XMR2024HCM511SEBluetooth Module

HCM511S-E Hardware Design Short-Range Module Series Version: 1.0.0 Date: 2024-06-22 Status: Preliminary Short-Range Module Series HCM511S-E_Hardware_Design 1 / 55 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Short-Range Module Series HCM511S-E_Hardware_Design 2 / 55 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2023. All rights reserved. Short-Range Module Series HCM511S-E_Hardware_Design 3 / 55 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any terminal or mobile incorporating the module. Manufacturers of the terminal should notify users and operating personnel of the following safety information by incorporating these guidelines into all manuals of the product. Otherwise, Quectel assumes no liability for customers’ failure to…

Text truncated - open the document above for the full version.

(Quectel Wireless Solutions Company Limited ) To: Federal Communications Commission Date: 2024/8/13 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) [Quectel Wireless Solutions Company Limited ] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) [ Quectel Wireless Solutions Company Limited ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCC ID: XMR2024HCM511SE If you have any questions, please feel free to contact me Contact Person: Jean Hu Position in the Company: Quectel Wireless Solutions Company Limited Date of Signature: 2024/8/13 ___________________________ Signatory (signature of the applicant)

Quectel Wireless Solutions Company Limited LETTER OF AGENCY Date:2024/8/12 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID: XMR2024HCM511SE To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name:Jean Hu Company: Quectel Wireless Solutions Company Limited Job Title:Project Manager Email:[email protected] Phone NO.: +86-2150086326

Quectel Wireless Solutions Company Limited Declaration of the Modular Approval Applicant / Grantee Quectel Wireless Solutions Company Limited FCC ID: XMR2024HCM511SE Model: HCM511S-E The single module transmitter has been evaluated then tested meeting the requirements under Part 15C Section 212 as below: Modular approval requirement EUT Condition Comply The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio elements of the modular transmitter have their own shielding. YES (b) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. The modular has buffered data inputs, it is integrated in chip. Please see schematic.pdf YES (c)The modular transmitter must have its own powersupply regulation. All power lines derived from the host device are regulated before energizing other circuits internal to the HCM511S- E. Please see schematic.pdf YES (d) The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. An external non-standard port antenna has equipped with the module that complies with 15.203 requirements. The more detailed information, Please see the Antenna Specification and External Photos. YES (e)The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that The HCM511S-E was tested in a stand‐ alone configuration via a PCMCIA extender. Please see spurious set‐up YES Quectel Wireless Solutions Company Limited length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i))mustnotbeinsideanotherdeviceduringtesting. (f)The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. The label position of HCM511S-E is clearly indicated. If the FCC ID of the module cannot be seen when it is installed, then the host label must include the text: Contains FCC ID: XMR2024HCM511SE. Please see the label.pdf YES (g) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any suchrequirements. A copy of these instructions must be included in the application for equipmentauthorizationrequirements,whicharebasedonthei ntendeduse/configurations. The HCM511S-E is compliant with all applicable FCC rules. Detail instructions are given in the User Manual. YES (h)The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The HCM511S-E is approved to comply with the applicable RF exposure requirement, please see the MPE evaluation with 20cm as the distance restriction. YES Signature: Printed Name:Jean Hu Date:2024/8/13 Company: Quectel Wireless Solutions Company Limited Job Title:Project Manager Email:[email protected] Phone NO.: +86-2150086326

Quectel Wireless Solutions Company Limited Request for Confidentiality Date: _August 13, 2024 Subject: Confidentiality Request for: _____ FCC ID: XMR2024HCM511SE， Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description Short Term Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ___Quectel Wireless Solutions Company Limited _has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ____ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, Signature: Printed Name:Jean Hu Date:August 13, 2024 Company: Quectel Wireless Solutions Company Limited Job Title:Project Manager Email:[email protected] Phone NO.: +86-2150086326

EUT Appearance Report No.: R2406A0699 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 3 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance a: EUT EUT Appearance Report No.: R2406A0699 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 3 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. b: External Antenna EUT Appearance Report No.: R2406A0699 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 3 of 3 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Picture 1: Constituents of EUT

Internal photo FCC ID: XMR2024HCM511SE Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 1 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Internal photo FCC ID: XMR2024HCM511SE Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 2 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd.

Prepared by: Wei Fangying Approved by: Fan Guangchang Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE TEST REPORT Applicant Quectel Wireless Solutions Company Limited FCC ID XMR2024HCM511SE Product Bluetooth Module Brand Quectel Model HCM511S-E Report No. R2406A0699-M1 Issue Date August 12, 2024 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. MPE Test Report Report No.: R2406A0699-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 2 of 7 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 3 1.1 Notes of the Test Report ............................................................................................................ 3 1.2 Test Facility ................................................................................................................................ 3 1.3 Testing Location......................................................................................................................... 3 1.4 Laboratory Environment ............................................................................................................ 3 2 Description of Equipment Under Test ............................................................................................... 4 3 Maximum Output Power and Antenna Gain ..................................................................................... 5 4 MPE Limit .......................................................................................................................................... 6 5 RF Exposure Evaluation Result ........................................................................................................ 7 MPE Test Report Report No.: R2406A0699-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 3 of 7 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18  C, Max. = 25  C Relative humidity Min. = 20%, Max. = 80% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2406A0699-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 4 of 7 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment Under Test Client Information Applicant Quectel Wireless Solutions Company Limited Applicant address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China, 200233 Manufacturer Quectel Wireless Solutions Company Limited Manufacturer address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China, 200233 General Technologies EUT Description Model HCM511S-E SN E1N24EL10000008 Hardware Version R1.0 Software Version NA Frequency Band TX (MHz) RX (MHz) Bluetooth LE 2400 ~ 2483.5 2400 ~ 2483.5 Date of Testing July 6, 2024 ~ July 27, 2024 Date of Sample Received July 2, 2024 Note: 1. The EUT is sent from the applicant to Eurofins TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by Eurofins TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. MPE Test Report Report No.: R2406A0699-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 5 of 7 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 3 Maximum Output Power and Antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Band Maximum Output Power Antenna Gain (dBi) Numeric Gain (dBm) (mW) Bluetooth (Low Energy) 8.16 6.55 0.20 1.05 MPE Test Report Report No.: R2406A0699-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 6 of 7 This report shall not be reproduced except in full, without the written ap…

Text truncated - open the document above for the full version.

Product OC: YEBT038WFA Version: 0.1 Date: 2024-05-08 Status: Preliminary Product Name: External Wi-Fi/BT Antenna Key Features: Frequency band: 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Peak efficiency: 50.12 % Dimensions: Φ13 mm × 195 mm RoHS Compliant Antenna Datasheet Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 1 / 36 Overview Quectel Wi-Fi/BT antenna covers BT, 2.4 GHz, 5 GHz, and up to 7 GHz bands, fully satisfying customers’ requirements for BT, Wi-Fi 5, Wi-Fi 6, and Wi-Fi 6E/Wi-Fi 7. There are various antenna types, including built-in FPC/PCB antenna, ceramic patch antenna, and other external antennas of different shapes or sizes. The antenna performance meets the customers’ demands for efficiency, gain, and radiation and ensures the superior experience of the customers’ products in use. Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 2 / 20 Contents Overview ...................................................................................................................................................... 1 Contents ...................................................................................................................................................... 2 1 Specification ...................................................................................................................................... 3 1.1. Electrical ..................................................................................................................................... 3 1.2. Mechanical & Environmental ..................................................................................................... 4 2 Drawing .............................................................................................................................................. 5 3 Detailed Performance ....................................................................................................................... 6 3.1. S-Parameter Test ....................................................................................................................... 6 3.1.1. VSWR .............................................................................................................................. 6 3.1.2. Return Loss ..................................................................................................................... 8 3.2. Radiation Performance Test ....................................................................................................... 9 3.2.1. Efficiency ......................................................................................................................... 9 3.2.2. Average Gain ................................................................................................................ 10 3.2.3. Peak Gain .......................................................................................................................11 3.2.4. 3D & 2D Radiation Pattern ............................................................................................ 12 3.2.4.1. Test Condition: Free Space .................................................................................. 12 4 Packaging ........................................................................................................................................ 15 Contact Us................................................................................................................................................. 17 Legal Notices ............................................................................................................................................ 18 Revision History ....................................................................................................................................... 20 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 3 / 20 1 Specification Test Condition: Free Space 1.1. Electrical Electrical Frequency Range 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Antenna Type Dipole Band Specification Band Wi-Fi 2G BT Wi-Fi 5G Wi-Fi 7G Freq. (MHz) 2400 - 2500 5150 - 5250 5250 - 5350 5470 - 5725 5725 - 5850 5925-7125 Max. VSWR 2.0 2.8 2.8 2.7 2.4 2.3 Max. Return Loss (dB) -9.3 -6.6 -6.4 -6.7 -7.6 -8.0 AVG Eff. (%) 40.6 40.6 38.6 33.8 28.7 33.4 AVG Gain (dB) -4.0 -3.9 -4.1 -4.7 -5.4 -4.8 Max. Peak Gain (dBi) 0.2 （2500MHz） -0.7 （5155MHz） -0.8 （5260MHz） -1.2 （5480MHz） -1.5 （5820MHz） 1.6 （6915MHz） VSWR ≤ 2.8 Return Loss ≤ -6.4 dB Peak Gain ≤ 1.6 dBi Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 4 / 20 1.2. Mechanical & Environmental Mechanical Antenna Dimensions Φ13 mm × 195 mm Material & Color TPEE & Black Connector Type RP SMA Male Mounting Type Terminal Weight Typ. 18 g Environmental Operation Temperature -40 °C to +85 °C Storage Temperature -40 °C to +85 °C RoHS Compliant Yes Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 5 / 20 2 Drawing Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 6 / 20 3 Detailed Performance ⚫ Network Analyzer: Keysight E5071C (Device number: QTB6331E; Calibration date: 2023-12-27; Due date:2025-06-26) ⚫ Chamber: OTA RayZone 2800 GTS (Device number: QTA0709; Calibration date: 2023-07-14; Due date:2024-07-13) ⚫ Testing Software: Libra ⚫ Manufacturer: Quectel Wireless Solutions (Changzhou) Co., Ltd. Address: No.8 Nanhu West Road, Wujin District, Changzhou City, Jiangsu Province, China 3.1. S-Parameter Test 3.1.1. VSWR 1 2 3 4 5 6 7 8 9 10 200022002400260028003000320034003600380040004200440046004800500052005400560058006000620064006600680070007200 VSWR Frequency(MHz) VSWR Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 7 / 20 VSWR Frequency (MHz) 2400 2500 5150 5155 5250 5260 5350 5470 5480 VSWR 2.0 1.4 2.5 2.5 2.8 2.8 2.8 2.7 2.7 Frequency (MHz) 5725 5820 5850 5925 6325 6725 6915 7125 VSWR 2.0 2.4 2.4 2.3 1.6 1.3 1.1 1.7 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 8 / 20 3.1.2. Return L…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Quectel Wireless Solutions Company Limited FCC ID XMR2024HCM511SE Product Bluetooth Module Brand Quectel Model HCM511S-E Report No. R2406A0699-R1V2 Issue Date September 3, 2024 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2023). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2406A0699-R1V2 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 76 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ............................................................................................................................... 5 1.1. Notes of the Test Report ......................................................................................................... 5 1.2. Test Facility ............................................................................................................................. 5 1.3. Testing Location ...................................................................................................................... 5 2. General Description of Equipment Under Test ............................................................................... 6 2.1. Applicant and Manufacturer Information ................................................................................ 6 2.2. General Information ................................................................................................................ 6 3. Applied Standards ........................................................................................................................... 7 4. Test Configuration ........................................................................................................................... 8 5. Test Case Results .......…

Text truncated - open the document above for the full version.