 handsets to a single base. • Make internal calls, transfer external calls, hold 3-way conversation between two internal callers and an external caller. • Intelligent Charging saving unnecessary power usage. Need help? If you have any problems setting up or using your xxx, please contact Customer Services on 1-888-331-3383. Alternatively, you may find the answer in the ‘Help’ section at the back of this guide. 1 You must subscribe to your network provider’s Caller ID service for this feature to work. A subscription fee may be payable. Please note that this equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages. IMPORTANT Only use the telephone line cord supplied. Got everything? • Cordless handset • Cordless base • Power adaptor for the base • Telephone line cord If you have purchased an IT6 multiple pack you will also have the following additional items: • Cordless handset & charger • Power adaptor for the charger 4 1. Getting started .....................................................................7 2. Getting to know your phone ..............................................10 3. Using the phone .................................................................16 3.1 Make a call .....................................................................................................16 3.2 Pre-dial ...........................................................................................................16 3.3 Dial direct memory numbers 1 to 9...............................................................16 3.4 Call from the phonebook ..............................................................................16 3.5 Call from the Calls list ....................................................................................16 3.6 Answer a call ..................................................................................................16 3.7 Adjust volume ................................................................................................17 3.8 Mute ...............................................................................................................17 3.9 End a call ........................................................................................................17 3.10 Switch handset on/off ....................................................................................17 3.11 Intercom .........................................................................................................17 3.11.1 Call another handset...........................................................................17 3.11.2 Transfer an external call to another handset .......................................18 3.11.3 Three-party conference call ...............................................................18 3.12 Voicemail .......................................................................................................18 4. Phonebook .........................................................................19 4.1 View and dial phonebook entries .................................................................19 4.2 Store an entry .................................................................................................19 4.3 Entering names..............................................................................................19 4.4 Character map ...............................................................................................20 4.5 Enter a pause .................................................................................................20 4.6 View an entry .................................................................................................21 4.7 Edit an entry ...................................................................................................21 4.8 Delete an entry ..............................................................................................21 4.9 List entry .........................................................................................................21 4.10 Delete all entries ............................................................................................22 4.11 Store a direct memory number .....................................................................22 4.12 Delete a direct memory number...................................................................22 5. Caller ID and Calls list ........................................................23 51. Calls list ..........................................................................................................23 5.1.1 View the Calls list ................................................................................23 5.1.2 Dial from the Calls list .........................................................................24 5.1.3 Save a number from the Calls list to the phonebook .........................24 5.1.4 Delete a Calls list entry .......................................................................24 5.1.6 Delete entire Calls list ......................................…

Text truncated - open the document above for the full version.

ETC Report No. : 14-01-RBF-027-02 Sheet 1 of 5 Sheet FCC ID. : VLJIT6-TX-HS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 1. Top View of EUT 2. Bottom View of EUT ETC Report No. : 14-01-RBF-027-02 Sheet 2 of 5 Sheet FCC ID. : VLJIT6-TX-HS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 3. Front View of EUT 4. Side View of EUT ETC Report No. : 14-01-RBF-027-02 Sheet 3 of 5 Sheet FCC ID. : VLJIT6-TX-HS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 5. Rear View of EUT 6. Side View of EUT

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: IT.6.1TX| Colour: Black/Crystal | Country: US File: PL_IT.6.1TX_ US_Black/Crystal_v7 Contact: [email protected] Date: 2014-02-26 Version: 7 Label font: Moto Sans LABELS IN POSITION Handset Label Handset label size: W 32mm x H 23mm BASE LABEL LABELS IN POSITION Engraving size: W 50mm x H 42mm Base label size: W 51mm x H 43mm (R=2.5) E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6 E235447 ONLY USE THE PROVIDED ADAPTOR! Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6 E235447 ONLY USE THE PROVIDED ADAPTOR!

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: IT.6.2TX| Colour: Black/Crystal | Country: US File: PL_IT.6.2TX_ US_Black/Crystal_v8 Contact: [email protected] Date: 2014-02-26 Version: 8 Label font: Moto Sans BASE LABEL LABELS IN POSITION LABELS IN POSITION LABELS IN POSITION Engraving size: W 50mm x H 42mm Base label size: W 51mm x H 43mm (R=2.5) Charger LABEL Engraving size: W 25mm x H18mm Base label size: W24.5mm x H17.5mm (R=1) Handset Label Handset label size: W 32mm x H 23mm Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-2 E235447 Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-2 E235447 Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-2 E235447 ONLY USE THE PROVIDED ADAPTOR! Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-2 E235447 ONLY USE THE PROVIDED ADAPTOR! E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-2 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-2 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: IT.6.3TX| Colour: Black/Crystal | Country: US File: PL_IT.6.3TX_ US_Black/Crystal_v1 Contact: [email protected] Date: 2014-03-03 Version: 1 Label font: Moto Sans BASE LABEL LABELS IN POSITION LABELS IN POSITION LABELS IN POSITION Engraving size: W 50mm x H 42mm Base label size: W 51mm x H 43mm (R=2.5) Charger LABEL Engraving size: W 25mm x H18mm Base label size: W24.5mm x H17.5mm (R=1) Handset Label Handset label size: W 32mm x H 23mm Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-3 E235447 Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-3 E235447 Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-3 E235447 ONLY USE THE PROVIDED ADAPTOR! Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-3 E235447 ONLY USE THE PROVIDED ADAPTOR! E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-3 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-3 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC

PRODUCT LABEL ARTWORK Model: C401 GR Fil e: PL_C401_GR_v1.pdf Contact: [email protected] Date: 2 Mar 2011 Ver sion: 1 BASE Label size: W 50.5mm x H 17.9mm (r=1.5mm) SCALE 1:1 LABELS IN POSITION HANDSET SN label size: W 20mm x H 10mm S/N: YYMMTWXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX C401 Digital Cordless Telephone P/N: C38000D48O1AGR03 Made in China XXXXXXXXXXXX PRODUCT LABEL ARTWORK Model: IT.6.4TX| Colour: Black/Crystal | Country: US File: PL_IT.6.4TX_ US_Black/Crystal_v1 Contact: [email protected] Date: 2014-03-03 Version: 1 Label font: Moto Sans BASE LABEL LABELS IN POSITION LABELS IN POSITION LABELS IN POSITION Engraving size: W 50mm x H 42mm Base label size: W 51mm x H 43mm (R=2.5) Charger LABEL Engraving size: W 25mm x H18mm Base label size: W24.5mm x H17.5mm (R=1) Handset Label Handset label size: W 32mm x H 23mm Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-4 E235447 Digital Cordless Telephone DC 7.5V/200mA SGYYMMXXXXXXG Made in China Mode: IT6-4 E235447 Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-4 E235447 ONLY USE THE PROVIDED ADAPTOR! Digital Cordless Telephone DC 6.5V/7.5V 300/200mA SGYYMMXXXXXXG Made in China FCC ID: VLJIT6-TX-BS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. US: BINW400BIT6-TX PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. IC: 4522A-IT6TX COMPLIES WITH 47 CFR PA RT 68 AND IC CS-03 RULES. RINGER EQUIVALENCE:0.0B USOC JACK:RJ11C/W HAC THIS EQUIPMENT MEETS THE APPLICABLE INDUSTRY CANADA TERMINAL EQUIPMENT & TECHNICAL SPECIFICATION. Customer service number: US and Canada: 1-888-331-3383 Web: www.motorola.com Model: IT6-4 E235447 ONLY USE THE PROVIDED ADAPTOR! E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-4 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC E235447 SGYYMMXXXXXXG Use only supplied Battery Model: IT6-4 FCC ID: VLJIT6-TX-HS US: BINW400BIT6-TX IC: 4522A-IT6TX HAC

ETC Report No. : 14-01-RBF-027-02 Sheet 4 of 5 Sheet FCC ID. : VLJIT6-TX-HS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 7. Internal View of EUT 8. Internal View of EUT ETC Report No. : 14-01-RBF-027-02 Sheet 5 of 5 Sheet FCC ID. : VLJIT6-TX-HS Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 9. Component View of PCB 10. Solder View of PCB

A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l：886-3-271-0188 / Fax：886-3-271-0190 SAR EVALUATION REPORT Test Report No. ： 1403FS13 Applicant ： Binatone Electronics International Limited EUT Type ： Digital Cordless Telephone FCC ID ： VLJIT6-TX-HS Trade Name ： Motorola Model Number ： IT6, IT6-2, IT6-3, IT6-4 Date of Received ： Mar. 06, 2014 Test Period ： Mar. 04~Mar. 05, 2014 Date of Issued ： Mar. 10, 2014 Test Environment ： Ambient Temperature： 22 ±2 ° C Relative Humidity：40 - 70 % Test Specification ： Standard C95.1-1992 IEEE Std. 1528-2013 IEEE Std. 1528a-2005 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r03 KDB 865664 D02 RF Exposure Reporting v01r01 Max. SAR ： 0.01 W/kg UPCS Head SAR Test Lab Location ： Chang-an Lab 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. The test results in the report only apply to the tested sample. Approved By ： Tested By ： (Bill Hu) (Sky Chou) Report Number: 1403FS13Page 1 of 61 ©2014 A Test Lab Techno Corp. Contents 1. Description of Equipment under Test (EUT) .................................................................................................. 3 2. Introduction .................................................................................................................................................... 4 3. SAR Definition ............................................................................................................................................... 4 4. SAR Measurement Setup .............................................................................................................................. 5 5. System Components ..................................................................................................................................... 6 5.1 DASY5 E-Field Probe System......................................................................................................... 6 5.2 Data Acquisition Electronic (DAE) System ...................................................................................... 9 5.3 Robot ............................................................................................................................................... 9 5.4 Measurement Server ....................................................................................................................... 9 5.5 Device Holder for Transmitters ...................................................................................................... 10 5.6 Phantom - SAM v4.0 ..................................................................................................................... 10 5.7 Data Storage and Evaluation..........................................................................................................11 6. Test Equipment List ..................................................................................................................................... 14 7. Tissue Simulating Liquids ............................................................................................................................ 15 7.1 Ingredients ..................................................................................................................................... 16 7.2 Recipes.......................................................................................................................................... 16 7.3 Liquid Depth................................................................................................................................... 17 8. Measurement Process................................................................................................................................. 18 8.1 Device and Test Conditions ........................................................................................................... 18 8.2 Conducted power .......................................................................................................................... 18 8.3 SAR Testing with RF Transmitters................................................................................................. 19 8.4 System Performance Check.......................................................................................................... 21 8.5 Dosimetric Assessment Setup....................................................................................................... 23 8.6 Spatial Peak SAR Evaluation ........................................................................................................ 25 9. Measurement Uncertainty............................................................................................................................ 26 10. SAR Test Results Summary ........................................................................................................................ 29 10.1 Head SAR...................................................................................................................................... 29 10.2 Std. C95.1-1992 RF Exposure Limit .............................................................................................. 30 11. Conclusion ................................................................................................................................................... 31 12. SAR Measurement Guidance ........................................................................................…

Text truncated - open the document above for the full version.

FCC Part 15 Subpart D Test Report of E.U.T. : Digital Cordless Telephone (Handset Unit) MODEL : IT6, IT6-2, IT6-3, IT6-4 FCC ID. : VLJIT6-TX-HS for APPLICANT : Binatone Electronics International Limited ADDRESS : Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU, LINKOU DIST., NEW TAIPEI CITY, TAIWAN, 24442, R.O.C. TEL : (02)26023052 FAX: (02)26010910 http ： // www.etc.org.tw; e-mail ： [email protected] Report Number : 14-01-RBF-027-02 ETC Report No. : 14-01-RBF-027-02 FCC ID. : VLJIT6-TX-HS Rev. No 1.0 TEST REPORT CERTIFICATION Applicant : Binatone Electronics International Limited Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Manufacturer : Shenzhen Guo Wei Electronics Co., Ltd. No.3038, Luosha Road, Liantang, Luohu District, Shenzhen, Guangdong, China Description of EUT a) Type of EUT : Digital Cordless Telephone (HandsetUnit) b) Trade Name : Motorola c) Model No. : IT6, IT6-2, IT6-3, IT6-4 d) Power Supply : Battery: 3.7V, 277mAh e) Frequency Range : 1921.536-1928.448MHz Regulation Applied : FCC Rules and Regulations Part 15 Subpart D I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.17-2006/ ANSI C63.4-2003, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. ETC Report No. : 14-01-RBF-027-02 FCC ID. : VLJIT6-TX-HS Rev. No 1.0 Date Test Item Received : Jan. 20, 2014 Date Test Campaign Completed : Feb. 20, 2014 Date of Issue : Feb. 27, 2014 Test Engineer : (Jiapeng Chen, En gineer ) Approve & Authorized Signer : S. S. Liou, Section Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : 14-01-RBF-027-02 FCC ID. : VLJIT6-TX-HS Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION ......................................................................................................1 1.1 Testing Laboratory ...................................................................................................................1 1.2 Client Information ....................................................................................................................1 1.3 Manufacturer ............................................................................................................................1 2 TEST INFORMATION................................................................................................................2 2.1 Descriptino of Tested Device(s) ..............................................................................................2 2.2 Test Environment .....................................................................................................................2 3 TEST REPORT SUMMARY.......................................................................................................3 3.1 Test Summary ..........................................................................................................................3 3.2 Devices for Tested System.......................................................................................................3 4 TEST SETUP.................................................................................................................................4 4.1 Frequency and Timing Measurements .....................................................................................4 4.2 Conducted Emission Tests .......................................................................................................4 4.3 Radiated Emission Tests ..........................................................................................................5 4.4 Power Line Conducted Tests ...................................................................................................5 5 TEST EQUIPMENT LIST ...........................................................................................................6 6 TEST RESULT..............................................................................................................................7 6.1 Corrdination with fixed microwave .........................................................................................7 6.2 Cross Reference .......................................................................................................................8 6.3 Labeling Requirements ............................................................................................................9 6.4 Power Line Conducted Emissions .........................................................................................10 6.5 Antenna Requirement.............................................................................................................15 6.6 digital Modulation Techniques ..............................................................................................15 6.7 Peak Power Output.................................................................................................................16 6.8 Power Spectral Density ..........................................................................................................19 6.9 Antenna Gain .........................................................................................................................22 6.10 Automatic discontinuation of transmission..........................................................................22 6.11 Safety exposure levels..........................................................................................................23 6.12 Emission Bandwidth B..........................................................................................................24 6.13 Emissions inside and outside the subband ........…

Text truncated - open the document above for the full version.

FCC ID: VLJIT6-TX-HS ETC Report No.: 14-02-MAS-010-01 IC ID:4522A-IT6TX Sheet 1 of 42 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D (15.323c) and Industry Canada RSS-213, Issue 2（4.3.4b） Report No.: 14-02-MAS-010-01 Client: Binatone Electronics International Limited Product: Digital Cordless Telephone Model: IT6 (Multiple Model List please see page 4.) FCC ID: VLJIT6-TX-HS IC ID: 4522A-IT6TX Manufacturer/supplier: Shenzhen Guo Wei Electronics Co., Ltd. Date test item received: 2014/02/06 Date test campaign completed: 2014/02/19 Date of issue: 2014/03/04 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 42 pages Test Engineer Checked By Approved By John Li Perry Lin James Cheng FCC ID: VLJIT6-TX-HS ETC Report No.: 14-02-MAS-010-01 IC ID:4522A-IT6TX Sheet 2 of 42 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION.........................................................................................................3 1.1 Testing Laboratory..................................................................................................................... 3 1.2 Client Information...........................................................................................…

Text truncated - open the document above for the full version.