WSGSK-BH-M28Bluetooth Headphone

Stereo Bluetooth Headset SK‐BH‐M28 Thanks for purchasing stereo headband bluetooth headset. Please check the contents of this package to verify the items listed in the Package Contents List below has been included in your package .Be sure and read this User Guide before using the Headset. Product specification Bluetooth V2 .1+EDR , Class II Frequency 2402MHZ‐2480MHZ Talking /Playing time Up to 20hours Standby time Up to 200hours Bluetooth profile Headset, Handfree ,A2DP, AVRCP Battery type Rechargeable,non‐replaceable Lithium ion polyme Power requirement 5V DC, 100‐240V AC adapte Operating storage temperature ‐10‐55°C ,‐20‐60°C Certificate CE, FCC,BQB，RoHS Introduction support A2DP ,which let you enjoy stereo music perfectly . BH‐M28 also allows you to switch functions between play music and calling. When you are listening to music, you can use answering incoming calls and outgoing calls. After ending a call , the headset could continue playing music automatically. BH‐M28 can use in computer supported Bluetooth technology to talk with others through t network communication, such as: Skype, MSN, or Yahoo! Messenger. Schematic of Bluetooth wireless stereo Headset Bluetooth function Bluetooth On: place the button to “Bluetooth mark “Side, LED will turn to blue for 2 seconds , the Bluetooth headset is on. Bluetooth off: place the button to “OFF “mark , LED will turn to red for 2 seconds, the bluetooth headset is off . Pairing mode: when Bluetooth on, short press multifunction button , repeating red/blue flashes. To answer a call: press multifunction key. To end a call : press multifunction key. To reject a call: press multifunction key 2 seconds. Voice dialing: in connecting standby mode , press and hold multifunction key. Redialing: in connecting standby mode , press multifunction key twice quickly. Volume +: press and hold “vol +” two seconds in conversation or music mode, the speaker will sound dudu”, you could hear the maximum volume. Volume ‐: press and hold “vol ‐” two seconds in conversation or music mode , the speaker will sound “dudu”, you could hear the minimum volume. Backward : short press “vol –” when music playing. Forward: short press “Vol +” when music playing. Play/Pause: short press multifunction key when music playing. Bluetooth pairing 1.make sure this item in off state. 2.place the button to “Bluetooth ”mark side , short press multifunction when solid blue flash , repeating red/blue flashes. 3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See the user guide of your phone for instructions; select the BH‐M28 from the list of the found devices. 4. Enter the pass code “0000”and connect the headset to your phone. 5. The mobile phone has been paired and connected could connect with BH‐M28 automatically after first using. LED indicator flashes LED Indication State of BH‐M28 Solid blue flashes for 2 seconds on Solid red flashes for 2 seconds off Red and blue flashes alternately pairing mode Blue flashes twice every 5 seconds unconnected standby mode Blue flashes once every 10seconds connected standby mode Red flashes twice every 30seconds low battery warn Solid red light charging Red LED turn out full charging Charging the battery and low battery warn Connect the charger with USB charging cable to the headset, the LED turn red while charging, the LED will turn out after 2‐3 hours after battery is fully charged. When the red LED flashes twice every 30 seconds and will warn every 30seconds to show that the battery runs out , the battery need to charging again . If using 5‐10minutes continually, the headset will power off automatically. Troubleshooting If you cannot connect the headset to your phone, do as follow: 1. Ensure that the headset is charged, switched on ,and paired with and connected to your phone . 2. Ensure that the Bluetooth feature is activated on your phone. 3. Check the headset is within 10meters (30feet) of your phone and that there are no obstructions between the headset and the phone , such as walls or other electronic devices . Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may Shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Never use any charger that is damaged. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If …

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.: SK-BH-M28, SK-BH-M28A

1 Photographs - EUT Constructional Details Test model No.: SK-BH-M28, SK-BH-M28A

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130700392402 Page: 1 of 5 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1307003924RF Applicant: Sky Wing Communication Electronic Co., Ltd. Manufacturer: Sky Wing Communication Electronic Co., Ltd. Factory: Sky Wing Communication Electronic Co., Ltd. Product Name: Bluetooth Headphone Model No.(EUT): SK-BH-M28 Add Model No.: SK-BH-M28A FCC ID: WSGSK-BH-M28 Standards: 47 CFR Part 1.1307(2012) 47 CFR Part 2.1093 (2012) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2013-07-19 Date of Test: 2013-07-23 to 2013-08-19 Date of Issue: 2013-08-27 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130700392402 Page: 2 of 5 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 CONTENTS ............................................................................................................................................ 2 3 GENERAL INFORMATION ..................................................................................................................... 3 3.1 CLIENT INFORMATION ............................................................................................................................. 3 3.2 GENERAL DESCRIPTION OF EUT ............................................................................................................. 3 3.3 TEST LOCATION .................................................................................................................................... 3 3.4 TEST FACILITY....................................................................................................................................... 4 3.5 DEVIATION FROM STANDARDS ................................................................................................................. 4 3.6 ABNORMALITIES FROM STANDARD CONDITIONS......................................................................................... 4 3.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 4 4 SAR EVALUATION .............................................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130700392401 Page: 1 of 76 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1307003924RF Applicant: Sky Wing Communication Electronic Co., Ltd. Manufacturer: Sky Wing Communication Electronic Co., Ltd. Factory: Sky Wing Communication Electronic Co., Ltd. Product Name: Bluetooth Headphone Model No.(EUT): SK-BH-M28 Add Model No.: SK-BH-M28A FCC ID: WSGSK-BH-M28 Standards: 47 CFR Part 15, Subpart C (2012) Date of Receipt: 2013-07-19 Date of Test: 2013-07-23 to 2013-08-19 Date of Issue: 2013-08-27 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM130700392401 Page: 2 of 76 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 (2009) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2009) PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(1) ANSI C63.10 (2009) PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Carrier Frequencies Separation 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Hopping Channel Number 47 CFR Part 15, Subpart C Section 15.247 (b) ANSI C63.10 (2009) PASS Dwell Time 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 15.247(b)(4)&TCB Exclusion List (7 July 2002) ANSI C63.10 (2009) PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) PASS Radiated Spurious emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) PASS Band Edge (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) PASS Remark: Model No.: SK-BH-M28, SK-BH-M28A Only the Model SK-BH-M28 was tested, since the electrical circuit design, layout, components used and internal wiring were identical for all above models. Only different on the Item number. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM130700392401 Page: 3 of 76 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, …

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: SK-BH-M28, SK-BH-M28A 1.1 Conducted Emission 1.2 Radiated Emission 1.3 Radiated Spurious Emission