XMR2024BG950SGLLPWA module

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Quectel Wireless Solutions Company Limited Address Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District Shanghai 200233 China FRN 0018988279 Grantee Code XMR FCC ID XMR2024BG950SGL Authorized Contact Name Jean Hu Contact Email [email protected] Contact Phone +8602150086326 Ext: 800 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Quectel Wireless Solutions Company Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Quectel Wireless Solutions Company Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 07/03/2024 Print Name: Jean Hu Title: Certification Section Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Quectel Wireless Solutions Company Limited Quectel Wireless Solutions Company Limited Date: 07/03/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: XMR2024BG950SGL To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Quectel Wireless Solutions Company Limited. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

Quectel Wireless Solutions Company Limited Date: 07/03/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: XMR2024BG950SGL LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM Tune Up Procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

Quectel Wireless Solutions Company Limited Cover Letter-Modular Approval Date: 2024-07-03 Gentlemen: There’s a Module that would like to have your authorization as a modular approval. The specific product as below, Module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company Quectel Wireless Solutions Company Limited Model Name LPWA module Model Number BG950S-GL FCC ID XMR2024BG950SGL Requirement of FCC KDB996369 Comply（Yes/No） 1.The modular transmitter must have its own RF shielding. Yes The EUT provides the RF shielding. See EUT photo. 2.The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes The EUT has its buffered modulation. Please see the Schematic Diagram. 3.The modular transmitter must have its own power supply regulation. Yes The EUT has its own power supply regulation, please see the Schematic Diagram. 4.The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Yes The EUT meets the FCC antenna requirements. 5.The modular transmitter must be tested in a stand -alone configuration, i.e., the module must not be inside another device during testing. Yes The EUT was tested with a test board, please see test report and setup photo 6.The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed Yes Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label Quectel Wireless Solutions Company Limited module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XMR2024BG950SGL” or “Contains FCC ID: XMR2024BG950SGL” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. the end product. 7.The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Yes The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. 8.The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In additio n, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Yes The EUT complies with RF exposure requirement. Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 1 of 7 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2407002557MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: LPWA module Model No.: BG950S-GL Trade Mark: Quectel FCC ID: XMR2024BG950SGL Standards: FCC 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2024-07-02 Date of Issue: 2024-08-20 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 2 of 7 1 Version Revision Record Version Chapter Date Modifier Remark 01 2024-08-20 Original Authorized for issue by: Kevin Lan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 3 of 7 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 4 of 7 2 General Information 2.1 Client Information Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1336. Test Firm Registration Number: 787754. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 5 of 7 2.3 General Description of EUT EUT Description: LPWA module Model No.: BG950S-GL Trade Mark: Quectel Hardware Version: R1.0 Software Version: BG950SGLAAR01A01 Power Supply: Typical voltage:3.3V Antenna Type: External, Integrated Antenna Gain: LTE Cat M1 Band 2: 1.59dBi LTE Cat M1 Band 4: 2dBi LTE Cat M1 Band 5: 2.53dBi LTE Cat M1 Band 12: 3.95dBi LTE Cat M1 Band 13: 4.45dBi LTE Cat M1 Band 25: 1.59dBi LTE Cat M1 Band 26: 3.19dBi LTE Cat M1 Band 66: 2dBi LTE Cat M1 Band 85: 3.95dBi LTE Cat NB2 Band 2: 1.59dBi LTE Cat NB2 Band 4: 2dBi LTE Cat NB2 Band 5: 2.53dBi LTE Cat NB2 Band 12: 3.95dBi LTE Cat NB2 Band 13: 4.45dBi LTE Cat NB2 Band 17: 3.95dBi LTE Cat NB2 Band 25: 1.59dBi LTE Cat NB2 Band 26: 3.19dBi LTE Cat NB2 Band 66: 2dBi LTE Cat NB2 Band 85: 3.95dBi Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255703 Page: 6 of 7 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255701 Page: 1 of 61 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2407002557MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: LPWA module Model No.: BG950S-GL Trade Mark: Quectel FCC ID: XMR2024BG950SGL Standards: 47 CFR Part 2 47 CFR Part 22 47 CFR Part 24 47 CFR Part 27 47 CFR Part 90 Date of Receipt: 2024-07-02 Date of Test: 2024-07-02 to 2024-08-20 Date of Issue: 2024-08-20 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255701 Page: 2 of 61 1 Version Revision Record Version Chapter Date Modifier Remark 01 2024-08-20 Original Authorized for issue by: Kevin Lan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255701 Page: 3 of 61 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ............................................................................................................... 5 2.1 LTE Cat M1 Band 5/ LTE Cat M1 Band 26(824~849 MHz)/ LTE Cat NB2 Band 5/ LTE Cat NB2 Band 26(824~849 MHz)...................................................................... 5 2.2 LTE Cat M1 Band 2 / LTE Cat M1 Band 25/ LTE Cat NB2 Band 2/ LTE Cat NB2 Band 25 ................................................................................................................ 6 2.3 LTE Cat M1 Band 4 / LTE Cat M1 Band 66/ LTE Cat NB2 Band 4/ LTE Cat NB2 Band 66 ................................................................................................................ 7 2.4 LTE Cat M1 Band 12 / LTE Cat M1 Band 85/ LTE Cat NB2 Band 12/ LTE Cat NB2 Band 85/ LTE Cat NB2 Band 17 ........................................................................... 8 2.5 LTE Cat M1 Band 13/ LTE Cat NB2 Band 13 ................................................... 9 2.6 LTE Cat M1 Band 26(814~824 MHz)/ LTE Cat NB2 Band 26(814~824 MHz) 10 3 General Information ..................................................................................................... 11 3.1 Details of Client ............................................................................................... 11 3.2 Test Location .................................................................................................. 11 3.3 Test Facility ..................................................................................................... 11 3.4 General Description of EUT ............................................................................ 12 3.5 Test Mode ....................................................................................................... 13 3.6 Test Environment ............................................................................................ 13 3.7 Description of Support Units ........................................................................... 13 3.8 Technical Specification ................................................................................... 14 3.9 Test Frequencies ............................................................................................ 16 4 Description of Tests ..................................................................................................... 24 4.1 Conducted Output Power ................................................................................ 24 4.2 Effective (Isotropic) Radiated Power of Transmitter ........................................ 25 4.3 Occupied Bandwidth ....................................................................................... 26 4.4 Band Edge at Antenna Terminals ................................................................... 27 4.5 Spurious And Harmonic Emissions at Antenna Terminal ................................ 28 4.6 Peak-Average Ratio ........................................................................................ 29 4.7 Field Strength of Spurious Radiation............................................................... 30 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255701 Page: 4 of 61 4.8 Frequency Stability / Temperature Variation ................................................... 52 4.9 Test Setups ..................................................................................................... 53 4.9.1 Test Setup 1 ............................................................................................. 53 4.9.2 Test Setup 2 ............................................................................................. 53 4.9.3 Test Setup 3 ............................................................................................. 54 4.10 Test Conditions ............................................................................................... 55 5 Main Test Instruments ................................................................................................. 57 6 Measurement Uncertainty............................................................................................ 60 7 Test Setup Photo ......................................................................................................... 61 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700255701 Page: 5 of 61 2 Test Su…

Text truncated - open the document above for the full version.

LTE FDD Band 26b, Nominal Bandwidth: 5MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 26b, Nominal Bandwidth: 10MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 26b cross rule, Nominal Bandwidth: 15MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 1.4MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 10.29 13 Pass MCH 6 0 10.23 13 Pass HCH 6 0 10.19 13 Pass 16QAM LCH 5 0 10.58 13 Pass MCH 5 0 10.53 13 Pass HCH 5 0 10.65 13 Pass LTE FDD Band 66, Nominal Bandwidth: 3MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 10.33 13 Pass MCH 6 0 9.99 13 Pass HCH 6 0 10.25 13 Pass 16QAM LCH 5 0 10.60 13 Pass MCH 5 0 10.58 13 Pass HCH 5 0 10.69 13 Pass LTE FDD Band 66, Nominal Bandwidth: 5MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 9.86 13 Pass MCH 6 0 9.69 13 Pass HCH 6 0 9.80 13 Pass 16QAM LCH 5 0 10.46 13 Pass MCH 5 0 11.19 13 Pass HCH 5 0 10.49 13 Pass LTE FDD Band 66, Nominal Bandwidth: 10MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 9.90 13 Pass MCH 6 0 9.64 13 Pass HCH 6 0 9.77 13 Pass 16QAM LCH 5 0 10.45 13 Pass MCH 5 0 10.32 13 Pass HCH 5 0 10.17 13 Pass LTE FDD Band 66, Nominal Bandwidth: 15MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 9.56 13 Pass MCH 6 0 9.37 13 Pass HCH 6 0 9.35 13 Pass 16QAM LCH 5 0 9.60 13 Pass MCH 5 0 9.83 13 Pass HCH 5 0 9.54 13 Pass LTE FDD Band 66, Nominal Bandwidth: 20MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 9.25 13 Pass MCH 6 0 9.46 13 Pass HCH 6 0 9.42 13 Pass 16QAM LCH 5 0 9.68 13 Pass MCH 5 0 9.89 13 Pass HCH 5 0 9.60 13 Pass LTE FDD Band 66, Nominal Bandwidth: 1.4MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 3MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 5MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 10MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 15MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 66, Nominal Bandwidth: 20MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 85, Nominal Bandwidth: 5MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 9.06 13 Pass MCH 6 0 8.87 13 Pass HCH 6 0 8.94 13 Pass 16QAM LCH 5 0 8.94 13 Pass MCH 5 0 9.33 13 Pass HCH 5 0 8.96 13 Pass LTE FDD Band 85, Nominal Bandwidth: 10MHz Modulation Channel RB Configuration Test result (dB) Limit (dB) Verdict Size Offset QPSK LCH 6 0 8.96 13 Pass MCH 6 0 10.66 13 Pass HCH 6 0 8.87 13 Pass 16QAM LCH 5 0 8.83 13 Pass MCH 5 0 8.88 13 Pass HCH 5 0 8.79 13 Pass LTE FDD Band 85, Nominal Bandwidth: 5MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0 LTE FDD Band 85, Nominal Bandwidth: 10MHz QPSK Low channel-6 RB offset 0 16QAM Low channel-5 RB offset 0 QPSK Middle channel-6 RB offset 0 16QAM Middle channel-5 RB offset 0 QPSK High channel-6 RB offset 0 16QAM High channel-5 RB offset 0

LTE Cat NB Appendix-Band-edge LTE FDD Band 2, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 2, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 4, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 4, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 5, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 5, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 12, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 12, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 13, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 13, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 17, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 17, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 25, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 25, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 26a, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 26a, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 26b, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Band 26b, SCS: 15KHz QPSK Low channel-1@0 QPSK High channel-1@max QPSK Low channel- 12@0 QPSK High channel-12@0 LTE FDD Band 66, SCS: 3.75KHz QPSK Low channel-1@0 QPSK High channel-1@max BPSK Low channel-1@0 BPSK High channel-1@max LTE FDD Ba…

Text truncated - open the document above for the full version.