XGS-CT3600Refrigerated shipping container tracking device

March 19, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: XGS-CT3600 ORBCOMM License Corp. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. ORBCOMM License Corp. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Walter Sonnenfeldt Title: VP, Regulatory Affairs Company Name: ORBCOMM License Corp Date:3/19/2024 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

ORBC-CERT-HW24036 Rev 1.0 U.S. Agent Designation for Service of Process - Certification Attestation Letter March 19, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: XGS-ST6000 Per section 2.911(d)(7) of the FCC rules, ORBCOMM License Corp. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: ORBCOMM License Corp. Physical U.S. Company Address: 395 W PAS395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ, 07662 USA Agent name: Walter Sonnenfeldt Agent Email Address: [email protected] FRN: 0004379202 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Si gned: Printed name: Walter H. SonnenfeldtPrinted name: Click here to enter text. Title: VP Re gulatory Affairs,Title: Click here to enter text. Compan y Name: ORBCOMM Inc. Company Name: Click here to enter text. Date: March 19, 2024 Date: Click here to enter a date. 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM ORBO-CERT-HW24033 Rev 1.0 March 18, 2024 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification of CT3600 mobile tracking device, Model Number CT3600. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides ORBCOMM License Corp., at 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA Dated this 18th Day of March 2024 Agency agreement expiration date: March 17th, 2025 By: Walter Sonnenfeldt Signature Printed Title: VP Regulatory Affairs 1-585-461-3018 Telephone: On behalf of: ORBCOMM License Corp.

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM ORBC‐CERT‐HW24032 Rev 1.0 March 18, 2024 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: XGS-CT3600 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS: Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed : Printed name: Walter Sonnenfeldt Title: VP Regulatory Affairs

3.000 REF 1.000 REF .188 X 45° REF QR CODE TO BE 10mm MIN SEE NOTE 11 SEE BOX 2SEE BOX 1 NOTES: PRODUCTION TO BE VERIFIED SEE BOX 3 SEE BOX 4 SEE BOX 5 SEE BOX 6 REVISIONS REVECO DESCRIPTIONDATE APPROVAL AINITIAL RELEASE FINISH WHT POLYESTER LBL STOCK (P/N MD702433) REFER TO LABEL STOCK MATERIAL DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 1 OF 2 2019-05-03 LAZAR RMUŠ SR402490-000 DO NOT SCALE FROM DRAWING A THIRD ANGLE PROJECTION TITLE LINE 3 MAIN ISN LABEL CT3600 MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B Mexico COMPLETE PART NUMBER (EXAMPLE ONLY) CURRENT REVISION (EXAMPLE ONLY) PART NUMBER BUILD STRUCTURE VARIANT TABLE VARIANT PART NUMBER PART REVISIONBRANDING BOX 1: UNIT PART NUMBER & REV SEE NOTE 5 & BUILD STRUCTURE BOX 2: UNIT SERIAL NUMBER SEE NOTE 7 X = INCLUDE BLANK = EXCLUDE BOX 3: CCID NUMBER SEE NOTE 8 X = INCLUDE BLANK = EXCLUDE BOX 4: IMEI NUMBER SEE NOTE 9 X = INCLUDE BLANK = EXCLUDE BOX 5: DEV EUI NUMBER SEE NOTE 10 X = INCLUDE BLANK = EXCLUDE BOX 6: QR CODE SEE NOTE 12 X = INCLUDE BLANK = EXCLUDE SR402490-001SEE BOMORBCOMMCT3600-0100-HXXXX CT3 5 0 0-WXYZ-S_R R FINISH WHT POLYESTER LBL STOCK (P/N MD702433) REFER TO LABEL STOCK MATERIAL DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 2 OF 2 2019-05-03 LAZAR RMUŠ SR402490-000 DO NOT SCALE FROM DRAWING A THIRD ANGLE PROJECTION TITLE LINE 3 MAIN ISN LABEL CT3600 MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B

3.000 REF 1.000 REF .188 X 45° REF XGS-CT3600 11881A-CT3600 XMR202212EG21GL 10224A-2022EG21GL SEE VARIANT TABLE BOX 5 SEE VARIANT TABLE BOX 6 SEE VARIANT TABLE BOX 7 NOTES: REVISIONS REVECO DESCRIPTIONDATE APPROVAL A FINISH WHT POLYESTER LBL STOCK (P/N MD702433) REFER TO LABEL STOCK MATERIAL DRAWN BY DATE TITLE: DWG. NO.REV SHEET 1 OF 2 2021-04-20 LAZAR RMUŠ SR402502-000 DO NOT SCALE FROM DRAWING A THIRD ANGLE PROJECTION CERTIFICATIONS LABEL CT3600 MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B VARIANT PRINTING TABLE LABEL VARIANT PRODUCT VARIANT BOX 1 BLE FCC ID (BLUETOOTH) BOX 2 BLE FCC IC# (BLUETOOTH) BOX 3 FCC ID/LTE ID (CELLULAR) BOX 4 IC# /LTE IC# (CELLULAR) BOX 5 ISM FCC ID (LoRa) BOX 6 ISM IC# (LoRa) BOX 7 VARIANT SPECIFC CERTIFICATIONS -001CT3600-0100-H XGS-CT360011881A-CT3600XMR202212EG21GL10224A-202212EG21GL FINISH WHT POLYESTER LBL STOCK (P/N MD702433) REFER TO LABEL STOCK MATERIAL DRAWN BY DATE TITLE: DWG. NO.REV SHEET 2 OF 2 2021-04-20 LAZAR RMUŠ SR402502-000 DO NOT SCALE FROM DRAWING A THIRD ANGLE PROJECTION CERTIFICATIONS LABEL CT3600 MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and RSS-102 Annex C – MPE Calculation; Date: May 2021 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT – APFWL Report ID: Project ID: REP032377 PRJ0053969 Type of assessment: MPE Calculation report Manufacturer: ORBCOMM LICENCE Corp. (ORBCOMM Inc.) Hardware Version Identification Number (HVIN): Product Marketing Name (PMN): CT3600 CT 3600 FCC identifier: ISED certification number: FCC ID: XGS-CT3600 IC: 11881A-CT3600 Contains FCC identifier: Contains ISED certification number: FCC ID: XMR202212EG21GL IC: 10224A-2022EG21GL Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: March 22, 2024 Kevin Rose, EMC/RF Specialist Prepared by Signature Section 1 Evaluation summary Report reference ID: REP032377 Page 2 of 7 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Section 1 Evaluation summary Report reference ID: REP032377 Page 3 of 7 Evaluation summary 1.1 MPE calculation for standalone transmission References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 4 For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 1.1-2: Table 4 to RSS-102— RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz. Section 1 Evaluation summary Report reference ID: REP032377 Page 4 of 7 References, definitions and limits, continued Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) EUT technical information Prediction frequency 2402 MHz Antenna type Integrated antenna Antenna gain 3.7 dBi Number of antenna…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.247 and RSS-247; Date: September 07, 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID: Project number: REP032376 PRJ0053969 Type of assessment: Final product testing Type of radio equipment: Spread Spectrum/Digital Device (2400–2483.5 MHz) Equipment class: DTS Applicant: Description of product: ORBCOMM LICENCE Corp. (ORBCOMM Inc.) Refrigerated shipping container tracking device Model/HVIN: Product marketing name (PMN): CT3600 CT 3600 FCC identifier: ISED certification number: FCC ID: XGS-CT3600 IC: 11881A-CT3600 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247  RSS-247, Issue 3, August 2023, Section 5 Date of issue: March 22, 2024 Kevin Rose, EMC/RF Specialist Tested by Signature Andrey Adelberg, Senior WL/EMC Specialist Reviewed by Signature Report reference ID: REP032376 Page 2 of 38 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP032376 Page 3 of 38 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Section 1 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Section 2 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Model variant declaration ........................................................................................................................................................................................ 5 2.4 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Section 3 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Section 4 Information provided by the applicant .........................................…

Text truncated - open the document above for the full version.

CT3600 BLE Antenna Internal Part Number: MD702301 F-Inverted Metal BLE Ant. Page 1 Technical data Dimensions24.18 mm ×13.6mm x 0.3 mm Temperature range -40 ~ +85°C Frequency range 2400 -2480 MHz Impedance50 Ohm VSWR ≤ 2.2 Gain (realized gain) 3.64dBi max 2400MHz 3.73dBi max 2440MHz 3.72dBi max 2480MHz Efficiency 88% ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Antenna Reflection Coefficient: Page 2 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Antenna Excitation: Page 3 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Antenna Mismatch Loss: Page 4 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Antenna Far Field Total Radiated Power: Page 5 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Antenna Max Realized Gain (dBi): Page 6 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 7 Antenna Radiation Patterns: Page 7 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 8 Antenna Far Field: Page 8 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 2.4 GHZ, Phi=0 deg 9 Antenna Far Field: Page 9 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 2.4 GHZ, Phi=90 deg