VNN-CB1000433MHz ASK Alarm Clock

User Guide TCL 100 Contents Analog Alarm Clock Features........ 3 Cordless Vibration Pad Features .. 4 Important Safety Instructions ...... 5 Included Equipment ....................... 6 Set Up .............................................. 6 LED Display Notifi cation ................ 8 Clock Functions .............................. 9 Help and Support ......................... 12 Troubleshooting Guide ................ 12 Maintenance and Warranty ......... 13 Technical Details ........................... 15 Instructions available in other languages at www.amplicomusa.com. 1 FCC Compliance 33 Clock Features 1 Snooze button/ Alarm light/ incoming call light/Stop alarm 2 LED: Power ON/ OFF/Battery ON/OFF 3 Alarm ON/OFF 4 5 6 7 8 9 10 11 12 14 13 15 16 TCL 100 Analog Alarm Clock Features 1 2 3 2 3 1 4 5 6 7 8 9 10 11 12 13 14 15 16 4 Volume control 5 Set one of 5 acoustic signals 6 Pitch 7 Vibration and Acoustics 8 Flashing lamp ON/OFF 9 Snooze delay 10 Clock illumination 11 Telephone line socket 12 Power adapter socket 13 Vibration pad socket 14 Set alarm time 15 Set time 16 Battery compartment (on underside) Service Center 4 Clock Features TCL100 Cordless Vibration Pad Features 1 2 3 4 5 1 2 3 4 5 1 LED: Alarm ON/ OFF/Battery charge low 2 Vibration pad ON/OFF 3 Battery compartment 4 Screws for battery compartment 5 Connection cable socket Service Center 6 Getting Started — Included Equipment Set up 1. Connecting the alarm clock i. Insert the supplied batteries in the clock’s battery compartment. Getting started Important: Pay attention to correct polarity when inserting the batteries. • 1 Analog Alarm Clock • 1 Power Adapter • 1 Vibration Pad • 1 Connector Cable for Vibration Pad • 2XAAA, 500mA Ni-MH Rechargable Battery for Alarm Clock • 3XAAA, 800mA Ni-MH Rechargeable Battery Pack for Vibration Pad • Telephone Cord • Operating Instructions • Battery Compartment Cover Service Center 8 LED Display Notifi cation Alarm Clock Face The following functions are on the alarm clock face: Red: Alarm function is activated. Flashing Orange: Alarm function is activated, and battery charge is low. Vibration Pad The following functions are on the vibration pad: Flashing Green Every 2 Seconds: Vibration pad is on. Red: Vibration pad is charging. Flashing Red: Battery charge is low. Getting startedGetting started Getting started 1-866-AMPLICOM (267-5426) 9 Clock Functions Setting the clock Turn the set time rotary knob until the clock shows the correct time. Setting the alarm Turn the alarm time rotary knob until the clock shows the correct time for the alarm to trigger. Turning the alarm on/off Turn the alarm on/off rotary knob clockwise for On. Counterclockwise for Off. Setting the volume Caution: The volume/acoustic signal/pitch can only be modifi ed if the alarm is on. If the alarm is off, those settings cannot be adjusted. Caution: The alarm and telephone ringer begin sounding at a low volume. The volume will then increase to the set maximum until the alarm is turned off or the telephone is answered. Turn the volume rotary knob to set the maximum volume for the alarm and telephone ringer. Set the volume to a quiet setting to start and increase it slowly to the desired maximum volume. Clock functions Service Center 10 Clock functions Caution: Exposure to the alarm at full volume for a long period could cause ear damage. Selecting the acoustic signal Turn the acoustic signal rotary knob to required acoustic signal. Setting the pitch Turn the pitch rotary knob to set the pitch. It may be possible to detect higher or lower pitch tones even at low volumes. Setting the clock face illumination Slide the illumination switch to set clock face illumination. The following settings are available: (From left to right) bright, medium or off. Selecting the alarm mode MODE Slide the alarm mode switch to set the type of alarm. There are three settings available: (from left to right) vibration only, acoustic signal only or acoustic signal and vibration. 1-866-AMPLICOM (267-5426) 11 Setting the fl ashing light ON OFF Slide the switch to set the light in the snooze button to fl ash during an alarm. There are two settings available: (from left to right) On and Off. Setting the snooze delay SNOOZE 0m 5m 15m Slide the snooze delay switch to set the snooze delay. There are three settings available: (from left to right) 0 min, 5 min, or 15 min. Activating the snooze delay Important: if the Snooze button is pressed when the light is switched off, the clock face will illuminate for 30 seconds to allow the user to see the time. After 30 seconds the illumination will go out. SNOOZE Press the snooze button to stop the alarm for a specifi ed time before it resumes. To activate the snooze function, see “Setting the snooze delay”. Activating the vibration pad After connecting the vibration pad, use the switch on the vibration pad to turn the vibration function on and off. There are two settings available: (from left to right) On and Off. Clock functions Service Center 12 Help and support If you have problems with your device, please refer to the following information before calling for support. If you continue to have problems, please call the Service Center at 1-866-AMPLICOM (267-5426) for further assistance. Troubleshooting guide My clock does not work 1. The battery charge may be too low or no batteries have been inserted. 2. The clock may not be plugged in. My vibration pad does not work 1. The battery charge may be too low or the battery is defective (additional Battery packs are available from Amplicom). 2. The vibration pad may not be switched on. 3. The vibration pad is too far away from the alarm clock. The alarm does not go off The alarm function is not switched on; turn the knob to “On”. Help and support 1-866-AMPLICOM (267-5426) 13 Maintenance and Warranty Maintenance • Please clean your equipment’s surfaces with a soft, lint-free cloth. • Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and t…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES External Photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 external photos - 1 of 4 INTERTEK TESTING SERVICES External Photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 external photos - 2 of 4 INTERTEK TESTING SERVICES External Photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 external photos - 3 of 4 INTERTEK TESTING SERVICES External Photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 external photos - 4 of 4

CB1000GNR0-USA-WH00 Packing Instruction for labels Page 2/4Rev02 Unit Back Model No.: TCL 100 Battery: 2 x Ni-MH AAA 1.2V 500mAh FCC ID: VNN-CB1000 Made in China P/N: 710-01000-02700-00 Desc: Handset label, TCL 100 AAA 1.2V 500mAh, RoHS Dsize: 26X10mm Color: black on white background Material: 50μ Location : Base Bottom Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) P/N: 710-01000-02600-02 Desc: base rating label RoHS Barcode format: UPC(A) for the product number Code 128 for the serial number Size: 52X36MM Size: 52X36MM Color: Black on White background Material: 50μ Location: Unit Back Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) Warning: Please remove the plug from the telephone socket before removing the battery compartment cover. P/N: 710-01000-03000-00 Desc: instruction label Dsize: 34 X 15 mm Color: black on white background Material: 50μ Location : Base bottom Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) M o d e l N o. : T C L 1 0 0 B a t t e r y : 2 x N i - M H A A A 1 . 2 V 5 0 0 m A h F C C I D : V N N - C B 1 0 0 0 M a d e i n C h i n a Warning: Please remove the plug from the telephone socket before removing the battery compartment cover Unit bottom This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Print the serial number here e.g.: MADE IN CHINA 881545901001 US:7ARTX05BCB1000 MODEL NO.: TCL 100 THIS UNIT COMPLIES WITH 47 CFR PART 68 FCC RULES. FCC REGISTRATION NO.:FCC ID: RINGER EQUIVALENCE NO.: 0.5B REQUIRED CONNECTOR: RJ11C/W VNN-CB1000 Rating 12VDC 670mA , Amplicom USA LLC New York, USA CLASS 2 G00218GC000001 E C H G CB1010GHR0-USA-BK00 Packing Instruction for labels Page 2/4 Rev02 Unit bottom P/N: 710-01010-01300-01 Desc: Handset label, TCL 200 AAA 1.2V 500mAh, RoHS Dsize: 26X10mm Color: black on white background Material: 50μ Location : Base Bottom Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) P/N: 710-01010-01200-02 Desc: base rating label RoHS Barcode format: UPC(A) for the product number Code 128 for the serial number Size: 52X36MM Color: Black on White background Material: 50μ Location: unit back Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) P/N: 710-01000-03000-00 Desc: instruction label Dsize: 34 X 15 mm Color: black on white background Material: 50μ Location : Base bottom Polyester white for auto-sticker (The material had been approved by UL. 材质必须通过UL认证) Model No.: TCL 200 Battery: 2 x Ni-MH AAA 1.2V 500mAh FCC ID: VNN-CB1010 Made in China Model No.: TCL 200 Battery: 2 x Ni-MH AAA 1.2V 500mAh FCC ID: VNN-CB1000 Made in China M o d e l N o. : T C L 2 0 0 B a t t e r y : 2 x N i - M H A A A 1 . 2 V 5 0 0 m A h F C C I D : V N N - C B 1 0 0 0 M a d e i n C h i n a Warning: Please remove the plug from the telephone socket before removing the battery compartment cover. Warning: Please remove the plug from the telephone socket before removing the battery compartment cover Unit Back Unit bottom E C H G This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Print the serial number here e.g.: MADE IN CHINA 851545901002 MODEL NO.: TCL 200 THIS UNIT COMPLIES WITH 47 CFR PART 68 FCC RULES. FCC REGISTRATION NO.:FCC ID: RINGER EQUIVALENCE NO.: 0.5B REQUIRED CONNECTOR: RJ11C/W US:7ARTX05BCB1000 VNN-CB1000 Rating 12VDC 670mA , Amplicom USA LLC New York, USA CLASS 2 G00218GC000001 E C H G

INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 1 of 11 Alarm Clock Battery compartment Alarm Clock assembly (View 1) INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 2 of 11 Alarm Clock assembly (View 2) Alarm Clock assembly (View 3) INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 3 of 11 Alarm Clock assembly (View 4) Alarm Clock Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 4 of 11 Alarm Clock Main PCB comp side (View 2) Alarm Clock Main PCB solder side INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 5 of 11 Alarm Clock PCB Alarm Clock processor PCB solder side INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 6 of 11 Alarm Clock module PCB comp side (View 1) Alarm Clock module PCB comp side (View 2) INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 7 of 11 Alarm Clock module PCB comp side (View 3) Alarm Clock module PCB solder side INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 8 of 11 Alarm Clock PCB comp side Alarm Clock PCB solder side (View 1) INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 9 of 11 Alarm Clock PCB solder side (View 2) Alarm Clock Snooze button PCB comp side INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 10 of 11 Alarm Clock Snooze button PCB solder side Alarm Clock Power PCB comp side INTERTEK TESTING SERVICES Internal photos – Model: CB1000GNR0 FCC ID: VNN-CB1000 internal photos - 11 of 11 Alarm Clock Power PCB solder side

INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 1 of 9 Alarm Clock Battery compartment Alarm Clock assembly (View 1) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 2 of 9 Alarm Clock assembly (View 2) Alarm Clock assembly (View 3) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 3 of 9 Alarm Clock Main PCB comp side (View 1) Alarm Clock Main PCB comp side (View 2) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 4 of 9 Alarm Clock Main PCB solder side (View 1) Alarm Clock Main PCB solder side (View 2) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 5 of 9 Alarm Clock Antenna location Alarm Clock processor PCB solder side INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 6 of 9 Alarm Clock PCB comp side (View 1) Alarm Clock PCB comp side (View 2) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 7 of 9 Alarm Clock PCB solder side Alarm Clock Display PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 8 of 9 Alarm Clock Display PCB comp side (View 2) Alarm Clock Display PCB solder side INTERTEK TESTING SERVICES Internal photos – Model: CB1010GHR0 FCC ID: VNN-CB1000 internal photos - 9 of 9 Alarm Clock Power PCB comp side Alarm Clock Power PCB solder side

INTERTEK TESTING SERVICES Transmitter Timing Plots FCC ID: VNN-CB1000 5s - 1 of 2 Ringing stops Alarm triggers INTERTEK TESTING SERVICES Transmitter Timing Plots FCC ID: VNN-CB1000 5s - 2 of 2 Alarm stops

INTERTEK TESTING SERVICES Occupied Bandwidth Plots FCC ID: VNN-CB1000 bw - 1 of 1 Plot B1

Model no.: CB1000GNR0 Report no.: HK10051668-1 Clock & Alarm Mode AC Mains Ctrl No.: N/A 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Date: 5.AUG.2010 17:04:47 Model no.: CB1000GNR0 Report no.: HK10051668-1 Clock & Alarm Mode AC Mains Ctrl No.: N/A EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 150 kHz 49.73 N gnd -16.26 1 Quasi Peak 253.5 kHz 38.32 L1 gnd -23.32 1 Quasi Peak 343.5 kHz 36.77 N gnd -22.34 1 Quasi Peak 411 kHz 33.57 N gnd -24.05 1 Quasi Peak 577.5 kHz 28.62 N gnd -27.37 1 Quasi Peak 1.0815 MHz 34.22 L1 gnd -21.77 2 CISPR Average1.509 MHz 26.36 N gnd -19.63 1 Quasi Peak 1.5135 MHz 40.93 L1 gnd -15.06 1 Quasi Peak 1.68 MHz 45.99 L1 gnd -10.00 2 CISPR Average1.68 MHz 30.69 L1 gnd -15.30 1 Quasi Peak 2.805 MHz 37.48 N gnd -18.52 2 CISPR Average2.9445 MHz 21.74 L1 gnd -24.25 2 CISPR Average3.813 MHz 23.13 L1 gnd -22.86 1 Quasi Peak 3.8625 MHz 39.21 N gnd -16.78 1 Quasi Peak 4.677 MHz 38.94 L1 gnd -17.05 2 CISPR Average4.677 MHz 23.16 L1 gnd -22.83 1 Quasi Peak 7.728 MHz 38.79 N gnd -21.20 1 Quasi Peak 8.6505 MHz 41.64 N gnd -18.35 Date: 5.AUG.2010 17:04:39 Model no.: CB1000GNR0 Report no.: HK10051668-1 Ringing Mode AC Mains Ctrl No.: N/A 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Date: 5.AUG.2010 17:08:58 Model no.: CB1000GNR0 Report no.: HK10051668-1 Ringing Mode AC Mains Ctrl No.: N/A EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 154.5 kHz 48.46 L1 gnd -17.29 1 Quasi Peak 352.5 kHz 39.87 L1 gnd -19.02 1 Quasi Peak 1.0815 MHz 35.71 L1 gnd -20.28 1 Quasi Peak 1.1445 MHz 33.54 L1 gnd -22.45 1 Quasi Peak 1.662 MHz 47.53 N gnd -8.46 2 CISPR Average1.725 MHz 30.51 N gnd -15.48 1 Quasi Peak 2.5305 MHz 38.56 N gnd -17.43 1 Quasi Peak 3.7455 MHz 41.05 N gnd -14.94 1 Quasi Peak 4.7265 MHz 42.16 N gnd -13.83 1 Quasi Peak 7.44 MHz 39.05 L1 gnd -20.94 1 Quasi Peak 8.943 MHz 43.38 L1 gnd -16.61 Date: 5.AUG.2010 17:08:47 Model no.: CB1010GHR0 Report no.: HK10051671-1 Clock & Alarm Mode AC Mains Ctrl No.: N/A 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Date: 5.AUG.2010 17:18:54 Model no.: CB1010GHR0 Report no.: HK10051671-1 Clock & Alarm Mode AC Mains Ctrl No.: N/A EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 154.5 kHz 44.31 N gnd -21.44 1 Quasi Peak 357 kHz 38.89 N gnd -19.90 1 Quasi Peak 496.5 kHz 34.51 N gnd -21.54 1 Quasi Peak 735 kHz 32.32 L1 gnd -23.67 1 Quasi Peak 1.086 MHz 32.99 N gnd -23.01 1 Quasi Peak 1.509 MHz 40.12 L1 gnd -15.87 2 CISPR Average1.5225 MHz 29.91 L1 gnd -16.08 2 CISPR Average1.6485 MHz 32.33 N gnd -13.66 1 Quasi Peak 1.6935 MHz 44.90 N gnd -11.09 1 Quasi Peak 2.679 MHz 35.20 N gnd -20.79 1 Quasi Peak 3.993 MHz 38.73 N gnd -17.26 2 CISPR Average4.0875 MHz 25.67 L1 gnd -20.32 2 CISPR Average4.47 MHz 26.45 L1 gnd -19.54 1 Quasi Peak 4.659 MHz 39.08 L1 gnd -16.91 1 Quasi Peak 7.926 MHz 40.32 L1 gnd -19.68 1 Quasi Peak 8.5605 MHz 42.26 L1 gnd -17.73 2 CISPR Average28.9995 MHz 31.70 N gnd -18.29 Date: 5.AUG.2010 17:18:45 Model no.: CB1010GHR0 Report no.: HK10051671-1 Ringing Mode AC Mains Ctrl No.: N/A 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Date: 5.AUG.2010 17:24:18 Model no.: CB1010GHR0 Report no.: HK10051671-1 Ringing Mode AC Mains Ctrl No.: N/A EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 150 kHz 49.66 L1 gnd -16.34 1 Quasi Peak 357 kHz 42.78 L1 gnd -16.01 1 Quasi Peak 496.5 kHz 37.01 L1 gnd -19.04 1 Quasi Peak 735 kHz 35.42 L1 gnd -20.57 1 Quasi Peak 964.5 kHz 30.14 N gnd -25.85 1 Quasi Peak 1.482 MHz 39.63 N gnd -16.36 2 CISPR Average1.5135 MHz 29.20 L1 gnd -16.79 1 Quasi Peak 1.6935 MHz 49.82 N gnd -6.17 2 CISPR Average1.7205 MHz 35.68 N gnd -10.31 2 CISPR Average2.5665 MHz 25.57 L1 gnd -20.43 1 Quasi Peak 2.769 MHz 39.99 L1 gnd -16.00 1 Quasi Peak 3.633 MHz 41.98 L1 gnd -14.01 2 CISPR Average3.8265 MHz 27.55 L1 gnd -18.44 1 Quasi Peak 4.7445 MHz 41.48 N gnd -14.51 2 CISPR Average4.983 MHz 27.74 N gnd -18.25 2 CISPR Average6.369 MHz 26.54 N gnd -23.46 1 Quasi Peak 7.6245 MHz 43.22 N gnd -16.77 1 Quasi Peak 8.655 MHz 43.22 L1 gnd -16.77 2 CISPR Average8.7315 MHz 29.96 L1 gnd -20.03 2 CISPR Average28.9995 MHz 31.60 N gnd -18.39 Date: 5.AUG.2010 17:24:08

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: HK10051668-1 Application for Original Grant of 47 CFR Part 15 Certification 433MHz ASK Alarm Clock FCC ID: VNN-CB1000 Prepared and Checked by: Approved by: Koo Wai Ip Nip Ming Fung, Melvin Lead Engineer Supervisor November 11, 2010 November 11, 2010 INTERTEK TESTING SERVICES Test Report Number: HK10051668-1 Page 1 of 20 FCC ID: VNN-CB1000 GENERAL INFORMATION Applicant Name: Global China Technology Limited Applicant Address: Room 308, 3/F., Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Hong Kong. FCC Specification Standard: FCC Part 15: 2008 FCC ID: VNN-CB1000 FCC Model(s): CB1000GNR0, CB1010GHR0, TCL 100, TCL 200 Type of EUT: Transmitter Description of EUT: 433MHz ASK Alarm Clock Serial Number: N/A Sample Receipt Date: May 31, 2010 Date of Test: July 28-August 17, 2010 Report Date: November 11, 2010 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: HK10051668-1 Page 2 of 20 FCC ID: VNN-CB1000 Table of Contents 1.0 Summary of Test Results................................................................................... 3 2.0 General Description............................................................................................ 5 2.1 Product Description ............................................................................................ 5 2.2 Test Methodology............................................................................................... 6 2.3 Test Facility........................................................................................................ 6 3.0 System Test Configuration................................................................................. 8 3.1 Justification ........................................................................................................ 8 3.2 EUT Exercising Software.................................................................................... 9 3.3 Details of EUT and Description of Accessories................................................. 10 3.4 Measurement Uncertainty ................................................................................ 10 3.5 Equipment Modification .................................................................................... 10 4.0 Test Results....................................................................................................... 12 4.1 Field Strength Calculation................................................................................. 12 4.2 Radiated Emissions.......................................................................................... 13 4.2.1 Radiated Emission Configuration Photograph ................................................ 13 4.2.2 Radiated Emission Data ................................................................................ 13 4.2.3 Transmitter Duty Cycle Calculation ................................................................ 13 4.3 Transmitter Bandwidth and 5-Second Transmission ......................................... 18 4.3.1 Measured Bandwidth..................................................................................... 18 4.3.2 5-Second Transmission Requirement ............................................................ 18 4.4 AC Power Line Conducted Emission ................................................................ 19 4.4.1 AC Power Line Conducted Emission Configuration Photograph..................... 19 4.4.2 AC Power Line Conducted Emission Data ..................................................... 19 5.0 Equipment List................................................................................................. 20 Appendix – Exhibits for Application of Certification INTERTEK TESTING SERVICES Test Report Number: HK10051668-1 Page 3 of 20 FCC ID: VNN-CB1000 1.0 Summary of Test Results Test Items FCC Part 15 Section Results Details see section Antenna Requirement 15.203 Pass 2.1 Radiated Emission Timing Bandwidth 15.231(b) & 15.109 15.231(a) 15.231(c) Pass Pass Pass 4.2 4.3.2 4.3.1 Radiated Emission in Restricted Bands 15.205 Pass 4.2 AC Power Line Conducted Emission 15.207 & 15.107 Pass 4.4 Note: Pursuant to FCC Part 15 Section 15.215(c), the 20dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over expected variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Test Report Number: HK10051668-1 Page 4 of 20 FCC ID: VNN-CB1000 EXHIBIT 2 GENERAL DESCRIPTION INTERTEK TESTING SERVICES Test Report Number: HK10051668-1 Page 5 of 20 FCC ID: VNN-CB1000 2…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1000GNR0 FCC ID: VNN-CB1000 config photos (radiated emission – alarm clock) - 1 of 2 Radiated Emission – Alarm Clock Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1010GHR0 FCC ID: VNN-CB1000 config photos (radiated emission – alarm clock) - 2 of 2 Radiated Emission – Alarm Clock Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1000GNR0 FCC ID: VNN-CB1000 config photos (conducted emission) - 1 of 4 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1000GNR0 FCC ID: VNN-CB1000 config photos (conducted emission) - 2 of 4 Conducted Emission Left Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1010GHR0 FCC ID: VNN-CB1000 config photos (conducted emission) - 3 of 4 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Model: CB1010GHR0 FCC ID: VNN-CB1000 config photos (conducted emission) - 4 of 4 Conducted Emission Left Side View