XGS-ST8100Mobile Satellite/Terrestrial Dual Mode Communication Terminal

ORBC-CERT-HW26011 Rev 1.1 Jan 26, 2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada Covered Equipment Certification Attestation Letter Applicant: ORBCOMM LISENCE CORP. FCC ID: XGS-ST8100 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signed: Printed name: Walter Sonnenfeldt Title: VP, Regulatory Affairs Company Name: ORBCOMM License Corp Email: [email protected] Date: 1/26/2026 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

ORBC-CERT-HW26010 Rev 1.1Dated: Jan 26, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 U.S. Agent Designation for Service of Process Attestation Letter FCC ID: XGS-ST8100 Applicant FRN: 0004379202. This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: • Company Name: ORBCOMM License Corp. • Physical U.S. Company Address: 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA • Agent Name*: Walter Sonnenfeldt. • Agent Email Address: [email protected] • Agent FRN**: 0004379202 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Signed: Printed name: Walter Sonnenfeldt Title: VP, Regulatory Affairs Company Name: ORBCOMM License Corp. Phone: (585) 461-3018 Email: [email protected]

ORBC-CERT-HW26010 Rev 1.1 Dated: Jan 26, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification of ST8100. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti-Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: Jan 25 th , 2027 *Up to 12 months Sincerely, Signature: Name: Walter Sonnenfeldt Title: VP, Regulatory Affairs 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM ORBC‐CERT‐HW26014 Rev 1.0 Jan 19, 2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: XGS-ST8100 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, applicant ORBCOMM License Corp. hereby requests confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS: Internal Photos External Photos User Manual Test Set-up Photographs When the device is mark eted before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all acc ompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed : Printed name: Walter Sonnenfeldt Title: VP Regulatory Affairs

Label and Label Location Exhibit Model Number: ST8100 FCC ID: XGS-ST8100 IC: 11881A-ST81 Applicant: ORBCOMM License Corp. Date: January 27, 2026 Sample Label Format 2. Label Location The label is located on the back panel of the device. Label Location Photo

2.395 REF 3.270 REF NOTES: REFERENCE BOM FOR SPECIFIC LABEL STOCK. PRINTABLE, PERMANENT POLYESTER LABEL MATERIAL. 1. SUBSTITUTE WITH ORBCOMM APPROVAL ONLY. USE RECOMMENDED RIBBONS FOR LABEL STOCK. SUBSTITUTE LABEL DEVIATION WITH ORBCOMM APPROVAL 2. ONLY. PARTS TO BE MANUFACTURED IN COMPLIANCE WITH THE MOST CURRENT RoHS & REACH DIRECTIVE. 3. REFERENCE THE LATEST REVISION OF MASTER ARTWORK FILE SR402505-00X.SVG FOR PRINT TEMPLATE.4. REFERENCE DOC100186 FOR PART NUMBERING FORMATS.5. REFERENCE VIEW A-A AND TOP LEVEL BOM FOR PART NUMBERING FORMATS.6. REFER TO THE VARIANT PRINTING TABLE ON PAGE 2 WHICH DETAILS PRINTING INFORMATION FOR BOXES 1-5. 7. IN TEXT FORMAT, ADD PART NUMBER AND REVISION IN THE FORMAT SHOWN IN VIEW A-A. 8. IN TEXT FORMAT, ADD THE SERIAL NUMBER (WHICH IS THE SAT ID) IN THE FORMAT "XXXXXXXXXORBXXXX". 9. IN TEXT FORMAT, ADD THE 15-DIGIT IMEI NUMBER OR 14-DIGIT MEID NUMBER SCANNED FROM THE UNIT'S 10. CELLULAR MODEM MODULE. IN TEXT FORMAT, ADD THE COMPLETE (19 OR 20 CHARACTERS) ICC ID (SIM) NUMBER SCANNED FROM THE 11. UNIT SIM CARD, UNIT CARD, OR A LOOK-UP TABLE. IN TEXT FORMAT, ADD THE SAT ID NUMBER IN THE FORMAT "XXXXXXXXXORBXXXX"12. PRINT THE QR CODE TEXT STRING WITH COMMA SEPARATED FIELDS. IF A FIELD IS BLANK, USE TWO COMMAS 13. (",,") BEFORE THE NEXT FIELD: UNIT SERIAL NUMBER• UNIT PART NUMBER & REVISION IN THE FORMAT SHOWN IN VIEW A-A• IMEI NUMBER• ICC ID (SIM ID)• SAT ID• IN TEXT, PRINT THE NAME OF THE COUNTRY THAT THE PRODUCT WAS MANUFACTURED IN.14. THE LABEL ARTWORK SHOWN IN THIS VIEW IS FOR REFERENCE ONLY ST8100 XGS­ST8100 11881A­ST8100 XPYUBX20VA01 8595A­UBX20VA01 SEE NOTE 14 SEE VARIANT PRINTING TABLE VIEW A-A COMPLETE PART NUMBER (EXAMPLE ONLY) ST8100-WXYZ-S_RR CURRENT REVISION (EXAMPLE ONLY) SEE NOTE 13 SEE NOTE 8 SEE NOTE 9 SEE NOTE 10 SEE NOTE 11 SEE NOTE 12 VARIANT SPECIFIC CERTIFICATIONS SEE VARIANT PRINTING TABLE HAZLOC DETAILS SEE VARIANT PRINTING TABLE B B REVISIONS REVECO DESCRIPTIONDATE APPROVAL A7626INITIAL RELEASE29-JUL-25B. HART B7806 REMOVED IPX9K MARKING. UPDATED VARIANT TABLE DESCRIPTION. 05-DEC-25B. HART VARIANT TABLE VARIANT PART NUMBER PART REVISION CHANGING VARIABLE: DESCRIPTION SR402505-001DLBL ST81 MAIN ORBCOMM 3.27x2.395in FINISH SEE NOTES N/A DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 1 OF 2 2025-07-21 JEFF ROBINSON SR402505-000 DO NOT SCALE FROM DRAWING B THIRD ANGLE PROJECTION ST81 MAIN ID LABEL MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 22970 Indian Creek Drive, Suite 300 Sterling, VA, 20166, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B VARIANT PRINTING TABLE UNIT PART NUMBER DESCRIPTION BOX 1 MODEL NO BOX 2 SAT FCC ID (SATELLITE) BOX 3 SAT IC ID (SATELLITE) BOX 4 LTE FCC ID (CELLULAR) BOX 5 LTE IC ID (CELLULAR) VARIANT SPECIFIC CERTIFICATIONS TO PRINT VARIANT SPECIFIC HAZLOC DETAILS TO PRINT -X1X0GL LTE+OGXST8100XGS-ST810011881A-ST8100XPYUBX20VA018595A-UBX20VA01 FINISH SEE NOTES N/A DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 2 OF 2 2025-07-21 JEFF ROBINSON SR402505-000 DO NOT SCALE FROM DRAWING B THIRD ANGLE PROJECTION ST81 MAIN ID LABEL MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 22970 Indian Creek Drive, Suite 300 Sterling, VA, 20166, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and ISED MPE Calculation; Date: July 2024 Choose Scandinavian trust RADIO TEST REPORT Report ID Project ID REP142669 PRJ0092517 Type of assessment: MPE Calculation report Manufacturer: ORBCOMM License Corp. Product Marketing Name (PMN): Hardware Version Identification Number (HVIN): Mobile Satellite/Terrestrial Dual Mode Communication Terminal ST8100 FCC IDs: ISED certification numbers: XGS-ST8100, XPYUBX20VA01 11881A-ST8100, 8595A-UBX20VA01 Specification:  FCC 47 CFR Part 1 Subpart I, §1.1307, §1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 6 (December 2023) RSS-102 Annex A ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the applicable RF exposure limits set forth in RSS-102. Date of issue: February 3, 2026 Andrey Adelberg, Senior EMC/RF Specialist Prepared by Signature Report reference ID: REP142669 Page 2 of 6 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP142669 Page 3 of 6 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE calculation for simultaneous transmission ....................................................................................................................................................... 4 Section 1.1 MPE calculation for simultaneous transmission Report reference ID: REP142669 Page 4 of 6 Evaluation summary 1.1 MPE calculation for simultaneous transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1) — Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. Section 1.1 MPE calculation for simultaneous transmission Report reference ID: REP142669 Page 5 of 6 References, definitions and limits, continued RSS-102, Section 5.1 Through this standard, ISED adopts Health Canada’s RF exposure guideline entitled Limits of Human Exposure to Radiofrequency Electromagnetic Energy in the Frequency Range from 3 kHz to 300 GHz (Safety Code 6) and its Notice: Localized human exposure limits for radiofrequency fields in the range of 6 GHz to 300 GHz. Table 1.1-2: Table 7&8 to RSS-102 — RF Field Strength and power density Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for controlled-use devices (controlled environment) 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 …

Text truncated - open the document above for the full version.

ST8100 (BLE) Antenna •Antenna type: Inverted F Antenna Page 1 Technical data Dimensions (L x W x H)25 mm × 6 mm x .3 mm Temperature range -40 ~ +85°C Frequency range 2.4 – 2.485 GHz Impedance50 Ohm VSWR ≤ 1.9:1 Gain (Realized gain)Phi: 3.08 dBi max. Theta: 2.98 dBi max. PolarizationLinear ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 Realized Gain Page 2 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 M a x Antenna Radiation Patterns Page 3 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.4 GHz Theta Polarization Phi Polarization Antenna Radiation Patterns Page 4 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.4425 GHz Theta Polarization Phi Polarization Antenna Radiation Patterns Page 5 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.485 GHz Theta Polarization Phi Polarization

ST8100 Cellular (2G/3G/4G/5G) Antenna • Antenna type: Cell antenna built on PCB Page 1 Technical data 60 mm ×18 mm x 7 mmDimensions -40 ~ +85°CTemperature range 698 -960 MHzLow:Frequency range 1710 -2690 MHzHigh: 50 OhmImpedance ≤ 7.3 for 698-960MHz ≤2.3 for 1710-2690MHzVSWR 3.0dBi max 698-960MHz 3.0dBi max 1710-2000MHz 3.4dBi max 2000-2170MHz 4.0dBi max 2300-2690MHz Gain (Total realized gain) LinearPolarization ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 Revision:1.1 Antenna Total Realized Gain Page 2 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 Preliminary Data Sheet3 Antenna Radiation Patterns Page 3 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 698MHz 850MHz Preliminary Data Sheet4 Antenna Radiation Patterns Page 4 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 900MHz 960MHz Antenna Radiation Patterns Page 5 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 1710MHz 1800MHz Antenna Radiation Patterns Page 6 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2300MHz 2700MHz

ST8100 Satellite Patch Antenna Page 1 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 Revision:1.1 Mechanical specifications Antenna specifications Model number DescriptionItem ST8100 Satellite Patch AntennaMD702624 TypicalItem 44mm ×40mm x 15 mmDimensions (L x W x H) (includng pins) 65 gWeight (includng pins) -40 ~ +85°CTemperature range MaxTypicalMinItem PatchAntenna type RHCPPolarization 1660.51525Frequency band (MHz) 50Impedance (Ohm) <2.0VSWR (With matching network) 54.2Max gain (dBi) Antenna Radiation Patterns Page 2 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 1543MHz 1645MHz

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC Part 25 and RSS-170.docx; Date: October 22, 2025 Choose Scandinavian trust RADIO TEST REPORT Report ID: Project number: REP142664 PRJ0092517 Type of assessment: Final product testing Applicant: ORBCOMM License Corp. Product: Model: Mobile Satellite/Terrestrial Dual Mode Communication Terminal ST8100 FCC identifier: ISED certification number: FCC ID: XGS-ST8100 IC: 11881A-ST8100 Specification:  FCC 47 CFR Part 25  RSS-170, Issue 4, September 29, 2022 Date of issue: February 2, 2026 Alvin Liu, EMC/RF Specialist Tested by Signature Tarek Elkholy, EMC/RF Engineer Reviewed by Signature Report reference ID: REP142664 Page 1of 36 Lab and test locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP142664 Page 2of 36 Table of contents Table of contents .......................................................................................................................................................................................................... 2 Section 1. Report summary ................................................................................................................................................................................. 3 1.1 Test specifications .................................................................................................................................................................................................... 3 1.2 Test methods ............................................................................................................................................................................................................ 3 1.3 Exclusions ................................................................................................................................................................................................................. 3 1.4 Statement of compliance ......................................................................................................................................................................................... 3 1.5 Test report revision history ...................................................................................................................................................................................... 3 Section 2. Engineering considerations .................................................................................................................................................................. 4 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 4 2.2 Technical judgment .................................................................................................................................................................................................. 4 2.3 Model variant declaration ........................................................................................................................................................................................ 4 2.4 Deviations from laboratory tests procedures ........................................................................................................................................................... 4 Section 3. Test conditions .................................................................................................................................................................................... 5 3.1 Atmospheric conditions ........................................................................................................................................................................................... 5 3.2 Power supply range .................................................................................................................................................................................................. 5 Section 4. Information provided by the applicant ................................................................................................................................................ 6 4.1 Disclaimer .......................................................................................................................…

Text truncated - open the document above for the full version.