Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 1 | 90 | 136 MHz - 174 MHz | 50 W | 10K2F3E | 2.5000000000
ppm |
Grant NotesOutput power listed is rated conducted; maximum conducted output power is 60 W as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.
90.295(s) The output power shall not exceed by more than 20 percent either the output power shown in the Radio Equipment List [available in accordance with �90.203(a)(1)] for transmitters included in this list or when not so listed, the manufacturer's rated output power for the particular transmitter specifically listed on the authorization.