WIYQP3000SQPROX

1 Deiscription of QP3000S Reader: Power There are several ways to supply power to a QProx reader
By external DC adapter supplying12V/1A through DB9 RS232 connector.
By USB port supplying 5V/500mA. Packing List QPROX *1 ADAPTER*1(Optional) USB/RS232 CABLE (Choose one of the cables prior to ordering) 2 Installation 2.1 QP3000S SAM Card Installation Procedures Step1. Unscrew SAM card cover screws Step2. Push SAM card cover upward Step3. Remove SAM card cover Step4. Insert SAM cards into SAM slots Step5. Reinstall SAM card cover and screws back 1 LCD Display 2 LED (Blue) 3 LED (Orange) 4 LED (Green) 5 LED (Red) 6 Landing Zone 7 SAM Card Cover 2.2 Reader Stand Installation Step1. Align and insert a reader stand to the fixture holes at the back of a reader Step2. Push the reader stand upward until hearing a click sound 2.3 Installation Notice Do not place the reader on a metallic surface to avoid interferences 3 LED Indicator There are 4 LED indicators on a QProx. From left to right are blue, orange, green and red color LEDs Status Description of LED Indicators The states of the LED indicators are described below:  After QProx is initialized and ready for transaction, the blue LED will light up. The blue LED indicates the reader is ready for contactless card transactions  The blue and yellow LED indicate that a card has been detected and the transaction process is started.  The blue, yellow and green LED indicate a SUCCESSFUL transaction.  The red LED indicates transaction FAILURE or malfunction. 4 Contactless Card Landing Zone The Land Zone icon is printed on the center of working area, which indicates the correct location to detect user's card. 警語 依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻 電機 ，非經許可，公司 、商號或使用者均不得擅自變更頻率、加大功率或變更原 設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾 合法通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電 機設備之干擾。 Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Date: Nov. 20, 2012 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: WIYQP3000S To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: Block Diagrams Schematics Operational Descriptions The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Eddie Lin / Vice President _____________________________ (Signature)

AGENCY AUTHORIZATION LETTER To whom it may concern: We, the undersigned CASTLES TECHNOLOGY CO., LTD. , hereby authorize Max Light Technology Co. Ltd. (MLT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by MLT on our behalf shall have the same effects as acts of our own. For questions regarding the authorization, please contact us. Thank you! Sincerely yours, _____________________________________ (Signature) Original written signature of authorized signer: Eddie Lin / Vice Prisdent Printed name of authorized signer / Title Date: Nov. 20, 2012

Report Number: MLT1210P15005 Photograph of EUT RS232 RS232 Report Number: MLT1210P15005 USB USB

Report Number: MLT1210P15005 Label Format: Label Position: Equipment Label 5cmX2.5cm This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received , including Interference that may cause undesired operation. Trade Name: CASTLES TECHNOLOGY Model No. : QP3000S FCC ID: WIYQP3000S Rear View

Report Number: MLT1210P15005 Report Number: MLT1210P15005 Report Number: MLT1210P15005 Report Number: MLT1210P15005

Page: 1 / 33 Report Number: MLT1210P15005 (FCC : Part 15 Subpart C 15.225 / ANSI C63.4-2003) Product :QPROX Trade Name :CASTLES TECHNOLOGY Model No. :QP3000S Applicant :CASTLES TECHNOLOGY CO., LTD Applicant Address :2F, No.205, Sec.3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan (R.O.C.) Page: 2 / 33 Report Number: MLT1210P15005 Report Number MLT1210P15005 Applicant CASTLES TECHNOLOGY CO., LTD Product QPROX Sample Received Date 2012/10/29 Sample Tested Date 2012/10/29 ～ 2012/11/16 Report Prepared By Jesse Tien Signature Date Prepared 2012/11/19 Report Authorized By Roger Chen Signature Date Authorized 2012/11/19 Test By Max Light Technology Co., Ltd. Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan., R.O.C. Office : Tel: 886-2-2363-2447 Fax: 886-2-2363-2597 Lab. : Tel: 886-2-2663-3486 Fax: 886-2-2663-3582 It may be duplicated completely for legal use with the allowance of the applicant. It shall not be reproduced except in full, without the written approval of our laboratory. Page: 3 / 33 Report Number: MLT1210P15005 Table of Contents : HISTORY OF TEST REPORT ................................................................................................. 4 1. GENERAL............................................................................................................................ 6 2. CONDUCTED EMISSIONS REQUIREMENTS ................................................................. 12 3. RADIATED EMISSIONS REQUIREMENTS...................................................................... 18 4. FREQUENCY TOLERANCE REQUIREMENTS................................................................ 26 5. TRANSMITTER BANDWIDTH MEASUREMENTS............................................................ 28 APPENDIX I - EUT TEST SETUP ......................................................................................... 31 APPENDIX II - BRAND / TRADE NAME & MODEL NO. MULTIPLE LISTEE ....................... 33 Page: 4 / 33 Report Number: MLT1210P15005 History of Test Report Original Report Issue Date: Nov. 19, 2012 ■ No additional attachment □ additional attachments were issued as in the following record: Attachment No. Issue Date Description MLT1210P15005 Nov. 19, 2012Original report Page: 5 / 33 Report Number: MLT1210P15005 CERTIFICATION We here by verify that : The test data, data evaluation, test procedures and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4-2003. All test were conducted by MLT(Max Light Technology Co., Ltd) Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan, R.O.C Also, we attest to the accuracy of each. We further submit that the energy emitted by the sample EUT tested as described in the report is in compliance with Class B radiated and conducted emission limit of FCC Rules Part 15 Subpart C (15.225). Applicant Name CASTLES TECHNOLOGY CO., LTD Applicant Address 2F, No.205, Sec.3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan (R.O.C.) Manufacturer Name CASTLES TECHNOLOGY CO., LTD Manufacturer Address 2F, No.205, Sec.3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan (R.O.C.) Equipment QPROX Model No QP3000S FCC ID WIYQP3000S Report Prepared By Jesse Tien Signature Report Authorized By Roger Chen Signature Page: 6 / 33 Report Number: MLT1210P15005 1. General 1.1 Introduction The following measurement report is submitted on behalf of CASTLES TECHNOLOGY CO., LTD In support of a Class B Digital Device certification in accordance with Part2 Subpart J and Part 15 Subpart C of the Commission’s and Regulations. 1.2 Customer Details Applicant Name CASTLES TECHNOLOGY CO., LTD Applicant Address 2F, No.205, Sec.3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan (R.O.C.) Manufacturer Name CASTLES TECHNOLOGY CO., LTD Manufacturer Address 2F, No.205, Sec.3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan (R.O.C.) 1.3 Technical data of EUT Equipment QPROX Model No QP3000S FCC ID WIYQP3000S Power Type 1. USB mode: Powered by PC 2. RS232 mode: Powered By AC adapter Model : PA1015-2T2 Input : AC100-240V , 50/60Hz , 0.4A Output : DC12V , 1A , 12W Type of Modulation Pulse code Type of Antenna Loop antenna Frequency of Channel 1 Channel, 13.56MHz Note: During testing the EUT was operated at Tx or Rx mode for each emission measured. This was done in order to ensure that maximum emission levels were attained. Page: 7 / 33 Report Number: MLT1210P15005 1.4 Summary Of Tests Description of Standards and Results Emission Test Item Standard Result Conducted Emission Requirements Part 15 15.207 PASS Radiated Emission Requirements Part 15 15.225(a)(b)(c)(d) Part 15 15.205 , 15.209 PASS Frequency Tolerance Requirements Part 15 15.225(e) PASS Bandwidth Emission Requirements Part 15 15.215 PASS 47 CFR Part 15 Subpart C (1.705MHz to 30MHz Emission Limit) Frequency (MHz) Field Strength (30m) (uV/30m) Field Strength (3m) (dBuV/m) 1.705 to 13.110 30 69.5 13.110 to 13.410 106 80.5 13.410 to 13.553 334 90.5 13.553 to 13.567 15848 124.0 13.567 to 13.710 334 90.5 13.710 to 14.010 106 80.5 14.010 to 30.000 30 69.5 Note : Use quasi-peak meter. Distance Factor Limit (3m) = Limit (30m) + 40log(30/3) 15.209 Radiated Emission Limits: General Requirements Frequency (MHz) Field Strength (uV/ m) dBuV/m Distance (m) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30.0 30 29.5 30 30 - 88 100 40.0 3 88 - 216 150 43.5 3 216 - 960 200 46.0 3 Above 960 500 54.0 3 Page: 8 / 33 Report Number: MLT1210P15005 1.5 Description of Support Equipment In order to construct the minimum system which required by the ANSI C63.4-2003, following equipments were used as the support units. Component Manufacturer Model No. Serial No. FCC ID Monitor IBM 6934-AC1 23-CB387 FCC DOC Computer Dell DCSM 7LDZX1S FCC DOC Keyboard Dell SK-8115 MY-0DJ325-71619-88 5-0166 FCC DOC Mouse Dell MOC5UO HOYO2HZ4 FCC DOC Printer HP C4562B H946151BZ B94C2164X Modem D-Link DFM-560EL ES0O25A000007 FCC D…

Text truncated - open the document above for the full version.

Report Number: MLT1210P15005 Photograph of Conducted Measurement Front View of The Test Configuration (RS232) Rear View of The Test Configuration (RS232) Report Number: MLT1210P15005 Front View of The Test Configuration (USB) Rear View of The Test Configuration (USB) Report Number: MLT1210P15005 Photograph of Radiated Measurement Front View of The Test Configuration (RS232) Rear View of The Test Configuration (RS232) Report Number: MLT1210P15005 Front View of The Test Configuration (USB) Rear View of The Test Configuration (USB) Report Number: MLT1210P15005 Front View of The Test Configuration (RS232) Rear View of The Test Configuration (RS232) Report Number: MLT1210P15005 Front View of The Test Configuration (USB) Rear View of The Test Configuration (USB)