XEG-AKBT10Bluetooth Adaptor

X AK-BT10 Bluetooth Adaptor OWNER’S MANUAL IMPORTANT SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For U.S.A Supplier’s Declaration of Conformity Model Number: AK-BT10 Trade Name: TASCAM Responsible party: TEAC AMERICA, INC. Address: 10410 Pioneer Blvd. Suite #1 Santa Fe Springs, California 90670, U.S.A. Telephone number: 1-323-726-0303 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user’s authority to operate this equipment. For Canada THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. Hereby, TEAC Corporation declares that the radio equipment type AK-BT10 is in compliance with Directive 2014/53/EU, and the other Directives or Commission Regulations. The full text of the EU declaration of conformity is available at the following internet address: Please contact us by e-mail. https://tascam.eu/en/kontakt.html EU Importer: TEAC Europe GmbH Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8.Only use attachments/accessories specified by the manufacturer. 9.Unplug this apparatus during lightning storms or when unused for long periods of time. 10.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until it has been repaired. CAUTION •Do not expose this apparatus to drips or splashes. •Do not place any objects filled with liquids, such as vases, on the apparatus. For European Customers Disposal of electrical and electronic equipment (a) All electrical/electronic equipment and waste batteries/accumulators should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities. (b) By disposing of electrical/electronic equipment and waste batteries/accumulators correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment. (c) Improper disposal of waste electrical/electronic equipment and batteries/ accumulators can have serious effects on the environment and human health because of the presence of hazardous substances in the equipment. (d) The Waste Electrical and Electronic Equipment (WEEE) symbols, which show wheeled bins that have been crossed out, indicate that electrical/ electronic equipment and batteries/accumulators must be collected and disposed of separately from household waste. (e) Return and collection systems are available to end users. For more detailed information about the disposal of old electrical/electronic equipment and waste batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the equipment. CAUTION •IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. •USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Wireless equipment precautions Compliance of radio transmitter and interference This product has the function of broadband transmitter using 2.4GHz Band. Use frequency range: 2402 MHz - 2480 MHz Maximum output power: Bluetooth® Class 2 (less than 2.5 mW) Please use only in the country where you purchased the product. Depending on the country, restrictions on the use of Bluetooth wireless technology might exist. Model for USA This module is granted of Equipment Authorization under the Authority of the Federal Communications Commission. Model for Canada Compliance of radio transmitter This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. 1) This device may not cause interference. 2) This device must accept any interference, including interference that may c…

Text truncated - open the document above for the full version.

Rev11/20/07 TEACCorporation FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:XEG-AKBT10 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription Block SCH OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName ManualUsermanual ExternalPhotosExternalPhotos InternalphotosInternalphotos SetupphotoSetupphoto Sincerely, AkiraSekiguchi 2021-06-17

TEACCorporation (Date)6/17/2021 (BluetoothAdaptor)FCCID:XEG-AKBT10 isseekingFCCAuthorizationasaSingleModulartransmitter/ checkone) TheEUTmeetstherequirementsforSingleModularapproval/ checkone) SingleLimitedModularApproval(Please SingleLimitedModularApproval(please asdetailedinKDB996369.Compliancetoeachoftherequirementsisdescribedbelow: ItemModularrequirementYesNo Pleaseprovideadetailedexplanationifthe answeris“No.” 1 HaveitsownRFshielding √ 2 Havebufferedmodulation/datainputs(ifsuchinputs areprovided) √ 3 Themodulartransmittermusthaveitsownpower supplyregulation. √ 4 Meettheantennarequirementsofsection15.203 √ 5 Betestedinastand-aloneconfiguration,i.e.,the antenna,ACorDCpoweranddatainput/outputlines mustbeconnectedtothemodulebut,themodule mustnotbeinsideanothercaseduringtesting. √ 6 BelabeledwithitsownFCCIDnumber,andifthe FCCIDisnotvisiblewhenthemoduleisinstalled insideanotherdevice,thentheoutsideofthedevice intowhichthemoduleisinstalledmustalsodisplay alabelreferringtotheenclosedmodule. √ 7 Themodulartransmitterismanufacturedsothatthe usercannotinfluencetheoperationofthe transmitterthatwilloperateoutsideofthescopeof theregulations. √ 8 AddresscompliancewiththeCommission`sRF exposurelimitsinSections1.1310and2.1093. √ Note: (1)LMAmaybegrantedwhenoneormoreoftherequirementsinthetableabovecannotbedemonstrated. LMAwillalsobeissuedinthoseinstanceswhereapplicantscandemonstratethattheywillretaincontroloverthefinalinstallationofthe device,suchthatcomplianceoftheendproductisassured.Insuchcases,anoperatingconditionontheLMAforthemodulemuststatethat themoduleisonlyapprovedforusewheninstalledindevicesproducedbyaspecificmanufacturer. WhenLMAissought,theapplicationforequipmentcertificationmustspecificallystatehowcontroloftheendproductintowhichthemodule willbeinstalled,andwillbemaintained,suchthatfullcomplianceoftheendproductisalwaysensured. (2)PleaseprovideClearandspecificinstructionsdescribingtheconditions,limitationsandproceduresforthird-partiestouseand/orintegrate themoduleintoahostdevice. (3)Fornon-SoftwareDefinedRadiotransmittermoduleswheresoftwareisusedtoensurecomplianceofthedevice,technicaldescriptionof howsuchcontrolisimplementedtoensurepreventionofthirdpartymodificationmustbeprovided(seeKDB594280). Note1:Complianceofamoduleinitsfinalconfigurationistheresponsibilityoftheapplicant.Ahostdevicewillnotbeconsidered certifiediftheinstructionsregardingantennaconfigurationprovidedintheoriginaldescription,ofoneormoreseparatelycertified modulesitcontains,werenotfollowed. Example:Aseparatelycertifiedlow-powertransceivermoduleusingBluetoothtechnologywhichishousedinadesktopcomputer, laptoporperipheraldoesnotrequiretheoverallsystemtoberecertified,ifthedesktopcomputer,laptoporperipheral,asastand- aloneunit,complieswithallapplicabletechnicalstandards. AkiraSekiguchi 2021-06-17

TEACCorporation FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2021-06-17 SUBJECT:FCCApplicationfor(FCCID:XEG-AKBT10) ToWhomItMayConcern: We,theundersigned,herebyauthorizeSamLvatEMTEK(DONGGUAN)CO.,LTD.on ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhave thesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, AkiraSekiguchi 2021-06-17

FCCID:XEG-AKBT10

Label&Location

FCCID:XEG-AKBT10

RFEXPOSUREEVALUATION EUTSpecification EUTBluetoothAdaptor ModelNumber AK-BT10 FCCIDXEG-AKBT10 Antennagain(Max)0dBi OperationFrequency2408MHz-2480MHz InputRatingDC3.3V ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 ModulationBTEDR:GFSK,π/4-DQPSK，8DPSK BTBLE:GFSK Max.outputpowerBTEDR:1.99dBm(0.00158W) BTBLE:1.84dBm(0.00153W) TestRequirement: RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. 2MeasurementResult Operati on Mode Channel Frequenc y(MHz) Measur ed Power (dBm) Tune up toleran ce (dBm) Maxtune up conducted power (dBm) Output Peak power (mW) Power densityat 20cm (mW/ cm2) LimitVerdict GFSK 2402 1.991±1 21.5850.0003151PASS 2441 1.681±1 21.5850.0003151PASS 2480 1.141±121.585 0.0003151PASS Π/4-DQ PSK 2402 1.921±121.585 0.0003151PASS 2441 1.471±121.585 0.0003151PASS 2480 1.171±121.585 0.0003151PASS 8DPSK 2402 1.941±121.585 0.0003151PASS 2441 1.661±121.585 0.0003151PASS 2480 1.181±121.585 0.0003151PASS Signature: SamLv Date:2021-06-17 Operati on Mode Channel Frequenc y(MHz) Measur ed Power (dBm) Tune up toleran ce (dBm) Maxtune up conducted power (dBm) Output Peak power (mW) Power densityat 20cm (mW/ cm2) LimitVerdict GFSK 2402 -0.240±1 11.2590.0002501PASS 2440 0.96 0 ± 1 11.2590.0002501PASS 2480 1.841±121.585 0.0003151PASS

ReportNo. ED210528095W1Page1 of 60Ver.1.0 TEST REPORT ProductName：BluetoothAdaptor ModelNumber：AK-BT10 FCC ID：XEG-AKBT10 Preparedfor:TEACCorporation Address:1-47 Ochiai,Tama-shi,Tokyo,Japan Preparedby:EMTEK(DONGGUAN)CO., LTD. Address:-1&2/F.,Building2, ZoneA, ZhongdaMarineBiotechnology Reserchand DevelopmentBase,No.9,XinchengAvenue, SongshanhuHigh-technologyIndustrialDevelopmentZone, Dongguan,Guangdong,China TEL:+86- 0769-22807078 FAX:+86- 0769-22807079 ReportNumber:ED210528095W1 Date (s) of Test s:Jun 8, 2021to Jun 17, 2021 Dateof issue:Jun 17, 2021 $二维码$ ReportNo. ED210528095W1Page2 of 60Ver.1.0 Table of Contents TESTREPORT.........................................................................................................................................................1 1 TEST RESULTCERTIFICATION...........................................................................................................................3 2 EUT TECHNICALDESCRIPTION........................................................................................................................4 3 SUMMARYOF TEST RESULT..............................................................................................................................5 4 TEST METHODOLOGY.........................................................................................................................................6 4.1 GENERALDESCRIPTIONOF APPLIEDSTANDARDS..............................................................................6 4.2 MEASUREMENTEQUIPMENTUSED .........................................................................................................6 4.3 DESCRIPTIONOF TEST MODES..................................................................................................................7 5 FACILITIESAND ACCREDITATIONS.................................................................................................................8 5.1 FACILITIES......................................................................................................................................................8 5.2 LABORATORYACCREDITATIONSAND LISTINGS..................................................................................8 6 TEST SYSTEMUNCERTAINTY...........................................................................................................................9 7 SETUPOF EQUIPMENTUNDERTEST .............................................................................................................10 7.1 RADIOFREQUENCYTEST SETUP1.........................................................................................................10 7.2 RADIOFREQUENCYTEST SETUP2.........................................................................................................10 7.3 CONDUCTEDEMISSIONTEST SETUP.....................................................................................................12 7.4 BLOCKDIAGRAMCONFIGURATIONOF TEST SYSTEM.....................................................................13 7.5 SUPPORTEQUIPMENT................................................................................................................................13 8 FREQUENCYHOPPINGSYSTEMREQUIREMENTS.....................................................................................14 8.1 STANDARDAPPLICABLE...................................................................................................................................14 8.2 EUT PSEUDORANDOMFREQUENCYHOPPINGSEQUENCE...............................................................................14 8.3 EQUALHOPPINGFREQUENCYUSE..................................................................................................................15 8.4 FREQUENCYHOPPINGSYSTEM........................................................................................................................15 9 TEST REQUIREMENTS.......................................................................................................................................16 9.1 20D B BANDWIDTH......................................................................................................................................16 9.2 CARRIERFREQUENCYSEPARATION......................................................................................................22 9.3 NUMBEROF HOPPINGFREQUENCIES....................................................................................................28 9.4 AVERAGETIME OF OCCUPANCY(DWELLTIME) .................................................................................30 9.5 MAXIMUMPEAK CONDUCTEDOUTPUTPOWER................................................................................34 9.6 CONDUCTEDSUPRIOUSEMISSION........................................................................................................40 9.7 RADIATEDSPURIOUSEMISSION.............................................................................................................47 9.8 CONDUCTEDEMISSIONTEST ..................................................................................................................56 9.9 ANTENNAAPPLICATION............................................................................................................................59 ReportNo. ED210528095W1Page3 of 60Ver.1.0 1 TEST RESULTCERTIFICATION Applicant:TEACCorporation Address:1-47 Ochiai,Tama-shi,Tokyo,Japan Manufacturer:TEACCorporation Address:1-47 Ochiai,Tama-shi,Tokyo,Japan EUT:BluetoothAdaptor ModelName:AK-BT10 Trademark:TASCAM MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTEST RESULT FCC47 CFRPart 2, SubpartJ FCC47 CFRPart 15, SubpartC PASS The aboveequipmentwas testedby EMTEK(DONGGUAN) CO.,LTD.The test data,data evaluation, test procedures,and equipmentconfigurationsshownin this reportweremadein accordancewith the proceduresgivenin ANSIC63. 10 (20 13 ) and the energyemittedby the sampleEUT testedas described in this reportis in compliancewith the requirements…

Text truncated - open the document above for the full version.

FCCID:XEG-AKBT10