WCGP2T3PWireless Monitoring Device

Packet Power, LLC  Phone 1(877)560-8770  Fax 1(866)324-2511  www.packetpower.com August 9, 2011 Attention: Application Examiner Re: Request for confidentiality Applicant: Packet Power, LLC IC: 8751A-P2T3P To whom it may concern, Request is hereby submitted by Packet Power, LLC to withhold permanently from public review certain portions of this application for equipment certification. This request for confidentiality is made pursuant to the Canadian Access to Information Act. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block diagrams  Detailed Operational/Functional Description  User manual – the product requires professional installation and cannot be serviced by the end consumer. Rationale for request for confidentiality: Packet Power, LLC, has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Sincerely, Steve VanTassel CEO

Packet Power, LLC  Phone 1(877)560-8770  Fax 1(866)324-2511  www.packetpower.com July 7, 2011 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement We, Packet Power LLC, hereby authorized Intertek Testing Services to act as our agent for the purpose of preparing application for FCC ID number WCGP2T3P under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is July 7, 2011. The limited agency agreement expires on December 31, 2011, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Steve VanTassel CEO

Packet Power, LLC  Phone & Fax: +1(877)560-8770  www.packetpower.com Modular Approval Checklist Modular approval requirement Yes No (a) The radio elements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. No See Note 1 (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over- modulation. Yes (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Yes (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. Yes (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. Yes (f) The module shall comply with the Category I equipment labeling requirements. Yes g) The module shall comply with applicable RSS-102 exposure requirements, which are based on the intended use/configurations. Yes (h) Is the modular device for an Industry Canada licensed exempt service? Yes Note 1 : The PMM, including all radio components, is permanently enclosed in a highly impact resistant Lexan enclosure. Modules are sold for installation into a specific class of devices known as Power Distribution Units ("PDUs"), which are industrial-grade metal multi-outlet “power strips”. All PDU-type devices have to be completely grounded for safety reasons. The module is always installed in devices with grounded metal enclosures, with a metal front plate with only the antenna (permanently enclosed in Lexan) protruding through the plane of the front plate. All radio components of the PMM are contained within

P2T3 Power Monitoring Module FCC modular Certification - Supporting Documentation Module photos Figure 1. Top view, sealed enclosure Figure 2. Bottom view, sealed enclosure. www.packetpower.com

Power Monitoring Node Model P2T3P -240V FCC ID: WCGP2T3P Packet Power P2T3P www.packetpower.com Made in USA INPUT: 120/208V AC 3 Phase Delta, 50-60Hz, 250mA CONFORMS TO ULSI/EN/IEC STD 61010 - 1 CERTIFIED TO CAN/CSA STD C22.2 NO. 61010 - 1 IC:8751A - P2T3P C 1 RECOGNIZED COMPONENT ATTENTION: SEE PRODUCT MANUAL For indoor use only in dry locations 3~ Packet Power Proprietary & Confidential - All Rights Reserved – Copyright © 2011 Packet Power Proprietary & Confidential - All Rights Reserved – Copyright © 2011 Power Monitoring Module – Supplemental Information Produc t labe l

EMC Report No: 100426626MIN-001R FCC ID: WCGP2T3P IC ID: 8751A-P2T3P Page 33 of 43 3.7 RF Exposure Compliance The maximum measured power, P is -6.0dBm The antenna gain, G is 0.5dBi The maximum EIRP power = P + G EIRP = -6.0 + 0.5 = -5.5dBm, or 0.00028W The limits for Maximum Permissible Exposure (MPE) for transmitter operating at 2.4Hz, MPE is 1mW/cm 2 , or 10W/m 2 S = 10W/m 2 The Power Density is related to EIRP with the equation: S = EIRP / 4πD 2 , or 10 = 0.00028 / 4πD 2 , The minimum safe separation distance, D = 0.15cm, which is below 20cm

TEST REPORT Report Number: 100426626MIN-001R Project Number: G100426626 Testing performed on the P2T3P-120V FCC ID: WCGP2T3P Industry Canada ID: 8751A-P2T3P to 47 CFR Part 15. 247:2009 RSS- 210, Issue 8, 2010 For Packet Power LLC. Test Performed by: Test Authorized by: Intertek Testing Services NA, Inc. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 USA Packet Power LLC 233 Park Ave, Suite 303 Minneapolis, MN 55415, USA Prepared by: Date: September13, 2011 Uri Spector Reviewed by: Date: September13, 2011 Simon Khazon This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report No: 100426626MIN-001R FCC ID: WCGP2T3P IC ID: 8751A-P2T3P Page 2 of 43 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION..........................................................................................................3 1.1 Product Description; Test Facility......................................................................................4 1.3 Environmental conditions ..................................................................................................5 1.4 Measurement uncertainty..................................................................................................6 1.5 Field Strength Calculation .................................................................................................6 2.0 TEST SUMMARY..........................................................................................................................7 3.0 TEST CONDITIONS AND RESULTS........................................................................................8 3.1 Maximum peak output power ............................................................................................8 3.2 Hopping channel carrier frequencies separation.............................................................10 3.3 20dB bandwidth of the hopping channel .........................................................................12 3.4 Number of hopping frequencies ......................................................................................16 3.5 Average time of occupancy of hopping frequency ..........................................................18 3.6 Radiated spurious emissions ..........................................................................................21 3.7 RF Exposure Compliance ...............................................................................................33 3.8 Transmitter power line conducted emissions ..................................................................34 3.9 Receiver/digital device radiated emissions .....................................................................37 3.10 Digital device conducted emissions ................................................................................40 4.0 TEST EQUIPMENT.....................................................................................................................43 EMC Report No: 100426626MIN-001R FCC ID: WCGP2T3P IC ID: 8751A-P2T3P Page 3 of 43 1.0 GENERAL DESCRIPTION Model: P2T3P-120V Type of EUT: Power Monitoring Node Serial Number: N/A FCC ID: WCGP2T3P Industry Canada ID: 8751A-P2T3P Related Submittal(s) Grants: None Company: Packet Power LLC. Customer: Mr. Steve VanTassel Address: 233 Park Ave, Suite 303 Minneapolis, MN 55415, USA Phone: (612) 396-8704 e-mail: [email protected] Test Standards: 47 CFR, Part 15:2009, §15.247 RSS–210, Issue 8, 2010 RSS-Gen, Issue 3, 2010 47 CFR, Part 15:2009, §15.107 and §15.109, Class B ICES-003, Issue 4:2004 Other Type of radio: Stand -alone Module Hybrid Date Sample Submitted: June 20, 2011 Test Work Started: June 21, 2011 Test Work Completed: June 24, 2011 Test Sample Conditions: Damaged Poor (Usable) Good EMC Report No: 100426626MIN-001R FCC ID: WCGP2T3P IC ID: 8751A-P2T3P Page 4 of 43 1.1 Product Description; Test Facility Product Description: Transmitter Power Monitoring Node Transmitter Type: FHSS Digital Modulation WiFi Blue Tooth Operating Frequency Range(s): From 902 to 928MHz Number of Channels: 64 Modulation: GFSK Emission Designator: 207KF1DBF Antenna(s) Info: Type: Wire soldered to the PCB board Gain: 0.5 dBi Power settings: Level 2 (+6dBm) Antenna Installation: User Professional Factory Transmitter power configuration: Internal battery External power source 120VAC 230VAC 400VAC VDC Other: Amp. 50Hz 60Hz Special Test Arrangement: Test Facility Accreditation: A2LA (Certificate No. 1427.01) Test Methodology: Measurements performed according to the procedures in ANSI C63.10- 2009 and FCC Public Notice DA 00-705 EMC Report No: 100426626MIN-001R FCC ID: WCGP2T3P IC ID: 8751A-P2T3P Page 5 of 43 1.2 EUT Configuration The equipment under test was operated during the measurement under the following conditions: - Standby - Continuous transmissions with hopping function enabled - Continuous transmissions with hopping function disabled (modulated signal) - Continuous transmissions with hopping function disabled (un-modulated signal) - Continuous receiving - Test program (customer specific) - Operating modes…

Text truncated - open the document above for the full version.

Test Setup Photos