WT7PTRNKTMBS760MBS Unit -K

MBS USER AND INSTALLATION MANUAL 01.01.00/1 Rev.1 PRODUCT:MBS CODE: D148X01PT_DDS06 VERSION: 04 REVISION: 00 DATE: 14-Nov-2014 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 17 PAGES EDIT.DATEAUTHORDESCRIPTION 1.005-Oct-2011Javier CórdovaFirst edition. 2.002-May-2012Javier Córdova Changes in section 4. Document code and minor editorial changes. 3.019-Dec-2012A. González Addition of labelling information and FCC RF Exposure Requirements. 4.014-Nov-2014F.RivasNew chapters added DOCUMENT APPROVAL ACTIVITYNAMEDATESIGNATURE Prepared Revised Project Manager Approved R&D Director MBS USER AND INSTALLATION MANUAL Code:D148X01PT_DDS06 Date:14-Nov-2014Page:2 of 41 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved MBS USER AND INSTALLATION MANUAL Code:D148X01PT_DDS06 Date:14-Nov-2014Page:3 of 41 01.01.00/1 Rev.1 CONTENTS: 1.INTRODUCTION ......................................................................................................... 4 2.UNPACKING AND CHECKING .................................................................................. 4 3.PREVIOUS CONSIDERATIONS................................................................................. 4 4.LABELLING AND INFORMATION ON SAFETY AND ELECTROMAGNETIC COMPATIBILITY .................................................................................................................. 5 4.1.STANDARDS .......................................................................................................... 7 4.2.UL / SAFETY CERTIFICATIONS ............................................................................ 8 4.3.MECHANICAL AND ENVIRONMENTAL STANDARDS ......................................... 8 4.3.1.STANDARDS CENELEC ................................................................................... 8 4.3.2.STANDARDS MIL-STD 810G ............................................................................ 9 5.EQUIPMENT DESCRIPTION .................................................................................... 11 5.1.VIEW...................................................................................................................... 11 5.2.CONNECTORS ..................................................................................................... 12 5.3.VISUAL INDICATORS ........................................................................................... 13 5.4.DIMENSIONS ........................................................................................................ 14 6.INSTALLATION GUIDE ............................................................................................ 14 6.1.NECESSARY EQUIPMENT ................................................................................... 16 6.2.BASIC PRE-CONFIGURATION ............................................................................ 18 6.3.INSTALLATION ..................................................................................................... 19 6.3.1.MAST/POLE INSTALLATION .......................................................................... 20 6.3.2.WALL INSTALLATION .................................................................................... 25 6.3.3.ANTI-VANDAL KIT INSTALLATION ................................................................ 28 6.3.4.CONNECTIONS .............................................................................................. 30 7.START UP/CONFIGU…

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: Dec. 16, 2014 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: We, TELTRONIC, S.A.U. Poligono Malpica, Calle F-O Parcela 12, 50016 Zaragoza, SPAIN , hereby authorize AT4 wireless, S.A. Parque Tecnologico de Andalucía, C/Severo Ochoa 2, 29590 Campanilas (Málaga), SPAIN Ricardo Orejas Phone: +34 952 619 317, Fax: +34 952 619 113, e-mail:[email protected] to act as o ur agent in all matters relating to applications for equipment authorization/certification submitted to American Certification Body, Inc. (ACB), including the signing of all documents relating to these matters. We certify that submitted documents properly describe the device or system for which equipment certification is sought. We also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. We certify that all of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, TELTRONIC, S.A.U. is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. We acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American Certification Body, Inc. (ACB), still resides with TELTRONIC, S.A.U., Poligono Malpica Calle F-O Parcela 12, 50016 Zaragoza, Spain. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This authorization letter is applicable to the product:Model: MBS Unit –K FCC ID: WT7PTRNKTMBS760 IC: 8624A-PTMBS760 Agency Agreement Expiration Date: Dec. 16, 2015 By: José Román Gimeno Head of R&D Certifications & Services Area T: +34 976 465656 - Ext. : 273 F: +34 976 465722 e-mail:[email protected]

Request for Confidentiality Date: Dec. 16, 2014 Subject: Confidentiality Request for: FCC ID: WT7PTRNKTMBS760; IC: 8624A-PTMBS760 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality RequestedExhibit Short TermPermanentBlock Diagrams Short TermExternal Photos Short TermInternal Photos Short TermPermanentOperation Description/Theory of Operation Short TermPermanentParts List & Placement/BOM/Tune-Up Procedure Short TermPermanentSchematics Short TermTest Setup Photos Short TermUser’s Manual TELTRONIC, S.A.U. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential to be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, José Román Gimeno Head of R&D Certifications & Services Area TELTRONIC, S.A.U. Poligono Malpica Calle F-O Parcela 12, 50016 Zaragoza, Spain T: +34 976 465656 - Ext. : 273 F: +34 976 465722 e-mail:[email protected]

DOSSIER MBS 01.01.00/1 Rev.1 PRODUCT:MBS UNIT –K CODE: D148K01PT VERSION: 01 REVISION: 00 DATE: 14-Nov-2014 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 8 PAGES EDIT.DATEAUTHORDESCRIPTION 1.014-Nov-14F.RivasPictures of MBS DOCUMENT APPROVAL ACTIVITYNAMEDATESIGNATURE Prepared Revised Project Manager Approved R&D Director DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:2 of 8 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:3 of 8 01.01.00/1 Rev.1 CONTENTS: 1.MBS ............................................................................................................................ 4 1.1.INTRODUCTION .................................................................................................. 4 1.2.FRONT PICTURE ................................................................................................. 5 1.3.REAR PICTURE ................................................................................................... 6 1.4.GENERAL PICTURES ......................................................................................... 7 DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:4 of 8 01.01.00/1 Rev.1 1. MBS 1.1. INTRODUCTION The following pictures are: § Front picture § Rear picture § General picture DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:5 of 8 01.01.00/1 Rev.1 1.2.FRONT PICTURE Detailed picture DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:6 of 8 01.01.00/1 Rev.1 1.3.REAR PICTURE DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:7 of 8 01.01.00/1 Rev.1 1.4.GENERAL PICTURES Right picture Left picture Top picture DOSSIER MBS Code: D148K01PT Date: 14-Nov-2014Page:8 of 8 01.01.00/1 Rev.1 Lower picture

MBS IDENTIFICATION LABEL 01.01.00/1 Rev.1 PRODUCT:MBS UNIT –K CODE: D148K01PT_DDS07 VERSION: 01 REVISION: 00 DATE: 14-11-14 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT.DATEAUTHORDESCRIPTION 1.014-Nov-14F.RivasFirst edition. DOCUMENT APPROVAL ACTIVITYNAMEDATESIGNATURE Prepared Revised Project Manager Approved R&D Director MBS IDENTIFICATION LABEL Code:D148K01PT_DDS07 Date:14/11/14Page:2 of 5 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved MBS IDENTIFICATION LABEL Code:D148K01PT_DDS07 Date:14/11/14Page:3 of 5 01.01.00/1 Rev.1 CONTENTS: 1.MBS ............................................................................................................................ 4 1.1.INTRODUCTION .................................................................................................. 4 1.2.LABEL.................................................................................................................. 4 1.3.LABEL LOCATION: ............................................................................................. 5 MBS IDENTIFICATION LABEL Code:D148K01PT_DDS07 Date:14/11/14Page:4 of 5 01.01.00/1 Rev.1 1. MBS 1.1.INTRODUCTION The identification Label is situated in the rear of the MBS Unit. The label is a silver paper polyester film laminate. 1.2.LABEL Label Colours: Silver and Black. Label 1 Label 2 Label 3 MBS IDENTIFICATION LABEL Code:D148K01PT_DDS07 Date:14/11/14Page:5 of 5 01.01.00/1 Rev.1 1.3.LABEL LOCATION: 12 3 Label 1 Label 2 Label 3 MBS IDENTIFICATION LABEL 01.01.00/1 Rev.1 PRODUCT:MBS UNIT –K CODE: D148K01PT_DDS07 VERSION: 01 REVISION: 00 DATE: 14-11-14 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT.DATEAUTHORDESCRIPTION 1.014-Nov-14F.RivasFirst edition. DOCUMENT APPROVAL ACTIVITYNAMEDATESIGNATURE Prepared Revised Project Manager Approved R&D Director MBS IDENTIFICATION LABEL Code:D148K01PT_DDS07 Date:14/11/14Page:2 of 5 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regardi…

Text truncated - open the document above for the full version.

DOSSIER MBS 01.01.00/1 Rev.1 PRODUCT:MBS UNIT -K CODE: D148K01PT VERSION: 01 REVISION: 00 DATE: 2014/11/14 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 19 PAGES EDIT.DATEAUTHORDESCRIPTION 1.014/11/14F.RivasPictures of MBS DOCUMENT APPROVAL ACTIVITYNAMEDATESIGNATURE Prepared Revised Project Manager Approved R&D Director DOSSIER MBS UNIT -K Code: D148K01PT Date:14/11/14Page:2 of 19 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved DOSSIER MBS UNIT -K Code: D148K01PT Date:14/11/14Page:3 of 19 01.01.00/1 Rev.1 CONTENTS: 1.BACKPLANE PCB ............................................................................................................ 4 1.1.BACKPLANE PCB TOP LAYER PICTURE ................................................................... 4 1.2.BACKPLANE PCB BOTTOM LAYER PICTURE ........................................................... 4 2.ENCRYPTION PCB ........................................................................................................... 5 2.1.ENCRYPTION PCB TOP LAYER PICTURE .................................................................. 5 2.2.ENCRYPTION PCB BOTTOM LAYER PICTURE .......................................................... 5 3.MNI PCB ............................................................................................................................ 7 3.1.MNI PCB TOP LAYER PICTURE ................................................................................... 7 3.2.MNI PCB BOTTOM LAYER PICTURE ........................................................................... 7 4.MULTICOUPLER PCB ...................................................................................................... 8 4.1.MULTICOUPLER PCB TOP LAYER PICTURE.............................................................. 8 4.2.MULTICOUPLER PCB BOTTOM LAYER PICTURE ..................................................... 8 5.RCPU PCB ...................................................................................................................... 10 5.1.RCPU PCB TOP LAYER PICTURE.............................................................................. 10 5.2.RCPU PCB BOTTOM LAYER PICTURE ..................................................................... 10 6.RPA PCB ......................................................................................................................... 11 6.1.RPA PCB TOP LAYER PICTURE ................................................................................ 11 6.2.RPA PCB BOTTOM LAYER PICTURE ........................................................................ 11 7.RRX PCB ......................................................................................................................... 13 7.1.RRX PCB TOP LAYER PICTURE ................................................................................ 13 7.2.RRX PCB BOTTOM LAYER PICTURE ........................................................................ 13 8.RTX PCB ......................................................................................................................... 14 8.1.RTX PCB TOP LAYER PICTURE ................................................................................ 14 8.2.RTX PCB BOTTOM LAYER PICTURE ........................................................................ 14 9.SWITCH PCB ........................................................................................…

Text truncated - open the document above for the full version.

THIS MUST BE SIGNED BY THE APPLICANT AND SHOULD BE PLACED ON APPLICANTS LETTERHEAD ONLY IF AGENT IS SUBMITTING APPLICATION American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Date:Jan. 12, 2015 RF exposure analysis for the equipment MBS Unit –K (FCC ID: WT7PTRNKTMBS760; IC:8624A-PTMBS760) The device MBS Unit –K (FCC ID: WT7PTRNKTMBS760; IC: 8624A-PTMBS760) is a device designed to be used mobile/fixed exposure conditions. The analysis provided in this document only covers mobile exposure conditions and for that the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 400 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device can be operated standalone or co-located with another MBS Unit –K. MPE exposure limits The table below is excerpted from Table 1(A) of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), (A) Limits for Occupational/Controlled Exposure”: Frequency Range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) 300 – 1500f (MHz) /3006 The table below is excerpted from RSS-102, Issue 4, 4.4, titled “Field Strength Limits for Controlled Use Devices (Controlled Environment)”: Frequency Range (MHz) Power density (W/m 2 ) Averaging time (minut es) 300 – 1500f (MHz) /306 Using the equation 2 4R PG S p = to calculate the exposure to electromagnetic fields where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Compliance with FCC and IC maximum permissive exposure limits is demonstrated based on the following calculations. 769,012541,0012,589100,0%12,58920100,001258,932,563197,69279,584000,6261,252 774,987541,0012,589100,0%12,58920100,001258,932,583196,93278,504000,6261,252 768,012541,0012,589100,0%12,58920100,001258,932,560197,82279,764000,6261,252 775,987541,0012,589100,0%12,58920100,001258,932,587196,80278,324000,6261,252 768,012541,0012,589100,0%12,58920100,001258,932,560197,82279,764000,6261,252 775,987541,0012,589100,0%12,58920100,001258,932,587196,80278,324000,6261,252 Safety distance to meet MPE limits 1 MBS Unit –K (cm) Avg burst Conduc ted pow er (dBm) (Ma ximum per tune up proce dur e) Frequency (MHz) Ma ximum ante nna gain (numerical) Average radiated power (W) Avg burst Conducted power (W) IC Regulatory domainTechnology TI DLMR – 20 kHz TI DLMR – 20 kHz TETRA - 2 2 kHz Max imum ex pusur e 2 MBS Unit – K co-located (mW/cm 2 ) Evaluation distance/Safety dis…

Text truncated - open the document above for the full version.