WS2-WG1300B0WIFI MODULE

Copyright © JORJIN TECHNOLOGIES INC. 2013 http://WWW.JORJIN.COM.TW CONFIDENTIAL a module solution provider WG1300-B0 Evaluation Module User Guide Revision 0.2 Doc No: WG1300BE00 EM Board-UG-R02 Copyright © JORJIN TECHNOLOGIES INC. 2014 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 1 Index 0. REGULATION INFORMATION .......................................................................... 2 1. INTRODUCTION .................................................................................................... 7 2. WG1300-B0 EM BOARD ........................................................................................ 7 2.1. TOP SIDE ............................................................................................................. 7 2.2. BOTTOM SIDE .................................................................................................. 10 2.3. HARDWARE SETUP ............................................................................................. 12 2.4. SCHEMATICS ....................................................................................................... 13 2.5. BILL OF MATERIAL (BOM) ................................................................................ 14 3. ANTENNA CHARACTERISTICS ...................................................................... 15 3.1. RETURN LOSS & VSWR .................................................................................... 15 3.2. PLANE DEFINITION ............................................................................................. 15 3.3. 3D RADIO PATTERN ............................................................................................ 16 3.4. 2D RADIO PATTERN ............................................................................................ 17 4. LAYOUT GUIDELINES ....................................................................................... 18 4.1. BOARD LAYOUT ................................................................................................. 18 5. APPLICATION DEVELOPMENT ...................................................................... 22 6. HISTORY CHANGE ............................................................................................. 23 Doc No: WG1300BE00 EM Board-UG-R02 Copyright © JORJIN TECHNOLOGIES INC. 2014 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 2 0. REGULATION INFORMATION Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Doc No: WG1300BE00 EM Board-UG-R02 Copyright © JORJIN TECHNOLOGIES INC. 2014 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 3 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) The monopole chip antenna with 2.5 dBi gain was verified in the conformity testing. Radiated transmit power must be equal to or lower than that specified in the Equipment Authorization. A separate approval is required for all other antenna type, or higher gain antenna. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: WS2-WG1300B0”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. …

Text truncated - open the document above for the full version.

Rev. 1/1/03 Jorjin Technologies Inc. 5F,No.28,Lane141,Sing‐ai Rd.,Neihu District, Taipei City 114, Taiwan Tel: 886‐2‐27953660 ; Fax: 886‐2‐27954006 Date: April 24, 2014 Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request regarding application for certification of FCC ID: WS2‐WG1300B0 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request Permanent Confidential treatment of information accompanying this application as outlined below:  Schematics  Block Diagram  Parts List  Operation Description  Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ________________________ Jones Tsai [email protected]

1/1 Jorjin Technologies Inc. 5F,No.28,Lane141,Sing‐ai Rd.,Neihu District, Taipei City 114, Taiwan Tel: 886‐2‐27953660 ; Fax: 886‐2‐27954006 Date: April 24, 2014 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : WS2‐WG1300B0 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test Setup Photos  User Manual The application contains technical information, which the applicant deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Jones Tsai [email protected]

Jorjin Technologies Inc. 5F,No.28,Lane141,Sing‐ai Rd.,Neihu District, Taipei City 114, Taiwan Tel: 886‐2‐27953660 ; Fax: 886‐2‐27954006 Date: April 24, 2014 Request for Modular Approval for FCC ID: WS2-WG1300B0 Item Requirements EUT 1. The modular transmitter must have its own RF shielding. The module is equipped with its own shielding case. 2. The modular transmitter must have buffered modulation / data inputs. The module has buffer modulation / data inputs. 3. The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), The requirements of antenna and spurious emission have been fulfilled. Please refer to the test report and the integrator instruction of this filing. 5. The modular transmitter must be tested in a stand-alone configuration. The module was tested on evaluation board, and it’s not inside of another device during testing 6. The modular transmitter must be labeled with its own FCC ID number. The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The modular transmitter must comply with any applicable RF exposure requirement. With the dedicated antenna (2.5 dBi) the module transmitter complies with the FCC RF exposure requirements for fixed and mobile applications.

Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 1 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510 1. External Photograph of EUT EUT: WG1300-B0 Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 2 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 2. Internal Photograph of EUT 720510 Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 3 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510

Label Location EUT shielding case

Date Code: YYWWSSF YY = Digit of the year, ex: 2010=10 WW = Week (01~53) SS = Serial number from 01 ~99 match to manufacture’s lot number F = Reserve for internal use JORJIN Model:WG1300-B0 FCC ID:WS2-WG1300B0 IC: 10462A-WG1300B0 YYWWSSF 12mm 12mm

Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 4 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510 Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 5 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510 Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 6 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510 Photographs of EUT Report No.: EP3N2754 Brand Name: Jorjin Technologies Inc. / Model Name: WG1300-B0 SPORTON INTERNATIONAL INC. Page Number : 7 of 7 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC : WS2-WG1300B0 IC : 10462A-WG1300B0 720510

SPORTON INTERNATIONAL INC. Page Number : 1 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 RF Exposure Evaluation Report APPLICANT : Jorjin Technologies Inc. EQUIPMENT : WiFi Module BRAND NAME : Jorjin Technologies Inc. MODEL NAME : WG1300-B0 FCC ID : WS2-WG1300B0 STANDARD : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091, and pass the limit. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL INC. Page Number : 2 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 1.2. Applicant ............................................................................................................................................ 4 1.3. Manufacturer ...................................................................................................................................... 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 5.1. Power Density Calculations ............................................................................................................... 7 SPORTON INTERNATIONAL INC. Page Number : 3 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA3N2754 Rev. 01 Initial issue of report May 14, 2014 SPORTON INTERNATIONAL INC. Page Number : 4 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 1. Administration Data 1.1. Testing Laboratory Test Site SPORTON INTERNATIONAL INC. Test Site Location No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL: +886-3-327-3456 FAX: +886-3-328-4978 1.2. Applicant Company Name Jorjin Technologies Inc. Address 17F, No 239, Sec 1, Datong Road, Xizhi District, New Taipei City, Taiwan ROC 1.3. Manufacturer Company Name Jorjin Technologies Inc. Address 17F, No.239, Sec. 1, Datong Rd, Xizhi Dist. New Taipei City 221, Taiwan. R.O.C. SPORTON INTERNATIONAL INC. Page Number : 5 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type WiFi Module Brand Name Jorjin Technologies Inc. Model Name WG1300-B0 FCC ID WS2-WG1300B0 Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz Mode •802.11b/g Antenna Type Chip Antenna EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 3. Maximum RF average output power among production units Mode 2.4GHz Band IEEE 802.11 Average Power (dBm) 11b 17.0 11g 17.0 SPORTON INTERNATIONAL INC. Page Number : 6 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 4. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna SPORTON INTERNATIONAL INC. Page Number : 7 of 7 TEL : 886-3-327-3456 Report Issued Date : May 14, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 RF Exposure Evaluation Report Report No. : FA3N2754 5. Radio Frequency Radiation Exposure Evaluation 5.1. Power Density Calculations Band Frequency (MHz) Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 20cm (mW/cm2) Limit (mW/cm2) 2.4GHz WLAN 802.11b 2412.0 2.5 17.0 19.500 0.089 89.125 0.018 1.000 2.4GHz WLAN 802.11g 2412.0 2.5 17.0 19.500 0.089 89.125 0.018 1.000 Note: For conservativeness, the lowest uplink frequency of each band is used to determine the MPE limit of that band Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

SPORTON INTERNATIONAL INC. Page Number : 1 of 44 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 IC: 10462A-WG1300B0 Report Template No.: BU5-FR15CWL Version 1.0 Report Template No.: BU5- CR210WL Version 1.0 FCC/IC RF Test Report Report No. : FR3N2754 FCC/IC RF Test Report APPLICANT : Jorjin Technologies Inc. EQUIPMENT : WiFi Module BRAND NAME : Jorjin Technologies Inc. MODEL NAME : WG1300-B0 FCC ID : WS2-WG1300B0 IC : 10462A-WG1300B0 STANDARD : FCC Part 15 Subpart C §15.247 IC RSS-210 issue 8 CLASSIFICATION : (DTS) Digital Transmission System The product was received on Nov. 27, 2013 and testing was completed on Mar. 10, 2014. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown to be compliant with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 44 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 IC: 10462A-WG1300B0 Report Template No.: BU5-FR15CWL Version 1.0 Report Template No.: BU5- CR210WL Version 1.0 FCC/IC RF Test Report Report No. : FR3N2754 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Feature of Equipment Under Test ..................................................................................................... 5 1.4 Product Specification of Equipment Under Test ................................................................................ 5 1.5 Modification of EUT ........................................................................................................................... 5 1.6 Testing Site ........................................................................................................................................ 6 1.7 Applied Standards ............................................................................................................................. 6 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Pre-Scanned RF Power ..................................................................................................................... 7 2.3 Test Mode .......................................................................................................................................... 8 2.4 Connection Diagram of Test System ................................................................................................. 9 2.5 Support Unit used in test configuration and system ........................................................................ 10 2.6 EUT Operation Test Setup .............................................................................................................. 10 2.7 Measurement Results Explanation Example ................................................................................... 10 3 TEST RESULT ........................................................................................................................................... 11 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 11 3.2 Output Power Measurement ............................................................................................................ 13 3.3 Power Spectral Density Measurement ............................................................................................ 16 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 18 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 25 3.6 AC Conducted Emission Measurement........................................................................................... 38 3.7 Antenna Requirements .................................................................................................................... 42 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 43 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 44 APPENDIX A. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 3 of 44 TEL : 886-3-327-3456 Report Issued Date : May 19, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 IC: 10462A-WG1300B0 Report Template No.: BU5-FR15CWL Version 1.0 Report Template No.: BU5- CR210WL Version 1.0 FCC/IC RF Test Report Report No. : FR3N2754 REVISION HISTORY REPORT NO. VERSION DESCRIPTION IS…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : A1 of A2 TEL : 886-3-327-3456 Report Issued Date : Apr. 16, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 IC: 10462A-WG1300B0 Report Template No.: BU5-FR15CWL Version 1.0 Report Template No.: BU5- CR210WL2.4G Version 1.0 FCC/IC RF Test Report Report No. : FR3N2754 Appendix A. Setup Photographs <Conducted Emission> SPORTON INTERNATIONAL INC. Page Number : A2 of A2 TEL : 886-3-327-3456 Report Issued Date : Apr. 16, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : WS2-WG1300B0 IC: 10462A-WG1300B0 Report Template No.: BU5-FR15CWL Version 1.0 Report Template No.: BU5- CR210WL2.4G Version 1.0 FCC/IC RF Test Report Report No. : FR3N2754 <Radiated Emission> LF HF