W2Y-L7NF13VXElectronic Furniture Lock

Content Page General Descripti on / Technical Specifi cati ons / Safety Precauti ons .......................................2 Care and Maintenance / Factory Setti ngs / Functi onal Descripti on .........................................3 Overview of transponder cards ................................................................................................4 System components and package contents ............................................................................5 Dimensions / Directi on of rotati ng ...........................................................................................6 Mounti ng on wood / Mounti ng on glas ...................................................................................7 Mounti ng on steel / Mounti ng on HPL .....................................................................................8 Emergency opening with service key / Getti ng started and changing batt eries ......................9 Tips for the following programming steps / Bolti ng end positi on monitoring Using the installati on card ......................................................................................................10 Programming the Master card / Prog. the User Cards ...........................................................11 Closing and Opening / Unauthorised Transponder Cards / Facility Manager Functi on .........12 Emergency Opening / Deleti ng Individual Transponder Cards ...............................................13 Deleti ng all Transponder Cards / Changing the Operati ng Mode ..........................................14 Deacti vati ng and Acti vati ng Acousti c Signals ........................................................................15 Resetti ng to Factory Setti ng ...................................................................................................16 Acti vati on and Deacti vati on of Automati c Locking / Acti vati on and Deacti vati on of Unlimited Shared Use ........................................................................................................17 Batt ery Warning / Reordering Master Cards / Regulatory Informati on .................................18 Firmware Update / Disposal / Trouble Shouti ng ....................................................................19 www.lehmann-locks.com Operati ng Instructi ons  VERTO RFID MIFARE BDA VERTO RFID MIFARE® / 2026-07-13 (GB) BDA VERTO RFID MIFARE® / 2026-07-13 (GB) 2 GENERAL DESCRIPTION The VERTO RFID MIFARE lock is a batt ery-operated electronic furniture lock based on RFID technology, which is intended for the inside of buildings. These operati ng instructi ons provide you with informati on on how to operate the locking system without errors. Keep the operati ng instructi ons in an easily accessible place. Improper use can destroy the locking system and lead to the loss of any warranty claims. Please be sure to observe all warnings and read the operati ng instructi ons completely before proceeding with installati on, commissioning and programming. It may be possible to use our locks and locking systems together with mechanisms made by other manufacturers, but their compati bility must be checked in each individual case. We cannot accept any liability for damage or loss due to incompati bility. Wording and graphics have been prepared with care. However, no liability will be assumed for any mistakes that mayhave occurred. Technical specifi cati ons as well as the scope of items in the system are subject to change without noti ce. CAUTION: The lock can be confi gured with master and programming cards or with the LEHMANN Management Soft ware LMS. These operati ng instructi ons describe how to use the locking system with master and programming cards. The soft ware LMS and the corresponding documents can be found at htt ps:// lms.lehmann-locks.com. TECHNICAL SPECIFICATIONS Frequency 13,56 MHz Nati onal legislati on about permissible radio frequencies must be observed. RFID technologie MIFARE® Classic, MIFARE® DESFire® EV1, EV2 Supported transponders Compati ble with the following RFID transponders: • MIFARE® Classic / • MIFARE® DESFire® / • ISO 14443A / • ISO 15693 Existi ng transponders must be checked for compati bility. „Shared Use“ mode is generally not supported for MIFARE Classic transponders. MIFARE Classic transponders are only processed to a limited extent in the LMS via the UID. To use the LEHMANN Transponder App via NFC technology on smartphones, please note the requirements: - Master card or LMS release 2.3 or higher - Lock fi rmware 2.3 or higher - iPhone XS with iOS 17.4 or higher, and iPhones only within the European Economic Area - Reading distance depends on the smartphone and the installati on situati on and must be checked in advance. Energy supply Batt erietyp: 1 x CR2 Operati ng temperature -5 °C to +60 °C Storage temparature -25 °C to +70 °C Type designati on L7NF13VX SAFETY PRECAUTIONS → Pack the batt ery for the transport of the lock so that no short circuit can occur (risk of explosion and fi re). → When replacing the batt ery, make sure that the polarity and positi on of the batt ery is correct! → Dispose of used batt eries properly! ! Conti nue on page 3 BDA VERTO RFID MIFARE® / 2026-07-13 (GB) 3 CARE AND MAINTENANCE → Do not spill any liquid over or into the individual components of the lock, and never immerse the components in any liquid. → Clean the lock and the components with a clean, soft , damp cloth only. → Do not use any cleaning agents containing abrasives or solvents, as these may damage the housing. → Treati ng any of the electronic and mechanical components improperly or in any way other than described in these operati ng instructi ons may lead to malfuncti ons and the loss of warranty. → Change the batt ery in good ti me. At the latest, when the lock issues corresponding batt ery warnings. FACTORY SETTINGS The lock can be closed and opened at this point of ti me with one or more installati on cards. Aft er a Maste…

Text truncated - open the document above for the full version.

Phone: +49(0)5235-9500-0 NMi TESTLAB GmbH [email protected] Königswinkel 10 www.nmi-testlab.de 32825 Blomberg, Germany To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation FCC Justification Statement about Antenna Gain Information This device complies with the FCC limits for fundamental and spurious emissions solely by radiated measurements as documented in the test report. Therefore, neither antenna manufacturers data sheets, antenna reference design specification nor Antenna Under Test (AUT) reports as required for the FCC certification under CFR 47 Part 15. FCC ID: W2Y-L7NF13VX FCC Rule Part Section: §15.209 Type of device: Furniture Lock with RFID If you have any questions, please feel free to contact me. Contact Person: Sabrina Berghahn Position in the Company: Assistant Test Laboratory RADIO & Authorised Agent

Phone: +49(0)5235-9500-0 NMi TESTLAB GmbH [email protected] Königswinkel 10 www.nmi-testlab.de 32825 Blomberg, Germany To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Long/Short-term Confidentiality Request FCC ID: W2Y-L7NF13VX To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below: ☒ Schematics ☒ Parts List ☒ Block Diagram ☐ Tune-Up Info ☒ Operational Description In addition, we also request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure ☐ for an initial period of days ☐ until: ☒ not applicable ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Contact Person: Sabrina Berghahn Position in the Company: Assistant Test Laboratory RADIO & Authorised Agent

External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 1 of 8 EUT, view 1 External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 2 of 8 EUT, view 2 External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 3 of 8 EUT, view 3 External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 4 of 8 EUT, view 4 External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 5 of 8 EUT, view 5 External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 6 of 8 EUT, view 6 with type Plate External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 7 of 8 TAG top view External Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 8 of 8 TAG bottom view ----- End of Annex B -----

Phone: +49(0)5235-9500-0 NMi TESTLAB GmbH [email protected] Königswinkel 10 www.nmi-testlab.de 32825 Blomberg, Germany Lable Location Information (provided by the applicant)

Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 1 of 7 EUT, housing opened and PCB removed Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 2 of 7 EUT, housing with lock Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 3 of 7 EUT, inner housing part Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 4 of 7 EUT, inner housing part Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 5 of 7 PCB, top view Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 6 of 7 PCB, bottom view Internal Photographs Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 7 of 7 PCB, red marked antenna ----- End of Annex C -----

FCC RF Exposure Evaluation Report Number: F260611E3 Equipment under Test (EUT): RFID furniture lock Verto RFID MIFARE Applicant: Martin Lehmann GmbH & Co. KG Manufacturer: Martin Lehmann GmbH & Co. KG Königswinkel 10 32825 Blomberg, Germany +49 5235 / 9500-0 [email protected] www.nmi-testlab.de Examiner:Michael DINTERReport Number: F260611E3 Date of Issue: 28.08.2026Order Number: 26-110611Page 2 of 12 References [1] CFR 47 Rule part 1Practice and Procedure [2] CFR 47 Rule part 2Frequency Allocations and Radio Treaty Matters; General Rules and Regulations [3] KDB 447498 D04Interim General RF Exposure Guidance v01 This evaluation report is only valid in its original form. Any reproduction of its contents in extracts without written permission of the accredited test laboratory NMi TESTLAB GmbH is prohibited. The results herein refer only to the evaluated sample. NMi TESTLAB GmbH is not responsible for any generalisations or conclusions drawn from these results concerning further samples. Any modification of the evaluated samples is prohibited and leads to the invalidity of this report. Each page necessarily contains the NMi TESTLAB Logo and the EVALUATION REPORT NUMBER. Assessed and written by: Signature Reviewed and approved by: Signature Examiner:Michael DINTERReport Number: F260611E3 Date of Issue: 28.08.2026Order Number: 26-110611Page 3 of 12 Contents:Page Identification ........................................................................................................................... 4 1.1 Applicant ............................................................................................................................................ 4 1.2 Manufacturer ..................................................................................................................................... 4 1.3 Test Laboratory ................................................................................................................................. 4 1.4 EUT (Equipment under Test) ............................................................................................................. 5 1.5 Technical Data of Equipment ............................................................................................................ 6 Evaluation Method .................................................................................................................. 7 2.1 RF exposure test exemptions for single sources ............................................................................. 7 2.1.1 General Exemption CFR 47 §1.1307(b)(3)(i)(A) ........................................................................ 7 2.1.2 SAR Based Exemption CFR 47 §1.1307(b)(3)(i)(B) ................................................................... 7 2.1.3 MPE Based Exemption CFR 47 §1.1307(b)(3)(i)(C) .................................................................. 7 2.1.4 Stand-alone MPE evaluation limits ........................................................................................... 8 2.2 RF exposure test exemptions for simultaneous transmission sources ........................................... 9 2.2.1 1 mW Test Exemption for simultaneous transmission sources ............................................... 9 2.2.2 Simultaneous transmission SAR based and MPE based test exemptions .............................. 9 2.2.3 Test exemption based on the SAR to Peak Location Separation Ratio ................................. 10 Results of evaluation .............................................................................................................. 11 3.1 Used evaluation methods................................................................................................................. 11 3.2 Evaluation Distance .......................................................................................................................... 11 3.3RFID Emissions (Antenna 1)............................................................................................................. 12 Results ................................................................................................................................... 12 4.1 Conclusion ....................................................................................................................................... 12 Report History ....................................................................................................................... 12 Examiner:Michael DINTERReport Number: F260611E3 Date of Issue: 28.08.2026Order Number: 26-110611Page 4 of 12 Identification 1.1 Applicant Name:Martin Lehmann GmbH & Co. KG Address:Uphauser Weg 82, 32429 Minden Country:Germany Name for contact purposes:- Phone:0571-5046-0 eMail address:[email protected] Applicant represented during the test by the following person: - 1.2 Manufacturer Name:Martin Lehmann GmbH & Co. KG Address:Uphauser Weg 82, 32429 Minden Country:Germany Name for contact purposes:- Phone:0571-5046-0 eMail address:[email protected] Manufacturer represented during the test by the following person: - 1.3 Test Laboratory The tests were carried out by:NMi TESTLAB GmbH Königswinkel 10 32825 Blomberg Germany accredited byDeutsche Akkreditierungsstelle GmbH (DAkkS) according to DIN EN ISO/IEC 17025:2018. The accreditation is only valid for the scope of accreditation listed in the annex of the certificate D-PL-17186-01-00. FCC Test Firm Designation Number DE0004, FCC Test Firm Registration Number 469623, CAB Identifier DE0003 and ISED# 3469A. Examiner:Michael DINTERReport Number: F260611E3 Date of Issue: 28.08.2026Order Number: 26-110611Page 5 of 12 1.4 EUT (Equipment under Test) Test object: * RFID furniture lock Model name: *Verto RFID MIFARE Model number: *L7NF13VX Order number: *- FCC ID: *W2Y-L7NF13VX * Declared by the applicant EUT number 1 Serial number: *2626 – 0585 PCB identifier: *SA036-1 Hardware version: *SA036-11G Software version: *V2.3.0 Type Plate: * …

Text truncated - open the document above for the full version.

Test Report Report Number: F260611E1 Equipment under Test (EUT): RFID furniture lock Verto RFID MIFARE Applicant: Martin Lehmann GmbH & Co. KG Manufacturer: Martin Lehmann GmbH & Co. KG Königswinkel 10 32825 Blomberg, Germany +49 5235 / 9500-0 [email protected] www.nmi-testlab.de Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 2 of 24 References [1] ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+ Errata to C63.10a-2024 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Remark: Errata to C63.10a-2024 is not in the annex of the test laboratory yet [2] FCC CFR 47 Part 15 Radio Frequency Devices [3] RSS-210 Issue 11 (June 2024) Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment [4] RSS-Gen, Issue 5 (2018-04) + Amendment 1 (2019-03) + Amendment 2 (2021-02) General Requirements for Compliance of Radio Apparatus Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 3 of 24 Test Result The requirements of the tests performed as shown in the overview (clause 4) were fulfilled by the equipment under test. The complete test results are presented in the following. “Passedˮ indicates that the equipment under test conforms with the relevant limits of the testing standard without taking any measurement uncertainty into account as stated in clause 1.4 of ANSI C63.10 (2020). However, the measurement uncertainty is calculated and shown in this test report. This test report is only valid in its original form. Any reproduction of its contents in extracts without written permission of the accredited test laboratory NMi TESTLAB GmbH is prohibited. The test results herein refer only to the tested sample. NMi TESTLAB GmbH is not responsible for any generalisations or conclusions drawn from these test results concerning further samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report. Each page necessarily contains the NMi TESTLAB Logo and the TEST REPORT NUMBER. Tested and written by: Signature Reviewed and approved by: Signature Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 4 of 24 Contents:Page Identification ............................................................................................................................................. 5 1.1Applicant ........................................................................................................................................................... 5 1.2Manufacturer .................................................................................................................................................... 5 1.3Test Laboratory ................................................................................................................................................ 5 1.4EUT (Equipment under Test) ........................................................................................................................... 6 1.5Technical Data of Equipment ........................................................................................................................... 7 1.6Dates ................................................................................................................................................................. 7 Operational States .................................................................................................................................... 8 2.1.1Block Diagram (Radiated) ....................................................................................................................... 9 Additional Information .............................................................................................................................. 9 Overview .................................................................................................................................................. 9 Results ..................................................................................................................................................... 10 5.1Test setups ..................................................................................................................................................... 10 5.1.1Radiated: Test fixture ............................................................................................................................ 10 5.1.2Radiated: 9 kHz to 30 MHz .................................................................................................................... 10 5.1.2.1Preliminary measurement 9 kHz to 30 MHz10 5.1.2.2Final measurement 9 kHz to 30 MHz12 5.1.3Radiated: 30 MHz to 1 GHz .................................................................................................................... 13 5.1.3.1Preliminary and final measurement 30 MHz to 1 GHz13 5.1.4Method 99% bandwidth ........................................................................................................................ 14 5.299 % bandwidth ............................................................................................................................................. 16 5.2.1Test setup (99 % bandwidth) ................................................................................................................ 16 5.2.2Test method (99 % bandwidth) ............................................................................................................. 16 5.2.3Test results (99 % bandwidth) .............................................................................................................. 16 5.3Radiated emissions ......................................................................................................................................... 17 5.3.1Test setup (Maximum unwanted emissions) ...................................................…

Text truncated - open the document above for the full version.

Annex A:Test Setup Fotos Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 1 of 5 Test Setup Annex A:Test Setup Fotos Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 2 of 5 Preliminary measurement H-Field 9 kHz to 30 MHz in SAC Annex A:Test Setup Fotos Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 3 of 5 Final measurement H-Field 9 kHz to 30 MHz outdoor Annex A:Test Setup Fotos Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 4 of 5 Final measurement spurious emission 30 MHz to 1000 MHz in SAC Annex A:Test Setup Fotos Examiner:Michael DINTERReport Number: F260611E1 Date of Issue: 28.08.2026Order Number: 26-110611Page 5 of 5 Final measurement spurious emission 30 MHz to 1000 MHz in SAC --- End of Annex A ---