WBV-BR200-WPLAP Router

© 2013 Aerohive Networks Inc. Aerohive ® is a U.S. registered trademark of Aerohive Networks Inc. P/N 330099-01 Rev. A Aerohive QuickStart for the BR200-LTE-VZ Router The Aerohive BR200-LTE-VZ router offers Wi-Fi connectivity with an embedded 3G/4G modem for primary or secondary WAN access through Verizon. The BR200-LTE-VZ router provides LAN and WLAN connectivity and PoE. This router supports a standard 2FF SIM card which your dealer might have pre-installed, or which you can order from Verizon and install yourself. Once the card is installed, contact Verizon to activate your account. After you put your BR200-LTE-VZ router online for the first time, it automatically connects to the Aerohive HiveManager management system. You can then manage your router using HiveManager. For more information about the connection process, see the release notes and other Aerohive product documentation at www.aerohive.com/techdocs. The BR200-LTE-VZ router shipping carton contains the following items: • BR200-LTE-VZ router • AC power adapter and power cord • Ethernet cable • Two external antennas Installing the SIM Card If you need to install a SIM card, follow the steps shown in these illustrations (antennas are not shown). Provisioning the BR200-LTE-VZ Router BR200-LTE-VZ routers can be provisioned in three ways: Pre-provisioned: A network policy is loaded on the router before it is delivered to you. Auto-provisioned: After you power on the router, it establishes a connection to HiveManager, which automatically pushes a configuration and optionally upgrades the HiveOS image on the device. The router then reboots and re- establishes its connection with HiveManager. Manually-provisioned: After the router connects to HiveManager, you or a HiveManager administrator manually uploads a network policy from HiveManager to the router. 12 Installing your Router Follow these steps to install your router: 1 Install the external antennas. 2 Connect the power adapter to the router and plug it into a power outlet. The Status LED stays amber as the router boots up, automatically connects to the Internet, and begins the HiveManager discovery process. The length of time this takes varies depending on how the router has been provisioned: • Pre-provisioned devices require just a few minutes to establish a HiveManager connection. When the router has completed this cycle, the Status LED glows solid white. • Auto-provisioned devices require about 10 minutes to establish a HiveManager connection and receive a network policy. (This might take longer if a software upgrade is involved.) After this process is complete, the Status LED glows solid white. 3 Connect wireless and wired devices to your router. Wired or Wifi Cellular Strength Cellular WAN LEDs (on front panel) SIM card slot Port panel LTE external antennas Status LED Remove the screws and the slot cover. Reinstall the cover plate with the screws. Insert the SIM card with the angled corner positioned as shown. To register, get the latest product documentation (including some translated documents), see compliance information, and download software updates, visit www.aerohive.com/support. BR200-LTE-VZ Ports and Connectors The following illustration shows the rear panel ports, connectors, and port LEDs. For information about these components, see the Aerohive Hardware Reference Guide. BR200-LTE-VZ LEDs This illustration shows the location of the Status, Wi-Fi and cellular status LEDs. The table below lists the light and color status indications for these LEDs. Status LEDDark: The device does not have power. Amber: The device is booting or performing a software upgrade. Do not power off the device during this process. White (steady): The device is connected and operating properly. White (flashing): The device is operating in a failover state using the backup WAN interface. Wired or WiFi LEDDark: There is no WAN connection. Blue: The Wi-Fi connection is up. Green: The Ethernet connection is up. Cellular LEDDark: There is no cellular connection. Blue: The router has a WAN link to the Verizon network and is operating at 4G speeds. Green: The router has a WAN link to the Verizon network and is operating at 3G speeds. Cellular Strength LEDWhite: The RSSI (received signal strength indicator) is -82 dBm or higher. Amber: The RSSI is lower than -82 dBm. Wi ed o Wi i Ce lu a St eng h Cel ula WAN Wi-Fi and cellular LEDs Status LED Link status LEDs Security slot USB port Reset button WAN port Power connector 48V ( .25A) ETH1/PoE ETH2/PoE ETH3 ETH4 WAN/ETH0 Console USB Reset 10/100/1000 Base-T Console port PoE status LEDs LAN ports LTE (Main) LTE (Aux) Main antenna connector Aux antenna connector

You are here: My Book > BR200-WP and BR200 Routers HiveManager 6.1r5 Enterprise Mode Help System. BR200-LTE-VZ Routers Compliance Information: For compliance information for these devices, see http://www.aerohive.com/support/tech-docs-and-online-training. For the FCC Interference Statement, see below. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which an be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced ratio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23 cm between the radiator & your body. Page 1 of 7BR200-WP and BR200 Routers 5/14/2014file:///C:/Users/dknodel/AppData/Local/Temp/MC_.htm Preliminary Draft Aerohive BR200-LTE-VZ routers allow enterprises to provision branch office networks and teleworkers quickly and easily. The BR200-LTE-VZ router provides LAN and WLAN connectivity and PoE (power over Ethernet) support. The BR200-LTE-VZ router has a single dual band 2.4/5 GHz (802.11b/g/n) radio, an embedded LTE modem for use with the Verizon 4G LTE network, two external embedded antennas with diversity, one WAN port (ETH0), four LAN ports (ETH1 through ETH4), a Console port, and an LTE USB port for WAN connection redundancy. BR200-LTE-VZ routers support up to 16 SSIDs, 16 VLANs, 16 networks, and 64 user profiles across both wired and wireless interfaces. • For more information about Aerohive routers in general, see "Introduction to Aerohive Routers" • For more information about how to configure your router, see "Routing Configuration". Installing Aerohive BR200-LTE-VZ Routers You can install the BR200-LTE-VZ router on a desktop or mount it on a wall using the wall mount keyholes on the bottom of the device. To mount the device on a wall, first install two drywall screws 5.875" (14.92 cm) apart in the wall. The heads of the screws must not be wider than 0.25" (0.64 cm) so that they will fit inside the openings in the keyholes. Place the wide section of keyholes over the screws and press the device down to secure it to the wall. Hardware Components You can see the hardware components for theBR200-LTE-VZrouter in the following illustration, and read about them in the descriptions that follow. To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 9.05" (23 cm) from your body. Graphic still under construction Component Descriptions •Radios: One 3x3:3 2.4/5 GHz radio (802.11b/g/n) One 2x2 MIMO LTE radio with global fallback to CDMA/HSPA+/UMTS •Antennas: Page 2 of 7BR200-WP and BR200 Routers 5/14/2014file:///C:/Users/dknodel/AppData/Local/Temp/MC_.htm Preliminary Draft Three internal wi-fi antennas with diversity Two external, detachable LTE antennas (the secondary antenna also functions as a GPS antenna) •Device status LED: The device status LED is located on the triangular wedge on the top of the device. This LED conveys operational states for system power, firmware upgrades, connectivity with HiveManager, and WAN failover states. •Link status LED: There is a link status LED at the top left corner of the WAN port and of each LAN port. See "Status LEDs". •PoE status LED: BR200-LTE-VZ routers have a PoE status LED at the top right corner of the ETH1/PoE and ETH2/PoE ports. See "Status LEDs". •3G/4G signal strength LEDs: There are three LEDs on the front edge •Power connector: The AC power inlet allows you to connect the router to a 100 – 240-volt AC power source using the DC 48V (1.25A, 60W) power supply and power cord that ship with the product. Because the router does not have an on/off switch, it automatically powers on when you connect it to a power source. •WAN port (ETH0): The 10/100/1000-Mbps Ethernet WAN port acts as a WAN interface, is compatible with 10/100/1000Base-T/TX, and automatically negotiates half-and full-duplex connections with the connecting device. This port is auto-sensing and adjusts to straight- through and crossover Ethernet cables automatically. Use the yellow Ethernet cable that ships with the device to connect your router from the WAN port to a cable or DSL modem or other Internet device. •LAN ports (ETH1 through ETH4): The four 10/100/1000-Mbps RJ45 Ethernet ports act as LAN interfaces, are compatible with 10/100/1000Base-T/TX, and automatically negotiate h…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Date: 2014/5/12 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Aerohive Networks Inc. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Name: AP Router Brand Name: Aerohive Model No.: BR200-LTE-VZ We affirm that between SIEMIC and Aerohive Networks, Inc, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature: Client’s name / title: Ergene Serdar/Director Hardware Engineering Contact information / address: 408-510-6159 / [email protected]

Declaration for no non-US channel operation April 23, 2014 We, Aerohive Networks, Inc.declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: WBV-BR200-WPL If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Ergene Serdar/Director Hardware Engineering Tel: 408-510-6159 Fax: 408-510-6199 E-mail: [email protected]

Date: 2013-06-17 FCC ID: WBV-BR200WPL To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, __________________________________ Ergene Serdar/Director Hardware Engineering 330 Gibraltar Drive, Sunnyvale, California 94089 Tel: 408-510-6159 Fax: 408-510-6199 E-mail: [email protected]

Date: 2013-06-17 FCC ID: WBV-BR200WPL AUTHORIZATION LETTER To whom it may concern, We, the undersigned Aerohive Networks, Inc., hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part15C/E and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ Ergene Serdar/Director Hardware Engineering 330 Gibraltar Drive, Sunnyvale, California 94089 Tel: 408-510-6159 Fax: 408-510-6199 E-mail: [email protected]

Attestation for FCC Declaration of Conformity Date: 2014-05-12 FCC ID: WBV-BR200WPL We, Aerohive Networks, INC, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Thank you for your attention. Sincerely yours, Ergene Serdar/Director Hardware Engineering Aerohive Networks, INC Tel: 408-510-6159 Fax: 408-510-6199 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Models Name/Part Name/ Artwork Number/ Artwork Rev./ Unit:mm SPEC LABEL 05 PANTONE BLACK Diecut display only Designed/Date/ 03 May ‘13Camille Liu 3264169000 BR200-WP-LTE-R DELTA NETWORKS, INC. THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA NETWORKS. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION . Graphic Layout Scale/ 1:1 Colors Printed/ Dimensions/ WIDTH HEIGHT 39.7mm x 79.7mm Patents P ending See manual before use. Made in China 510067-05 IC: 7774A-BR200-WPL FCC ID: WBV-BR200-WPL S/N: MAC: AH-BR200-LTE-VZ-N-FCC AH-BR200-LTE-VZ-N-W Input: 48Vdc 1. 25A _ _ _ ____ Contains IC: 3229B-E362 Contains FCC ID: PKRNVWE362 IMEI: Model: BR200-LTE-VZ Patents P ending See manual before use. Made in China 510067-05 IC: 7774A-BR200-WPL FCC ID: WBV-BR200-WPL S/N: MAC: AH-BR200-LTE-VZ-N-FCC AH-BR200-LTE-VZ-N-W Input: 48Vdc 1. 25A _ _ _ ____ IC: 3229B-E362FCC ID: PKRNVWE362 IMEI: Model:BR200-LTE- VZ

Label Location

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17

Report No.: SA130529C21 1 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 RF EXPOSURE REPORT REPORT NO.: SA130529C21 MODEL NO.: BR200-LTE-VZ FCC ID: WBV-BR200-WPL RECEIVED: May 20, 2013 TESTED: May 20, 2013 ~ Mar. 12, 2014 ISSUED: Mar. 20, 2014 APPLICANT: Aerohive Networks, INC ADDRESS: 330 Gibraltar Drive, Sunnyvale, CA 94089 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA130529C21 2 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA130529C21 3 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130529C21 Original release. Mar. 20, 2014 Report No.: SA130529C21 4 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 1. CERTIFICATION PRODUCT: AP Router MODEL: BR200-LTE-VZ BRAND: Aerohive APPLICANT: Aerohive Networks, INC TESTED: May 20, 2013 ~ Mar. 12, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: BR200-LTE-VZ) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Mar. 20, 2014 Suntee Liu / Specialist APPROVED BY : , DATE : Mar. 20, 2014 Ken Liu / Senior Manager Report No.: SA130529C21 5 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 23cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130529C21 6 of 7 Report Format Version 5.0.0 Reference No.: 130514C26 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER MODE MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) WLAN 2.4GHz 802.11b 21.30 2.94 23 0.040 1 802.11g 24.70 2.94 23 0.087 1 802.11n (20MHz) 27.99 8.76 23 0.712 1 WLAN 5GHz Band 1 802.11a 15.10 5.99 23 0.019 1 802.11n (20MHz) 11.24 11.20 23 0.026 1 802.11n (40MHz) 14.00 11.20 23 0.050 1 WLAN 5GHz Band 4 802.11a 22.60 6.16 23 0.113 1 802.11n (20MHz) 26.15 10.85 23 0.754 1 802.11n (40MHz) 23.07 10.85 23 0.371 1 Note: WLAN 2.4GHz 802.11n Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ] = 8.76dBi WLAN 5GHz Band 1 802.11n Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ] = 11.20dBi WLAN 5GHz Band 4 802.11n Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ] = 10.85dBi FREQUENCY BAND ERP (dBm)EIRP (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) WCDMA 826.4MHz~846.6MHz 25.28 27.43 23 0.083 0.551 CDMA 824.7MHz~848.31MHz 26.04 28.19 23 0.099 0.550 LTE 782MHz 26.45 28.60 23 0.109 0.521 FREQUENCY BAND EIRP (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) WCDMA 1852.4~1907.6MHz 26.97 23…

Text truncated - open the document above for the full version.

Report No.: RF130529C21 1 of 89 Report Format Version 5.2.0 Reference No.: 130514C26 FCC TEST REPORT (15.247) REPORT NO.: RF130529C21 MODEL NO.: BR200-LTE-VZ FCC ID: WBV-BR200-WPL RECEIVED: May 20, 2013 TESTED: May 20, 2013 ~ Mar. 07, 2014 ISSUED: Mar. 20, 2014 APPLICANT: Aerohive Networks, INC ADDRESS: 330 Gibraltar Drive, Sunnyvale, CA 94089 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130529C21 2 of 89 Report Format Version 5.2.0 Reference No.: 130514C26 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 5 1. CERTIFICATION .......................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 8 3.2 DESCRIPTION OF TEST MODES ............................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................ 11 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................. 15 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................... 17 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 18 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 19 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................ 20 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 20 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 20 4.1.2 TEST INSTRUMENTS ............................................................................................... 21 4.1.3 TEST PROCEDURES ............................................................................................... 22 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 22 4.1.5 TEST SETUP ............................................................................................................. 23 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 24 4.1.7 TEST RESULTS ........................................................................................................ 25 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 35 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 35 4.2.2 TEST INSTRUMENTS ............................................................................................... 35 4.2.3 TEST PROCEDURES ............................................................................................... 36 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 36 4.2.5 TEST SETUP ............................................................................................................. 36 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 36 4.2.7 TEST RESULTS ........................................................................................................ 37 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 39 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 39 4.3.2 TEST SETUP ............................................................................................................. 39 4.3.3 TEST INSTRUMENTS ............................................................................................... 39 4.3.4 TEST PROCEDURE .................................................................................................. 39 4.3.5 DEVIATION FROM TEST STANDARD....................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (Part 15) 3 RADIATED EMISSION TEST (Part 22, Part 24, Part 27)