X8Q-LM-5X18High Performance Broadband Wireless System

Copyright © 2004-2010 by InfiNet Wireless 1 Revision date: 8 September 2010 OS Version: v1.73 InfiNet Wireless R5000 Technical User Manual Copyright © 2004-2010 by InfiNet Wireless 2 Legal Rights © Copyright 2010 InfiNet Wireless. All rights reserved. The information contained in this document is originated by, proprietary, confidential and owned by InfiNet Wireless. No part of this document should be disclosed, reproduced or distributed without the express written permission of InfiNet Wireless Ltd. InfiNet Wireless Ltd. reserves the right to change the information contained in this document without prior notice. No part of this document may be considered as a part of any contract or warranty. Statement of Conditions The information contained in this manual is subject to change without notice. InfiNet Wireless Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or equipment supplied with it. Disclaimer The software is sold on an "AS IS" basis. InfiNet Wireless, its affiliates or its licensors make no warranties, whatsoever, whether express or implied, with respect to the software and the accompanying documentation. Infinet Wireless specifically disclaims all implied warranties of merchantability and fitness for a particular purpose and non-infringement with respect to the software. Units of product (including all the software) delivered to purchaser hereunder are not fault_ tolerant and are not designed, manufactured or intended for use or resale in applications where the failure, malfunction or inaccuracy of products carries a risk of death or bodily injury or severe physical or environmental damage (―high risk activities‖). High risk activities may include, but are not limited to, use as part of on-line control systems in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, life support machines, weapons systems or other applications representing a similar degree of potential hazard. Infinet wireless specifically disclaims any express or implied warranty of fitness for high risk activities. InfiNet Wireless hereby declares that R5000-Om, R5000-Mm, R5000-Sm and R5000-Lm are in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC and Part 15 of the FCC Rules. The declaration of conformity may be consulted at http://www.infinetwireless.com/products-technologies/type-approval-certificates/DoC_RTTE.pdf. Indication of the countries InfiNet Wireless equipment has no geographical limitations for selling and can be supplied to any country of the world. Limitation of Liability Infinet Wireless shall not be liable to the purchaser or to any third party, for any loss of profits, loss of use, interruption of business or for any indirect, special, incidental, punitive or consequential damages of any kind, whether arising under breach of contract, tort (including negligence), strict liability or otherwise and whether based on this agreement or otherwise, even if advised of the possibility of such damages. To the extent permitted by applicable law, in no event shall the liability for damages hereunder of Infinet Wireless or its employees or agents exceed the purchase price paid for the product by purchaser, nor shall the aggregate liability for damages to all parties regarding any product exceed the purchase price paid for that product by that party (except in the case of a breach of a party‘s confidentiality obligations). International Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Copyright © 2004-2010 by InfiNet Wireless 3 interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Hereby, InfiNet Wireless declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Important statements Changes or modifications not expressly approved by the party responsible for compliance could void the user ̳s authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated outdoor with a minimum distance of 2 meters between the radiator and the human body. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. R5000-Lm is designed to operate in point-to-point only. R5000-Ome is designed to operation in both point-to-point and point-to-multipoint depending on the antenna attached. R5000-Ome and R5000-Lm models have been designed to operate with the antennas listed below, and having a maximum gain of 23 dBi for R5000-Ome and 21 dBi for R5000-Lm. Antennas not included in this list or having a gain greater than specified above are strictly prohibited for use with this device. The required antenna impedance is 50 Ohms. R5000-Ome antennas: Mars Antennas MA-WA56-DP25N – 23 dBi directional antenna (point-to-point) Mars Antennas MA-WC56-DP17 – 17 dBi 60 deg sector antenna (point-to-multipoint) Mars Antennas MA-WD56-DP16 – 16 dBi 90 deg sector antenna (point-to-multipoint) R5000-Lm antennas: Mars Antennas MA-WA56-DP20 - 21 dBi directional antenna (point-to-point) Fixed, point-to-point operation excludes the use of point-to-multipoint systems, omnidirectional applications, and multiple co-located intentional radiators transmitting the sa…

Text truncated - open the document above for the full version.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID:X8Q-LM-5X18 IC:9144A-LM5X18 FCC ID: X8Q-LM-5X18 Photo 1. Front view Photo 2. Rear view Label 1 Label 2

§ 15.247(b) RF Exposure RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit Calculation: EUT’s operating frequency is 5730 - 5845 MHz ;. Highest conducted power = 407 mW. Therefore, Limit for Uncontrolled exposure: 1 mW/cm 2 . Equation from page 18 of OET 65, Edition 97-01 S = P G/ 4R 2 where, S = Power Density mW/m 2 P = Power (mW) R = Distance to the center of radiation of the antenna G = Maximum antenna gain Maximum antenna gain for EUT = 21 dBi = 125.9 P = 407 mW S = 1 mW/cm2 G = 125.9 R = sqrt{407*125.9 / 4(3.1416)(1)} R = 63.8 cm. Therefore, EUT meets the Uncontrolled Exposure limit at 63.8 cm.

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ! BALTIMORE, MARYLAND 21230-3432 ! PHONE (410) 354-3300 ! FAX (410) 354-3313 33439 WESTERN AVENUE ● UNION CITY, CALIFORNIA 94587 ● PHONE (510) 489-6300 ● FAX (510) 489-6372 3162 BELICK STREET ● SANTA CLARA, CALIFORNIA 95054 ● PHONE (408 748-3585 ● FAX (510) 489-6372 The Nation’s First Licensed Nationally Recognized Testing Laboratory August 18, 2010 InfiNet Malta, Ltd. 222 Merchants Street Valletta VLT1170 Malta Dear Andrey Koynov, Enclosed is the EMC Wireless test rep ort for co mpliance testing of the InfiNet Malta, Ltd., Wireless R5 000- Lm/58.300.2x63 as tested to the requir ements of Title 47 of the CFR, Ch. 1 (10-1-0 6 ed.), Part 15, Subpart B, ICES-003, Issue 4 February 2004 for a Class A Digital Device and FCC Part 15 Subpart C, RSS-210, Issue 7, June 2007 for Intentional Radiators. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\InfiNet Malta, Ltd.\EMC29262-FCC247) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. Electromagnetic Compatibility InfiNet Malta, Ltd. Cover Page Wireless R5000-Lm /58.300.2x63 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMC29262-FCC247 © 2010, MET Laboratories, Inc. Page ii of vii DOC-EMC702 2/18/2010 Electromagnetic Compatibility Criteria Test Report for the InfiNet Malta, Ltd. Wireless R5000-Lm/58.300.2x63 Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.247 Subpart C & RSS-210, Issue 7, June 2007 for Intentional Radiators MET Report: EMC29262-FCC247 August 18, 2010 Prepared For: InfiNet Malta, Ltd. 222 Merchants Street Valletta VLT1170 Malta Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility InfiNet Malta, Ltd. Cover Page Wireless R5000-Lm /58.300.2x63 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMC29262-FCC247 © 2010, MET Laboratories, Inc. Page iii of vii DOC-EMC702 2/18/2010 Electromagnetic Compatibility Criteria Test Report for the InfiNet Malta, Ltd. Wireless R5000-Lm/58.300.2x63 Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.247 Subpart C & RSS-210, Issue 7, June 2007 for Intentional Radiators Dusmantha Tennakoon, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of oper ation in accord ance with the requirements of th e FCC Rules Parts 15B, 15.247 and Ind ustry Can ada standards ICES-003, Issue 4 Februar y 2004, R SS-210, Issue 7 , June 2007 un der normal use and maintenance. Shawn McMillen, Wireless Manager, Electromagnetic Compatibility Lab Electromagnetic Compatibility InfiNet Malta, Ltd. Report St atus Wireless R5000-Lm/58.300.2x63 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMC29262-FCC247 © 2010, MET Laboratories, Inc. Page iv of vii DOC-EMC702 2/18/2010 Report Status Sheet Revision Report Date Reason for Revision  August 18, 2010 Initial Issue. Electromagnetic Compatibility InfiNet Malta, Ltd. Table of Contents Wireless R5000-Lm/58.300.2x63 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMC29262-FCC247 © 2010, MET Laboratories, Inc. Page v of vii DOC-EMC702 2/18/2010 Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview.............................................................................................................................................................4 B. References...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample.................................................................................................................................6 E. Equipment Configuration....................................................................................................................................7 F. Support Equipment .............................................................................................................................................8 G. Ports and Cabling Information............................................................................................................................8 H. M…

Text truncated - open the document above for the full version.

Photograph 1. Conducted Emissions Photograph 2. Radiated Emissions Photograph 3. Radiated Spurious Emissions, Test Setup, Below 1 GHz Photograph 4. Radiated Spurious Emissions, Test Setup, Above 1 GHz