XGS-CT5300Industrial Assets Tracking & management System

ORBC-CERT-HW26001 Rev 1.0 Jan 16, 2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada Covered Equipment Certification Attestation Letter Applicant: ORBCOMM LISENCE CORP. FCC ID: XGS-CT5300 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signed: Printed name: Walter Sonnenfeldt Title: VP, Regulatory Affairs Company Name: ORBCOMM License Corp Email: [email protected] 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

ORBC-CERT-HW26010 Rev 1.1Dated: Jan 26, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 U.S. Agent Designation for Service of Process Attestation Letter FCC ID: XGS-CT5300 Applicant FRN: 0004379202. This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: • Company Name: ORBCOMM License Corp. • Physical U.S. Company Address: 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA • Agent Name*: Walter Sonnenfeldt. • Agent Email Address: [email protected] • Agent FRN**: 0004379202 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Signed: Printed name: Walter Sonnenfeldt Title: VP, Regulatory Affairs Company Name: ORBCOMM License Corp. Phone: (585) 461-3018 Email: [email protected]

ORBC-CERT-HW26010 Rev 1.1 Dated: Jan 26, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification of ST8100. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti-Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: Jan 25 th , 2027 *Up to 12 months Sincerely, Signature: Name: Walter Sonnenfeldt Title: VP, Regulatory Affairs 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM ORBC-CERT-HW26004 Rev 1.0 Jan 16, 2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: XGS-CT5300 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, applicant ORBCOMM License Corp. hereby requests confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS: Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed: Printed name: Walter Sonnenfeldt Title: VP Regulatory Affairs

Label design: Label location: (on the back of the product)

2.395 REF 3.270 REF NOTES CT5300 XGS­CT5300 11881A­CT5300 XMR202212EG21GL 10224A­2022EG21GL : REFERENCE BOM FOR SPECIFIC LABEL STOCK. PRINTABLE GLOSSY METALLIZED POLYESTER PERMANENT LABEL 1. MATERIAL. SUBSTITUTE WITH ORBCOMM APPROVAL ONLY. USE BRADY UL RECOMMENDED B-434 LABELS AND RIBBONS. SUBSTITUTE WITH ORBCOMM APPROVAL ONLY.2. LABEL MUST MEET THE FOLLOWING REQUIREMENTS:3. UL STANDARD: UL:969• UL FILE NO: MH17154.• PARTS TO BE MANUFACTURED IN COMPLIANCE WITH THE MOST CURRENT RoHS & REACH DIRECTIVE. 4. REFERENCE THE LATEST REVISION OF ARTWORK FILE SR402548-00X.SVG" FOR VARIANT LABEL DETAILS.5. REFERENCE DOC100190 FOR SERIAL NUMBERING AND IDENTIFICATION MARKING FORMATS.6. REFERENCE DOC100186 FOR PART NUMBERING FORMATS.7. REFER TO THE VARIANT TABLE ON PAGE 2 WHICH DETAILS PRINTING INFORMATION FOR BOXES 1-8.8. LOGO IS INSERTED IN THE CORRESPONDING ARTWORK VARIANT FILE.9. IN TEXT FORMAT, ADD UNIT PART NUMBER AND REVISION IN THE FORMAT OUTLINED IN VIEW A-A. 10. IN BAR CODE 128 FORMAT, ADD UNIT PART NUMBER IN THE FORMAT OUTLINED IN VIEW A-A. 11. IN TEXT FORMAT, ADD THE UNIT SERIAL NUMBER IN THE FORMAT "ABCD#YYWWXXXX".12. IN BAR CODE 128 FORMAT, ADD THE UNIT SERIAL NUMBER IN THE FORMAT "ABCD#YYWWXXXX"13. IN TEXT FORMAT, ADD THE 15-DIGIT IMEI NUMBER OR 14 DIGIT MEID NUMBER SCANNED FROM THE UNIT'S 14. CELLULAR MODEM MODULE. IN BAR CODE 128 FORMAT, ADD THE 15-DIGIT IMEI NUMBER OR 14 DIGIT MEID NUMBER SCANNED FROM THE 15. UNIT'S CELLULAR MODEM MODULE. IN TEXT FORMAT, ADD THE COMPLETE (19 OR 20 CHARACTERS) ICC ID (SIM) NUMBER SCANNED FROM THE UNIT 16. SIM CARD, UNIT CARD, OR A LOOK-UP TABLE. IN BAR CODE 128 FORMAT, ADD THE COMPLETE (19 OR 20 CHARACTERS) ICC ID (SIM) NUMBER SCANNED FROM 17. THE UNIT SIM CARD, UNIT CARD, OR A LOOK-UP TABLE. ADD THE QR CODE TEXT STRING WITH COMMA SEPARATED FIELDS. IF A FIELD IS BLANK, USE TWO COMMAS (",,") 18. BEFORE THE NEXT FIELD. UNIT SERIAL NUMBER.• UNIT PART NUMBER & REVISION IN THE FORMAT OUTLINED IN VIEW A-A• ICC ID (SIM) • IMEI NUMBER• IN TEXT FORMAT, ADD THE COUNTRY OF MANUFACTURE.19. SEE VARIANT PRINTING TABLE, BOX 2 SEE VARIANT PRINTING TABLE, BOX 3 SEE VARIANT PRINTING TABLE, BOX 4 SEE VARIANT PRINTING TABLE, BOX 5 SEE VARIANT PRINTING TABLE, BOX 1 SEE NOTE 10 SEE NOTE 11 SEE NOTE 12 SEE NOTE 13 SEE NOTE 14 SEE NOTE 15 SEE NOTE 16 SEE NOTE 17 SEE NOTE 18 VIEW A-A CURRENT REVISION (EXAMPLE ONLY) COMPLETE PART NUMBER (EXAMPLE ONLY) SEE NOTE 9 THE LABEL ARTWORK SHOWN IN THIS VIEW IS FOR REFERENCE ONLY VARIANT SPECIFIC CERTIFICATONS SEE VARIANT PRINTING TABLE SEE NOTE 19 REVISIONS REVECO DESCRIPTIONDATE APPROVAL A7559 INITIAL RELEASE04-JUL-25B. HART VARIANT TABLE VARIANT PART NUMBER PART REVISION CHANGING VARIABLE SR402548-001ALBL CT53 MAIN ORBCOMM 2.395" x 3.27" CT5 3x x-WXYZ-S_R R SIZE D SR402548-000A REV CT53 ID LABEL TITLE: DO NOT SCALE FROM DRAWING MAIN SHEET 1 OF 2 ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DWG. NO. © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED MATERIAL THIRD ANGLE PROJECTION F.BOLO 2025-06-12 DATE CREATED DRAWN BY N/A SEE NOTE 1 FINISH VARIANT PRINTING TABLE UNIT PART# CELL MODEM TYPE BOX 1 MODEL NUMBER BOX 2 BLE FCC ID (BLUETOOTH) BOX 3 BLE IC ID (BLUETOOTH) BOX 4 FCC ID / LTE ID (CELLULAR) BOX 5 IC# / LTE IC# (CELLULAR) VARIANT SPECIFIC CERTIFICATIONS TO PRINT -X1XXGL LTE1CT5300 XGS-CT5300 (pending)11881A-CT5300(pending) XMR202212EG21GL10224A-2022EG21GL SIZE D SR402548-000A REV CT53 ID LABEL TITLE: DO NOT SCALE FROM DRAWING MAIN SHEET 2 OF 2 ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DWG. NO. © ORBCOMM Inc. 2020 PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS OTHERWISE SPECIFIED MATERIAL THIRD ANGLE PROJECTION F.BOLO 2025-06-12DATE DRAWN BY N/A SEE NOTE 1 FINISH

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and RSS-102 Annex C – MPE Calculation; Date: August 2023 Choose Scandinavian trust RADIO TEST REPORT Report ID Project ID REP052225 PRJ0061485 Type of assessment: MPE Calculation report Manufacturer: ORBCOMM License Corp. Product description: Hardware Version Identification Number (HVIN): Industrial Assets Tracking & management System CT5300 FCC IDs: ISED certification numbers: XMR202212EG21GL, XGS-CT5300 10224A-2022EG21GL, 11881A-CT5300 Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: March 10, 2026 Tarek Elkholy, EMC/RF Specialist Prepared by Signature Section 1 MPE calculation Report reference ID: REP052225 Page 2 of 4 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Section 1 MPE calculation Report reference ID: REP052225 Page 3 of 4 Evaluation summary 1.1 MPE calculation for simultaneous transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1) — Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 4 For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 1.1-2: Table 4 to RSS-102 — RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz Section 1 MPE calculation Report reference ID: REP052225 Page 4 of 4 References, definitions and limits, continued Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) 1.1.2 EUT technical information Transmitter 1 (GSM-850) Transmitter 2 (BLE) Prediction frequency 848.8 MHz 2480 MHz Antenna type Dipole Inverted L Antenna gain 2.7 dBi 4.2 dBi Maximum transmitter conducted power 33 dBm 9.1 …

Text truncated - open the document above for the full version.

GT12 BLE Antenna Datasheet (product model number: GT12G1, GT12N4, CT5300) •Antenna type: Inverted L Antenna Page 1 Technical data Dimensions (L x W x H)54.8 mm × 54.8 mm x 10.6mm Temperature range -40 ~ +85°C Frequency range 2.4 – 2.485 GHz Impedance50 Ohm VSWR ≤ 1.63:1 Gain (Realized gain)Phi: 3.99 dBi max. Theta: 4.20 dBi max. PolarizationLinear ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 Realized Gain Page 2 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 M a x Antenna Radiation Patterns Page 3 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.4 GHz Theta Polarization Phi Polarization Antenna Radiation Patterns Page 4 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.4425 GHz Theta Polarization Phi Polarization Antenna Radiation Patterns Page 5 ORBCOMM Inc. 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Tel: +1-703-433-6300 2.485 GHz Theta Polarization Phi Polarization

GT12xx/CT5300 Cellular Antenna Page 1 Electronic Specification Frequency range Low:698 -960 MHz High:1710 -2690 MHz Impedance50 Ohm VSWRLow:<6 High:<3.3 PolarizationLinear Impedance50 Ohm Gain (with mismatching attenuation) 2.7dBi max. 698 –960MHz 3.0dBi max 1700 --1900MHz 3.0dBi max 1900 –2690MHz Mechanical Specification DimensionEmbedded in PCB53mm*14mm ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 GT12 Cellular Antenna Gain (without matching) Page 2 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 GT12 Cellular Antenna Gain (without matching) Page 3 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 GT12 Cellular Antenna Total Gain after impedance matching Page 4 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Freq (MHz) Ant G (dBi) Mismatchinng Antennuation (dB)Total Gain (dBi) 699-0.5-0.5-1 7461.9-0.51.4 824-0.2-0.5-0.7 850-0.6-0.5-1.1 870-3.9-0.5-4.4 900-8.2-0.5-8.7 960-11.7-0.5-12.2 17101.30.81.6 17501.2-0.81.5 18002.2-0.81.4 18502.6-0.81.8 19002.65-0.81.85 19503-0.82.2 20003-0.82.2 20502.6-0.81.8 21002.2-1.30.9 21501.3-1.30 21701.9-1.30.6 23004.1-1.32.8 23504.3-1.33 24004.3-1.33 24503.9-1.32.6 25004.1-1.32.8 25503.3-1.32 26002.8-1.31.5 26501.8-1.30.5 27002.8-1.31.5 GT12 Cellular Antenna Radiation Pattern Page 5 ORBCOMM Inc. 395 W PassaicStreet, Suite 325, Rochelle Park, NJ 07662 USA Tel:+1-703-433-6300 Low Band Mid to High Band

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.247 and RSS-247; Date: Feb 12, 2024 C h o o s e S c a n d i n a v i a n t r u s t DRAFT TEST REPORT Report ID: Project number: REP051834-1 PRJ0061485 Type of assessment: Final product testing Type of radio equipment: Bluetooth Device Equipment class: DTS Applicant: Description of product: ORBCOMM License Corp. Industrial Assets Tracking & management System Model/HVIN: Product marketing name (PMN): CT5300 CT5300 FCC identifier: ISED certification number: FCC ID: XGS-CT5300 IC: 11881A-CT5300 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247  RSS-247, Issue 4, July 2025, Section 5 Date of issue: March 10, 2026 Tarek Elkholy, EMC/RF Specialist Tested by Andrey Adelberg, Senior EMC/RF Specialist Reviewed by Signature Report reference ID: REP051834-1 Page 2 of 38 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP051834-1 Page 3 of 38 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Model variant declaration ........................................................................................................................................................................................ 5 2.4 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Information provided by the applicant ...........................................................................................................................................…

Text truncated - open the document above for the full version.