WS2-STM7C24EEWIRELESS MIRRORING ADAPTER

JA 3 • • • • • • AC • • • • • • • 4 • • JA 5 Wireless/ Pass-Thru Wireless Connect Wireless Ready Link 22cm Source HDMIHDD MOVERIO BT-200 MOVERIO BT-200Sink MOVERIO BT-200 2MOVERIO BT-200 HDMI 6 A micro USB micro USBAC B HDMI Output HDMI InputMiracast C HDMI Input micro USBAC HDMIHDMI Wireless/ Pass-Thru Wireless Connect Wireless Ready Link A C B JA 7 A Source/Sink B Wireless/Pass-Thru [Source] MOVERIO BT-200MiracastHDMI Output [Sink] MOVERIO BT-200MiracastHDMI Input C Wireless Connect D Wireless Ready E Link D E 8 MOVERIO BT-200Source HDMI InputHDMI HDMISource HDMI HDMI Output Wireless/ Pass-Thru Wireless Connect Wireless Ready Link JA 9 MOVERIO BT-200HDMI Output Wireless/Pass-Thru 1. Wireless/Pass-Thru HDMI Output 2. MOVERIO BT-200MOVERIO Mirror MOVERIO BT-200 ID HDMI Output MOVERIO BT-200 10 MOVERIO BT-200Sink HDMI OutputHDMI HDMISink Wireless/ Pass-Thru Wireless Connect Wireless Ready Link 1. Wireless/Pass-Thru HDMI Output JA 11 2. MOVERIO BT-200MOVERIO Mirror MOVERIO BT-200 ID HDMI Output HDMI Output 12 MOVERIO BT-200Web 1. Wireless/Pass-ThruWireless Connect 5 HDMI Output IP Wireless ReadyLink 2. WebIP 3. SettingON/OFF Firmware Update http:// moverio.jp Factory Reset JA 13 • micro USB • AC • HDMI InputHDMI Output • HDMI outputHDMI • MOVERIO BT-200SinkSource • HDCPHDCP • 15 Wireless/Pass-Thru • Wireless ReadyLink Wireless Connect Reset • SourceSink • MOVERIO BT-200Wi-Fi • MOVERIO BT-200Wi-Fi Direct Wi-FiWi-Fi Direct • Wi-FiBluetooth 14 micro USB x1 HDMI Input x1 HDMI Output x1 HDMI : 640x480p @60Hz 720x480p @60Hz 720x576p @50Hz 1280x720p @50/60Hz 1920x1080p @24/30Hz Miracast : 640x480p @60Hz 1280x720p @25/30Hz MPEG2 (H.264+AAC) Power (AC adapter) 100 to 240 VAC 10% 50/60Hz Power (EHDMC10) 5 VDC Miracast5W 0.3W • • MOVERIO BT-200MOVERIO Mirror MOVERIO BT-200 JA 15 +5 to +35 20 to 80% -10 to +60 10 to 90% 115 x 115 x 30 mm 130 g IEEE 802.11 b/g/n 2.4 GHz 1 to 14 ch OFDMDS-SS 10 m Miracast ™Wi-Fi Alliance HDMIHDMI LicensingLLC http:// moverio.jp LAN LAN LAN 1-13 1-11 LAN 16 • • 1. 2. JA 17 3. JIS C 61000-3-2 JIS C 61000-3-2 18 Introduction Thank you very much for purchasing this product. Make sure you read this guide before using the product to ensure you use it safely and correctly. Keep this guide in a safe place so that you can access it easily if you have any questions in the future. Safety Instructions This documentation uses graphical symbols to show how to use the product safely and avoid injury to others or damage to property. These symbols and their meanings are shown below. Make sure you understand these symbols before reading this guide. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. Caution This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. Warning Only use the unit at the specified voltage. Check the specifications for the power cable. If you do not use the correct power cable, a fire or electric shock could occur. Do not leave this produc t unattended in locations subjec t to unusually high temperatures such as in a car with the windows closed, in direct sunlight or, next to the exhaust vent of an air-conditioner or heater. The product may be deformed by the high temperatures, the internal workings may be damaged, or a fire could occur. EN 19 Do not place vases, containers containing water, or medical containers on this product. If any liquid spills from the container, a fire or electric shock could occur. Take care when handling the power plug. If it is not handled correctly, a fire or electric shock could occur. Note the following points when handling the plug. • Do not overload wall outlets, extension cables, or power strips. • Do not plug it in if there are any foreign substances, such as dust, attached to the plug. • Make sure the plug is fully plugged in. • Do not plug in or unplug if your hands are wet. • Do not unplug by pulling on the power cable. • Do not use a different power supply (AC adapter). Do not use a damaged power cable. Otherwise, a fire or electric shock could occur. • Do not modify the power cable. • Do not place heavy objects on the power cable. • Do not apply excess force, bend, or twist the power cable. • Do not perform wiring near an electric heater. Do not install or use this product in locations subject to humidity or water such as the outdoors, or near a bath or shower. Otherwise, a fire or electric shock could occur. Do not touch the plug during a thunderstorm. Otherwise, an electric shock could occur. If you notice any of the following abnormalities, turn off the product immediately, unplug the power cable from the electrical outlet, and contact your local dealer or Epson service call center. • If you see smoke coming from the product, or notice abnormal odors or sounds. • If any water or foreign substance enters the product. • If the product was dropped and the case was damaged. If you continue using the product in any of these states, a fire or electric shock could occur. Do not perform repairs yourself. 20 Except as indicated in the "User's Guide", the case for this product should only be opened by qualified service personnel. Do not disassemble or remodel this product or its consumables. Many sections inside the product carry a high electrical charge which could cause a fire or electric shock to occur. Caution When moving the product, make sure you turn off the power, unplug the power cable from the electrical outlet, and disconnect any wiring before moving. Otherwise, a fire or electric shock could occur. Do not install the product in a location subject to humidity or dust such as a kitchen counter or near a humidifier, or in a location subject to smoke or steam. Otherwise, a fire or electric shock could occur. Do not install the product in the following locations. • On a carpet, a bed, a blanket, and so on. • Do not cover it with a blanket, curtain, tablecl…

Text truncated - open the document above for the full version.

82 Introduzione Grazie per aver acquistato questo prodotto. Assicurarsi di leggere questa guida prima di utilizzare il prodotto al fine di garantir- ne un uso sicuro e appropriato. Tenere questa guida in un luogo sicuro in modo da potervi accedere agevolmente in caso di eventuali dubbi in futuro. Istruzioni sulla sicurezza Nella presente documentazione vengono utilizzati simboli grafici che indicano come utilizzare in sicurezza il prodotto e consentono di evitare infortuni o danni alle proprietà. Di seguito vengono riportati questi simboli con i relativi significati. Assicurarsi di comprendere tali simboli prima di leggere la guida. Avvertenza Questo simbolo indica informazioni, che, se ignorate, potrebbero provocare infortuni o il decesso dell'utente a causa di una gestione non corretta. Attenzione Questo simbolo indica informazioni, che, se ignorate, potrebbero provocare infortuni o danni fisici causati da una gestione non corretta. Avvertenza Utilizzare l'unità esclusivamente alla tensione specificata. Verificare le specifiche del cavo di alimentazione. Se non si utilizza il cavo di alimentazione corretto, sussiste il rischio di incendi o scosse elet- triche. N o n l a s c i a re q u e s to p ro d o t to i n c u s to d i to i n l u o g h i s o g g e t t i a te m p e ra t u re insolitamente alte, ad esempio in un'auto con finestrini chiusi, alla luce solare diretta, accanto alla ventola di scarico di un condizionatore d'aria o di un termoconvettore. Le temperature elevate potrebbero deformare il prodotto, danneggiarlo internamente o essere causa di incendi. Non posizionare vasi, recipienti contenenti acqua o contenitori medici su questo prodotto. Se viene versato del liquido dal contenitore, vi è il rischio di incendi o scosse elettriche. IT 83 Prestare attenzione quando si maneggia la spina di alimentazione. Se non viene maneggiata correttamente, vi è il rischio di incendi o scosse elettriche. Tenere presente i seguenti punti quando si maneggia la spina. • Non sovraccaricare le prese a parete, le prolunghe o le ciabatte. • Non collegare se sulla presa sono presenti sostanze estranee, ad esempio polvere. • Assicurarsi che la spina sia interamente collegata. • Non collegare o scollegare con mani umide. • Non scollegare tirando il cavo di alimentazione. • Non utilizzare un alimentatore diverso (adattatore CA). Non utilizzare un cavo di alimentazione danneggiato. In caso contrario, vi è il rischio di incendi o scosse elettriche. • Non manomettere il cavo di alimentazione. • Non posizionare oggetti pesanti sul cavo di alimentazione. • Non applicare forza eccessiva sul cavo di alimentazione, non torcerlo né piegarlo. • Non eseguire il cablaggio accanto a una stufetta elettrica. Non installare o utilizzare questo prodotto in luoghi soggetti a umidità o esposti all'acqua, ad esempio in luoghi all'aperto, oppure in prossimità di bagni o docce. In caso contrario, vi è il rischio di incendi o scosse elettriche. Non toccare la spina durante i temporali. In caso contrario, vi è il rischio di scosse elettriche. Se si ravvisa una qualsiasi delle seguenti anomalie, spegnere immediatamente il prodotto, scollegare il cavo di alimentazione dalla presa elettrica e contattare il rivenditore locale o il centro di assistenza Epson. • Se si nota del fumo fuoriuscire dal prodotto o si percepiscono odori o suoni anomali. • Se acqua o sostanze estranee penetrano all'interno del prodotto. • Se il prodotto è caduto e il telaio risulta danneggiato. Se si continua a utilizzare il prodotto in una delle condizioni elencate, sussiste il rischio di incendi o scosse elettriche. Non eseguire riparazioni autonomamente. 84 Tranne laddove indicato nel "Manuale dell'utente", il telaio di questo prodotto deve essere aperto esclusivamente da personale di assistenza qualificato. Non smontare o manomettere questo prodotto o le relative parti di ricambio. Diverse sezioni all'interno del prodotto sono provviste di carica elettrica elevata con conse- guente rischio di incendi o scosse elettriche. Attenzione Quando si sposta il dispositivo, assicurarsi di spegnere l'alimentazione, scollegare il cavo di alimentazione dalla presa elettrica e scollegare ogni cablaggio prima dello spostamento. In caso contrario, vi è il rischio di incendi o scosse elettriche. Non installare il prodotto in un luogo soggetto a umidità o polvere, quale il bancone di una cucina, nelle vicinanze di un umidificatore, oppure in un ambiente soggetto a fumo o vapori. In caso contrario, vi è il rischio di incendi o scosse elettriche. Non installare il prodotto nei seguenti luoghi. • Su tappeti, letti, lenzuola ecc. • Non coprirlo con lenzuola, tende, tovaglie ecc. Non posizionare il prodotto su una superficie inclinata o instabile. In caso contrario, potrebbe cadere e causare lesioni. Quando si effettua la manutenzione del prodotto, non utilizzare panni umidi o solventi, quali alcool, benzene o diluenti. In caso contrario, vi è il rischio di scosse elettriche o malfunzionamenti. Non sedere su questo prodotto o posizionarvi sopra oggetti pesanti. In caso contrario, vi è il rischio di lesioni. Pr i m a d i e f fe t t u a r e l a m a n u t e n z i o n e d e l p r o d o t t o, a s s i c u r a r s i d i s p e g n e r e l'alimentazione, scollegare il cavo di alimentazione dalla presa elettrica e disconnettere ogni cablaggio. In caso contrario, vi è il rischio di scosse elettriche. IT 85 Per motivi di sicurezza, assicurarsi di scollegare il cavo di alimentazione dalla presa elettrica quando il prodotto non viene utilizzato. Se l'isolamento si è deteriorato, vi è il rischio di incendi. Durante l'uso del prodotto, assicurarsi che sia ad una distanza di almeno 22 cm (8 pollici) dal corpo. AVVERTENZA: Il presente prodotto contiene sostanze chimiche, tra cui il piombo, che lo stato della California ha riconosciuto quale teratogeno e causa di anomalie all'apparato riproduttivo. Lavare le mani dopo l'utilizzo. (Il presente avviso viene fornito conformemente alla Proposition 65…

Text truncated - open the document above for the full version.

Jorjin Technologies Inc. 5F,No.28,Lane141,Sing‐ai Rd.,Neihu District, Taipei City 114, Taiwan Tel: 886‐2‐27953660 ; Fax: 886‐2‐27954006 Date: May 19, 2014 Federal Communications Commission 7435 Oakland Mills Road Columbia MD2046 Subject: Request for Confidentiality FCC ID: WS2‐STM7C24EE To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune‐up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04‐1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot‐term confidentiality request on the following attachments for 180 days after the grant as outlined in Public Notice DA 04‐1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _____________________ Jones Tsai [email protected]

Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 1 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE 1. External Photograph of EUT Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 2 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 3 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE 720510 Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 4 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Specification of Accessory AC Adapter Brand Name EPSON Model Name PSM05F-050 USB Cable Brand Name N/A Model Name N/A Signal Line 0.8 meter, shielded cable without ferrite core Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 5 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 6 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE 720510 AC Adapter

Bottom of the Device Label location

Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 7 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE 3. Internal Photograph of EUT Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 8 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 9 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 10 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 11 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 12 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 13 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 14 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 15 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 16 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 17 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 18 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 19 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 20 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 21 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE Photographs of EUT Report No.: EP441033 Brand Name: EPSON / Model Name: H695A SPORTON INTERNATIONAL INC. Page Number : 22 of 22 TEL : 886-3-327-3456 Report Issued Date : May 13, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE IC : 10462A- STM7C24EE 720510 WLAN Antenna

SPORTON INTERNATIONAL INC. Page Number : 1 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 RF Exposure Evaluation Report APPLICANT : Jorjin Technologies EQUIPMENT : Wireless Mirroring Adapter BRAND NAME : EPSON MODEL NAME : H695A FCC ID : WS2- STM7C24EE STANDARD : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091, and pass the limit. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL INC. Page Number : 2 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 1.2. Applicant ............................................................................................................................................ 4 1.3. Manufacturer ...................................................................................................................................... 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 5.1. Standalone Power Density Calculations............................................................................................ 7 SPORTON INTERNATIONAL INC. Page Number : 3 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA441033 Rev. 01 Initial issue of report May 05, 2014 SPORTON INTERNATIONAL INC. Page Number : 4 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 1. Administration Data 1.1. Testing Laboratory Test Site SPORTON INTERNATIONAL INC. Test Site Location No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL: +886-3-327-3456 FAX: +886-3-328-4978 1.2. Applicant Company Name Jorjin Technologies Address 17F, No.239, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 22161, Taiwan R.O.C. 1.3. Manufacturer Company Name Jorjin Technologies Address 17F, No.239, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 22161, Taiwan R.O.C. SPORTON INTERNATIONAL INC. Page Number : 5 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Wireless Mirroring Adapter Brand Name EPSON Model Name H695A FCC ID WS2- STM7C24EE Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz Mode •802.11b/g/n HT20 Antenna Type Chip Antenna HW Version JDT003-04 SW Version Alpha 6.5 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 3. Maximum RF average output power among production units Band / Frequency (MHz) IEEE 802.11 Average Power (dBm) 11b 11g HT20 2.4GHz Band 21 17 17 SPORTON INTERNATIONAL INC. Page Number : 6 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 4. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 22 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna SPORTON INTERNATIONAL INC. Page Number : 7 of 7 TEL : 886-3-327-3456 Report Issued Date : May 05, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2- STM7C24EE RF Exposure Evaluation Report Report No. : FA441033 5. Radio Frequency Radiation Exposure Evaluation 5.1. Standalone Power Density Calculations Band Frequency (MHz) Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 22cm (mW/cm^2) Limit (mW/cm^2) WLNA2.4GHz Band 2412 2.5 21.0 23.5 0.22 223.87 0.037 1.000 Note: For conservativeness, the lowest uplink frequency and the max power of each band is used to determine the MPE limit of that band Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

FCC Test Report Report No. : FR441033 SPORTON INTERNATIONAL INC. Page No. : 1 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 FCC Test Report Equipment : Wireless Mirroring Adapter Brand Name : EPSON Model No. : H695A FCC ID : WS2- STM7C24EE Standard : 47 CFR FCC Part 15.247 Operating Band : 2400 MHz – 2483.5 MHz FCC Classification : DTS Applicant Manufacturer : Jorjin Technologies 17F, No.239, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 22161, Taiwan R.O.C. The product sample received on Apr. 21, 2014 and completely tested on Apr. 23, 2014. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2009 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Wayne Hsu / Assistant Manager FCC Test Report Report No. : FR441033 SPORTON INTERNATIONAL INC. Page No. : 2 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Accessories And Support Equipment ..................................................................................................... 7 1.3 Testing Applied Standards ..................................................................................................................... 7 1.4 Testing Location Information .................................................................................................................. 7 1.5 Measurement Uncertainty ...................................................................................................................... 8 2 TEST CONFIGURATION OF EUT ........................................................................................................ 9 2.1 The Worst Case Modulation Configuration ............................................................................................ 9 2.2 The Worst Case Power Setting Parameter ............................................................................................ 9 2.3 The Worst Case Measurement Configuration ...................................................................................... 10 2.4 Test Setup Diagram ............................................................................................................................. 11 3 TRANSMITTER TEST RESULT .......................................................................................................... 13 3.1 AC Power-line Conducted Emissions .................................................................................................. 13 3.2 6dB Bandwidth ..................................................................................................................................... 16 3.3 RF Output Power .................................................................................................................................. 18 3.4 Power Spectral Density ........................................................................................................................ 22 3.5 Transmitter Bandedge Emissions ........................................................................................................ 24 3.6 Transmitter Unwanted Emissions.................................................................................…

Text truncated - open the document above for the full version.