WIYS1P001POS Terminal

S1P POS Terminal Book 2 User Manual S1P Version 1.0 May. 2023 CRT-S1-21-02-V1.0-CE-RCM-CB-FCC-IC-UL CASTLES TECHNOLOGY Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw Castles Technology Co., Ltd. Pg. 2 WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary to their respective owners. Castles Technology Co., Ltd. Pg. 3 Revision History Version Date Descriptions Author 1.0 2023.05.03 Initial creation. Dustin 1.1 2023.07.12 Add FCC/IC/UL Modify temperature from 45 to 50 degrees C Dustin 1.2 2023.07.27 Modify temperature from 50 to 40 degrees C Dustin Castles Technology Co., Ltd. Pg. 4 Contents 1. Introduction .................................................................................................................. 5 2. Hardware Setup ............................................................................................................ 6 2.1. Parts of the Terminal ........................................................................................... 6 2.2. Insert SAM Card .................................................................................................. 8 2.3. Insert GSM SIM Card .......................................................................................... 9 2.4. Insert Micro SD Card ......................................................................................... 10 3. Appendix .................................................................................................................... 11 3.1. CB ..................................................................................................................... 11 3.2. FCC ................................................................................................................... 12 3.3. IC ....................................................................................................................... 13 3.4. UL / IEC 62368-1 ............................................................................................... 14 Castles Technology Co., Ltd. Pg. 5 1. Introduction This document provides a guideline for operating and configuring Castles S1P terminal. The scope of this document includes setting up the terminal, basic operation, application lifecycle, and some advanced features. Regulatory instruction of usage ● Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use. ● Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc. ● Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate. ● Static electricity may occur in some places (such as where you use a carpet). ● Please do not leave it in the sun for a long time. ● Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit. ● Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch. ● This device requires connection to AC power for operation and is for installation in a fixed POS system only(>20cm). Castles Technology Co., Ltd. Pg. 6 2. Hardware Setup 2.1. Parts of the Terminal Front 1. Front camera 2. LCD display 3. Keypad 4. Contactless Card Landing Zone 5. Magnetic Stripe Reader 6. Smart Card Reader 1 2 3 5 4 6 Castles Technology Co., Ltd. Pg. 7 Rear 7. Back cover 8. Speaker 9. Product label 10. port for power cable and transmission cable 11. SAM slots 1-2 12. GSM SIM card slots 1-2 13. Micro SD Card Slot 7 13 8 9 11 12 10 Castles Technology Co., Ltd. Pg. 8 2.2. Insert SAM Card Step 1: Remove the back cover. Step 2: Insert SAM card into the desired slot. Step 3: Reverse the operation of step 1 to install the back cover. Bottom: SAM 1 Upper: SAM 2 Castles Technology Co., Ltd. Pg. 9 2.3. Insert GSM SIM Card Step 1: Remove the back cover. Step 2: Insert SIM card into the desired slot. Step 3: Reverse the operation of step 1 to install the back cover. Bottom: SIM 1 Upper: SIM 2 Castles Technology Co., Ltd. Pg. 10 2.4. Insert Micro SD Card Step 1: Remove the back cover. Step 2: Place the Micro SD memory card. Step 3: Reverse the operation of step 1 to install the back cover. Castles Technology Co., Ltd. Pg. 11 3. Appendix 3.1. CB ⚫ Warning: Power cord shall be connected to a socket-outlet with earthing connection. ⚫ Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations. ⚫ Warning: This product is intended to be supplied by a Listed Power Adapter "L.P.S." (Or "Limited Power Source") and is rated at 12 Vdc, 1 A min., Tma = 40 degrees C. Castles Technology Co., Ltd. Pg. 12 3.2. FCC Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an…

Text truncated - open the document above for the full version.

Date: 2023-09-05 FCC ID: WIYS1P001 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing CASTLES TECHNOLOGY CO., LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing CASTLES TECHNOLOGY CO., LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Evelyn Chen, Project Manager of Product Certification Team CASTLES TECHNOLOGY CO., LTD. Tel: +886-2-8913-1771 Fax: +886-2-8913-1772 E-mail: [email protected]

Date: 2023-08-07 FCC ID: WIYS1P001 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Evelyn Chen/ Project Manager CASTLES TECHNOLOGY CO., LTD. Tel.: +886-2-8913-1771 Fax: +886-2-8913-1772 E-mail: [email protected]

Date:2023-08-20 FCC ID: WIYS1P001 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: CASTLES TECHNOLOGY CO., LTD. hereby authorizes s Emerald Chen / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Emerald Chen / Specialist of BV CPS Taoyuan on CASTLES TECHNOLOGY CO.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Evelyn Chen/ Project Manager CASTLES TECHNOLOGY CO., LTD. Tel.: +886-2-8913-1771 Fax: +886-2-8913-1772 E-mail: [email protected]

Reference No.: BBGM-WTW-P23070647_EXT Page 1 / 7 CONSTRUCTION PHOTOS OF EUT Reference No.: BBGM-WTW-P23070647_EXT Page 2 / 7 Reference No.: BBGM-WTW-P23070647_EXT Page 3 / 7 Reference No.: BBGM-WTW-P23070647_EXT Page 4 / 7 Reference No.: BBGM-WTW-P23070647_EXT Page 5 / 7 Reference No.: BBGM-WTW-P23070647_EXT Page 6 / 7 Reference No.: BBGM-WTW-P23070647_EXT Page 7 / 7

FCC ID: WIYS1P001 IC: 27350-S1P001 ↓The back of the EUT The label will be permanently affixed and readily visible. Bottom of EUT Label location

Reference No.: BBGM-WTW-P23070647_INT Page 1 / 15 CONSTRUCTION PHOTOS OF EUT Reference No.: BBGM-WTW-P23070647_INT Page 2 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 3 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 4 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 5 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 6 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 7 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 8 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 9 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 10 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 11 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 12 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 13 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 14 / 15 Reference No.: BBGM-WTW-P23070647_INT Page 15 / 15

Report No.: MFBBGM-WTW-P23070647 Page No. 1 / 7 Report Format Version: 6.1.1 FCC RF Exposure Report Report No.: MFBBGM-WTW-P23070647 FCC ID: WIYS1P001 Test Model: S1P Received Date: 2023/7/26 Date of Evaluation: 2023/9/21 Issued Date: 2023/9/22 Applicant: CASTLES TECHNOLOGY CO., LTD. Address: 6F, NO. 207-5, SEC. 3, BEIXIN RD., XINDIAN DISTRICT, NEW TAIPEI CITY 23143, TAIWAN (R. O. C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBBGM-WTW-P23070647 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: MFBBGM-WTW-P23070647 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBBGM-WTW-P23070647 Original Release 2023/9/22 Report No.: MFBBGM-WTW-P23070647 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: POS Terminal Brand: Test Model: S1P Sample Status: Identical Prototype Applicant: CASTLES TECHNOLOGY CO., LTD. Date of Evaluation: 2023/9/21 FCC Rule Part: FCC Part 2 (Section 2.1091) Standards: KDB 447498 D01 General RF Exposure Guidance v06 We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, declare that the equipment above has been found compliance with the requirement limits of applicable standards. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. Prepared by : , Date: 2023/9/22 Gina Liu / Specialist Approved by : , Date: 2023/9/22 Jeremy Lin / Project Engineer Report No.: MFBBGM-WTW-P23070647 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: MFBBGM-WTW-P23070647 Page No. 6 / 7 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power EUT contains certified module (FCC ID: WIYSLM500QA) Mode Tune-up Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2.4GHz 18.0 0.75 20 0.015 1.00 WLAN 5.18 ~ 5.24GHz 14.0 2.69 20 0.009 1.00 WLAN 5.745 ~ 5.825GHz 14.5 2.69 20 0.010 1.00 Bluetooth 11.5 0.75 20 0.003 1.00 Mode Tune-up Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) GSM850 31.5 -1.18 20 0.214 0.550 PCS1900 28 1.25 20 0.167 1.00…

Text truncated - open the document above for the full version.

Report No.: RFBBGM-WTW-P23070647-4 Page No. 1 / 33 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBBGM-WTW-P23070647-4 FCC ID: WIYS1P001 Test Model: S1P Received Date: Jul. 26, 2023 Test Date: Aug. 15 ~ Aug. 18, 2023 Issued Date: Sep. 11, 2023 Applicant: CASTLES TECHNOLOGY CO., LTD. Address: 6F, NO. 207-5, SEC. 3, BEIXIN RD., XINDIAN DISTRICT, NEW TAIPEI CITY 23143, TAIWAN (R. O. C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBBGM-WTW-P23070647-4 Page No. 2 / 33 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Modification Record .............................................................................................................................. 5 3 General Information ................................................................................................................................... 6 3.1 General Description of EUT .................................................................................................................. 6 3.2 Description of Test Modes..................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 7 3.3 Description of Support Units ................................................................................................................. 9 3.3.1 Configuration of System under Test ........................................................................................... 9 3.4 General Description of Applied Standards and references ................................................................ 10 4 Test Types and Results ............................................................................................................................. 11 4.1 Radiated Emission Measurement ........................................................................................................ 11 4.1.1 Limits of Radiated Emission Measurement ............................................................................... 11 4.1.2 Test Instruments ....................................................................................................................... 12 4.1.3 Test Procedures ........................................................................................................................ 13 4.1.4 Deviation from Test Standard ................................................................................................... 13 4.1.5 Test Set Up ............................................................................................................................... 14 4.1.6 EUT Operating Conditions ........................................................................................................ 14 4.1.7 Test Results .............................................................................................................................. 15 4.2 Conducted Emission Measurement .................................................................................................... 23 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 23 4.2.2 Test Instruments ....................................................................................................................... 23 4.2.3 Test Procedures ............................................................................…

Text truncated - open the document above for the full version.

Reference No.: RFBBGM-WTW-P23070647_TSup 1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: RFBBGM-WTW-P23070647_TSup 2 RADIATED EMISSION TEST BELOW 1GHz (Z-Plane) Reference No.: RFBBGM-WTW-P23070647_TSup 3 Reference No.: RFBBGM-WTW-P23070647_TSup 4 RADIATED EMISSION TEST ABOVE 1GHz (Z-Plane) Reference No.: RFBBGM-WTW-P23070647_TSup 5 Reference No.: RFBBGM-WTW-P23070647_TSup 6 RADIATED EMISSION TEST 30MHz~1GHz (NFC) Reference No.: RFBBGM-WTW-P23070647_TSup 7 RADIATED EMISSION TEST BELOW 30MHz (NFC)