VUI-WBPNWireless-N Bridge Phone Adapters

Cisco Systems, Inc. www.cisco.com Small Business Support www.cisco.com/go/sbsc Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R) Copyright © 2011 Cisco Systems, Inc. All rights reserved. Quick Start Guide 78-20173-01 Cisco Small Business WBPN Wireless-N Bridge for Phone Adapters Before You Begin Before you begin the installation, make sure that you have the following equipment and information: •Power Supply for your Small Business IP Phone (not included) •PC to use the web-based system management tools to configure the WBPN (required if you are not using Wi-Fi Protected Setup) 1 Configuring the Wireless-N Bridge for Phone Adapters WBPN Connections 1Power adapter port 2WBPN power cable 3Network cable 4Reset button 5Wi-Fi Protected Setup (WPS) button 2 283688 123 4 56 7 8 Phone Connections 6WLAN LED 7WPS LED 8System LED 1Power adapter port 2Ethernet port 283689 1 2 78-20173-01 Printed in China PRC Connecting the WBPN If your wireless device supports Wi-Fi Protected Setup (WPS), you can connect the WBPN to the phone and use WPS to connect the phone your network. If you do not use WPS, you must connect the WBPN to a PC and use a web browser to configure it. See the User Guide located on Cisco.com for more information. (For the location, see the Where to Go from Here section.) 1If the IP phone power adapter is connected to your IP phone, disconnect it. 2Unplug the IP phone power adapter from the power source. 3Connect the WBPN power cable to the power port on the IP phone (labeled #1 in the “Phone Connections” graphic). 4Connect the network cable from the WBPN to the Ethernet port on the IP phone (labeled #2 in the “Phone Connections” graphic). 5Connect the IP phone power adapter to the power port on the WBPN (labeled #1 in the “WBPN Connections” graphic). 6(Optional) Place the WBPN inside the hollow desktop phone stand. See the User Guide for more information. 7Plug the IP phone power adapter into the power source. Using the WPS Push Button Method 1After all connections are made and devices are powered on, press the WPS button on your wireless device. 2Press the WPS button on the WBPN. The WPS LED on the WBPN flashes blue during the discovery period. 3After the WBPN establishes a connection to the wireless device, the WPS LED displays solid blue, and the WLAN LED will display either solid green or flashing green, depending on network activity. Using the WPS PIN Method 1Connect the WBPN and power on all devices as previously described. 2On the bottom of the WBPN unit, locate the label and make note of the PIN. The PIN is a unique numeric code printed on the label. 3Connect to your wireless device’s web interface using a web browser. Your computer must be connected to your wireless network. 4In your router or device’s WPS menu, enter the WBPN’s PIN into the field that allows you to set up wireless devices using a PIN. 5Save your changes. The device should automatically connect to the WBPN. After the WBPN establishes a connection to the wireless device, the WPS LED displays solid blue, and the WLAN LED will display either solid green or flashing green, depending on network activity. Where to Go from Here Cisco Small Business Support Community: www.cisco.com/go/ smallbizsupport Phone Support Contacts: www.cisco.com/support Product Documentation: www.cisco.com/go/smallbizphones Click on the “Voice Gateways and Accessories” tab. Cisco Small Business Home: www.cisco.com/smb 3 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 112 Taiwan Tel: +886-2-81439001 Fax: +886-2-28987364 Declaration for no non-US channel operation We, PEGATRON CORPORATION declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: VUI-WBPN If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you!

Block Diagram

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

label position

Page 3 Page 4 Page 5 Page 6 Page 7

FCC ID: VUI-WBPN Report No.: RF110823C29 OPERATIONAL DESCRIPTION This device is a Wireless-N Bridge Phone Adapters which operates in 2.4GHz band; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 5Vdc or 12Vdc from power adapter. The antenna is PIFA antenna with MHF antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA110823C29 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110823C29 MODEL NO.: WBPN FCC ID: VUI-WBPN RECEIVED: Aug. 23, 2011 TESTED: Sep. 13 ~ Sep. 30, 2011 ISSUED: Oct. 04, 2011 APPLICANT: PEGATRON CORPORATION ADDRESS: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 112, TAIWAN (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110823C29 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. RF EXPOSURE............................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)...................................... 5 2.2 MPE CALCULATION FORMULA ................................................................................. 5 2.3 CLASSIFICATION ........................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER............................... 5 Report No.: SA110823C29 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Oct. 04, 2011 Report No.: SA110823C29 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: Wireless-N Bridge Phone Adapters MODEL NO.: WBPN BRAND: CISCO APPLICANT: PEGATRON CORPORATION TESTED: Sep. 13 ~ Sep. 30, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: WBPN) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Oct. 04, 2011 Pettie Chen / Specialist APPROVED BY : , DATE :Oct. 04, 2011 Gary Chang / Technical Manager Report No.: SA110823C29 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 25 2 20 0.100 1.00

Report No.: RF110823C29 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110823C29 MODEL NO.: WBPN FCC ID: VUI-WBPN RECEIVED: Aug. 23, 2011 TESTED: Sep. 13 ~ Sep. 30, 2011 ISSUED: Oct. 04, 2011 APPLICANT: PEGATRON CORPORATION ADDRESS: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 112, TAIWAN (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 84 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110823C29 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD......................................................................................... 4 1. CERTIFICATION...................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 6 3. GENERAL INFORMATION ...................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT........................................................................ 7 3.2 DESCRIPTION OF TEST MODES.......................................................................... 9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 13 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 13 4. TEST TYPES AND RESULTS ............................................................................... 14 4.1 RADIATED EMISSION MEASUREMENT ............................................................. 14 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT........................................... 14 4.1.2 TEST INSTRUMENTS .......................................................................................... 15 4.1.3 TEST PROCEDURES ........................................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 16 4.1.5 TEST SETUP ........................................................................................................ 17 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 17 4.1.7 TEST RESULTS .................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 32 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...................................... 32 4.2.2 TEST INSTRUMENTS .......................................................................................... 32 4.2.3 TEST PROCEDURES ........................................................................................... 33 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 33 4.2.5 TEST SETUP ........................................................................................................ 34 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 34 4.2.7 TEST RESULTS .................................................................................................... 35 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 39 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 39 4.3.2 TEST INSTRUMENTS .......................................................................................... 39 4.3.3 TEST PROCEDURE ............................................................................................. 39 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 39 4.3.5 TEST SETUP ........................................................................................................ 40 4.3.6 EUT OPERATING CONDITIONS .......................................................................... 40 4.3.7 TEST RESULTS .................................................................................................... 41 4.4 MAXIMUM OUTPUT POWER ............................................................................... 45 Report No.: RF110823C29 3 Report Format Version 4.0.0 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT ............................... 45 4.4.2 INSTRUMENTS..................................................................................................... 45 4.4.3 TEST PROCEDURES ........................................................................................... 45 4.4.4 DEVIATION FROM TEST STANDARD ................................................................. 46 4.4.5 TEST SETUP ........................................................................................................ 46 4.4.6 EUT OPERATING CONDITIONS .......................................................................... 46 4.4.7 TEST RESULTS .................................................................................................... 47 4.5 POWER SPECTRAL DENSITY MEASUREMENT............................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Test Mode A) 2 CONDUCTED EMISSION TEST (Test Mode B) 3 RADIATED EMISSION TEST (Test Mode A) 4 RADIATED EMISSION TEST (Test Mode B)